Fisher & Paykel DishDrawer User's Manual
Contents
1. Model Serial No Date of Purchase Purchaser Dealer Suburb Town Country This warranty applies only to product purchased in the United States of America Fisher amp feo fear 2 a Customer Lara Please keep this User Guide in a safe place Do not return to Fisher amp Paykel DishDrawer 27 customer care Before you call for service or assistance Check the things you can do yourself Refer to your User Guide and check 1 Your product is correctly installed 2 You are familiar with its normal operation If after checking these points you still need assistance please refer to the following In the USA if you need assistance If you call or write please provide name and address model For your local Fisher amp Paykel Authorized Service Agent please call number serial number date of purchase and a complete description of Toll Free 1 888 9 FNP USA 1 888 9 367 872 the problem This information is needed in order to better respond to or contact us through our web site your request for assistance Website www fisherpaykel com Installation Checklist Your installer MUST have completed and checked the following C C L a The DishDrawer is square and level The DishDrawer is fastened securely to the cabinetry Ensure moisture protection tape has been applied and the cabinet is sealed according to the Installation Instructions The DishDrawer opens and closes f2. Mode Electronic display Auto Power On Auto Power Off How to Remove the End of Wash Program Beeps Integrated Models 1 Enter the Option Adjustment Mode as explained previously 2 Press the START PAUSE button until the lights above the START PAUSE button is orange and the ECO button is red If it is not press the POWER button to return to Normal Operating Mode and Start again 3 Press the LOCK button to turn the Auto Power feature on or off If all the red lights on the wash program indicator are off then the Auto Power feature has been turned off 4 Press the POWER button to return to the Normal Operating Mode O O OO en SS EE SSD HEAVY NORMAL FAST DELICATE Rinse AUto Power On HEAVY NORMAL FAST DELICATE RINSE Auto Power Off The factory has programmed the DishDrawer to beep six times at the end of the wash program This feature can be turned off Prefinished Models 1 Enter the Option Adjustment Mode as explained previously 2 Press the START PAUSE button until the letters EC appear on the Electronic Display 3 Press the LOCK button to turn the End of Wash Program Beeps on or off as desired The brush symbol is not present on the Electronic Display when the End of Wash Program Beeps have been turned off 4 Press the POWER button to return to the Normal Operating Mode Electronic display D Beeps On C Beeps Off Integrated Models 1 Enter the Option Adjustment Mode as explained previously
3. putting in dirty dishes into the DishDrawer press the POWER button The DishDrawer will return to the Normal Operating Mode this could be used to indicate that dirty dishes are in or can be loaded into the DishDrawer NOTE We do not recommend the Clean Dish Indicator be used in conjunction with the Closed Drawer Option Prefinished Models Integrated Models 1 Enter the Option Adjustment Mode as explained previously This option is not available for Integrated Models 2 Press the START PAUSE button until letters dS appear on the Electronic Display 3 Press the LOCK button to turn the Clean Dish Indicator on or off When the Clean Dish Indicator has been turned on the brush symbol is present on the Electronic Display 4 Press the POWER button to return to the Normal Operating Mode Electronic display Clean Dish On Clean Dish Off DishDrawer 19 user maintenance instructions CLEANING THE DishDrawer From time to time the wash program indicator panel and its surrounds need to be cleaned to remove food particles hard water scale and any spillages We recommend wiping these areas with a clean damp cloth We do not recommend the Depending on the type of exterior finish on your DishDrawer we use of the following cleaning recommend the following aids on your DishDrawer as they may damage it Plastic or stainless steel scouring pads Abrasive solvent household Iridium Finish Matt Stainless Steel T
4. red If it is not press the 3 Press the LOCK button to turn the Closed Drawer Option on or off POWER button to return to the Normal Operating Mode and start again The brush symbol indicates the Closed Drawer Option is selected 3 Press the LOCK button to turn the Closed Drawer feature on or off If 4 Press the POWER button to return to the Normal Operating Mode all the red lights on the wash program indicator are on then the Closed Drawer feature is on 4 Press the POWER button to return the Normal Operating Mode Electronic display z OOO O_O lt e Closed Drawer On Closed Drawer Off HEAVY NORMAL FAST DELICATE Rinse Closed Drawer On HEAVY NORMAL FAST DELICATE RINSE Closed Drawer Off How to Install the Clean Dish Indicator Examples of where this feature might be beneficial are when dishes have been left in the DishDrawer and you cannot remember if they have been washed or in situations where household members regularly remove a few clean dishes without emptying the remaining drawer When the DishDrawer leaves the factory it is programmed with the Clean Dish Indicator off When the wash program has finished the End of Program symbol will remain on until the DishDrawer is opened Once the DishDrawer is opened it will return to the Normal Operating Mode lf the Clean Dish Indicator is chosen the End of Program symbol will remain on to indicate the dishes are clean When you have unloaded the clean dishes or
5. the possibility of slipping Keep the area around underneath your appliance free from the accumulation of combustible materials such as lint paper rags and chemicals When cleaning the underside of the filter plate care must be taken on the sharp outer edge to avoid the risk of cut type injuries Operational Under no circumstances should you open the drawer whilst the DishDrawer is in operation Always press the otart Pause button to pause and wait until you hear the three additional beeps before opening the drawer The DishDrawer must be used with the motor assembly filter plate drain filter and spray arm in place When disconnecting the appliance pull the plug rather than the power supply cord or junction of cord to avoid damage Take care when loading the DishDrawer not to load dishware items so it prevents the lid from properly sealing with the drawer Items should be placed so they do not protrude above and or forced into the drawer otherwise a service call may result It is important that the User Guide should be retained with the appliance for future reference Should the appliance be sold or transferred to another owner always ensure that the User Guide is left with the appliance in order that the new owner can become familiar with the appliance and the relevant warnings Household appliances are not intended to be played with by children Children or persons with a disability which limit
