Frigidaire FPBG2277RF Owner's Manual
Contents
1. to Good the status has been reset 6 The Air Filter Reset will turn itself off after a few seconds 30 CARE amp CLEANING Protecting your investment Keeping your refrigerator clean maintains its appearance and prevents odor build up Wipe up any spills immediately and clean the freezer and fresh food compartments at least twice a year NOTE Do not use abrasive cleaners such as window sprays scouring cleansers flammable fluids cleaning waxes concentrated detergents bleaches or cleansers containing petroleum products on plastic parts interior doors gaskets or cabinet liners Do not use paper towels scouring pads or other abrasive cleaning materials e Never use metallic scouring pads brushes abrasive cleaners or strong alkaline solutions on any surface e Never use CHLORIDE or cleaners with bleach to clean stainless steel e Do not wash any removable parts in a dishwasher e Always unplug the electrical power cord from the wall outlet before cleaning L NOTE If you set your temperature controls to turn off cooling power to lights and other electrical components will continue until you unplug the power cord from the wall outlet e Remove adhesive labels by hand Do not use razor blades or other sharp instruments which can scratch the appliance surface e Do not remove the serial plate Removal of your serial plate voids your war2. 1 Open door to provide access to screw 2 Loosen screw 3 Adjust door to desired location Door to Desired Location Adjusting Door 4 Rotate door stop until it makes contact with the lower hinge INSTALLATION 5 Retighten screw Re tighter Screw Retighten Screw 6 Ensure door stops in desired location before resuming normal use To level the doors using the adjustable lower hinge select models 1 Remove all food items from door bins on door being adjusted 2 Open doors to 90 degrees 3 Loosen or remove screw Loosen or Remove Screw Bottom of Door Loosen Remove Screw where applicable b NOTE Adjustable hinge should only be used after doors have been leveled with rollers INSTALLATION 4 Lift the door while adjusting the washer To raise the door rotate washer clockwise when viewed from the bottom To lower door rotate washer counterclockwise when viewed from the bottom Washer Raising Lowering Door To adjust the flipper mullion 1 Loosen the screw located on the flipper mullion hinge q Flipper Mullion Screw Flipper a WA Mullion ww Hinge Adjusting Flipper Mullion Screw 2 Adjust flipper mullion height For proper connection with the flipper mullion guide there should be a separation about the thickness of a coin 0 060 inches or 1 5 mm between the guide and flipper mullion Flip
3. 4 Unscrew the three lower hinge screws and hinge if necessary To reinstall the right door reverse the above steps Lower Hinge Removal Once both doors are in place ensure they are aligned with each other and level Please see the Installation section for more details and replace the top hinge cover caution Be sure doors are set aside in a secure position where they cannot fall and cause personal injury or damage to the doors or handles Removing Freezer Drawer 1 Open freezer drawer 2 Remove drawer screws on right and left sides two screws on each side Remove Hex Head Drawer Remove Hex Head Drawer Remove Hex Head Drawer Screw Remove Hex Head Drawer Screw Drawer is heavy Use caution when lifting 3 Lift drawer up and out to remove 10 Installing Freezer Drawer 1 With lower slides pulled out hang drawer onto slide brackets ensuring pins on each side are fully inserted into slots on each side 0 o 0 i A o Fully Extend Drawer Slides p Enn 0 i Sot j 2 Reinstall four drawer screws two per side tighten down and close drawer C Install Screws 2 Each Side Cabinet 3 Check gasket seal around top bottom and sides of freezer drawer 4 If gasket is not sealed open drawer
4. and slightly loosen four drawer screws two on each side to allow drawer to rotate 5 Close drawer and recheck the seal on the gasket A Open the drawer grabbing by the sides in the center B Be careful not to rotate the drawer Grab Drawer Push E At Center Against From Both Freezer Sides Then Drawer Pull Drawer Out 6 Tighten four drawer screws 7 Recheck gasket seal 8 Install the toe grille by fitting into place Door Handle Mounting Instructions for Frigidaire 1 Remove handles from carton and any other protective packaging 2 Position fresh food handle end caps over upper and lower pre installed shoulder bolts A that are fastened into door ensuring the holes for the set screws are facing towards the opposite door 3 While holding handle firmly against door fasten upper and lower Allen set screws B with supplied Allen wrench 4 Repeat steps 2 and 3 to install opposite handle Ensure the holes for the set screws are facing towards the first door 5 Position freezer handle end caps over left and right pre installed shoulder bolts that are fastened to the door ensuring the holes for the set screws are facing down 6 While holding handle firmly against door loosely tighten right Allen set screw B with supplied Allen wrench until there is no gap between handle and door 7 Still holding the handle firmly to the door firmly tighten left Al
5. any exterior wrapping material immediately after the refrigerator is unpacked Children should never use these items to play Cartons covered with rugs bedspreads plastic sheets or stretch wrap may become airtight chambers and can quickly cause suffocation Proper Disposal of your Refrigerator or Freezer Risk of child entrapment Child entrapment and suffocation are not problems of the past Junked or abandoned refrigerators or freezers are still dangerous even if they will sit for just a few days If you are getting rid of your old refrigerator or freezer please follow the instructions below to help prevent accidents IMPORTANT SAFETY INSTRUCTIONS Proper Disposal of Refrigerators Freezers We strongly encourage responsible appliance recycling disposal methods Check with your utility company or visit www energystar gov recycle for more information on recycling your old refrigerator Before you throw away your old refrigerator freezer e Remove doors e Leave shelves in place so children may not easily climb inside e Have refrigerant removed by a qualified service technician A IMPORTANT CFC HCFC Disposal Your old refrigerator may have a cooling system that used CFCs or HCFCs chlorofluorocarbons or hydrochlorofluorocarbons CFCs and HCFCs are believed to harm stratospheric ozone if released to the atmosphere Other refrigerants may also cause harm to the environment if released to the
6. authorizes no person to change or add to any obligations under this warranty Obligations for service and parts under this warranty must be performed by Electrolux or an authorized service company Product features or specifications as described or illustrated are subject to change without notice USA Canada 1 800 944 9044 1 800 265 8352 Frigidaire Electrolux Canada Corp 10300 David Taylor Drive 2 Electrolux 5855 Terry Fox Way Charlotte NC 28262 Mississauga Ontario Canada L5V 3E4 36
7. discard cap 4 If you use copper tubing Slide brass compression nut then ferrule sleeve onto water supply line Push water supply line into water valve inlet as far as it will go 1 4 inch 6 mm Slide ferrule sleeve into valve inlet and finger tighten compression nut onto valve Tighten another half turn with a wrench DO NOT overtighten See Figure 1 If you use stainless steel tubing The nut and ferrule are already assembled on the tubing Slide compression nut onto valve inlet and finger tighten compression nut onto valve Tighten another half turn with a wrench DO NOT overtighten See Figure 2 5 With steel clamp and screw secure water supply line copper tubing only to rear panel of refrigerator as shown 6 Coil excess water supply line copper tubing only about 21 2 turns behind refrigerator as shown and arrange coils so they do not vibrate or wear against any other surface 7 Turn ON water supply at shutoff valve and tighten any connections that leak 8 Reconnect refrigerator to electrical power source 16 sax War k VOY Ay Soo A H z CEE Water Valve S MURIR N N TAYAN ja Water Valve Plastic Water Steel Tubing to Ice Clamp Maker Fill 4 yj Brass Tube Compression Nut Ferrule Sleeve Copper water line Water Valve Bracket Valve Inlet Copper water line from household water supply Include enough tubing in loop to allow moving refrigerator out
