Fortec FSHD-4700 User's Manual
Contents
1. CONNECT VIDEO TOTV USING RCA CONNECTTO TVSET OR VIDEO PROJECTOR YPbPr OR COMPONENT INPUTS LNB IN CONNECT TO SA TELLITE ANTENNA LNB OUT CONNECT TOTHE OTHER RECEIVER Connecting to TV using HDMI support Satellite Dish 175V 250V 50Hz 60Hz LNBIN LNB OUT Adm mes CONNECT TO USB DEVICE CONNECTTO TVSET DV OUT INPUT JACK DSR 3 The pictureis only for reference please make the object as the standard INSTALLATION Connecting to TV using SCART support AUDIO VIDEO TV Satellite Dish LNB IN LNBOUT a C Po Pr Designed in USA i Manufactured Under the License of Fortec International Inc AUDIO e wisi ers JO soHe oHe ER OM e Pb r Connecting to Digital Amplifier Satellite Dish Y L gt la AUDIO aene E B E BIN LNB OUT OFF ON DIGITAL AUDIO CONVERTOROR AMPLIFIER DIGITAL AUDIO SPEAKER 3 The pictureis only for reference please make the object as the standard MENU INFORMATION Main Menu 3 Make sure that you have properly installed and connected the cables of the receiver If the receiver is the factory status or there is no program list when power on the Main Menu window will be displayed on the screen During the normal TV Radio mode press MENU key on the RCU to enter into the Main Menu window This menu consists of6 major main menus as follow Edit2. PIN Maturity Level 4 3 1 About CA Info In About CA Info sub menu you can know the basic information about this conditional access such as Card Status CAS System ID Interface Version Card Number Number of sessions Country Indicator and Maturity Level 4 3 2 Change PIN Changes PIN window is designed for changing the smart card s PIN which is required if you want change the maturity level settings In order to change the PIN you must know the current PIN also called the old PIN Input the new PIN and twice the PIN New PIN and Confirm PIN must be the same your want to set Move cursor to OK button and press OK key and then system will pop up a dialogue informing you the changing result Note thatthe PIN can only constructed with Arabic numerals 4 3 3 Change Signature PIN Do the same way asthe above Change PIN Note The signature PIN will be locked after the three erroneous attempts to enter the correct PIN If locked please call the dealer for help A Z 5 MENU INFORMATION 4 3 4 Maturity Level Input the PIN then Move cursor to Select Maturity levelyyou can select A Over18 X Erotic G General audience PG Parental Guidance move cursor to Change Maturity level button and press OK key and then system will pop up a dialogue informing you the changing result 4 3 5 Subscription Status Know the detail information of Subscription Status 4 3 6 Even Status Know the detail information of Event Status 4 3
3. Press OK keyor key to pop up the Input Password dialogue you can not enter into the menu unless the correct password is inputted The default password is 0000 2 Press PR PR keys to move the cursor up or down 3 Press EXIT keyor key to move the focus to the leftmenu 2 1 Antenna Connection Press Za keys to select between Motor Antenna and Fixed Antenna A gt MENU INFORMATION 2 2 Satellite List 1 Press PR PR keys to select the satellite up or down Press OK key to select and mark and you can press OK key again to cancel the selection and the mark 2 If there is no satellite the red colour and blue colour keys will be invalid 3 Press red colour key to pop up the Edit Satellite window Press PR PR keys to move cursor up or down Name User numeric keys to change the name of the satellite please refer to the Edit Channel Name Longitude Y ou can press 21 eys to switch between east longitude and west longitude After pressing OK key you can use numeric keys to edit the longitude press EXIT key or the PR PR keys to exit editing mode The range of the longitude is from 1to 180 degree If beyond this range system will inform you out of range when you press yellow colour key on the RCU After setting press yellow colour key to save and exit while press blue colour key to exit withoutsaving 4 Press green colour key to pop up the Add Satellite window Since t
4. Press PR PR keys to select one and press OK key to the Rename window Since the same operation as the abovethe Add Satellite window here we don t explain any more 3 9 Other 1 LNB Power Select between Of f and On 2 Channel Play Type Select among All Free Scramble 3 Channel Change Select between Black Screen and Freeze 4 Auto Standby Select between On and Off 4 Tools 1 Press OK key or key to pop up the Input Password dialogue you can not enter into the menu unless the correct password is inputted The default password is 0000 2 Press PR PR keys to move the cursor up or down 3 Press EXIT key or key to move the focus to the left menu 4 1 Information Press OK key to the Information window MENU INFORMATION 4 2 Factory Setting Press OK key to enter into the Factory Setting window Select Yes button and press OK key to return to the factory setting All searched channels and set information will be erased Select No button and press OK key to cancel this operation or press MENU or EXIT key to cancel and exit 4 3 Conditional Access Insert the smart card with the golden chip facing down Push the smart card into the CA slot Only a few CA Slot millimetres of the card should be visible outside the slot Select Conditional Access item and press OK key then you will enter into its sub menu which consists four items of About CA Info Change PIN Change Signature