6. we do not recommend ECO programs Press the POWER Button Press the POWER button O to turn the DishDrawer on or off Opening the DishDrawer will automatically power up for 30 seconds To end the wash program in mid cycle press the POWER button Any water in the DishDrawer will be pumped out 6 Check Ensure the drain filter is flush with filter plate and the spray arm can rotate about the center easily Start Close the DishDrawer Press the START PAUSE button D ll to initiate the wash program This button also functions as the Delay Start Pause To pause the DishDrawer during its wash cycle press the START PAUSE button and wait for three beeps before opening Restart by pressing the START PAUSE button Forcing the drawer open in mid cycle may Cause damage or injury Note If the DishDrawer is operating and a power failure occurs it will stop The DishDrawer may be unable to be opened during this time When the power supply is resumed the DishDrawer will restart in the same part of the wash program Lock Button optional The Lock button Qe activates deactivates the Keylock or the Childlock functions Keylock The Keylock function disables all the buttons on the DishDrawer To activate press and hold the LOCK button until you hear one beep about 3 seconds Childlock 8 The Childlock feature locks the DishDrawer and disables all the buttons To activate press and
7. 2 Press the START PAUSE button until the lights above the START PAUSE button is green and the ECO button is red If it is not press the POWER button to start again 3 Press the LOCK button to turn the End of Wash Program Beeps on or off as desired The End of Wash Program Beeps have been turned off if all the red lights on the wash program indicator are off 4 Press the POWER button to return to the Normal Operating Mode O OOOO lS 0 ff HEAVY NORMAL FAST DELICATE RINSE B eep S On HEAVY NORMAL FAST DELICATE RINSE B ep S 0 option adjustment mode How to Install the Closed Drawer Option When the Closed Drawer Option has been selected it will keep the DishDrawer locked at all times When you wish to open the DishDrawer press the POWER button When the DishDrawer is fully closed again the lid will automatically come down after 30 seconds and lock the DishDrawer NOTE If the Lock feature is used in conjunction with the Closed Drawer Option pressing the POWER button will not open the DishDrawer The Lock feature must be turned off to enable the DishDrawer to be opened Prefinished Models Integrated Models 1 Enter the Option Adjustment Mode as explained previously 1 Enter in the Option Adjustment Mode as explained previously 2 Press the START PAUSE button until the letters Ld appear on the 2 Press the START PAUSE button until the lights above the Electronic Display START PAUSE button and the ECO button Is
8. EAVY NORMAL FAST DELICATE Rinse EXAMple of the Water Softener set to 4 option adjustment mode Prefinished and Integrated Models 1 Press the POWER button to turn the DishDrawer to the Normal Operating Mode 2 Press and hold the ECO and LOCK buttons for 5 seconds When the buttons have been correctly pressed one long beep is emitted 3 Release the LOCK and ECO buttons 4 Use the appropriate buttons on the control panel to make the necessary adjustments These are explained below 5 Once the changes have been made press the POWER button to return to the Normal Operating Mode The DishDrawer will save these changes automatically Integrated Models 1 Enter the Option Adjustment Mode as explained previously The light above the START PAUSE button is red to indicate this setting has been chosen 2 The current rinse agent setting is shown on the wash program indicator in red lights If four red lights are lit on the wash program indicator then the rinse agent setting is at four 3 Press the LOCK button to increase or decrease the rinse agent setting the red lights will scroll up to 5 and then start from 1 again 4 Once you have selected the desired rinse agent setting press the POWER button to return to the Normal Operating Mode O_o i HEAVY NORMAL FAST DELICATE Rinse EXample of Rinse Agent set to 4 Integrated Models 1 Enter the Option Adjustment Mode as explained previously 2 Press the START PAUSE button
9. F sher amp Paykel DishDrawer USER GUIDE contents Introduction 2 Operating Instructions Prefinished Model 4 Operating Instructions Integrated Model 6 Accessories 8 Basket Cup racks Drain filter access panel Mega rack Plate insert Cutlery basket Loading 9 Examples of how we recommend you load your DishDrawer Examples of how not to load your DishDrawer Dispensers 10 Detergent dispenser Filling the detergent dispenser Detergent quantities Rinse agent dispenser Filling the rinse agent dispenser Water Softener 12 Dinnerware Care 14 Caring for your dinnerware Vacation Time Wash Programs 15 Wash descriptions for Rinse Heavy Normal Fast Delicate Standard amp Eco programs Dishwasher Standards Test 16 Option Adjustment Mode 17 How to enter Option Adjustment Mode How to change the Rinse Agent Setting Water Softener Setting Auto Power Option End of Wash Program Beeps Closed Drawer Option and the Clean Dish Indicator Option User Maintenance Instructions 20 Cleaning the DishDrawer Cleaning the drain filter spray arm and filter plate Trouble Shooting 22 Problem solver chart Possible causes What to do Fault codes 24 How to recognize a fault code How to attend to a fault code Fault code chart Important Safety Information 25 Fisher amp Paykel SmartCare Manufacturer s Warranty 21 Customer Care 28 Installation Checklist 29 big e a Me Gi user guide PREFINISHED
10. al 1 2 Delicate 1 Fast 1 tsp teaspoon 1 tsp 5g No detergent is required in pre wash compartment for the fast wash We highly recommend the regular use of liquid rinse agent to give the best drying results Rinse agent gives a streak free sparkling clean look to glass and chinaware in addition it prevents metal from tarnishing The rinse agent dispenser is on the inside of the drawer located underneath the detergent dispenser The dispenser holds approximately 1 7 fl oz of rinse agent How Much Rinse Agent to Use The regulator may need adjusting to suit your water conditions The lowest setting Is 1 and the highest is 5 Refer to Option Adjustment Mode section to adjust the rinse agent setting If there is excessive foam at the end of the wash reduce the setting If dishes are wet or streaky after drying increase the setting Rinse Agent Indicator Light If the rinse agent indicator light is red refill the dispenser If the rinse agent indicator light is not lit there is enough rinse agent for the wash Soft Water Situations Filling the Rinse Agent Dispenser 1 Turn the plug counter clockwise and remove 2 Pour the rinse agent into the circular opening 3 Take care not to spill rinse agent into the DishDrawer Any spillages must be wiped up to prevent excess foaming Failure to wipe rinse agent spillages may result in a service call which will not be covered by warranty 4 Fit the pl