8. for cleaning Figure 1 Plastic Water Tubing Steel to Ice Maker F eee Fill Tube amg Ay Stainless S Steel oF water Line Water Valve Bracket YJ a Valve Inlet 6 ft Stainless Steel water line from household water supply Figure 2 FRIGIDAIRE amp FRIGIDAIRE GALLERY CONTROLS quick energy ice saver refrigerator temp IT l l V freezer temp Options may vary A red indicator light will be illuminated above most active features Touch the icon to activate the options below quick ice Increases the production of ice water filter Press and hold for three seconds to reset after filter change C F Touch to toggle display from Fahrenheit to Celsius default settings Press and hold for three seconds to reset all refrigera tor settings such as temp temp display and tones to their factory default settings Power on off Press and hold for three seconds to turn off the cooling system to clean the refrigerator It also turns off the ice maker The temperature displays will read OFF Energy Saver Keep this switch set on energy saver indicator light on for lowest energy usage If moisture appears on the cabinet between the doors pressing this button will turn the indicator light off and enable an electric heater used to reduce moisture on the cabinet between the doors IMPORTANT Pressing the system on off icon does not turn off power to your refrigerator You must unplug the
9. items from refrigerator compartment Turn automatic ice maker off and empty ice bucket even if you will only be gone a few days Remove all food and ice if you will be gone one month or more Turn the cooling system off see Controls section for location of On Off button and disconnect power cord Turn water supply valve to closed position Clean interior thoroughly Leave both doors open to prevent odors and mold build up Block doors open if necessary Remove all food and ice If using a handcart load from the side Adjust rollers all the way up to protect them during sliding or moving Pad cabinet to avoid scratching surface CARE amp CLEANING Replacing LED Lights select models Replacing Light Bulbs select models The fresh food compartments of your refrigerator may have LED lights Always use Frigidaire parts 1X CAUTION for replacement Wear gloves when replacing incandescent To replace LED Lights light bulbs to avoid getting cut 1 Unplug your refrigerator s power cord 1 Unplug your refrigerator s power cord 2 Remove lens cover 2 Wear protective gloves 3 Remove LED board 3 Remove light cover if necessary 4 Replace LED board and snap in place 4 Unscrew and replace old bulb with an assuring the light is facing in toward the appliance bulb of the same type and unit inside fresh food wattage normally 40 watts 5 Replace lens cover 5 Replace light cover if necessary 6 Plug in the refrigerator s pow
10. the filter housing Any spurts and sputters that occur as the system purges air out of the dispenser system are normal 7 Continue dispensing water for 3 4 minutes or until 1 5 gallons of water has flowed through the system You will likely need to empty and refill your glass several times 8 Turn On the ice maker 9 Press and hold the Water Filter reset button on the control panel for three seconds When the display changes from Red to Green the status has been reset 29 CHANGING THE FILTER Air filter select models Ordering replacement filters The air filter is located under the utility bin Order new filters by calling 877 808 4195 _ online at www frigidaire com store or through Replacing your PureAdvantage the dealer where you bought your refrigerator air filter You may want to consider ordering extra filters To ensure optimal filtering of refrigerator odors When you first install your refrigerator you should change the air filter every six months Air Filter Replacement cartridge the filter status light on the Touch Panel prompts part PAULTRA you to replace the filter after six months 1 Open the air filter door 2 Remove the old filter and discard it 3 Unpack the new filter and slide it into the housing 4 To close the air filter door push the top and bottom to lock the door closed 5 Press and hold the Air Filter Reset button on the control panel for three seconds When the display changes from Replace
11. wire signal arm 2 Remove the filter by pushing on the end face of the filter 3 Slide the old water filter cartridge straight out of the housing and discard it 4 Unpackage the new filter cartridge Using the alignment guide slide it gently into the filter housing until it stops against the snap in connector at the back of the housing 5 Push firmly until the cartridge snaps into place you should hear a click as the cartridge engages the snap in connector 6 Turn On the ice maker by lowering the wire Signal arm 7 Press and hold the Water Filter button on the Ice amp Water Dispenser control panel for three seconds When the display changes from Red to Green the status has been reset 8 After replacing the water filter and in order for the ice maker to work properly it is necessary to clear air from water filter tubing Once ice maker begins making ice allow the bucket to fill completely then discard the first TWO FULL buckets of ice It will take at least two days to completely fill the bucket on regular ice making mode or 11 2 days on fast ice mode FRIGIDAIRE PROFESSIONAL Locating the Filters Your refrigerator is equipped with water filtering system The water filter system filters all dispensed drinking water as well as the water used to produce ice Water Filter The water filter is located at the top right side of the fresh food compartment Replacing the Water Filter In general you should c
12. 2 and 3 to install opposite handle Ensure the holes for the set screws are facing towards the first door 5 Position freezer handle end over left and right pre installed handle mounts that are fastened to the door ensuring the holes for the set screws are facing down 6 While holding handle firmly against door loosely tighten far right Allen set screw B with supplied Allen wrench until there is no gap between handle and door 7 Still holding the handle firmly to the door firmly tighten far left NOTE Allen set screw B with supplied Allen wrench All set screws should be tightened so the screw is below 8 Retum to the far right Allen set the surface of the handle The handles should be drawn tight to freezer and refrigerator doors with no gaps Opening the opposite door while tightening the Allen screw makes installation easier The door handle may loosen over time or if it was installed improperly If this happens tighten the set screws on the handles screw B and firmly tighten with supplied Allen wrench 9 Firmly tighten the inside Allen set Screws A CAUTION Wear gloves and safety goggles Use extreme CAUTION when installing these handles 13 INSTALLING DOOR HANDLES Door Handle Mounting Mounting Refrigerator Handles Instructions for Frigidaire Professional 1 Remove handles from carton and any other protective packaging 2 Position fresh food handle end over upper and l
13. ER ON OFF DEFAULT SETTINGS X POWERPLUS POWERPLUS ICE FREEZE GOOD AIR ORDER FILTER REPLACE 101 D WATER ce FILTER REPLACE DOOR AJAR HIGH TEMP POWER FAIL REFRIGERATOR TEMP Epa A FREEZER TEMP A blue indicator light will be illuminated above most active features Touch the icon to activate the options below water filter Press and hold for three seconds to reset after filter change CE Touch to toggle display from Fahrenheit to Celsius Press and hold for three seconds to reset all refrigerator settings such as temp temp dis play and tones to their factory default settings Activates a faster rate for freezing food default settings powerplus freeze Press and hold for three seconds to turn off the cooling system to clean the refrigerator It also turns off the ice maker The temperature displays will read OFF Click Turns ice maker on and off Click and hold for 3 seconds gets into the ice cube size selection menu power on off ice maker on off IMPORTANT Pressing the system on off icon does not turn off power to your refrigerator You must unplug the power cord from the wall outlet Setting cooling temperatures Press the or indicator to adjust the temperature to the desired setting The temperature display will begin to blink with the first touch The display will time out after 10 seconds and return to the basic display Ala
