Fisher-Price H7182 User's Manual
Contents
1. Product features and decorations may vary from photo above Instructions Model Number H7182 N WARNING IMPORTANT KEEP FOR FUTURE REFERENCE Please read these instructions before assembly and use of this product Adult assembly is required Tool needed for assembly Phillips Screwdriver not included Requires three AA LR6 alkaline batteries for toy operation not included FisherPrice www fisher price com Warning and Caution WARNING Prevent serious injury or death from falls or sliding out e The child should at all times wear a safety harness correctly fitted and adjusted The tray is not designed to hold the child in the chair e Always keep child in view while in the high chair e Never leave child unattended e It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted CAUTION This product contains small parts in its unassembled state Adult assembly is required Consumer Information Great Britain Mattel UK Ltd Vanwall Business Park Maidenhead SL6 4UB Helpline 01628 500302 Australia Mattel Australia Pty Ltd 658 Church Street Locked Bag 870 Richmond Victoria 3121 Australia Consumer Advisory Service 1300 135 312 New Zealand 16 18 William Pickering Drive Aloany 1331 Auckland Asia Mattel East Asia Ltd Room 1106 South Tower World Finance Centre Harbour City Tsimshatsui HK China Food Tra2. sure it is latched in position WARNING Prevent serious injury or death from falls or sliding out e Always leave wheels locked e Never use near steps TO LOCK Press the tab down until you hear a snap TO UNLOCK Lift the tab up Base Tray e Fit the electronic toy to the tab on the back of the high chair as shown e This prodduct may be wiped clean using a mild cleaning solu tion and a damp cloth Do not immerse the base tray e The food trays and toys are dishwasher safe Simply remove the food tray from the base tray and place in your dishwasher To remove the pad e Remove the four elastic loops from the pegs on the underside and back of the seat e Unfasten the pad strap from the seat back e Feed the shoulder portion of the waist shoulder belts through the slots in the seat back and the pad e Feed the waist portion of the waist shoulder belts and crotch belt down through the slots in the seat e Remove the waist shoulder belts and crotch belt through the Slots in the pad e Unfasten the pad fasteners from the front edge of the seat bottom e Remove the pad e To replace the pad refer to Assembly steps 15 19 IMPORTANT Never use this product without the restraint system Replace the waist shoulder belts and crotch belt e Fit the holes on the base tray latches onto the pegs on the back of the high chair frame Pull Frame Release Latch e With the legs all the way open lower the sea
3. The child should at all times wear a safety harness correctly fitted and adjusted The tray is not designed to hold the child in the chair Q R Base Tray N N Armrest e Fit the base tray onto the seat armrests Push down until the base tray snaps into place Hint Before use thorougly wash all parts the trays that may contact food Base Tray Release Bar Hint The base tray can be adjusted for your child s comfort two ways see steps 8 and 9 e While pushing the release bar on the front of the base tray adjust the base tray forward or backward e While squeezing the latches underneath the base tray adjust the base tray forward or backward TS tI Hint The base tray can be removed two ways see steps 10 and 11 e Squeeze one or both of the latches underneath the base tray and lift Base Tray Using the Trays and Toys Electronic Toy Base Tray Release Bar Groove e While pushing the release bar on the front of the base tray pull the tray base towards you and remove Base Tray e Insert the tab on the edge of the electronic toy into the groove in the front of the base tray e Push the electronic toy down to secure in place Base Tray Hint The electronic toy does not fit into the food tray e To remove the electronic toy press the button on the front of the electronic toy Remove the electronic toy e Fit the food tray in
4. anchored end of the waist belt up through the buckle to form a loop Pull the free end of the waist belt O Anchored End Loosen To loosen the waist belts Feed the free end of the waist belt up through the buckle to form a loop Enlarge the loop by pulling on the end of the loop toward the buckle Pull the anchored end of the waist belt to shorten the free end of the waist belt Securing Your Child Hold Adjuster ve Pull Strap Down Slide Adjuster Down z RASY A Munta K L y K aN k l e H DOE e To tighten the shoulder belts Hold the adjuster and pull the front shoulder strap down e To loosen the shoulder belts Slide the adjuster down Note After adjusting the restraint system to fit your child make sure you pull on it to be sure it is securely fastened q i i N q L Ni o lA U y A Y a Ja OH ST CT KS SL rp TZ it j To change shoulder belt slots From the back of the high chair push the shoulder portion of the waist shoulder belts through the seat back slots From the front of the high chair pull the shoulder portion of the waist shoulder belts out and then fit them back through the desired shoulder belt slots in the headrest pad seat pad and the seat back Pull on the belts to be sure they are secure in the seat back Using the Trays and Toys WARNING Prevent serious injury or death from falls or sliding out