5. 7 T oken Status Know the detail information of T okens Status 4 4 Upgrade by USB 1 Upgrade File Show the Upgrade File 2 Upgrade Mode Select between allcode maincode defaultdb userdb and Dump When users switch the upgrade mode Upgrade File will show the corresponding file according to the table below Upgrade Mode All code Filenamedas abs Main Code Filenamedas abs userdb Filenamedas abs the picture will be us ed a s both radio back and menu back Default db Filenamedas abs Select the upgrade mode and upgrade file then you can start upgrade by USB 3 Press OK key on start button to start receiving the data from USB device When the USB device is not connected this item is grey you can not edit it now 4 5 Network Local Setting DHCP Select between ON and OFF when it ON the IP Address Subnet Mask and Gateway item will turn gray you can not edit them Press number 0 9 the input the address 4 6 WiFi Manager Insert Wifi equipment first then search available Enter net signal input the password to connect with network MENU INFORMATION 4 7 Upgrade by Network 1 Protocol Select between HTTP and FTP 2 URL Type Select between number and string 3 URL press number key 0 9 to input 4 User Press number key 0 9 to input the user name 5 Press number key 0 9 the input the password 6 Press OK key on star button to begin updating Press green key to d
6. 9 on RCU Green key Press green key to enter the copy window press 21 key to select the place you want to copy to and press green key to begin copying Yellow key Press yellow key to add the delete symbol on your selected file press yellow key again the symbol will disappeared Press OK key on the file with delete symbol it will pop up a dialogue Are you sure to delete Select YESto delete and select NO to quit without delete the file and press EXIT key to quit withoutdelete the file Blue key Press blue key to enter the New Folder window you can press number 0 9 to edit In music list Press number key 1 to display the Sort window Press number key 2 to select the repeat mode The function of colour key is the same as Color key operation In video list Press number key 1todisplay the Sort window The function of colour is the same as Color key operation In record list Red key Press red key to enter the rename window you can rename the file by press number 0 9 on RCU Green key Press green key to lock the file you selected Yellow key Press yellow key to delete the file you selected 6 2 PVR Storage Information Show you the information in windows as besides Yellow key Press yellow key to format the disk Blue key Press blue key to pop up DVR Set windw 2 sy MENU INFORMATION 6 3 PVR Setting 1 Time shift Select between Off and On 2 Jump Select among 30sec 1 min 5mi 10min 30min 3 Time
7. Channel Installation System Setup Tools Game REC During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has mark Y ou can also use the numeric keys on the RCU to enter numeric value Use the PR PR key to move upwards and downwards from one line to another line and use 24 rt key to move from main menu to sub menu and move from left side to right side or versa Meantime you want to escape the menu system please press MENU or EXIT key on the RCU MENU INFORMATION Olf there is no program you can not exit from the Main Menu window by pressing MENU or EXIT key System will inform No channel and the following items turn grey Sub menu Turn grey when there is no program Edit Channel TV Channel List Radio Channel List Delete channels by satellite Antenna Connection Satellite List Installation Antenna Setup Single Satellite Search Multi Satellite Search TP List Language TV System System Setup Local Time Setting Timer setting Parental Lock OSD Setting Favorite Other Display Setting Tools Information Factory Setting Conditional Access Upgrade by USB Network Local Setting WiFi Manager Upgrade by Network Weather Forecast RSS Reader Game Othello Sudoku REC Media Player PVR Storage Information PVR Setting Remove USB device safely 1 Edit Channel 1 Press OK key or key to pop up the Input Password dialogue
8. SS SES O PERA AE 25 4 3 Conditional Access rR ARR RE AL IEE SEE ES SEES 25 AA Upgrade Dy USB Sri dept e pote ne Na AA A e 26 4 NetWork Local SELLING persas A PS 26 40 WIFI Manager 0 cups e ds Re ias 26 Ad Wodtage by NetWork ares see do a ls 27 4 8 Weather Forecast 27 o o de den Da et Ca ent ae ie ae Mie 27 RS 27 CREC ii Hernies RSR ERA eS peewee aiea a a a sean ae 27 6 1 Media Player ee 27 6 2 PYR Storage Information eE Oi 28 6 3 PVR Setting E SEE Se 29 6 4 Remove USB device safely 29 TOT KO AAA A RA 29 FUINO ae Rae ee nee aie ne er een ee mg net ecg em tig eared eet a ne meyeae eg aoa 29 EE E AA A O AO 29 Ee 30 7 4 Number oro 30 Fo TV Radio Aren a NOT MIRTA laa IE ON 30 KOUP DOWD E A rte ae 30 Fe a a ie gS FEA A AA A ESE O A A POR 30 PCAN PES eo eaen ge reste nate ered ote neo aat moat 30 TIPISE Ser NS anette res Se esreter gue ru esteeeta geome emer een seen Se 30 71OOK rro erre 30 FAI PO AAA E AEROS Si eee eS A AN AA ene eS 31 RS Pirehrnteecesexerreme rnp Hees R steno Re eta 31 7 13 FaV eee 31 PANT OEE A ARE RE E E ER 31 TROUBLE SHOOTING GENERAL INFORMATION A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite This user s guide covers the installation of the DSR and the necessary steps to implement various f