14. FRIGIDAIRE Use amp Care TABLE OF CONTENTS Important Safety InstructiOns ccsceecee 2 Features at a Glance sonnen eaaa 4 Installations 5 Door Removal liSEitGtiOnS crenstennncs armen 9 Installing Door HandleSseee sess senenesereeee 11 Connecting Water SUpDly sscsecsscseereees 15 Controls cccseesscesesnsssereiennsnce EA 17 Automatic Ice Maker Teee 21 www frigidaire com USA 1 800 944 9044 Storage Features eeaeee eae E gna 22 Storing Food and Saving Energy 26 Normal Operating Sounds and Sights 27 CENNI the LEN e a a cer a 28 Ge E CE E Sil Beforeyvou Call leeeeere reef teee tren anche eaiciscaas 34 Major Appliance Warranty csccseeseeeees 36 www frigidaire ca Canada 1 800 265 8352 sTOZ Alenuel Z00Z677bZ IMPORTANT SAFETY INSTRUCTIONS A WARNING Please read all instructions before using this refrigerator For your Safety e DO NOT store or use gasoline or other flammable liquids in the vicinity of this or any other appliance Read product labels for warnings regarding flammability and other hazards e DO NOT operate the refrigerator in the presence of explosive fumes e Avoid contact with any moving parts of automatic ice maker e Remove all staples from the carton Staples can cause severe cuts and also destroy finishes if they come in contact with other appliances or furniture Definitions Athis is the safety alert symbol It is used to alert you to po
15. PERATING SOUNDS AND SIGHTS Understanding the sounds you may hear 5 NOTE Your new high efficiency refrigerator may introduce unfamiliar sounds These sounds Energy efficient foam in your refrigerator is normally indicate your refrigerator is operating not a sound insulator correctly Some surfaces on floors walls and kitchen cabinets may make these sounds more noticeable L NOTE The following is a list of major components i fri h they can I OT FEAE G E ORE During automatic defrost cycle a red glow cause in the back wall vents of your freezer A Evaporator Refrigerant through the compartment is normal evaporator may create a boiling or gurgling sound B Evaporator fan You may hear air being forced through the refrigerator by the evaporator fan C Defrost heater During defrost cycles water dripping onto the defrost heater may cause a hissing or sizzling sound After defrosting a popping sound may occur D Automatic ice maker When ice has been produced you will hear ice cubes falling into the ice bin Ice maker fan water valve activation and refrigerant gas fluid may create sounds from its operation E Electronic control amp automatic defrost control These parts can produce a snapping or clicking sound when turning the cooling system on and off F Condenser fan You may hear air being forced through the condenser G Compressor Modern high efficiency compressors run much faster than older models Th
16. Running water in order for the ice maker to work properly it is necessary to clear air from water filter tubing e Ice cubes stored too long may develop an Once ice maker begins making ice allow the odd flavor Empty the ice bin as explained bucket to fill completely then discard the below first TWO FULL buckets of ice It will take at least two days to completely fill the bucket on Quick ICE runcCHON regular ice making mode or 112 days on fast Your refrigerator is equipped with a Quick Ice ice mode Function that increases ice production This The ice maker produces approximately four function terminates automatically pounds of ice every 24 hours depending on Cleaning the ice maker usage conditions IMPORTANT A CAUTION Your ice maker is turned on at the factory If the water supply to your refrigerator is so it can work as soon as you install your softened be sure the softener is properly refrigerator If you cannot connect a water supply lift the ice maker s wire signal arm to turn it off Otherwise the ice maker s fill valve may make a loud chattering noise when it attempts to operate without water maintained Chemicals from a water softener can damage the ice maker Clean the ice maker and ice bin at regular intervals especially prior to vacation or moving Turning the ice maker on and off 1 Turn off the ice maker Ice production is controlled by lifting lowering 2 Remove the ice bin the ice maker s wire si
17. STOMER S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN CLAIMS BASED ON IMPLIED WARRANTIES INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD ALLOWED BY LAW BUT NOT LESS THAN ONE YEAR ELECTROLUX SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY SOME STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE If You Need Service Keep your receipt delivery slip or some other appropriate payment record to establish the warranty period should service be required If service is performed it is in your best interest to obtain and keep all receipts Service under this warranty must be obtained by contacting Electrolux at the addresses or phone numbers below This warranty only applies in the USA and Canada In the USA your appliance is warranted by Electrolux Major Appliances North America a division of Electrolux Home Products Inc In Canada your appliance is warranted by Electrolux Canada Corp Electrolux
18. a 2S E Toe Grille gt IMPORTANT Features not included with your refrigerator can be purchased at www frigidaire com or by calling 1 800 944 9044 Required Tools You will need the following tools Tools Necessary A NY Phillips Head or 2 Square Drive Head Components Provided Top Hinge Top Hinge Cover Front Cover Rear Screw Screw This Use amp Care Guide provides general installation and operating instructions for your model We recommend using a service or kitchen contracting professional to install your refrigerator Use the refrigerator only as instructed in this Use amp Care Guide Before starting the refrigerator follow these important first steps Location e Choose a place that is near a grounded non GFCI electrical outlet Do Not use an extension cord or an adapter plug e If possible place the refrigerator out of direct sunlight and away from the range dishwasher or other heat sources e The refrigerator must be installed on a floor that is level and strong enough to support a fully loaded refrigerator e Consider water supply availability for models equipped with an automatic ice maker Socket Wrench Set INSTALLATION 3 8 Fixed N Wrench Adjustable Installation A CAUTION Do Not install the refrigerator where the temperature will drop below 55 F 13 C or rise above 110 F 43 C The compressor will not be able to maintain proper tem
19. atmosphere If you are throwing away your old refrigerator make sure the refrigerant is removed for proper disposal by a qualified technician If you intentionally release refrigerant you may be subject to fines and imprisonment under provisions of environmental legislation Electrical information e The refrigerator must be plugged into its own dedicated 115 Volt 60 Hz 15 Amp AC only electrical outlet The power cord of the appliance is equipped with a three prong grounding plug for your protection against electrical shock hazards It must be plugged directly into a properly grounded three prong receptacle The receptacle must be installed in accordance with local codes and ordinances Consult a qualified electrician Avoid connecting refrigerator to a Ground Fault Interrupter GFI circuit Do not use an extension cord or adapter plug e If the power cord is damaged it should be replaced by an authorized service technician to prevent any risk e Never unplug the refrigerator by pulling on the power cord Always grip the plug firmly and pull straight out from the receptacle to prevent damaging the power cord e Unplug the refrigerator before cleaning and before replacing a light bulb to avoid electrical shock e Performance may be affected if the voltage varies by 10 or more Operating the refrigerator with insufficient power can damage the compressor Such damage is not covered under your warranty e Do n
20. e compressor may have a high pitched hum or pulsating sound H Water valve Makes a buzzing sound each time it opens to fill the ice maker I Drain pan not removable You may hear water dripping into the drain pan during the defrost cycle J Condenser May create minimal sounds from forced air M Motorized damper May produce a light humming during operation 27 CHANGING THE FILTER Locating the Filters Your refrigerator is equipped with water filtering system The water filter system filters all dispensed drinking water as well as the water used to produce ice Water Filter The water filter is located at the top right side of the fresh food compartment Replacing the Water Filter In general you should change the water filter every six months to ensure the highest possible water quality The Water Filter Status light on the user interface prompts you to replace the filter after a standard amount of water 200 gallons 757 liters for PureSource Ultra has flowed through the system The water filter status light on this model is not performance tested or certified by NSF If your refrigerator has not been used for a period of time during moving for example change the filter before reinstalling the refrigerator Filter ee Ordering Replacement Filters To order your replacement filters please visit our online store at www frigidaire com store by calling tol
