Fisher-Price T4265 Instruction Sheet
Contents
1. the screws Tighten and loosen all screws with a Phillips screwdriver Do not over tighten the screws 3 Battery Installation Hint We recommend using alkaline batteries for longer battery life 1 5V x3 D LR20 Mobile Base e Loosen the screws in the battery compartment door with a Phillips screwdriver Remove the battery compartment door e Insert three D LR20 alkaline batteries e Replace the battery compartment door and tighten the screws IMPORTANT Under normal use conditions the batteries in the mobile base will require replacement more often than the batteries in the remote When sounds or lights become faint or stop it s time for an adult to change the batteries j 1 5V x 2 _ AAA LRO3 Remote e Loosen the screw in the battery compartment door with a Phillips screwdriver Remove the battery compartment door e Insert two AAA LRO3 alkaline batteries e Replace the battery compartment door and tighten the screw Base Crib Connector e Fit the crib connector to the base and tighten both screws IMPORTANT Make sure the straps are over the top of the crib connector e First press the button on the mobile base next to the socket and then slide the socket door open e Fit the arm into the socket in the base and tighten both screws Assembly Socket Arm aN e Fit the end of the arm to the socket on the mobile hub e Tighten both screws in the arm to secure2. T4265 Fisher Price Please keep this instruction sheet for future reference as it contains important information Requires three D LR20 alkaline batteries for mobile Operation and two AAA LRO3 alkaline batteries for remote operation batteries not included Adult assembly is required Tool required for assembly Phillips screwdriver not included www fisher price com Consumer Information A WARNING Prevent Entanglement Injury e Keep mobile out of baby s reach e Remove mobile portion of product from crib or playpen when baby begins to push up on hands and knees e This product may not attach to all crib designs Do not add additional strings or straps to attach to crib or playpen e Use ONLY attached to a crib or playpen IMPORTANT Always attach with all provided fasteners tightly to a crib or playpen according to the instructions Do not add additional strings or straps to attach to a crib Check frequently e The mobile portion of this product may be used from birth until 5 months e The base portion of this product may be used from birth until 36 months e A crib mobile is intended for visual stimulation and is not to be grasped by a child e Wipe this toy with a clean cloth dampened with a mild soap and water solution Do not immerse this toy The soft toys are surface washable e This toy has no consumer serviceable parts Do not take this toy apart e f this product begins to operate e
3. anging over the crib top rail Pull the bottom strap through the crib rails e Buckle the straps Make sure you hear a click 9 Crib Attachment e Make sure the straps are tightened securely around the crib rail e While pushing the tab at the bottom of the buckle pull the free end of the strap to tighten on the rail Hint You can secure the free end of the strap to the base 10 Crib Attachment e Tie the base strings to a crib spindle Note It is better the tie the strings in a knot than a bow since a bow may be easily untied Bottom of Base 7 Inches 18 cm Mattress e f the distance between the base and the mattress is less than 7 Inches 18 cm lower the crib mattress NN Use IMPORTANT e In the unlikely event that use of the remote interferes with normal use of other remote controlled equipment such as televisions stereos or use of other electronic or battery powered appliances interfere with operation of the mobile do not use both appliances at the same time e For best performance between the mobile and the remote avoid using the remote in areas of bright light In bright natural or artificial light you may notice loss of range Move the mobile or otherwise reduce the amount of light to improve performance e When using the remote make sure that the arrow on the mobile base is pointing towards the transmitter window on the remote For best results make sure the path between
4. pareil num rique de la classe B est conforme la norme NMB 003 du Canada utilisation de ce dispositif est autoris e Seulement aux conditions suivantes 1 il ne doit pas produire de brouillage et 2 l utilisateur du dispositif doit tre pr t a accepter tout brouillage radioelectrique re u m me si ce brouillage est susceptible de compromettre le fonctionnement du dispositif Fisher Price Inc a subsidiary of Mattel Inc East Aurora NY 14052 U S A 2009 Mattel Inc All Rights Reserved and designate U S trademarks of Mattel Inc FCC Statement United States Only This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the sepa