9. User s Guide FORTEC STAR Since 1994 FSHD 4700 Contents GENERALINFORMA TION Main 20 Rae G aa E a FOr youto alely irrita GIN E ER SR E E General Operation oso a NA QU A A A AO A O RA A O TO Rear Panel INSTALLATION MENU INFORMA TION M in M A ee eee eae eee eee ee eee oe cee 1 Edit Channel teen eee renee eee eters TeV ETATS LISE esse eee rene ee te eee aces ae See en E E 1 2 Radio Channel List ne 1 3 Delete channels by satellite eine pat sos dir emecioeds 2 Anstallatlio ternera pate dps eto nee en siete neers e o pi 2 1 Antenna Connection memo 22 Satellite Lig PSA RO E ON 2 3 Antenna SOLDE ENTIER MR RSS ER RE eRe Pee Sane ee 2 4 Single Satellite Search esse 2 5 Multi Satellite Search ropa A REA ER EE RE OP Li arica a Pr dios Nee enn aaa 2 SVSLOMN OGL mira Da ara 3l Language sumisi n niet 3 2TV System 3 3 Display Setting ssessseeeesseesseee 3A Local TIMESettiad seen Lich lu denses OCR A t 3 6 Parental Lock un ne ae 3 7 OSD Setting 3 8 Favorite 39 Other a ba 10 11 11 12 12 15 15 15 15 16 17 19 19 20 21 21 22 22 22 23 23 24 24 Contents As T OOI A nua R E een oi sue hobbies 24 A IMIOMMALIONM Ne Reese ones RSR ARTE ANA 24 4 2 Factory Setting PPT O O E
10. adjustthe dish The satellite dish is not pointing at the satellite Adjust the dish Signalistoo strong Connect a signal attenuator to the LNB input Bad picture blocking error Satellite dishis too small Change to a larger dish LNB noise factor toohigh Changeto an LNB with lower noise factor TheLNBis faulty Changethe LNB The picture is not showed on the screen when switching on The sy stemis connected by RF lea ds Check the UHF channel fixed in yo ur sys temand tune the UH F channel properly There is interference on your digital satellite channels an existing terrestrial channel or video signal The system is connected by RF leads andthe output channel of the receiver interferes with an existing terrestrial channels or Video signal Changethe receiver output channel to amore suitable channel or connect the system by SCART leads The RCUis not working Battery exhausted Change the batteries 3Note If you have tried all of the actions suggested above without RCU is incorrectly aimed Aim RCU at the receiver or check that nothing blocks the front panel solving the problem please contact your dealer or service provider 32 CO FORTEC STAR Since 1994
11. e Local Latitude Press 24 MH keys to switch between West and East or press ZA keys to switch between North and South Press OK key to enter into the editing mode Use numeric keys 0 9 to input the longitude or latitude press MENU key or EXIT key to exit The range of the longitude is from O to 180 while the range of the latitude is from 0 to 90 If the inputted value is not in this range system will pop up a dialogue Out of Range when you exit from this window You can press OK key to close this dialogue MENU INFORMATION 7 Motor Setting Press OK key to enter into the Motor setting window Satellite Transponder Press 24 keys to select satellite or transponder or press OK key to pop up the drop down list and select inthe list 2 4 Single Satellite Search 1 Satellite Press 21 keys to select the satellite in circle Or press OK key to pop up the drop down list then select the desired satellite in the list and press OK key to confirm 2 FT A Only Press lt 4 r eysto select between Yes and No 3 Scan Channel Press A keys to select among TV Radio TV Channel Radio 4 Network Search Select between No and Yes This item turns grey when Auto Scanis selected in the following Scan mode item 5 Scan Mode Press k ysto select between Auto Scan and Preset Scan Auto Scan is Blind scan while Preset Scan is to search the preset frequencies 6 Search Press OK keyto start searching 2 5 M
12. eatures This also explains special features available only in this DSR in detail which will allow you to make full use ofthese feature Information confirmed in this document is subject to change We reserves the right without notice to make change in product design or performances as progress in engineering or technology Main Feature s MPEG2 SD MPEG2 HD H 264 A VC SD H 264 A VCHD MP4 Embedded Conax SCPC and MCPC receivable from C Ku band satellite Automatic PAL NTSC conversion 4000 channels TVand Radio programmable 32 different favorite groups selection Multi language OSD Fully supportto 7 days Electronic Program Guide EPG Picture in Graphics PIG support True color On Screen Display Automatic network search for newly added transponders DiSEqC 1 2 fully support 13 18V 0 22K LNB control Various channel editing functions favorite moving locking renaming deleting and sorting Parental control for channels e Easy to use Menu System Software upgrades through RS232 port and Receiver to receiver Support USB upgrade 8 Timer Reservations automatically switch to a specific channel Subtitle support DVB EN300743 and EBU Teletext support DVB ETS300472 by VBI and OSD Automatic save for last channel Channel list can be sorted by alphabetic A Z Scramble Favorite Lock Sat Support FA T16 FA T32 FAT12 Only list JPEG BMP files 480i p 576i p 720p 1080i 1080p with HDCP copy protection Games 1 recording then st