21. e distance from the ice maker inlet valve at the back of the refrigerator to your cold water pipe Then add approximately 7 feet 2 1 meters so the refrigerator can be moved out for cleaning as shown e A shutoff valve to connect the water supply line to your household water system DO NOT use a self piercing type shutoff valve e Do not reuse compression fitting or use thread seal tape e A compression nut and ferrule sleeve for connecting a copper water supply line to the ice maker inlet valve amp NOTE Check with your local building authority for recommendations on water lines and associated materials prior to installing your new refrigerator Depending on your local state building codes Frigidaire recommends for homes with existing valves its Smart Choice water line kit 5305513409 with a 6 ft Stainless Steel Water Line and for homes without an existing valve Frigidaire recommends its Smart Choice water line kit 5305510264 with a 20 ft Copper Water Line with self tapping saddle valve Please refer to www frigidaire com store for more information 15 CONNECTING THE WATER SUPPLY To Connect Water Supply Line To Ice Maker Inlet Valve 1 Disconnect refrigerator from electric power source 2 Place end of water supply line into sink or bucket Turn ON water supply and flush supply line until water is clear Turn OFF water supply at shutoff valve 3 Remove plastic cap from water valve inlet and
22. e fruits and vegetables in crisper drawers where trapped moisture helps preserve food quality for longer time periods e Wash items and remove excess water e Wrap any items that have strong odors or high moisture content Meat e Wrap raw meat and poultry separately and securely to prevent leaks and contamination of other foods or surfaces e Use the deli drawer to store meat poultry for short term storage Any meat to be kept longer than two days should be frozen Frozen food storage e Keep the freezer compartment at 0 F or lower e A freezer operates most efficiently when it is at least full Packaging foods for freezing e To minimize food dehydration and quality deterioration use aluminum foil freezer wrap freezer bags or airtight containers Force as much air out of the packages as possible and seal them tightly Trapped air can cause food to dry out change color and develop an off flavor freezer burn e Wrap fresh meats and poultry with suitable freezer wrap prior to freezing e Do not refreeze meat that has completely thawed Loading the freezer e Prior to grocery shopping activate quick freeze so that on your return you can ensure your newly purchased food designated for the freezer will be preserved as quickly as possible e Activating quick freeze also will help your freezer more efficiently maintain the selected temperature after placing new purchases with pre existing f
23. er cord Light Sockets Located Behind Glass Shelves a a A Refigerator Light Cover Refrigerator Light Lens Removal Light Socket Located in Upper Freezer Section see i Light Cover j Freezer Light Ordering Replacement LED Lights Order new LEDs by calling 877 808 4195 online at www frigidaire com store or through the NOTE dealer where you bought the refrigerator Here is the product number to request when ordering LED Light P 242196201 LED lights are in series so if one is bad or a rars sia unplugged several lights may not light up ee eee ae bulb LED Light Board Removal 33 BEFORE YOU CALL 1 800 944 9044 United States 1 800 265 8352 Canada Visit our web site at www frigidaire com CONCERN POTENTIAL CAUSE COMMON SOLUTION Ice maker is not making any ice e Ice maker power switch is Off e Ice maker has small cube caught in mechanism e Saddle valve on cold water pipe is clogged or restricted by foreign material e Ice maker is producing less ice than you expect Ice maker is not making enough ice e Check to see if water dispenser is dispensing slower than normal e Freezer control is set too warm freezer ice maker Ice maker will e Ice maker wire signal arm not stop making is being held down by ice some item in the freezer Ice cubes e Ice cubes are not being are freezing used frequently enough toge
24. es for the set screws are facing down 6 While holding handle firmly against door loosely tighten far right Allen set screw B with supplied Allen wrench until there is no gap between handle and door 7 Still holding the handle firmly to the door firmly tighten far left Allen set screw B with supplied L NOTE Allen wrench 8 Return to the far right Allen set All set screws should be tightened so the screw is below screw B and firmly tighten the surface of the handle The handles should be drawn with supplied Allen wrench tight to freezer and refrigerator doors with no gaps Opening the opposite door while tightening the Allen screw makes installation easier The door handle may loosen over time or if it was installed improperly If this happens tighten the set screws on the handles A CAUTION Wear gloves and safety goggles Use extreme CAUTION when installing these handles 12 INSTALLING DOOR HANDLES Door Handle Mounting Refrigerator Handles Mounting Instructions for Frigidaire Professional 1 Remove handles from carton and any other protective packaging 2 Position fresh food handle end over upper and lower pre installed shoulder bolts A that are fastened into door ensuring the holes for the set screws are facing towards the opposite door 3 While holding handle firmly against door fasten upper and lower Allen set screws B with supplied Allen wrench 4 Repeat steps
25. glass shelves that are designed to catch and hold accidental spills You can easily adjust shelf positions in the fresh food compartments to suit your needs The shelves have mounting brackets that attach to slotted supports at the rear of each compartment To change the position of a shelf 1 Remove all food from the shelf 2 Lift the front edge up and pull the shelf out 3 Replace by inserting the mounting bracket hooks into the desired support slots 4 Lower the shelf and lock into position Shelf features SpillSafe Shelf 22 Slide Under Shelf Drawers Your refrigerator includes a variety of storage drawers These drawers are located in fixed positions at the bottom of the fresh food compartment Crispers Crisper drawers are designed for storing fruits vegetables and other fresh produce SS Opening Crisper Drawer Crisper humidity control Crisper drawers include a sliding control for adjusting the humidity inside the crisper Leafy vegetables keep best when stored with the Humidity Control set on Higher Humidity Fresh fruits keep best when stored with the Humidity Control set on Lower Humidity Vegetables Fruits hi ss oe Re eee ES lo Humidity Control Higher Lower Humidity Humidity Adjusting Crisper Humidity To remove the Crisper Drawer for cleaning 1 Pull the drawer out until it stops 2 L
26. gnal arm To gain access 3 Empty and carefully clean the ice bin to the ice maker pull the freezer drawer out Lift with mild detergent Do not use harsh or the wire signal arm to turn the ice maker OFF abrasive cleaners Rinse with clean water and lower the wire signal arm to turn it ON 4 Allow the ice bin to dry completely before replacing in the freezer 5 Replace the ice bin Turn the ice maker on Remove and empty the ice bin if e An extended power failure one hour or longer causes ice cubes in the ice bin to melt and freeze together Remove the ice bin and shake to loosen the cubes or clean as explained above Ay caution NEVER use an ice pick or similar sharp instrument to break up the ice This could damage the ice bin and dispenser mechanism Ice maker tips e If your refrigerator is not connected to a To loosen stuck ice use warm water water supply or the water supply is turned Before replacing the ice bin make sure it is off turn off the ice maker by lifting wire completely dry Signal arm 21 STORAGE FEATURES A CAUTION To avoid personal injury or property damage handle tempered glass shelves carefully Shelves may break suddenly if nicked scratched or exposed to sudden temperature change Allow the glass shelves to stabilize to room temperature before cleaning Do not wash in dishwasher i NOTE Features may vary according to model Your refrigerator includes SpillSafe