11. alt in the water softener DD603H and DS603H models only What to Do Connect the power supply Ensure the drawer is firmly closed Turn the Lock off Hold down the LOCK button until the lock symbol prefinished models or the green light integrated models disappears Press the START PAUSE button Straighten the drain hose s Clean the filter plate drain filter Unblock the drain hose s Refer to the user maintenance section Ensure there is enough rinse agent in the dispenser Increase the rinse agent setting Refer to the section on loading Ensure there is enough salt in the water softener and or increase the water softener setting Refer to the wash programs section for a suitable wash program or the soils were too heavily baked on and dishes may need soaking Ensure no items are obstructing the spray arm path Refer to the section on loading Refer to the user maintenance section Detergent must be placed in the large compartment Scrape all food scaps off dinnerware prior to loading Use recommended brands of dishwasher detergent Refer to the detergent section or the detergent manufacturer s instructions Clean the spray arm Clean the filter plate and drain filter Refer to the accessories section for correct installation Ensure there is enough salt in the water softener and you may need to increase the water softener setting if the problem per
12. amp INTEGRATED MODELS PREFINISHED DD603 White Brushed stainless steel Iridium stainless steel and Black INTEGRATED DD603 DishDrawer Introduction Thank you and congratulations for purchasing your Fisher amp Paykel DishDrawer The DishDrawer is unique and offers benefits no other dishwasher can The DishDrawer utilizes the efficiency and easy access of the everyday kitchen drawer and turns it into the most advanced dishwasher in the world This booklet will guide you through the operating instructions and features of your DishDrawer We recommend that you read this User Guide thoroughly before you start using your DishDrawer for the sake of safety as well as SUCCESS special talents The drawers of the DishDrawer are totally independent of each other An interchangeable and easy to remove rack system to suit your daily needs and a deeper drawer design to accommodate 12 large dinner plates up to 11 7 16 in diameter The DishDrawer minimizes water and energy consumption with each drawer using less than half the water of a conventional dishwasher Combining this with the precise markings inside the detergent dispenser you will never use too much or too little detergent for each program allowing you to be guilt free when washing even the smallest load Used cleverly the double DishDrawer can even provide extra kitchen storage DishDrawer operating instructions prefinished mo
13. appeared on the continuous beeps cannot be 5 If the fault code and DishDrawer This information removed by pressing the POWER O continuous beeps remain turn will help the Authorized Service button turn the power off at the the water and power supply off Center respond better to your power supply to the DishDrawer request 3 We recommend you check the chart below and correct the fault where possible Possible Causes What to Do Prefinished Models Integrated Models a a J a a a HEAVY NORMAL FAST DELICATE RINSE a m gt HEAVY NORMAL FAST DELICATE RINSE Flood switch has e gt been activated HEAVY NORMAL FAST DELICATE RINSE Motor problem SS ESOS SS D HEAVY NORMAL FAST DELICATE RINSE Temperature sensor e M HEAVY NORMAL FAST DELICATE RINSE failed Faulty temperature sensor or element Electronics malfunction Fill Fault _ M HEAVY NORMAL FAST DELICATE RINSE Turn the water and power supply to the DishDrawer off and call your Fisher amp Paykel Authorized Service Center Call your Fisher amp Paykel Authorized Service Center Ensure water coming in through the inlet hose is not hotter than 149 F You may need to install a tempering valve on your water supply Call your Fisher amp Paykel Authorized Service Center Call your Fisher amp Paykel Authorized Service Center Turn the DishDrawer w
14. ash 140 F main wash 125 F main wash 105 F main wash 115 F post rinse 1 post rinse post rinse post rinse post rinse 2 final rinse 150 F final rinse 125 F final rinse 105 F final rinse 125 F drying phase drying phase drying phase Note Wash times can vary depending on the incoming water temperature ambient conditions type of dish load and whether the drawer has been opened during the wash Wash times are only APPROXIMATE on the Electronic Display and based on 120 F incoming water DishDrawer 15 a c SU B bol1d Yysem dishwasher standards test Fisher amp Paykel DishDrawer s are tested to various standards for both wash and dry performance The following are loading pattern diagrams detergent and rinse agent quantities used for the DishDrawer Detergent Quantities 5g pre wash for soft water situations only 10g main wash Rinse Agent Setting 4 Water Softener Setting Adjust the water softener to match the water hardness Refer to the water softener and for DD603H and DS603H models only option adjustment mode section of the User Guide Recommended Loading Pattern Top Drawer Bottom Drawer HOW TO ENTER OPTION ADJUSTMENT MODE After using the DishDrawer you may want to change some of the preset options to suit your needs The settings for Rinse Agent Water softener Auto Power End of Wash Program Beeps Closed Drawer and Clean Dish Indicator options can be changed How to Adjust the Rinse A
15. ater supply on Ensure the spray arm can rotate about the center and if the DishDrawer is full of water it will need to be emptied manually If you have any questions about operating the product please contact our Fisher amp Paykel Customer Care Center important safety information save these instructions WARNING When using your DishDrawer follow basic precautions including the following Please read all instructions before operating the DishDrawer For your safety the information in this manual must be followed to minimize the risk of fire or explosion or to prevent property damage personal injury or loss of life Use the DishDrawer only for its intended function as described in this User Guide Use only detergents or rinse agent recommended for use in a domestic dishwasher and keep them out of reach of children Check that the detergent dispenser is empty after the completion of each wash program When loading items to be washed locate sharp items so that they are not likely to damage the lid seal and load sharp knives with the handles up to reduce the risk of cut type injuries Do not touch the heater plate during or immediately after use Do not operate your DishDrawer unless all the enclosure panels are properly in place Do not tamper with the controls Do not abuse sit on stand in or on the drawer or dish rack of the DishDrawer The cup racks are designed to Supp