5. atteries in a fire The batteries may explode or leak e Never short circuit the battery terminals e Use only batteries of the same or equivalent type as recommended e Do not charge non rechargeable batteries e Remove rechargeable batteries from the product before charging e f removeable rechargeable batteries are used they are only to be charged under adult supervision Securing Your Child IMPORTANT Before each use inspect this product for damaged hardware loose joints missing parts or sharp edges DO NOT use if any parts are missing or broken Contact Mattel for replace ment parts and instructions if needed Never substitute parts Place the high chair on a level stable surface away from electri cal flexes Be sure to keep electrical flexes out of child s reach A WARNING Prevent serious injury or death from falls or sliding out The child should at all times wear a safety harness correctly fitted and adjusted The tray is not designed to hold the child in the chair Waist Shoulder Belt Waist Shoulder Belt e Place your child in the seat Position the crotch belt between your child s legs e Fasten both waist shoulder belts to each side of the crotch belt Make sure you hear a click on both sides e Check to be sure the restraint system is securely attached by pulling it away from your child The restraint system should remain attached Anchored End To tighten the waist belts Feed the
6. he other end of the front base with the remaining screw retainer and 10 x 2 2 cm black screw Hint The 10 x 2 2 cm black screws may have been assembled to the screw retainers ANNU 8 x 1 9 cm Screw 2 Seat Height Adjusters Nt Back and Bottom View From the back and bottom of the assembly insert a 8 x 1 9 cm screw through both seat height adjusters and the ends of the seat bottom tube Tighten the screws Elastic Loops Back and Bottom View Lift the assembly upright From the front of the assembly place the pad onto the seat Lift the bottom of the pad Insert the two elastic loops on the pad through the holes in the seat bottom From the back and bottom of the seat hook the elastic loops to the tabs on the seat Shoulder Portion Insert the crotch belt through the slot in the pad Make sure the crotch belt is not twisted e Fold the top of the pad down e Remove the shoulder portion of the waist shoulder belts by feeding them through the slots in the seat back ti t ti t t 1 e Lift the top of the pad e Thread the waist shoulder belts through the bottom slots in the back of the seat pad Upper Shoulder Belt Slots Ox A ss Lower Shoulder Belt Slots INK j Shoulder Portion e Fit the top of the pad over the seat back e Fold the bottom edge of the pad under the edge of the seat bottom to fasten it e Insert the s
7. houlder portion of the shoulder waist belt through the slots in the pad and seat back Use the lower shoulder belt Slots for a smaller baby Use the upper shoulder belt slots for a larger baby Elastic Loop iy ee a ee Cc ft OT LUCY Pn GZ reeaisoP in ee A wtih Ends e Fit the pad strap through the handle and press it to the fasten er on the back of the seat e From behind the seat be sure the shoulder portion of the waist shoulder belts are secure in the seat back slots e Hook the elastic loops on each side of the pad onto the tabs in the seat back Battery Installation 1 5V x 3 AA LR6 Shown Actual Size Battery Compartment e Loosen the screws in the battery compartment Remove the battery compartment door e Insert three AA LR6 alkaline batteries e Replace the battery compartment door and tighten the screws Hint We recommend using alkaline batteries for longer battery life Batteries may leak fluids that can cause a chemical burn injury or ruin our product To avoid battery leakage e Do not mix old and new batteries or batteries of different types alkaline standard carbon zinc or rechargeable nickel cadmium e Insert batteries as indicated inside the battery compartment e Remove batteries during long periods of non use Always remove exhausted batteries from the product Dispose of bat teries safely Do not dispose of b
8. om tubes as shown Tighten the screws e Push the seat bottom tubes back and forth to be sure they are secured to the seat bottom If the seat bottom tubes move you have probably not fastened them properly Remove the screws and check to be sure the screw holes in the seat bottom tubes and seat bottom plastic rings are aligned Replace and tighten the screws Footrest Insert Screws Here a 10 x 2 2 cm Black Screw 2 10 x 2 2 cm Black Screw e Insert two 10 x 2 2 cm black screws through the footrest and e Turn the seat assembly face down into the seat bottom Tighten the screws e Insert the hinge rod through the hinge on the seat back and seat bottom as shown e Insert a 10 x 2 2 cm black screw into the hinge rod Tighten Seat Back Pin Seat Back Pin the screw e Set the seat assembly aside for Assembly step 9 Frame Leg Opening i Opening Seat Bottom Assembly e Pull the frame leg out on each frame to open Make sure it clicks into place e Turn the seat bottom assembly upright e Fit the seat back pins into the openings in the top side of the seat bottom assembly Seat Height Adjusters Frame Decorated Side Position 4 Frame Back Legs 67 ie Fy K P Back Base Hole Press Lever S a e While pressing the levers on the seat height adjusters lift them to position 4 on the frame front legs as shown Seat Assembly Screw Retainer 2 10 x 2 2 cm Black Sc