27. hange the water filter every six months to ensure the highest possible water quality Water Filter Status on the user interface prompts you to replace the filter after a standard amount of water 125 gallons 473 liters for PureSource Ultra II has flowed through the system If your refrigerator has not been used for a period of time during moving for example change the filter before reinstalling the refrigerator a SE a Filter Cartridge Ordering Replacement Filters To order your replacement filters please visit our online store at www frigidaire com store by calling toll free at 1 800 599 7569 or by visiting the dealer where you purchased your refrigerator Frigidaire recommends that you order extra filters when you first install your refrigerator and that you replace your filters at least once every six months Here is the product number to request when ordering PureSource Ultra II Water Filter Part EPTWFUO1 NOTE When ordering your replacement filter please reorder the same filter type that is currently in your refrigerator CHANGING THE FILTER More about your Advanced Water Filter The PureSource Ultra II ice and water filter system is tested and certified to NSF ANSI Standards 43 53 and 401 for the reduction of claims specified on the performance data sheet Do not use with water that is microbiologically
28. ift the front slightly and remove the drawer KA Ny Removing Crisper Drawer Deli drawer STORAGE FEATURES Doors Storage bins The doors to your fresh food compartment use a system of modular storage bins All of these bins are removable for easy cleaning Some of them have fixed positions while others can be adjusted to your needs Door bins are ideal for storing jars bottles cans and large drink containers They also enable quick selection of frequently used items To change the position of an adjustable door bin 1 Remove all food from the door bin 2 Grip the bin firmly with both hands and lift it upward 3 Remove the bin 4 Place the bin just above desired position 5 Lower the bin onto supports until locked in place Adjustable Door Bin 6 Place bin liner into bin 23 STORAGE FEATURES Accessories varies by model To reinstall upper basket position basket onto the retainer clips making sure the front of Dairy compartment the basket rests in the retainer clips on the Use the dairy compartment at the top of the fresh food compartment door for short term storage of cheese spreads or butter The dairy compartment is designed to be Dairy Compartment warmer than the open area and includes a lift up cover and a dairy divider select models stabilizer bar am
29. ing Water collects in e Washed vegetables and fruit e Dry items before putting them in the drawer bottom of drawer drain while in the drawer Water collecting in bottom of drawer is normal WATER MOISTURE FROST OUTSIDE REFRIGERATOR Moisture collects e Weather is humid e This is normal in humid weather Press on outside of Energy Saver icon to reduce exterior refrigerator or moisture on the cabinet between the doors between doors When humidity is lower the moisture should disappear and the Energy Saver icon can be pressed again to turn it off e Door is slightly open See CONCERN column OPENING CLOSING causing cold air from OF DOORS DRAWERS inside refrigerator to meet warm air from outside MAJOR APPLIANCE WARRANTY Your appliance is covered by a one year limited warranty For one year from your original date of purchase Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be defective in materials or workmanship when such appliance is installed used and maintained in accordance with the provided instructions Exclusions This warranty does not cover the following 1 Products with original serial numbers that have been removed altered or cannot be readily determined 2 Product that has been transferred from its original owner to another party or removed outside the USA or Canada Rust on the interior or exterior of the unit Products purchased as is are not co
30. l free at 877 808 4195 or by visiting the dealer where you purchased your refrigerator Frigidaire recommends that you order extra filters when you first install your refrigerator and that you replace your filters at least once every six months Here is the product number to request when ordering PureSource Ultra Water Filter Part ULTRAWF 28 FRIGIDAIRE amp FRIGIDAIRE GALLERY More about your Advanced Water Filter The PureSource Ultra ice and water filter system is tested and certified to NSF ANSI Standards 42 and 53 for the reduction of claims specified on the performance data sheet Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts Test amp certification results e Rated Capacity 200 gallons 757 liters for PureSource Ultra ice and water filter e Rated service flow 50 gallons per minute e Operating Temp Min 33 F Max 100 F e Maximum Rated Pressure 100 pounds per square inch e Recommended Minimum Operating Pressure 30 pounds per square inch To replace your PureSource Ultra water filter It is not necessary to turn the water supply off to change the filter Be ready to wipe up any small amounts of water released during the filter replacement 1 Turn Off the ice maker by raising the
31. len set screw B with supplied Allen wrench 8 Return to the right Allen set screw B and firmly tighten with supplied Allen wrench A CAUTION INSTALLING DOOR HANDLES Mounting Refrigerator Handles All set screws should be tightened so the screw is below the surface of the handle The handles should be drawn tight to freezer and refrigerator doors with no gaps Opening the opposite door while tightening the Allen screw makes installation easier The door handle may loosen over time or if it was installed improperly If this happens tighten the set screws on the handles Wear gloves and safety goggles Use extreme CAUTION when installing these handles 1i INSTALLING DOOR HANDLES Door Handle Mounting Mounting Refrigerator Handles Instructions for Frigidaire Gallery 1 Remove handles from carton and any other protective packaging 2 Position fresh food handle end over upper and lower pre installed shoulder bolts A that are fastened into door ensuring the holes for the set screws are facing towards the opposite door 3 While holding handle firmly against door fasten upper and lower Allen set screws B with supplied Allen wrench 4 Repeat steps 2 and 3 to install opposite handle Ensure the holes for the set screws are facing towards the first door 5 Position freezer handle end over left and right pre installed handle mounts that are fastened to the door ensuring the hol
32. low 24 hours for temperature to stabilize e Close both doors gently Ensure floor is level and solid and can adequately support the refrigerator Contact a carpenter to correct a sagging or sloping floor Ensure floor is level and solid and can adequately support the refrigerator Contact a carpenter to correct a sagging or Sloping floor Remove top layer of items in drawer Ensure drawer is properly installed on track Clean drawer rollers and track See Care amp Cleaning BEFORE YOU CALL CONCERN POTENTIAL CAUSE COMMON SOLUTION Compressor e Freezer control is set to e Set freezer control does not run OF or 0 e Refrigerator is in defrost e This is normal for a fully automatic defrost cycle refrigerator The defrost cycle occurs periodically lasting about 30 minutes e Plug at electrical outlet is Ensure plug is tightly pushed into outlet disconnected e House fuse blown or e Check replace fuse with a 15 amp time delay tripped circuit breaker fuse Reset circuit breaker e Power outage e Check house lights Call local electric company Refrigerator e Room or outside weather e It s normal for the refrigerator to work longer runs too much is hot under these conditions or too long e Doors are opened too e Warm air entering the refrigerator causes it frequently or too long to run more Open doors less often e Fresh Food freezer door e Ensure refrigerator is level Keep food and ma