13. ed from the mains 8 This equipment is a Class ll or double insulated electrical appliance It has been designed in such a way that it does not require a safety connection to electrical earth CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock Warning To reduce the risk of electric shock do not remove cover or back as there are no user serviceable parts inside Refer servicing to qualified personnel The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance Ad Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU To prevent possible harm to the environment or human health from uncontrolled waste disposal recycle it responsibly to promote the sustainable reuse of material resources To return your used device please use the return and collection systems or contact the retailer where the product was purchased They can take this product for environmental safe recycling GENERAL INFORMATION Unpacking Optional 3 Rem
14. elete the number or characters and press red key to switch the input mode 4 8 Weather Forecast Press green key to add city Press yellow key to delete city Press red key to update 4 9 RSS Reader RSS Channel list is on the left side of window RSS News list is on the right side of window Press PR PR key to select channel you wanted Press red key to update Press green key to add channel Press yellow key to delete channel Press blue key to edit channel 5 Game 1 Press OK key or key to enter into the game 2 Press PR PR keys to move the cursor up or down 3 Press EXIT key or key to move the focus to the left menu 4 Select the game that you want to play and press OK key to enter into the window 6 REC 6 1 Media Player USB menu will be automatically shown when insert U disk to USB port except auto scan multi picture upgrade Or open USB menu according to Menu gt REC gt Media Player Press OK to enter into this window USB menu will be disabled when no USB device is plugged Media Play List will not be saved when USB plug out orstandby or power off Move scroll bar when press up down key page up or down by page key Go into sub directory when press ok key in the file directory play the selected file when scroll baris onthe file automatic return USB menu after play is over 27 MENU INFORMATION Inedit window Red key Press red key to enter the rename window you can rename the file by press number 0
15. ess A Dkeys to selectthe satellite in circle Or press OK key to pop up the drop down list then select the desired satellite in the list and press OK key to confirm Transponder The same operation asthe above 2 7 MENU INFORMATION Position No amp Save The range is from 0 to 63 0 delegates the original position You can selectthe proper value when you has rotated the antenna Go to X Press OK key to pop up the drop down list select the proper position reference or from 1to 63 to realize the selected position West lt Save gt East Press Ikeyto turn west while press MX keyto turn east Press OK key to pop up the dialogue Are you sure to change this satellite s position Press OK key at the Yes button to save the current position or press OK key at the No button to cancel the operation Recalculation Press OK key to pop up the dialogue Are you sure to change this satellite s position Press OK key atthe Yes button to recalculation 5 Limit Setup Press OK key to pop up the Limit Setup window Limit Setup Press Ckeysto switch among Disable Limit East Limit and W est Limit Limit Setup Move cursor to the Limit Setup button You can press lt 1 key to turn west or press Mikey to turn east Goto Reference Press OK key to go to reference If you select Disable Limit in the above Limit Setup item this button will turn grey 6 If select USALS Delete All item will turn grey Local Longitud
16. he character and use the colour keys to realized the corresponding operation 7 4 Number Use the numeric keys 0 9 to input the number of the desired channel If the inputted number is beyond the valid channel number system will No such a channel and press OK key to close this message 7 5 TV RADIO Innormal mode press TV RADIO keyto switch between TV mode and Radio mode 7 6 Up Down Channel Change Press PR PR keys to change the channel up or down If in the all satellites group you can select channel in all searched channels If in the specific satellite only can select channel in the satellite group 7 7 Left Right V olume Press 24 eysto change the volume Press _keysto decrease the volume while press Ktkeys toincreasethe volume 7 8 Mute Press Kkey to turnoff the volume You can press Kkey once again to restore the volume or press lt FReysto increase the volume 7 9 Pause During the viewing you can press PAUSE key to stop the picture while the volume continues Y ou can play the picture by pressing PAUSE key once again 7 10 OK 1 During the viewing or listening press OK key to pop up the TV program list or the Radio program list 2 Press PR PR keys to select the channel up or down and then press OK key to play this channel in full screen 3 Press 1 keys to select the satellite 4 Press MENU or EXIT key to close this window 3 E MENU INFORMATION 7 11 Audio 1 Pre