16. awer as it may will not reach some of the through prevent the lid from properly sealing which dinnerware could result in a service call Ensure cutlery are not nesting or Cups glasses and bowls must stuck together They need to be Locate sharp items to prevent injuring the user and have their openings facing evenly spread out damaging the lid assembly downwards Check the bottom of the cutlery basket to ensure sharp or pointed items have not come through as they may stop spray arm rotation Ensure cutlery has not fallen through and stopped the spray arm from rotating The large bowl is blocking wash water reaching the cup racks Large utensils should be on cup racks so they do not become dislodged and stop the spray arm from rotating DishDrawer S0110SSa99282 pue bu rpeoj detergent dispenser The detergent and rinse agent dispenser is located on the inside of the DishDrawer The detergent dispenser has two compartments the pre wash compartment is the smaller and the other is for the main wash detergent The pre wash and main wash compartments both have markings on the inside The pre wash compartment has one marking which represents 1 tsp when it is full it holds 2 tsp The main wash compartment has two markings the lowest mark indicates 2 tsp the middle mark 4 tsp and when full it contains 6 tsp v X YS Re POWDER ONLY liquid tablets The detergent dispenser is designed for use with powdered deterg
17. correct position The filter plate must not be able to move about freely Correct Locking Position of Filter Plate with Motor Assembly Impeller Center Ring Outer Ring WARNING The DishDrawer must be used with the filter plate drain filter and spray arm correctly in place DishDrawer 21 irouble shooting If the DishDrawer does not appear to be operating properly check this chart below and correct where possible Problem DishDrawer will not start Excess water in the DishDrawer Water marks on the dishes Unclean dishes Possible Causes Power supply is not connected The drawer is not properly closed Lock feature is on START PAUSE button not pressed Drain hose s bent or kinked Blocked filters and or drain hose s Insufficient rinse agent Rinse agent setting too low DishDrawer overloaded incorrectly loaded Insufficient or no salt in the water softener DD603H and DS603H models only Wash program unsuitable for the load Spray arm unable to rotate DishDrawer overloaded incorrectly loaded Filter plate drain filter is incorrectly inserted Detergent put in the wrong compartment Excessive food not removed from dinnerware prior to cleaning Unsuitable detergent Not enough detergent Spray arm holes are blocked Filter plate drain filter is blocked Mega rack incorrectly installed Insufficient s
18. del f you have a double DishDrawer each DishDrawer has its own control panel and can run independently of the other 1 2 Load Dishes Add Detergent amp Rinse Aid Remove all food scraps and load the dishes 4 Select Wash Program Press the PROGRAM button DB to select the desired wash The DishDrawer wil remember the last program used gt HEAVY NORMAL FAST DELICATE RINSE Progress of the wash program As the wash program advances through the cycle the following symbols will be highlighted in the Electronic Display to indicate the progression DVD a D D a DIRTY PRE WASH MAIN WASH POST RINSE DRYING CLEAN Electronic Display The Electronic Display shows progress through a wash program and time remaining When the wash program has started the Electronic Display will countdown in one minute increments 3 Press the POWER Button Press the POWER button O to turn the DishDrawer on or off Opening the DishDrawer will automatically power up for 30 seconds To end the wash program in mid cycle press the POWER button Any water in the DishDrawer will be pumped out 5 ECO Button optional Press the ECO button 7 if you would like the wash program to use less energy and time The red ECO light will indicate the feature is on f your dishes are heavily soiled or you require enhanced dry performance we do not recommend ECO programs 6 Check Ensure the drain filt
19. e drawer Is closed Lock Button optional The Lock button f activates deactivates the Keylock or the Childlock functions Keylock The Keylock function disables all the buttons on the DishDrawer To activate press and hold the LOCK button until you hear one beep about 3 seconds Childlock The Childlock feature locks the DishDrawer and disables all the buttons To activate press and hold the LOCK button until you hear two beeps about 5 seconds To cancel Keylock or Childlock press and hold the LOCK button until you hear one beep and the Lock symbol disappears from the electronic display To cancel Delay Start press the POWER button or hold the START PAUSE button until the delay symbol disappears DishDrawer operating instructions integrated model If you have a double DishDrawer each DishDrawer has its own control panel and can run independently of the other 1 Load Dishes Remove all food scraps and load the dishes 4 Select Wash Program Press the PROGRAM button bp to select the desired wash The DishDrawer will remember the last program used 2 Add Detergent amp Rinse Aid HEAVY NORMAL FAST DELICATE RINSE 3 ECO Button optional Press the ECO button S if you would like the wash program to use less energy and time The red ECO light will indicate the feature is on f your dishes are heavily soiled or you require enhanced dry performance
20. e salt reservoir indicator light is red How to Fill the Salt Reservoir 1 Open the DishDrawer 2 Unscrew the salt reservoir plug by turning counter clockwise 3 Place the salt into the salt container and pour the contents into the salt reservoir The salt reservoir can hold up to approximately 1lb of salt 4 Fit the cap tightly back into its original position 5 f you do not wash your dishes immediately after filling the salt reservoir run a rinse program to remove any salt water or spilt granules Note When filling the salt dispenser you may notice water being displaced from the water softener overflow Salt Indicator Light If the salt indicator light is red the salt reservoir is empty If the salt indicator light is black there is enough salt in the reservoir for the wash program that has been selected Prefinished Models The electronic display will also indicate when the salt reservoir is empty by displaying the salt S symbol WARNING Do not pour detergent or rinse agent into the salt reservoir Detergent and rinse agent will destroy the water softener SALT ONLY x 2 detergent o rinse aid DishDrawer 13 caring for your dinnerware The combination of high temperatures and dishwasher detergent may cause damage to some items if they are washed in the DishDrawer Remember if in any doubt about any aspect concerning items washed in the DishDrawer follow the instructions from the ma
21. end first so that you do not knock the detergent and rinse agent dispenser 2 Lift the spray arm and shake any foreign material out Cleaning the Drain Filter 1 Lift up the drain filter access panel if fitted on the basket 3 Rinse the spray arm under water and wipe the spray arm 2 Lift and remove the drain filter with a damp cloth out of the DishDrawer 4 Replace the spray arm back 3 Empty rinse under clean onto the impeller running water and replace back into the allocated space 4 Ensure the drain filter is flush with the filter plate Cleaning the Filter Plate 1 Ensure the DishDrawer is cool before you start cleaning and follow the instructions for removing the drain filter and spray arm 2 In the center of the filter plate there are two rings Hold the center ring still and turn the outer ring counter clockwise about a 1 8 turn This will release the filter plate 3 When cleaning the underside of the filter plate care must be taken on the sharp outer edge to avoid the risk of cut type injuries 4 Remove any soil wash in hot soapy water and rinse thoroughly in clean water The heater plate can be wiped with a damp cloth 5 Replace the filter plate so it lies flat in the base of the DishDrawer ensuring the filter plate is fully locked into position with the center ring 6 To lock the filter plate into position ensure the lines align with each other refer to the diagram for the