9. rew 2 7 Sockets Position a frame so that the decorated side is outward Insert the back leg of a frame into the back base Fit a screw retainer over the hole in the back base as shown Insert a 10 x 2 2 cm black screw through the screw retainer and back base Insert the back leg of a frame into the back base Tighten the screw e Repeat this procedure to attach the other frame back leg to the other side of the back base Hint The 10 x 2 2 cm black screws may have been assembled to the screw retainers Seat Bottom Tubes e Fit the seat assembly between the two frames e Insert the seat bottom tubes into the sockets in each seat height adjuster Hints e Be sure the seat height adjusters are in the same position position 4 e You may need to push the frames apart slightly to fit the seat bottom tubes into the seat height adjuster sockets Screw Retainer 2 Push Seat mmp Height Adjuster Adjuster Screw Retainers Seat Bottom Tube Ends 8 x 1 9 cm Screw 2 e Insert the frame front legs onto the front base e Push each seat height adjuster to be sure they are completely e Fit a screw retainer over a hole in the front leg on the seat bottom tubes e Insert a 10 x 7 s 2 2 cm black screw through the screw e Insert a 8 x 1 9 cm screw through each seat height adjuster retainer and front leg Tighten the screw and the ends of the seat bottom tube Tighten the screws e Repeat this procedure to secure t
10. t to position 7 the lowest position e Pull the frame release latches forward and push the rear legs toward the front legs Fisher Price Inc a subsidiary of Mattel Inc East Aurora New York 14052 U S A 2005 Mattel Inc All Rights Reserved PRINTED IN CHINA and designate U S trademarks of Mattel Inc H7182pr 0726
11. to the base tray as shown Hint Before use thorougly wash all parts the trays that may contact food Power Mode Switch e Slide the power mode switch to M Short Play 6 10 seconds MH Long Play 6 minutes O Off e Slide the volume switch to Low Volume High Volume e Insert and snap either toy tab into either slot in the tray Hint If sound becomes faint remove the batteries from the toy and Hint To remove a toy press the tab and lift the toy dispose of properly Replace the batteries with three new AA LR6 alkaline batteries e Press the buttons or turn roller for sounds and songs Adjusting the Seat WARNING Prevent serious injury or death from falls or sliding out It is recommended that the high chair be used in the upright position only by children capable of sitting upright unassisted Hint Adjust the seat height to any of seven positions To adjust the seat height e Press the levers on both seat height adjusters and lift or lower the seat to the desired height e Make sure both sides of the seat are adjusted to the same height Push the seat bottom to be sure the seat is locked in place Semi Recline Recline Hint Adjust the seat angle to any of three positions Upright Semi Recline or Recline To adjust the seat angle e Squeeze the seat back handle and push the seat back forward or pull it backwards to the desired position e Push the seat back to be
12. y 2 Teether Toys Base Tray Seat Back 10 x 2 2 cm Black Screw Hinge Rod _o Frame Seat Bottom 2 Seat Bottom Tubes 8 x 1 9 cm Screws 4 8 x 1 9 cm Screws 2 2 Screw Retainers 8 x 1 9 cm Screws 2 10 x 2 2 cm Back Base Black Screws 2 10 x 2 2 cm Black Screws 2 Footrest Screw Retainer Note Tighten and loosen all screws with a Phillips screwdriver Do not over tighten the screws o gs Front Base 10 x 2 2 cm Black Screws 2 8 x 1 9 cm Screw 8 10 x 2 2 cm Black Screw 7 Shown Actual Size IMPORTANT Before each use inspect this product for damaged hardware loose joints missing parts or sharp edges DO NOT use Plastic Rings if any parts are missing or broken Contact Mattel for replace ment parts and instructions if needed Never substitute parts Seat Bottom Tubes Plastic Rings e Slide a seat bottom tube through each set of plastic rings on the seat bottom Electronic Toy e Insert and snap the toy bar into the electronic toy Plastic Rings as shown Seat Bottom Tubes Footrest Seat Bottom e Place the seat bottom face down on a flat surface e Atan angle fit the footrest on the seat bottom as shown Plastic Rings 8 x 1 9 cm Screw 4 e Align the holes in the plastic rings and the seat bottom tubes e Insert a 8 x 1 9 cm screw through each plastic ring and into the seat bott
Download Pdf Manuals
Related Search