33. n Wear gloves and safety goggles Use extreme CAUTION when installing these handles 14 CONNECTING THE WATER SUPPLY A WARNING To avoid electric shock which can cause death or severe personal injury disconnect the refrigerator from electrical power before connecting a water supply line to the refrigerator A CAUTION To Avoid Property Damage e Copper or Stainless Steel braided tubing is recommended for the water supply line Water supply tubing made of 1 4 inch plastic is not recommended to be used Plastic tubing greatly increases the potential for water leaks and the manufacturer will not be responsible for any damage if plastic tubing is used for the supply line e DO NOT install water supply tubing in areas where temperatures fall below freezing e Chemicals from a malfunctioning softener can damage the ice maker If the ice maker is connected to soft water ensure that the softener is maintained and working properly IMPORTANT Ensure that your water supply line connections comply with all local plumbing codes Before Installing The Water Supply Line You Will Need e Basic Tools adjustable wrench flat blade screwdriver and Phillips screwdriver e Access to a household cold water line with water pressure between 30 and 100 psi e A water supply line made of inch 6 mm OD copper or stainless steel tubing To determine the length of tubing needed measure th
34. nd tracks e Do not wash any removable items bins drawers etc in dishwasher Soap and water e Allow glass to warm to room temperature before Glass cleaner immersing in warm water Mild liquid sprays Soap and water e Remove toe grille See Installation Instructions Mild liquid sprays e Vacuum both sides and wipe with sudsy cloth or Vacuum sponge Rinse and dry Soap and water e Do not use commercial household cleaners containing Non abrasive glass ammonia bleach or alcohol to clean handles cleaner e Use a soft cloth to clean smooth handles e Do not use a dry cloth to clean smooth doors Soap and water e Never use CHLORIDE or cleaners with bleach to clean Stainless steel stainless steel cleaners e Clean stainless steel front and handles with non abrasive soapy water and a dishcloth Rinse with clean water and a soft cloth e Use a non abrasive stainless steel cleaner These cleaners can be purchased at most home improvement or major department stores Always follow manufacturer s instruction Do not use household cleaners containing ammonia or bleach e NOTE Always clean wipe and dry with grain to prevent scratching e Wash the rest of the cabinet with warm water and mild liquid detergent Rinse well and wipe dry with a clean soft cloth Vacation and moving tips Occasion Short Vacations Long Vacations Moving 32 Ti S Ey refrigerator operating during vacations of three weeks or less Use all perishable
35. ot plug the unit into an electrical outlet controlled by a wall switch or pull cord to prevent the refrigerator from being turned off accidentally IMPORTANT Pressing and holding the On Off button for three seconds located on the left side of the temperature control panel will disable your refrigerator s cooling system but does not disconnect the power to the light bulb and other electrical components To turn off power to your refrigerator you must unplug the power cord from the electrical outlet Grounding type wall receptacle Power cord with 3 prong grounded plug Oy caution To avoid personal injury or property damage handle tempered glass shelves carefully Shelves may break suddenly if nicked scratched or exposed to sudden temperature change Do not under any circumstances cut remove or bypass the grounding prong FEATURES AT A GLANCE Features may vary according to model LED Cluster Light Flipper Guide LED Cluster Light Water Filter Dairy z Compartment sister GED 11 SpillSafe Shelf Heteh ily ae ae LED Cluster Light i m 0 Slide Under Shelf LED i h m o o 1 Flipper Mullion Cluster Light LED Cluster Light Crisper Crisper Drawer Drawer Deli Drawer Door Bin Mine Ice Maker Freezer Baskets leB S000 0000 D000 9900 0000
36. ower pre installed shoulder bolts A that are fastened into door ensuring the holes for the set screws are facing towards the opposite door 3 While holding handle firmly against door fasten further most upper and further most lower Allen set screws B with supplied Allen wrench 4 Repeat steps 2 and 3 to install opposite handle Ensure the holes for the set screws are facing towards the first door 5 Firmly tighten the inside Allen set screws 6 Position freezer handle end over left and right pre installed handle mounts that are fastened to the door ensuring the holes for the set screws are facing down 7 While holding handle firmly against door loosely tighten far right Allen set screw B with supplied Allen wrench until there is no gap between handle and door 8 Still holding the handle firmly to the door firmly tighten far left Allen set screw B with supplied Allen wrench 9 Return to the far right Allen set screw B and firmly tighten with supplied Allen wrench 10 Firmly tighten the inside Allen set Screws b NOTE All set screws should be tightened so the screw is below the surface of the handle The handles should be drawn tight to freezer and refrigerator doors with no gaps Opening the opposite door while tightening the Allen screw makes installation easier The door handle may loosen over time or if it was installed improperly If this happens tighten the set screws on the handles fy cautio
37. p NOTE If basket is not resting on stabilizer bar retainer clips the drawer will not close properly To Remove Lower Basket Freezer Features varies by model Basket Retaine Removing Lower Basket 1 Remove all items from basket 2 Remove the basket by tilting it forward and lifting it from the retainer clips To reinstall lower basket insert basket into retainer clips Retainer Clips Two Freezer Baskets To Remove Upper Basket 1 Remove all items from og basket ge Cia 2 Remove A ic basket by ai sul R pulling baskets out to their full extension and lift out Removing Upper Basket 24 STORAGE FEATURES Dividers Removal Lift up on the front of the middle divider and pull out Basket Divider Retainers K a K CO wae Bar AAA we IW AN AN AN N Y W M A Middle Basket Divider Lift up on the rear of the lower divider and pull out Lower Basket Lower Basket Divider amp Spill Guard Tray Spill Guard Tray should be hand washed in warm water 25 STORING FOOD AND SAVING ENERGY Ideas for storing foods Fresh food storage e Keep the fresh food compartment between 34 F and 40 F with an optimum temperature of 37 F e Avoid overcrowding the refrigerator shelves which reduces air circulation and causes uneven cooling Fruits and vegetables e Stor
38. per Mullion j n T Thickness of a Coin a Adjusting Flipper Mullion Height 3 Retighten screw DOOR REMOVAL INSTRUCTIONS Getting through narrow spaces To remove the refrigerator doors If your refrigerator will not fit through an 1 Trace lightly around the door s top hinges entrance area you can remove the doors with a pencil This makes reinstallation Check first by measuring the entrance Easier To prepare for removing the doors 1 Make sure the electrical power cord is unplugged from the wall outlet 2 Open the freezer drawer and remove the toe grille see Installation section 3 Remove any food from the door shelves and close the doors To remove the top hinge covers 1 Remove the two screws from each cover over the top door hinges 2 Lift inside edge of hinge cover and tilt back Front ean 2 Disconnect the harness by grasping both Cover Screw Cover sides of the connector firmly depress the Top Hinge U Screw latch and pull apart Remove the two Cover screws from the top hinge Lift the door off of the bottom hinge and set it aside Hinge Screws Cables Hinge With Door Rear Sy S Cover over Screw Screw 5 Two Wire Cables Leave Hinge With Door DO NOT remove the ground screw from hinge DOOR REMOVAL INSTRUCTIONS NOTE You will be pulling approximately three feet of water tube from the back of the refrigerator
39. peratures inside the refrigerator Do Not block the toe grille on the lower front of your refrigerator Sufficient air circulation is essential for the proper operation of your refrigerator e Allow the following clearances for ease of installation proper air circulation and plumbing and electrical connections Sides amp Top 3 8 inch 9 5 mm Back 1 inch 25 4 mm amp NOTE If your refrigerator is placed with the door hinge side against a wall you may have to allow additional space so the door can be opened wider Door opening Your refrigerator should be positioned to allow easy access to a counter when removing food For best use of refrigerator drawers and freezer baskets the refrigerator should be in a position where both can be fully opened INSTALLATION Leveling Freezer Drawer if necessary 1 Check gasket seal around top bottom and sides of freezer drawer 2 If gasket is not sealed open drawer and Slightly loosen four drawer screws two on each side to allow drawer to rotate 3 Close drawer and recheck the seal on the gasket A Open the drawer grabbing by the sides in the center B Be careful not to rotate the drawer Remove Hex Head Drawer Screw Remove Hex Head Drawer Screw N Do Not Remove _ Aaa Other Screws l er pa o Remove Hex Head Drawer Screw 4 Tighten four drawer screws 5 Recheck gasket seal Grab Drawer Push M At Center Again