22. ent Liquid and tablet detergents are not suitable to be used in the DishDrawer Filling the Detergent Dispenser open detergent dispenser 1 Press the latch down and the door will open a Pre Wash Compartment b Main Wash Compartment c Salt Indicator Light d Salt Reservoir Cap 2 Pour in detergent No detergent is needed for the Rinse program D l e Detergent Dispenser Latch 3 After filling the compartment s close the dispenser door until it clicks shut The detergent will automatically be released into the DishDrawer during the wash f Rinse Agent Indicator Light g Rinse Agent Plug program C e d IMPORTANT Only use powdered detergent f recommended for domestic automatic dishwashers Hand g washing liquids soap laundry detergents or disinfectants will damage the DishDrawer Never sprinkle or pour detergent directly onto any item in the DishDrawer raced bien peak su ies WARNING Detergent Quantities Dishwasher detergents are strongly alkaline They The detergent quantities suggested below are for individual can be dangerous if swallowed Avoid contact DishDrawer with skin and eyes Keep children and infirm person s away from the DishDrawer when the Water Type Wash Program Detergent Quantities drawer is open pre wash tsp main wash tsp Hard All 2 6 gt 150ppm or gt 9gpg Medium All 2 4 100 150ppm or 6 9gpg Soft Heavy 1 3 lt 100ppm or lt 6gpg Norm
23. er is flush with filter plate and the spray arm can rotate about the center easily Start Close the DishDrawer Press the START PAUSE button D ll to initiate the wash program This button also functions as the Delay Start Pause To pause the DishDrawer during its wash cycle press the START PAUSE button and wait for three beeps before opening Restart by pressing the START PAUSE button Forcing the drawer open while in mid cycle may cause damage or Injury DELAY START MODE optional 8 Finish The DishDrawer will beep six times to indicate the end of the wash program At the end of the wash program the drying fan will continue to run for a set time or until the drawer is opened The fan assists with drying and uses negligible amounts of energy It is normal for some water to remain in the drain filter area after the wash program is complete Note If the DishDrawer is operating and a power failure occurs it will stop The DishDrawer may be unable to be opened during this time When the power supply is resumed the DishDrawer will restart in the same part of the wash program The start of the wash program can be delayed from 1 to 12 hours To activate Delay Start 1 Press and hold the START PAUSE button until the delay symbol G appears on the Electronic Display 2 Continue until the desired delay time has been reached 3 The DishDrawer will start once the delay time has elapsed and th
24. gent Setting Prefinished Models 1 Enter the Option Adjustment Mode as explained previously The letters rA will be shown on the Electronic Display 2 The current rinse aid setting is shown on the wash program indicator in red lights If four red lights are lit on the wash program indicator then the rinse agent setting is at four 3 Press the LOCK button to increase or decrease the rinse agent setting the red lights will scroll up to 5 and then start from 1 again 4 Once you have selected the desired rinse agent setting press the POWER button to return to the Normal Operating Mode Electronic display O e 2 HEAVY NORMAL FAST DELICATE Rinse EXample of Rinse Agent set to 4 How to Adjust the Water Softener Setting for models DD603H and DS603H only Prefinished Models 1 Enter the Option Adjustment Mode as explained previously 2 Press the START PAUSE button until the letters hd appear on the electronic display The current water softener setting is shown on the wash program indicator in red lights If four red lights are lit then the water softener setting is at four 3 Press the LOCK button to increase or decrease the water softener setting For example if the water hardness is 500ppm the number of lights that are lit should be four 4 Once you have selected the desired water softener setting press the POWER button to return to the Normal Operating Mode Electronic display OOO O H
25. his new easy clean surface requires only a mild dishwash detergent and warm water Take care not to wet the control panel Dry with a clean lint free cloth cleaners DO NOT use proprietary Stainless Steel type cleaners or polishes as Acid or alkaline cleaners these may damage the protective coating Hand washing liquids or soap WARNING Laundry detergents or Never use abrasive cleaners or harsh solvents as these will disinfectants damage the Iridium surface Stainless Steel Finish Brushed Stainless To clean the brushed stainless surface doors stainless steel cleaners can be used Alternatively wipe the doors with a clean damp cloth Dry with a lint free cloth White or Black Finish To clean the doors wipe the doors with a damp clean cloth Dry with a lint free cloth f a dishwasher cleaner descaler is used you must run a wash program with detergent immediately afterward to prevent any damage to the DishDrawer Spray Arm Filter Plate Drain Filter Internal Parts of the DishDrawer Cleaning the Drain Filter Spray Arm and Filter Plate We recommend the drain filter to be cleaned whenever there is evidence of food particles The filter plate is designed to be self cleaning but food scraps may accumulate The spray arm and filter plate may need cleaning about once a month in normal use or more often should the need arise Cleaning the Spray Arm 1 Remove the basket carefully Lift from the back
26. hold the LOCK button until you hear two beeps about 5 seconds Finish The DishDrawer will beep six times to indicate the end of the wash program At the end of the To cancel Keylock or Childlock press and hold the wash program the drying fan will LOCK button until the green light above the LOCK continue to run for a set time or button disappears until the drawer is opened The fan assists with drying and uses negligible amounts of energy It is normal for some water to remain in the drain filter area after the wash program is complete DELAY START MODE optional The start of the wash program can be delayed from 1 to 12 hours To activate Delay Start 1 Press and hold the START PAUSE button until the light above the START PAUSE button turns orange 2 The DishDrawer will emit a beep as you hold down the START PAUSE button each beep indicates another hour delay Continue holding the START PAUSE button until the desired delay time is reached 3 The DishDrawer will start once the delay time has elapsed and the drawer Is closed To cancel Delay Start press the POWER button or hold the START PAUSE button until the light turns green DishDrawer accessories The inserts and racks can be added or removed to suit your individual needs If you have the double DishDrawer model some of the accessories are interchangeable between the two drawers For example you can combine the two Mega Racks int
