Fujitsu FJBC-GP User's Manual
Contents
1. LED is on when the battery charger is connected to a plugged in AC adapter The two Charge Indicator LEDs show the charging status ofthe battery connected to the charger or the condition of the charger itself as shown in Table 1 Charge Indicator Charging Condition Flashes orange Standing by for charging Steady orange Charging Steady green Charging is complete Steady red Battery failure Flashing red Charger failure No light Battery not connected Table 1 Indicator Status e If the charger detects that something is wrong with the battery the Charging Indicator LED will turn a steady red If this happens immediately remove the battery from the charger e If the battery charger detects a failure in its charging circuit the Charging Indicator LED will blink red If this happens immediately disconnect the AC adapter and remove the battery from the charger The following items can affect the battery charger s performance After a battery has been charging for a period as noted below the battery charger will stop charging regardless ofthe charge level and the Charge Indicator LED will turn green This is a safety feature to prevent damage to the battery Battery Capacity Charging Time Less than 2500 mAh 5 hours 2500 mAh to 4100 mAh 8 hours Over 4100 mAh 12 hours When a battery has been left unused for a long time it will take longer to charge When the ambient temperat2. Fujitsu Computer Systems Corporation Battery Charger User s Guide This user s guide contains information on your battery charger We strongly recommend that you read this guide before using the battery charger even if you are already familiar with computers BATTERY CHARGER COMPONENTS Battery Battery Connector 1 gt Connector 2 Power Indicator LED AC Adapter Connector Charge Indicator LEDs Figure 1 Battery Charger Components Power Indicator LED The Power Indicator LED is on when power is being supplied from the AC adapter e This charger is designed only for charging Fujitsu Lithium ion battery packs that have the proper mating connector If you have questions check your system User s Guide or our accessories Web site to ensure that you are using the correct charger Use only the system AC adapter UL Listed Class 2 AC adapter with output rating of 16V dc minimum 2 54 Charge Indicator LEDs The Charge Indicators show the condition of the battery being charged Table 1 on page 3 shows the LED color and its relation to the charging status Battery Connector 1 Battery connector 1 is used to connect a battery to the charger Battery Connector 2 Battery connector 2 is used to connect a battery to the charger AC Adapter Connector The AC Adapter Connector is used to connect power to the battery charger via the AC adapter BATTERY CHARGER OPERATION The Power Indicator
3. ed 16 Vdc 2 5A Operating Temperature 5 C 35 C Operating Humidity 10 to 90 Maximum Outer 3 9 x 3 54 x 1 2 100 mm x Dimensions 90 mm x 30 mm Weight 0 5 Ibs 230g N FE DECLARATION OF CONFORMITY according to FCC Part 15 Responsible Fujitsu Computer Systems Corporation Party Name Address 1250 E Arques Avenue M S 122 Sunnyvale California 94085 Telephone 408 746 6000 Declares that product Battery Charger Model FJBC GP FCS Part Number FPCBC26 Complies with Part 15 of the FCC Rules This device complies with Part 15 of the FCC rules Operations are subject to the following two conditions 1 This device must not be allowed to cause harmful interference 2 This device must accept any interference received including interference that may cause undesired operation Declaration of Conformity Model Name Battery Charger FJBC GP Conformance to Directive s Product Standard 89 336 EEC and 73 23 EEC FCC Notices Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accor dance with the instructions may cause harmful interference to radio commu nications However there is no guarantee that interference will not occur in a particular installation If this equipment does cau
4. ery shown is for illustration only your battery may appear different Figure 3 Connecting the battery CARE AND MAINTENANCE Never connect the battery charger to a physically defective battery or use a defective charger When the battery charger is not being used for charging be sure to disconnect the AC adapter and remove any battery connected to the charger to avoid the chance of fire or equipment failure When disconnecting the AC adapter do not pull on the cable to remove the adapter Always remove by grasping the plug body Ifthe battery charger smokes smells strange heats abnormally or makes noise immediately disconnect the AC adapter and contact your Fujitsu reseller see Fujitsu Computer Systems Contact Information below It is normal for the charger to become slightly warm during charging Do not use the battery charger in humid dusty or poorly ventilated places Do not use the battery charger if any foreign substance such as water dirt etc has gotten inside TECHNICAL SUPPORT Fujitsu Computer Systems Contact Information If you have problems you are unable to resolve consult your support representative toll free at 1 800 8FUJITSU 1 800 838 5487 E mail 8fujitsu us fujitsu com Web Site http www computers us fujitsu com support SPECIFICATIONS Specification Details 16V 40W f This unit is to be powered by Power Requirements the power supply UL Listed and class 2 adapter rat
5. se harmful interference to radio or television reception which can be determined by turning the equip ment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet that is on a different circuit than the receiver Consult the dealer or an experienced radio TV technician for help Shielded interconnect cables must be employed with this equipment to ensure compliance with the pertinent RF emission limits governing this device DOC Industry Canada Notices Notice to Users of Radios and Television This Class B digital apparatus meets all requirements of the Canadian Inter ference Causing Equipment Regulations CET appareil num rique de la class B respecte toutes les exigence du R gle ment sur le mat rial brouilleur du Canada Notice to All Users The Battery Charger can only be operated at a maximum ambient tempera ture of 35 C 95 F Warning Handling the cord on this product will expose you to lead a chemical known to the State of California to cause birth defects or other reproductive harm Wash hands after handling Fujitsu Computer Systems Corporation 1250 E Arques Avenue M S 122 Sunnyvale California 94085 For more information call 1 800 FUJITSU or visit our Web site at
6. ure is low it will take longer to charge a battery Ifthe temperature of a battery connected to the charger is extremely high or low the battery charger will standby for charg ing until the battery returns to normal temperature This is a safety feature designed to prevent damage to the battery USING THE BATTERY CHARGER To charge a battery follow these steps 1 Connect the battery charger to the AC adapter 2 Plug the AC adapter into an AC outlet Figure 2 3 The Power Indicator LED will light up and the Charging Indi cator LED s will flash orange once 4 When the Charging Indicator LED s turns off align the plastic key pin of the battery connector with the corresponding guide in the battery socket Be very careful to align the battery and charger properly Figure 3 e The charger can have two batteries con nected at the same time but it charges only one at a time The battery that was con nected first is charged first The second bat tery is held in a wait status until the first battery is completely charged Charging time varies depending on the environmental conditions such as tempera ture or deterioration of the battery s 5 The Charging Indicator LED s will turn orange when the battery s is being charged 6 The Charging Indicator LED s will turn green when charging is completed gt aS ES Figure 2 Connecting the AC Adapter Note that the batt
7. www shopfujitsu com For technical support call 1 800 8FUJITSU 1 800 838 5487 or e mail us at 8fujitsu us fujitsu com Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Ltd All other trademarks mentioned herein are the property of their respective owners Product description data reflects Fujitsu design objectives and is provided for comparative purposes actual results may vary based on a variety of factors Specifications are subject to change without notice O 2008 Fujitsu Computer Systems Corporation All rights reserved B5FY 8881 01EN 00 12
Download Pdf Manuals
Related Search