17. he same operation as the above Edit Satellite window here we don t explain any more 5 Press blue colour key to pop up the dialogue Are you sure to delete Select Yes button and press OK key to delete the selected satellite You can cancel this operation by pressing OK key atthe NO button MENU INFORMATION 2 3 Antenna Setup PartA Fixed Suppose that you have selected Fixed Antenna in the Antenna Connection window 1 Satellite All selected satellites in the satellite list are displayed in this item Press 1Dkeysto select the satellite in circle Or press OK key to pop up the drop down list then select the desired satellite in the listand press OK key to confirm 2 LNB Freq Transponder DiSEqC1 0 DiSEqC1 1 Thesame operationasthe above 3 22K Polarity You can press 21 ys toselectin circle Part B Motor Suppose that you have selected Motor Antenna in the Antenna Connection window 1 LNBT ype Select the proper LNB type 2 Motor T ype Select between DiSEqC1 2 and USALS If you select DiSEqC1 2 the following Local Longitude and Local Latitude items will turn grey 3 Delete All Press OK key to pop up the dialogue Are you sure to clear set satellite position of this tuner Press OK key atthe Yes button to clear all the memories about the position of the satellites that are connected to the current tuner 4 Motor Setting Press OK key to the Motor Setting window Satellite Pr
18. ill can timeshift EN GENERAL INFORMATION For Y our Safety 3To avoid electric shock hazards do not Keep the receiver away from flower vases open the cabinet refer servicing to qualified tubs sinks etc in order to avoid damaging personnelonly the equipment 3Do not expose the receiver un der the 2Do not block ventilation holes of the sunlight And keep it away from the heat Receiver sothatair can circulate freely source ah foo ELS if 2 When the abnormal phenomenon occur 9 Do not touch the receiver during thunder youshould cut offthe powerimmediately since that might create electric shock hazards 3 Switch the receiver off whenever it remains Be sure to turn the Receiver off and outofserviceforanextended period disconnect the AC power cord before cleaning the Receiver surface If the surface is dirty wipe clean with a cloth which has been dippedina weak soap and water solution and wrung out thoroughly andthen wipe again witha dry cloth GENERAL INFORMATION IMPORTANT SAFETY INSTRUCTIONS 1 Read these instructions All the safety and operating instructions should be read before this product is operated 2 Keep these instructions The safety and operating instructions should be retained for future reference 3 Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to 4 Follow all instructions All operating and use instruc
19. itches between TV and Radio mode Switches backto previous channel Displays the favorite group list Display the satellite window Display the Find window Show information of the current channel Press this key one time to run menu onscreen Moves up down a page in the list Executes the selected iteminthe menu screen or enters the desired valuein any input mode When watching a channel change channels or move to the next higher or lower item in the menu When watching a channel adjust the volume or move to the left or right item in the menu Return to the previous menu on the menu screen orescape fromthe menu Ca Il up the EP G E lectronic Program Gu ide Dis play the Audio window Enter into the sleep in mode Switch to teletext or subtitle mode Switch between TV and AV modes Changes the HD Format Record the program Play and stop the program Press to fast forward or fast backward Press to slow forward or slow backward Timeshift function key Pressonceto pausethescreen picture press once again to go to the normal mode 3 The pictureis only for reference please make the object as the standard GENERAL INFORMATION Rear Panel CONNECTTO AUDIOR L TO TVOR AUDIO TUNER CONNECTTO ADIGITAL AMPLIFIER CONNECTTO APC FOR S W UPGRADE 175V 250V 50Hz 60Hz 3 C ES RT x Orere MOCH esigiJed in as anufkctured Under the Licen n LNB IN LNB OUT 13 18V 400mA max POWER ON OFF