27. ishwasher water softening systems We do not recommend the use using a Salt solution The amount of salt required will depend of cooking salt like table or rock salt or pellets as they may contain on the local water hardness Your local water company will be impurities that will impair or diminish the life of the water softener able to provide you with the information on the water hardness in your local area SETTING UP THE WATER SOFTENER Determine the Water Hardness in Your Local Area Identify the setting you require for your DishDrawer from the water hardness table below For example if your water hardness is 500ppm then the water softener setting on your DishDrawer should be four Refer to the Option Adjustment Mode to adjust the water softener so that the setting corresponds to your water hardness DishDrawer setting Grains per Gallon gpg Parts per Million ppm 0 0 6 0 100 1 6 14 100 250 Z 14 20 250 350 3 20 26 350 450 4 26 32 450 550 5 32 36 550 625 Note f your water hardness is above 625ppm we highly recommend you completely fill the detergent compartment for all programs except Rinse and the rinse agent setting be at 5 f your water hardness is above 625ppm the performance of your DishDrawer will decline The Salt Reservoir Water softening can only take place when there is salt in the reservoir The salt reservoir must be filled prior to using the DishDrawer and whenever th
28. it extracts mineral ions directly from the glass Etching looks like rainbow colored film as the glass is subjected to further washing the surface will eventually appear opaque This type of etching is irreversible To prevent further etching from occurring on glassware use less detergent follow the recommended detergent quantities in the User Guide for soft water situations and ensure the dishwasher is not overloaded so water can reach all the dishes during the wash DishDrawer rinse agent dispenser 11 Juab ajap zyuabe 9sSsul1 149U9 7J0S 9jJEM water softener for models DD603H and DS603H Soft water is required for dishwashing to prevent the build up of scale lime deposits on your dishes and in your DishDrawer If hard water is used for dishwashing you will notice glasses will become opaque dishes will become spotted or have a white film on them and your dishwasher will become less efficient over a period of time Tap water above 100ppm must be softened for dishwashing for optimum wash performance DishDrawer models DD603H and DS603H are fitted with a To Ensure Optimum Performance of the Water Softener water softener which is designed to remove the calcium and The water softener must be set to the correct local water hardness magnesium ions that cause water to be hard The water and must always be filled with granular salt made especially for softener will automatically remove the hardness from the water d
29. ll with water or fall through the by hand basket during the wash Glued Items Certain adhesives are softened or dissolved in machine washing If in doubt wash glued items by hand VACATION TIME f the DishDrawer is not going to be used for some time we recommend you ensure the baskets are empty Leave the inside of the DishDrawer clean Leave the drawers ajar to allow air to circulate Turn off both the power and water supply to the DishDrawer wash programs gt gt STANDARD PROGRAM when to use Heavy HEAVY Normal NORMAL Fast Fast Delicate DELICATE Rinse RINSE Heavily soiled pots pans Dishes with normal soils Lightly soiled dishes Lightly soiled amp heat To prevent odors amp soll amp dishes for optimum wash amp dry sensitive crockery drying on dishes performance pre wash 1 pre wash 1 pre wash pre wash pre wash pre wash 2 pre wash 2 pre wash 3 main wash 150 F main wash 140 F main wash 115 F main wash 120 F post rinse 1 post rinse post rinse post rinse post rinse 2 final rinse 165 F final rinse 150 F final rinse 115 F final rinse 130 F drying phase drying phase drying phase ECO PROGRAM when to use Heavy HEAVY PA Normal norma PA Fast FAST PA Delicate DELicare PA Heavily soiled everyday Normal soiled dishes for Lightly soiled non Non greasy lightly soiled dishes optimum energy use greasy dishes amp heat sensitive crockery pre wash 1 pre wash pre wash pre wash 2 main w
30. nsils can be placed on the left and right hand side of the cup racks For best performance ensure there are no large items below blocking the wash water from reaching the cup racks Wine glasses can be supported on the cup racks if used in conjunction with the Mega Rack There are stops on the cup rack to prevent cups from touching the DishDrawer wall This will help improve the dry and wash performance How to install the Mega Rack To install the Mega rack place the outer legs of the rack on top of the basket and clip the Mega rack to the side of the basket When the Mega rack is correctly installed it should not feel loose in the basket The wash water for the DishDrawer comes from the spray arm which is situated at the base of the dishwasher The spray arm rotates providing wash water to all areas of the DishDrawer so care needs to be taken when loading the DishDrawer Ensure that there is sufficient space and room for the water to reach all areas particularly the cup racks If there are any items blocking the spray arm path or wash water then the performance will be ineffective WA HOW TO LOAD YOUR DishDrawer Please note that the basket and its inserts are not designed to be lifted out of the DishDrawer while loaded with dishes The DishDrawer is The plates are nesting together Ensure dishware items are not forced into or overcrowded and wash water and wash water may not get protrude above the DishDr
31. nt to the pre rinse compartment Decrease the rinse agent setting Clean the dispenser and ensure the dispenser is dry when adding detergent Refer to the user maintenance section for details on correct placement gt Run the DishDrawer through a wash program Reconnect the drain hose to the waste pipe Ensure the inlet hose is connected securely Turn water and power supplies to the DishDrawer off Call your Fisher amp Paykel dealer or Authorized service Agent Turn Lock off Hold down the LOCK button until the lock symbol prefinished models or the green light integrated models disappears and or press the POWER button to open the DishDrawer Close the DishDrawer and press the START PAUSE button Refer to the fault codes section DishDrawer 23 How to Recognize a Fault Code When a fault has occurred the DishDrawer will continuously beep every second The fault code will be displayed on the Electronic Display for prefinished and on the inside control panel for integrated models Each fault code is shown in the chart below for prefinished and integrated models Fault Codes How to Attend to a Fault Code 1 Press the POWER button to 4 After attending to the fault 6 When calling your Fisher amp remove the fault code turn the DishDrawer on at the Paykel Authorized Service Center power supply advise them of the fault code 2 If the fault code and that has