40. power cord from the wall outlet Setting cooling temperatures NOW NOW Press the A or v indicator to adjust the temperature to the desired setting The temperature display will begin to blink with the first touch The display will time out after 10 seconds and return to the basic display Alarms Door Ajar If the door has been left open for an extended period of time an alarm will sound and the door ajar indicator will light up The alarm is turned off by closing the door Press the alert reset key to reset any system alarms High Temp In the event of a high temperature condition the temperature display will blink and display HI After 20 minutes the alarm will sound and the high temp indicator will be red Pressing the alert reset key will acknowledge the high temp alarm The highest temperature reached will be displayed for 5 seconds and the refrigerator will resume normal operation Power Fail In the event of a power failure the power fail alert will be displayed and the temperature display will blink until the alert reset icon is pressed acknowledging the alarm Other modes may be turned off until the alarm is acknowledged The power fail alert is turned off and the refrigerator will resume normal operation The high temp alarm may also be illuminated until a safe operating range temperature has been reached 17 FRIGIDAIRE amp CONTROLS FRIGIDAIRE GALLERY Sabbath Mode The Sabbath Mode is a featu
41. r five seconds The display shows Sb while in Sabbath mode In the Sabbath Mode the High Temp alarm some models is active for health reasons If a high temperature alarm is activated during this time for example due to a door left ajar the alarm will sound intermittently for about 10 minutes The alarm will then silence on its own and a red high temperature icon will display The high temp icon will continue to display even if the door is closed until the Sabbath mode is exited and the icon reset The refrigerator will function normally once the door is closed without any violation of the Sabbath Holidays For further assistance guidelines for proper usage and a complete list of models with the Sabbath feature please visit the web at http www Sstar k org i NOTE While in Sabbath Mode neither the lights nor the control panel will work until Sabbath Mode is deactivated Refrigerator stays in Sabbath Mode after power failure recovery It must be deactivated with the buttons on the control panel 20 AUTOMATIC ICE MAKER sELEcT MopDELs Ice maker operation amp care e The following sounds are normal when the After the refrigerator is installed properly the ice maker Is Operaning ice maker can produce ice within 24 hours It Motor running can completely fill an ice bin in about three Ice dropping into ice bin days Water valve opening or closing When using the ice maker for the first time and
42. ranty e Before moving your refrigerator raise the anti tip brackets so the rollers will work correctly This will prevent the floor from being damaged Gy caution e Pull the refrigerator straight out to move it Shifting it from side to side may damage flooring Be careful not to move the refrigerator beyond the plumbing connections e Damp objects stick to cold metal surfaces Do not touch refrigerated surfaces with wet or damp hands IMPORTANT If you store or move your refrigerator in freezing temperatures be sure to completely drain the water supply system Failure to do so could result in water leaks when the refrigerator is put back into service Contact a service representative to perform this operation Refer to the guide on the next page for details on caring and cleaning specific areas of your refrigerator 31 CARE amp CLEANING Care and cleaning tips Cleaning Agents Tips and Precautions Part Interior amp Door Liners Door Gaskets Drawers amp Bins Glass Shelves Toe Grille Exterior amp Handles Exterior amp Handles Stainless Steel Models Only Soap and water e Use two tablespoons of baking soda in one quart of Baking soda and warm water water e Be sure to wring excess water out of sponge or cloth before cleaning around controls light bulb or any electrical part Soap and water e Wipe gaskets with a clean soft cloth Soap and water e Use a soft cloth to clean drawer runners a
43. re that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community Sabbath Mode is turned ON and OFF by simultaneously pressing and holding both the freezer v and refrigerator a indicators for five seconds The display shows Sb while in Sabbath mode In the Sabbath Mode the High Temp alarm some models is active for health reasons If a high temperature alarm is activated during this time for example due to a door left ajar the alarm will sound intermittently for about 10 minutes The alarm will then silence on its own and a red high temperature icon will display The high temp icon will continue to display even if the door is closed until the Sabbath mode is exited and the icon reset The refrigerator will function normally once the door is closed without any violation of the Sabbath Holidays For further assistance guidelines for proper usage and a complete list of models with the Sabbath feature please visit the web at http www Star k org NOTE While in Sabbath Mode neither the lights nor the control panel will work until Sabbath Mode is deactivated Refrigerator stays in Sabbath Mode after power failure recovery It must be deactivated with the buttons on the control panel 18 FRIGIDAIRE PROFESSIONAL CONTROLS User Interface In Door Controls options may vary POW
44. rms If the door has been left open for an extended period of time an alarm will sound and the door ajar indicator will light up The alarm is turned off by closing the door Press the mute alarm key to reset any system alarms Door Ajar High Temp In the event of a high temperature condition the temperature display will blink and display HI After 20 minutes the alarm will sound and the high temp indicator will be red Pressing the mute alarm key will acknowledge the high temp alarm The highest temperature reached will be displayed for 5 seconds and the refrigerator will resume normal operation In the event of a power failure the power fail alert will be displayed and the temperature display will blink until the mute alarm icon is pressed acknowledging the alarm Other modes may be turned off until the alarm is acknowledged The power fail alert is turned off and the refrigera tor will resume normal operation The high temp alarm may also be illuminated until a safe operat ing range temperature has been reached Power Fail t9 FRIGIDAIRE CONTROLS PROFESSIONAL Sabbath Mode The Sabbath Mode is a feature that disables portions of the refrigerator and its controls in accordance with observance of the weekly Sabbath and religious holidays within the Orthodox Jewish community Sabbath Mode is turned ON and OFF by simultaneously pressing and holding both the freezer and refrigerator indicators fo
45. rozen foods 26 e Avoid adding too much warm food to the freezer at one time This overloads the freezer slows the rate of freezing and can raise the temperature of frozen foods e Leave a space between packages so cold air can circulate freely allowing food to freeze as quickly as possible Ideas for saving energy Installation e Locate the refrigerator in the coolest part of the room out of direct sunlight and away from heating ducts or registers e Do not place the refrigerator next to heat producing appliances such as a range oven or dishwasher If this is not possible a section of cabinetry or an added layer of insulation between the two appliances will help the refrigerator operate more efficiently e Level the refrigerator so that the doors close tightly Temperature settings e Refer to the Controls section for procedures on temperature settings Food storage e Avoid overcrowding the refrigerator or blocking cold air vents Doing so causes the refrigerator to run longer and use more energy e Cover foods and wipe containers dry before placing them in the refrigerator This cuts down on moisture build up inside the unit e Organize the refrigerator to reduce door openings Remove as many items as needed at one time and close the door as soon as possible e Do not place a hot container directly on a cold shelf Remember such an extreme temperature change may damage the glass NORMAL O