5. ration between the equipment and receiver e Consult the dealer or an experienced radio TV technician for help Note Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user s authority to operate the equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may Cause undesired operation T4265pr 0920 PRINTED IN CHINA Crib Attachment A WARNING Prevent Entanglement Injury e Keep mobile out of baby s reach e Remove mobile portion of product from crib or playpen when baby begins to push up on hands and knees e This product may not attach to all crib designs Do not add additional strings or straps to attach to crib or playpen e Use ONLY attached to a crib or playpen IMPORTANT If you are attaching this toy to a crib side rail that can be lowered and raised make sure the crib side rail is in the raised locked position whenever a child is in the crib Crib Top Rail pE a Buckles e Position the base so that the decorated side faces the inside of the crib e Fit the base onto the crib top rail Hint The base is designed to fit most crib designs Please refer to the main illustration and the inset photograph e Make sure the top strap is h
6. rratically you may need to reset the electronics Slide the power volume switch on the mobile base off and then back on Remove the batteries from the remote and replace them X e Protect the environment by not disposing of this product with household waste 2002 96 EC Check your local authority for recycling advice and facilities Europe only Battery Safety Information In exceptional circumstances batteries may leak fluids that can cause a chemical burn injury or ruin your product To avoid battery leakage e Do not mix old and new batteries or batteries of different types alkaline Standard carbon zinc or rechargeable nickel cadmium e Insert batteries as indicated inside the battery compartment e Remove batteries during long periods of non use Always remove exhausted batteries from the product Dispose of batteries safely Do not dispose of product in a fire The batteries inside may explode or leak e Never short circuit the battery terminals e Use only batteries of the same or equivalent type as recommended e Do not charge non rechargeable batteries e Remove rechargeable batteries from the product before charging e f removable rechargeable batteries are used they are only to be charged under adult supervision 2 Parts Mobile Hub 3 Long Spokes Crib Connector Remote Base Note All of the screws used to assemble this toy are attached to the product Follow these instructions carefully to fully secure
7. the transmitter window on the remote and the mobile base are in a direct line and free of obstacles Position the mobile base so that the arrow points to the area from which you re most likely to use the remote 12 Use 13 Light Control Button e Press to turn on the night light e Press the button again to turn the night light off Hint Make sure the mobile power S on Power Volume Switch e Slide the switch to ON with low volume 4 or ON with high volume When finished using the product slide the switch OFF O Mode Select Switch Slide the switch to select a mode d t gt Music and Motion Music only Music Buttons Press the buttons to select music from Beethoven or Mozart or ocean sounds Convert to Night Light Remove the mobile and use as a music box with a night light En T a i ia ai oo ie a N oe i t ae 2 Fas 4 e Loosen both screws in the arm near the mobile base Lift and remove the arm e Close the socket door on top of the mobile base e Store the mobile in a safe place for future use 14
8. the mobile hub Long Spoke e Attach a long spoke to the mobile hub as shown e Tighten the screw in the long spoke e Repeat this procedure to attach the remaining long spokes to the mobile hub 6 Short Spoke e Attach a short spoke to the mobile hub as shown e Tighten the screw in the short spoke e Repeat this procedure to attach the remaining short spokes to the mobile hub Consumer Information CONSUMER ASSISTANCE 1 800 432 5437 US amp Canada 1300 135 312 Australia service fisher price com Fisher Price Inc 636 Girard Avenue East Aurora NY 14052 Hearing impaired consumers 1 800 382 7470 Outside the United States Canada Mattel Canada Inc 6155 Freemont Blvd Mississauga Ontario LOR 3W2 www service mattel com Great Britain Mattel UK Ltd Vanwall Business Park Maidenhead SL6 4UB Helpline 01628 500303 www service mattel com uk Mattel Europa B V Gondel 1 1186 MJ Amstelveen Nederland Australia Mattel Australia Pty Ltd 658 Church Street Locked Bag 870 Richmond Victoria 3121 Australia New Zealand 16 18 William Pickering Drive Albany 1331 Auckland ICES 003 This Class B digital apparatus complies with Canadian ICES 003 Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation NMB 003 Cet ap
Download Pdf Manuals
Related Search