32. nufacturer of the items or wash the item by hand Cutlery amp Silverware All cutlery and silverware should be rinsed immediately after use to prevent tarnishing caused by some foods The Rinse wash program is useful for this Silver items should not come into contact with stainless steel for example other cutlery Mixing these items can cause staining Remove silver cutlery from the DishDrawer and hand dry it immediately after the program has finished Aluminium Aluminium can be dulled by Dishwasher detergent The degree of change depends on the quality of the product Other Metals ron and cast iron objects can rust and stain other items Copper pewter and brass tend to stain Woodware Wooden items are generally sensitive to heat and water Regular use in the Dishwasher may cause deterioration over time f in doubt wash by hand Glassware Most everyday glassware is dishwasher safe Crystal very fine and antique glassware may etch i e become opaque You may prefer to wash these items by hand Decorated Items Plastic Most modern china patterns are some plastic may change shape Dishwasher safe Antique items or color with hot water Check those with a pattern painted manufacturer s instructions about over the glaze gold rims or hand washing plastic items Washable painted china may be more plastic items should be weighed sensitive to machine washing If down so they do not flip over and in doubt wash these items fi
33. o one drawer and wash all cups and glasses leaving the other drawer for plates and larger items a Basket The basket holds some of the accessories in place and keeps the dishes above the spray arm Without the inserts large bowls and pots can be placed flat b Drain Filter Access Panel The drain filter access panel is designed to snap onto the basket over the drain filter This prevents objects from touching the base of the DishDrawer and stopping the rotation of the spray arm while still giving access to the drain filter c Mega Rack The Mega rack is designed to hold glasses cups and small plates d Plate Insert The plate insert supports plates and bowls Cutlery Basket Cutlery small kitchen utensils and some plastic lids are best placed into the cutlery basket For best wash performance we recommend loading cutlery with handles pointing down and sharp utensils with their handles facing up to reduce the risk of injury Mix spoons knives and forks within each section to stop cutlery nesting together and to ensure the water circulates freely Keep stainless steel from touching silver cutlery to avoid staining Use the oval slots spoon rack for spoons and teaspoons Small items like plastic lids can be placed under the spoon rack this will prevent them from being displaced by wash water and falling to the bottom where they may stop the spray arm rotation Cup Racks Cups glasses and kitchen ute
34. ort cups glasses and kitchen utensils When the cup racks are in the DishDrawer do not lean on or use the cup racks to support your body weight To reduce the risk of injury do not allow children to play in or on the DishDrawer Under certain conditions hydrogen gas may be produced ina hot water heater system that has not been used for two weeks or more HYDROGEN GAS IS EXPLOSIVE If the hot water system has not been used for such a period before using the dishwasher turn on all hot water taps and let the water flow from each for several minutes This will release any accumulated hydrogen gas As gas is flammable do not smoke or use an open flame during this time Remove the door to the washing compartment when removing an old dishwasher from service or discarding It Dishwasher detergents are alkaline They can be dangerous if swallowed Avoid contact with skin and eyes keep children and infirm person s away from the dishwasher when the drawer is opened Installation This DishDrawer must be installed and located in accordance with the Installation Instructions before it is used If you did not receive Installation Instruction sheets with your DishDrawer you can order them by calling your Fisher amp Paykel Authorized service Agent or our Customer Care Center Installation and service must be performed by a qualified technician lf the power supply cord is damaged it must be replaced by a Fi
35. reely The DishDrawer must be free to close completely with no resistance from cabinetry For the integrated models check the 8mm air gap has been achieved in the correct place The power supply is connected and switched on The inlet water hose is connected and turned on There should be no leaks E a The drain hose s are connected and there are no leaks There must be no kinks or obstructions in the drain hose s The spray arm is in the center and can freely rotate The rinse program has been run The water level will be below the stainless steel filter plate at the end of the wash program It is normal to find some water in the drain filter area Set the water softener to the correct water hardness for your area DD603H and DS603H models only The installer is responsible for the DishDrawer installation Incorrect installation is not covered by warranty DishDrawer 29 Copyright Reserved Fisher amp Paykel 2003 The product specifications in this booklet apply to the specific products and models described at the date of issue Under our policy of continuous product improvement these specifications may change at any time You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available USA Customer Care 1 888 9 FNP USA 1 888 9 367 872 www fisherpaykel com date of issue March 2003 part number 526985 B USA
36. s their ability to use the appliance should have a responsible person instruct them in Its use The instructor should be satisfied that they can then use the appliance without danger to themselves or their Surroundings Close supervision is necessary if this appliance Is used by or near children Do not allow children to play inside on or with this appliance or any discarded appliance If a Dishwasher cleaner is used we would strongly recommend a wash program with detergent should be run immediately afterward to prevent any damage to the DishDrawer The DishDrawer is designed for washing normal household utensils Items that are contaminated by petrol paint Steel or iron debris corrosive acidic or alkaline chemicals are not to be washed in the DishDrawer If the DishDrawer is not being used for long periods of time turn the electricity and water supply to the DishDrawer off Do not pour detergent or rinse agent into the salt reservoir The detergent or rinse agent will destroy the water softener DD603H and DS603H models only When you purchase any new Fisher amp Paykel whiteware Product you automatically receive a 2 year Manufacturer s Warranty covering parts and labor for servicing within the 48 mainland states Hawaii and Washington DC FISHER amp PAYKEL UNDERTAKES TO Repair or at its option replace without cost to the owner either for material or labor any part of the Product