20. llow colour key to save and exit or press blue key to cancel and exit Numeric keys Press numeric key repeatedly display in circle 1 a al ABC2 DEF3 GHI4 JKL5 MNO6 PQRS7 TUV8 WXYZ9 O LD NI OT BR WIN space _ 0 If the name is empty system will pop up a dialogue informing Name once yellow colour key is pressed Press OK key to close this dialogue 6 MENU INFORMATION iii Delete blue colour key In Delete window press blue colour key to move the Delete button upward Select the program and press OK key to mark this program with the deletion mark You can cancel this mark by pressing OK key again Press EXIT key to pop up the dialogue Are you sure to save Select Y es button and press OK key to save or select NO button and press OK key to exit withoutsaving 1 2 Radio Channel List Same operation as 1 1 TV Channel List here we don t explain any more 1 3 Delete channels by satellite Press OK key to pop up delete channels by satellite window press PR PR key to select the programs and press OK key to add delete mark press OK again the delete mark will disappeared Press red key to select all programs to add delete mark press yellow key to pop up the dialogue Warning Do you really want to delete all channels Select Yes button and press OK key to save or select NO button and press OK key to exit withoutsaving 2 Installation 1
21. ote Control Batteries User s Guide 3 AV cable General Operation J3Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus These menus will help you get the most from your receiver guiding you through installation channel organizing viewing and many other functions All functions can be carried out using the buttons on the RCU and some of the functions can also be carried out using the buttons on the front panel 2The receiver is easy to use always at your command and adaptable for future advances Please be aware that new software may change the functionality of the receiver 9 Should you experience any difficulties with the operation of your receiver please consult the relevant section of this manual including the Problem Shooting or alternatively call your dealerora customer service adviser oo KA GENERAL INFORMATION RCU a amp a 20 ABC DEF 00001 GHI JKL MNO SR 0008 ye PORS TUV WXYZ 0000 a FIND 20090 INFO 2 y OK LIST OK LIST y PR PR aa et EXIT INFO EPG INID V FORMAT TXT L Id RECORD PLAY STOP SHIFT gt SLEEP TXT 0000 TV AV FAST SLOW V FORMAT RECORD gt A fe FORTEC STAR re lt gt SHIFT PAUSE Function Standby On Standby Off When watching a channel mute the sound Enter number of the required menu item or selecta channel number to watch Sw
22. ped 15 CAUTION These servicing instructions are for use by qualified service personnel only To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so 16 Ensure that the ventilation is not impeded by covering the ventilation openings with items such as newpapers table cloth curtains etc 17 WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids such as vases shall not be placed on apparatus 18 WARNING For the terminals marked with symbol of 4 may be of sufficient magnitude to A E GENERAL INFORMATION 19 20 21 22 23 24 constitute a risk of electric shock The external wiring connected to the terminals requires installation by an instructed person or the used of ready made leads or cords CAUTION Danger of explosion if battery is incorrectly replaced Replace only with the same or equivalent type WARNING The battery battery or batteries or battery pack shall not be exposed to excessive heat such as sunshine fire or the like WARNING The mains plug is used as disconnect device the disconnect device shall remain readily operable Explanation of symbol marking signal lamp or similar means indicate that apparatus is completely disconnect
23. re to delete Press OK key at the Yes button to delete the selected TP or press EXIT key to cancel the operation 5 Press blue colour key to pop up the TP Search window FTA only Scan Channel Network Search Press 24 K ysto select the proper option Press OK key atthe OK button to start searching 3 System Setup 1 Press OK key or pkey to move the cursor to the right menu 2 Press PR PR keys to move the cursor up or down 3 Press EXIT key or Zzukey to move the focus to the leftmenu 3 1 Language 1 Press OK key to enter into the Language window Press 21 eys to select the language in circle while press PR PR keys to move the cursor up or downin circle 2 Press MENU key or EXIT key to save and exit 3 The types of the language pleaser refer tothe configuration ofthe customer MENU INFORMATION 3 2 TV System Press PR PR key to move the cursor up or down while press 24 keys to change the setting and the setting will take effect immediately 1 Display Mode Select among 1080p_50 1080p_60 720p_60 720p_50 576p 576i 480p 480i By Native TV and By source 2 Aspect Mode Select among 4 3LetterBox 4 3PanScan 16 9 and Auto 3 Video Output Select between RGB and YUV 4 RF System Select amongP AL BG P AL I P AL DK and NTSC 5 RF Channel PAL 21 69 NTSC 14 83 6 Digital Audio Out Select between LPCM Out andBS Out 3 3 Display Setting 1 Brightness Press 21 key