46. st 7 From Both Freezer Sides Then Drawer Pull Drawer j Out Level Refrigerator amp Adjust Doors if necessary Guidelines for final positioning of your refrigerator e All four corners of the cabinet must rest firmly on the floor e The sides should tilt 1 4 inch 6 mm from front to back to ensure that doors close and seal properly e Doors should align with each other and be level Most of these conditions can be met by raising or lowering the adjustable front rollers To level the cabinet using the front rollers select models 1 Slightly open freezer drawer Lift the toe grille and gently pull forward see illustration 2 You can raise or lower each door Use a 3 inch socket wrench to turn the adjustment screws one per side Toe Grille Must Fit in Slot on a Anti tip Bracket Y Screw Washer amp ew To raise turn adjustment screw clockwise To lower turn adjustment screw counterclockwise 3 Ensure both doors are bind free with their seals touching the cabinet on all four sides and that cabinet is stable 4 After unit is leveled lower anti tip leg until it contacts the floor 5 Install the toe grille by fitting into place To adjust the door stop Door stop is adjustable between 85 to 145 degrees NOTE View shown is looking up at the bottom of the refrigerator door Adjustable Door Stop
47. tential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death A DANGER DANGER indicates an imminently hazardous situation which if not avoided will result in death or serious injury A WARNING WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury Oy caution CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury gt IMPORTANT IMPORTANT indicates installation operation or maintenance information which is important but not hazard related 2 WI Installation Checklist Doors Q Handles are secure and tight 0 Door seals completely to cabinet on all sides Q Freezer drawer is level across the top Leveling Q Refrigerator is level side to side and tilted inch 6 mm front to back Q Toe grille is properly attached to refrigerator Q Cabinet is setting solid on all corners Electrical Power LJ House power turned on Q Refrigerator plugged in Ice Maker select models LJ House water supply connected to refrigerator Q No water leaks present at all connections recheck in 24 hours LY Ice maker is turned ON Final Checks Q Shipping material removed Q Fresh food and freezer temperatures set QO Crisper humidity controls set Q Registration card sent in Child Safety Destroy or recycle the carton plastic bags and
48. ther e Ice cubes are hollow partially frozen cubes with water inside e Freezer control is set too warm OPENING CLOSING OF DOORS DRAWERS Door was closed too hard causing other door to open slightly Refrigerator is not level It rocks on the floor when moved slightly Refrigerator is touching a wall or cabinet Door s will not close Drawers are difficult to move Food is touching shelf on top of drawer Track that drawers slide on is dirty 34 e Turn power switch to On I position e Remove small cube from ice maker The ice and water filter cartridge may be clogged Replace filter cartridge e Turn off household water line valve Remove valve Ensure that valve is not a self piercing saddle valve Clean valve Replace valve if necessary e The ice maker produces approximately four pounds of ice every 24 hours depending on usage conditions e If itis replace the ice and water filter cartridge e Set freezer control to colder setting to improve performance of the ice maker freezer ice maker Allow 24 hours for temperature to stabilize e Move item and release wire signal arm Remove any ice cubes that are frozen together over the wire signal arm e Remove ice container and discard ice from container Ice maker will produce fresh supply e The ice and water filter cartridge may be clogged Replace filter cartridge e Set freezer control to colder setting Al
49. unsafe or of unknown quality without adequate disinfection before or after the system Systems certified for cyst reduction may be used on disinfected waters that may contain filterable cysts Test amp certification results e Rated Capacity 125 gallons 473 liters for PureSource Ultra II ice and water filter e Rated service flow 65 gallons per minute e Operating Temp Min 33 F Max 100 F e Maximum Rated Pressure 100 pounds per square inch e Recommended Minimum Operating Pressure 30 pounds per square inch To replace your PureSource Ultra II water filter It is not necessary to turn the water supply off to change the filter Be ready to wipe up any small amounts of water released during the filter replacement 1 Turn Off the ice maker power switch 2 Remove the old filter by rotating it counter clockwise to the left 90 degrees to release it 3 Slide the old filter cartridge straight out of the housing and discard it 4 Unpackage the new filter cartridge Slide it into the filter housing as far as it will go with the grip end horizontal 5 Push lightly inward on the filter while rotating it clockwise to the right The filter will then pull itself inward as it is rotated Rotate the filter 90 degrees until it stops and the grip end is vertical You may be able to feel a very light click as the filter locks into place 6 Press a drinking glass against the water dispenser while checking for any leaks at
50. vered by this warranty Food loss due to any refrigerator or freezer failures Products used in a commercial setting Service calls which do not involve malfunction or defects in materials or workmanship or for appliances not in ordinary household use or used other than in accordance with the provided instructions Service calls to correct the installation of your appliance or to instruct you how to use your appliance Expenses for making the appliance accessible for servicing such as removal of trim cupboards shelves etc which are not a part of the appliance when it is shipped from the factory Service calls to repair or replace appliance light bulbs air filters water filters other consumables or knobs handles or other cosmetic parts Surcharges including but not limited to any after hour weekend or holiday service calls tolls ferry trip charges or mileage expense for service calls to remote areas including the state of Alaska Damages to the finish of appliance or home incurred during installation including but not limited to floors cabinets walls etc Damages caused by services performed by unauthorized service companies use of parts other than genuine Electrolux parts or parts obtained from persons other than authorized service companies or external causes such as abuse misuse inadequate power supply accidents fires or acts of God DISCLAIMER OF IMPLIED WARRANTIES LIMITATION OF REMEDIES CU
51. y be slightly open contains from blocking door See CONCERN column OPENING CLOSING OF DOORS DRAWERS e Freezer control is set too Set Fresh Food control to warmer setting cold until refrigerator temperature is satisfactory Allow 24 hours for temperature to stabilize e Fresh Food freezer gasket e Clean or change gasket Leaks in door seal is dirty worn cracked or will cause refrigerator to run longer in order poorly fitted to maintain desired temperatures e Condenser is dirty e Clean condenser See Care amp Cleaning Compressor e Thermostat keeps the e This is normal Refrigerator goes on and off goes off and on refrigerator at a constant to keep temperature constant frequently temperature DIGITAL TEMPERATURE DISPLAY Digital e Electronic control e Call your Frigidaire service representative temperature system has detected a who can interpret any messages or number displays are performance problem codes flashing on the digital displays flashing WATER MOISTURE FROST INSIDE REFRIGERATOR Moisture collects e Weather is hot and e The rate of frost buildup and internal on inside of humid Sweating increases refrigerator e Door is slightly open e See CONCERN column OPENING CLOSING walls OF DOORS DRAWERS Water collects e Vegetables contain and e It is not unusual to have moisture on the on bottom side give off moisture bottom side of the cover of drawer cover e Move humidity control some models to lower sett
Download Pdf Manuals
Related Search