Fisher LNS-T10 User's Manual
Contents
1. AAN N AD 1 1 CJ 1 1 1 1 CJ ca i O Be E OA EEA 1 4 00000 HUUUUUUUUO 4 5 E L EE L L L L C E L L C WO L 2 5 9 A 0 9 A N Kel 4 A Y 2 rh 1 H N 3 e ATTS 6 T x 42. LCD Projector Lens Replacement Procedure Model Number LNS 1T10 LNS W10 Notes on Lens Replacement Lens replacement should be performed by the qualified service personnel It should be followed by this procedure precisely Before an attempt to replace the lens confirm the model number both the LCD projector and the lens and prepare the proper lens The lens cover is on the lens for protection Be sure to remove the lens cover before installation When installing or removing the lens be careful not to stain scratch or damage the lens If you have any questions contact the dealers Parts List Following parts are contained in the packing LENS 1 piece LIGHT BLOCK SHEET Spare 1 piece Part No 610 301 5040 Notes on Lens Replacement After the lens replacement before attaching the top cabinet check the following things 1 Check the lens is properly installed 2 Check no wiring is tangled on the gear of the lens motor or other mechanical parts 3 Check no parts is missing or no mounting part is lost Printed in Japan 1AA6P1P3841 IDEP Lens Replacement Procedure Perform the steps 1 6 for lens replacement First set the lens at the highest position with lens shift adjustment Remove the Lens Cover and the Top Cabinet 1 Turn the Lens Cover counter clockwise and pull it toward front to remove the Lens Cover 2 Remove the two screws SCREW A and remove the Top Cabinet 1 Pull
3. Lens Cover toward front and remove tt 2 Remove the two screws SCREW A and remove the Top Cabinet Remove the Light Block Sheet Base Slide the Light Block Sheet Base upward to remove it TOP CABINET SCREW A is te A O lt LENS COVER Fig 1 1 TOP CABINET SCREW A LIGHT BLOCK SHEET BASE 3 Remove the Lens Push the Lens Lock Lever and turn the lens counter LENS LOCK clockwise 1 4 turn and then take it out LEVER Be careful not to drop the lens 4 Mount the Lens 1 Remove the protective caps front and back on the lens 2 Put the Light Block Sheet through the lens 3 Insert the lens into the Lens Bracket of the projector as matching the mark on the lens to that on the Lens Bracket 4 Turn the lens clockwise until the lens is locked with Lens Lock Lever LENS BRACKET Insert the lens into the Lens Bracket as matching these marks 5 Mount the Light Block Sheet Base Mount the Light Block Sheet Base LIGHT BLOCK SHEET BASE LIGHT BLOCK SHEET Light Block Sheet should be located under the hooks 6 Mount the Top Cabinet and the Lens Cover For the Cabinet Fig 6 1 1 Mount the Top Cabinet with 2 screws 2 Mount the Lens Cover Position the mark UP of the Lens Cover on top and push into the cabinet Turn the Lens Cover clockwise until it is securely locked For the Cabinet Fig 6 2 1 Mount the top cabinet with 2 screws 2 Push into the Lens Cover to the Top Cabi
4. net Confirm the top and bottom of the lens cover The part circled in Fig 6 2 should be fitted Turn the projector on and check Lens shift Zoom and Focus is operating properly If Light Block Sheet interfere with those operations check if the Light Block Sheet is set properly O O LNS TLO LNS W10 I i i i I i i i O GO COC A A OIC OI O GO GO AG A A A A A O GO COC A A A A AA O GO COC A A A A AA 1 10 610 301 5040 HUUUUUUUUUUUUUUL 1 2 3 L 1AA6P1P3841 IDEP moU L 1 1 00000000 00000 A 0000000000000 2 4 00000000 z oooggg 1 1 l A 2 i I 2 2
Download Pdf Manuals
Related Search