37. sher amp Paykel Dealer or Authorized Service Center or a similar qualified trades person in order to avoid a hazard Ensure the DishDrawer is secured to adjacent cabinetry using the brackets provided Failure to do so may result in an unstable product which may Cause damage or injury Do not operate this appliance if it is damaged malfunctioning partially disassembled or has missing or broken parts including a damaged power supply cord or plug Do not store or use petrol or other flammable vapours and liquids in the vicinity of the DishDrawer Connect to a properly rated protected and sized power Supply circuit to avoid electrical overload Make sure that the power supply cord is located so that it will not be stepped on tripped over or otherwise subject to damage or stress Do not install or store the DishDrawer where it will be exposed to temperatures below freezing or exposed to weather Do not use an extension cord or a portable electrical outlet device e g multi socket outlet box to connect the DishDrawer to the power Supply DishDrawer 23 important safety information save these instructions Maintenance Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this User Guide We recommend that you call a Fisher amp Paykel Authorized service Agent Keep the floor around your appliance clean and dry to reduce
38. sists Problem DishDrawer interior is stained Dishes did not dry Foaming No detergent dispensed Excessive motor noise Water leaking DishDrawer will not open Intermittent beeping Continuous beeping Possible Causes Some foods like tomato based products may stain the inside of the DishDrawer Incorrect loading Rinse agent depleted Rinse agent setting too low Eco wash program used Incorrect amount of detergent Too much egg in the wash load Rinse agent setting too high Detergent was wet when loaded The filter plate and or spray arm is incorrectly placed No water in the motor area This usually occurs on the first use or when the DishDrawer has not been used for long periods of time Drain hose disconnected from waste pipe Supply inlet hose not properly connected Other leaks Childlock function is on or the Closed Drawer option is on or both DishDrawer is in pause mode A fault has occured What to Do Pre rinse dishes before placing in the DishDrawer Alternatively using the Rinse program after adding the dishes may minimize staining Ensure the dishes are not nesting together Refill the rinse agent dispenser Increase the rinse agent setting Choose a standard wash program PU Ul Refer to the detergent section or consult the detergent manufacturer s instructions Add deterge
39. the serial number of which appears on the Product which is found to be defective within TWO YEARS of the date of purchase This warranty DOES NOT cover A Service calls to which are not related to any defect in the Product The cost of a service call will be charged if the problem is not found to be a Product fault For example 1 Correct the installation of the Product 2 Instruct you how to use the Product 3 Replace house fuses or correct house wiring or plumbing 4 Correcting fault s caused by the user 5 Noise or vibration that is considered normal e g drain sounds regeneration noises or user warning beeps 6 Correcting damage caused by pests e g rats cockroaches etc B Defects caused by factors other than 1 Normal domestic use or 2 Use in accordance with the Product s User Guide C Defects to the Product caused by accident neglect misuse or Act of God D The cost of repairs carried out by non authorized repairers or the cost of correcting such unauthorized repairs E Normal recommended maintenance as set out in the Product s User Guide SERVICE UNDER THIS MANUFACTURER S WARRANTY MUST BE PROVIDED BY FISHER amp PAYKEL SUCH SERVICE SHALL BE PROVIDED DURING NORMAL BUSINESS HOURS THIS WARRANTY CERTIFICATE SHOULD BE SHOWN WHEN MAKING ANY CLAIM Note This Warranty is an extra benefit and does not affect your legal rights fisher amp paykel manufacturer s warranty PRODUCT DETAILS Fisher amp Paykel Ltd
40. ug back into the original position Hard Water Situations If you live in a hard water situation we recommend the installation of a household water softener to improve the water quality detergent effectiveness and prevent the build up of calcium deposits on dishes and in the DishDrawer Certain brands of dishwasher detergent contain varying quantities of phosphates which help soften water We suggest you use a detergent with high phosphate content to improve the wash The detergent compartments need to be completely FULL and rinse agent Is used with its setting fixed at 5 We recommend the use of a dishwasher cleaner descaler whenever you notice a build up of calcium deposits in your DishDrawer After you have used the dishwasher cleaner descaler you must run another wash program with detergent to prevent damage to the DishDrawer If you live in an area of naturally soft water or your household water is softened avoid using too much detergent in your DishDrawer An excess amount of detergent is very aggressive on glassware and may cause Irreversible etching Etching is a chemical deterioration that occurs on the surface of glassware when it is subjected to high temperatures too much detergent and or soft water situations Etching is caused by a combination of very hot water which causes the detergent to become very aggressive but because the water is soft there are no water hardness mineral ions for the detergent to bind to so
41. until the light above the START PAUSE button is green if it is not press the POWER button and start again The current water softener setting is shown on the wash program indicator in red lights If four red lights are lit then the water softener is set to four 3 Press the LOCK button to increase or decrease the water softener setting For example if the water hardness is 500ppm there should be four red lights lit 4 Once you have selected the desired water softener setting press the POWER button to return to the Normal Operating Mode O OOO HEAVY NORMAL FAST DELICATE Rinse EXample of the Water Softener set to 4 DishDrawer 17 option adjustment mode How to Remove the Auto Power Option When the DishDrawer leaves the factory it is programmed to automatically turn itself on whenever the drawer is opened The DishDrawer will not start washing until the drawer is closed and the START PAUSE button has been pressed If you do not want the DishDrawer to turn itself on automatically this feature can be turned off Prefinished Models 1 Enter the Option Adjustment Mode as explained previously 2 Press the START PAUSE button until the letters AP appear on the electronic display 3 Press the LOCK button to turn the Auto Power feature on or off The brush symbol is not present on the electronic display when the Auto Power feature has been turned off 4 Press the POWER button to return to the Normal Operating
Download Pdf Manuals
Related Search