24. shift to Record Select between On and Off 6 4 Remove USB device safely Press OK on thisitemit will pop up a dialogue Y ou can safely remove USB device now then you can move your USB device safely 7 Hot Key 7 1 Info Press INFO key to pop up the Info bar Press INFO key again to pop up the program guide of the current program 7 2 EPG Press EPG key to enter into the EPG window 1 Press PR PR 24 keys to select up or down left or right 2 Press red colour key to pop up the Time Bar window Press PR PR keys to select up or down while press 21 keys to select left or right in the time bar Press OK key at this button to return to the EPG window ar Press OK key at this button to move the cursor to the current time line Press OK key to push the time forward or backward by half an hour 44 gt gt Press OK key to push the time forward or backward by half an hour 44d D Press OK key to push the time forward or backward by a day 3 Detail Information Inthe EPG window press PR PR 24 eys to select the channel and program and press OK key to know the detail information of the current program 4 Press green colour key to enter into the Timer window You can add the current program to the Timer If 8 timers are already yet system will inform you Timer is full 29 MENU INFORMATION 7 3 Find Press FIND key on to pop up the Find window Use numeric keys to enter into t
25. ss Keys to enter into the Audio window 2 Press Keys to select among Left Right Stereo and Mono 3 Changing the audio mode is only connected with the current channel not all the channels 4 Press MENU or EXIT key to close this window 7 12 Recall Press rReyto switch the current channeltothe previous channel 7 13 FAV 1 Press FAV key to pop up the favourite group window 2 Press 1 Mkeys to select the favorite group Press PR PR keys to select the channel up or down Press OK key at the selected channel to view it in full screen Press MENU or EXIT key to exit 3 If there is no favorite channel system will inform No FA V Channel when you press FAV key 7 14 T eletext Press TXT key to open the teletext on the screen If there is no teletext system will inform No Teletext Data Press EXIT key to exit TROUBLE SHOOTING The display on the front panel does not light up Main cable is not connected Checkthatthe main cableis plugged into the power socket No sound or picture but the front panel shows red light The receiver isin standby mode Pressthe standby button No sound or picture The satellite dish is not pointing atthe satellite Adjust the dish Check the signal level inthe Antenna Setup menu No signal or weak signal Check the cable connections LNB and other equipment connected between the LNB and the receiver or
26. ss green colour key again to exit from the skip mode and you will find the Skip button return to the origin position 6 Press yellow colour key to move the Move button upward Select the program and press OK key to mark this program with the move mark Press PR PR keys to move the cursor to the position where you want to locate and press OK key to confirm Press yellow colour key again to exit from the yellow mode and you will find the yellow button return to the origin position 7 Press blue colour key to enter into the Edit channel window A E MENU INFORMATION i Sort red colour key Press red colour key to pop up the Sort drop down list Name A Z The ascending order omitting the character the number is ahead then the capital letter at last the lowercase Name Z A The opposite order of the above Name A Z Free Scramble All FT A programs are listed ahead while all scrambled programs are listed last Lock all locked programs are listed at the last ii Edit green colour key Press green colour key to move the Edit button upward Select the program and press OK key to pop up the Rename window In Rename window press red colour key to switch between capital letter and lower letter press green colour key to delete the character on the cursor press 21 keys to move the cursor left or right press numeric keys 0 9 to input the character please refer to the down table Press ye
27. tem If Record is selected the Wakeup Message is displayed in the following item 3 Wakeup Date On T ime Use numeric keys to input the valid date Duration Set the gap time After waking up system will power off automatically after the duration time 3 6 Parental Lock Before entering into the Parental Lock window you need input the correct password The default password is 0000 1 Menu Lock Press 24 keys to select between Off and On If select On you can not enter into the window before entering the password 2 Channel Lock Press 21 keysto select between Off and On The default value is Off If select On you can not view the locked channel set in Chanel List Edit window until you have inputted the correct password 3 New Password User numeric key 0 9 toinput thenew password 4 Confirm Password Input the new password once again Confirm password must be the same as the New password System will inform you Change password successfully while they are the same or inform you to input the password of Confirm password once again when they are notthe same A EE MENU INFORMATION 3 7 OSD Setting 1 OSD Timeout Press 24 keys toselect from 1 to 10 by step1 The default values ls 5 2 OSD Transparency Press keys to select among Of f 10 20 30 40 The default option is Off Press MENU or EXIT key to save and exit 3 8 Favorite There are 32 favorites group listed in this window
28. tions should be followed 5 Do not use this apparatus near water The appliance should not be used near water or moisture for example in a wet basement or near a swimming pool and the like 6 Clean only with dry cloth 7 Do not block any ventilation openings Install in accordance with the manufacture s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat 9 Ifthe provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 10 Protect the power cord from being walked on or pinched particularly at the plugs convenience receptacles and at the point where they exit from the apparatus 11 Only use attachments accessories specified by the manufacturer 12 Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart or rack is used use caution when moving the cart apparatus combination to avoid injury from tip over 13 Unplug the apparatus during lightning storms or when unused for long periods of time 14 Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture does not operate normally or has been drop
29. to select from 0 100 2 Contrast Press 21 ey to select from 0 100 3 Saturation Press 21 key to select from 0 100 4 Hue Press 21 k amp y to select from 0 100 5 Sharpness Press 21 ey to select from 0 10 3 4LocalT ime Setting 1 Summer T ime Select between ON and OFF OFF delegates the normal time If select ON time will add one hour 2 GMT Offset When select ON in GMT Usage item system will get the date and time information from the screen automatically Date and Time two items will turn grey Select the proper option inthe GMT Offset item The default setting isGMT ON 3 Date Time When select OFF in GMT Usage Date and Time two items take effect while GMT Usage turns grey Use numeric keys to input the desired value 5 After setting press MENU key or EXIT key to exit and save If the value is invalid system will inform Invalid input Continue to edit Press OK key atthe Yes button to continue the modification or press OK key at the No button to exit without saving 2 2 MENU INFORMATION 3 5 Timer Setting If there is no program you can not enter into this window There are 8 timers that can be set Select Timer up or down and press OK key to enterinto the setting window 1 Timer mode The default mode is off You can setthe timer once daily and off 2 Timer Service Select between Channel or Record If Channel is selected the Wakeup Channel is displayed in the following i
30. ulti Satellite Search From the Multi Satellite Search window you can search several satellites atthe one time 1 Satellite All selected satellites in the satellite list window are displayed on the down part You can press 21 Keys to switch among them 2 FTA Only Press 21 Dkeysto select between Yes and No 3 Scan Channel Press 24 keys to select among TV Radio TV Channel Radio o S MENU INFORMATION 4 Network Search Select between No and Yes This item turns grey when Auto Scanis selected inthe following Scan mode item 5 Scan Mode Press 21 keys to select between Auto Scan and Preset Scan Auto Scanis Blind scan while PresetScanis tosearchthe preset frequencies 6 Search Press OK keyto start searching 2 6 TP List 1 Press PR PR keys to select the proper satellite 2 Press red colour key to pop up the Edit TP window Frequency Symbol rate Press ik ys to add or reduce by step one Or press numeric keys 0 9 to input the desired value The range of the frequency is 3000 13500 while the range of the symbol rate is 1000 45000 The inputted value is beyond this range the value will return to the origin value Polarity Press 24 Mkeysto switch between Vertical and Horizontal 3 Press green colour key to pop up the Add TP window Since the same operation as the above Edit TP window here we don t explain any more 4 Press yellow colour key to pop up dialogue Are you su
31. you can not enter into the menu unless the correct password is inputted The default password is 0000 2 Press PR PR keys to move the cursor up or down 3 Press EXIT key or zey to move the focus to the left menu 1 1 TV Channel List 1 Press lt keys to select satellite 2 Press PR PR keys to select the program that you want to play and then press OK key to view it in the small window If move the yellow cursor to select up or down you will see a gray line which indicates the playing program in the small window o o 3 Press FAV key to move the FAV button upward Select the program and press OK key to pop up the favourite group list In the list select the group that you want to add into and press OK key and then you will find the favourite mark is displayed at the right side of the selected program Press FAV key again to exit from the fav mode and you will find the FAV button return to the origin position 4 Press red colour key to move the Lock button upward Select the program and press OK key to mark this program with the Lock mark Y ou can cancel this mark by pressing OK key once more Press red colour key again to exit from the lock mode and you will find the Lock button return to the origin position 5 Press green colour key to move the Skip button upward Select the program and press OK key to mark this program with the skip mark Y ou can cancel this mark by pressing OK key once more Pre
Download Pdf Manuals
Related Search