Home

Finlux 40F6050 User's Manual

image

Contents

1. Note You can not switch broadcasts or view the Media Browser during the recording mode Watching Recorded Programmes In the main menu use lt or P buttons to select the Media Browser Highlight the Recordings Library using or P button and press the OK button to enter the Recordings Library Select a recorded item from the list if previously recorded by using V or A buttons Press the OK button to view the Play Options Select an option by using VW or A or OK buttons Play options Resume Play from offset Available playback options e Play from start Plays the recording from the beginning e Resume Resumes Playback from the point at which you stopped playback previously e Play from offset Specifies a playing point Note Viewing main menu and menu items will not be available during the playback Press the I STOP button to stop a playback and return to the Recordings Library Slow Forward If you press Ill PAUSE button while watching recorded programmes the slow forward feature will be available You can use PP button to slow forward Pressing PP button consecutively will change slow forwarding speed Recordings Library To view the list of recordings select Recordings Library and press the OK button The Recordings Library will then be displayed with available recordings All the recordings are kept in a list in the recordings library
2. RED button Delete Erases the selected recording GREEN button Edit Makes changes on the selected recording BLUE button Sort Changes the order of the recordings You can select from a wide range of sorting options OK button Activates the play options menu gt Resume Playback INFO Details Displays the programme information details Recording Configuration Select the Recording Configuration item in the Settings menu to configure the recording settings Format Disk You can use the Format Disk feature for formatting the connected USB disk IMPORTANT Note that ALL the data stored on the USB disk will be lost and the disk format will be converted to FAT32 if you activate this feature If your USB disk malfunctions you can try formatting the USB disk In most cases formatting the USB disk will restore normal operation however ALL the data stored on the USB disk will be lost in such a case Note f USB is too slow message is displayed on the screen while starting a recording try restarting the recording If you still get the same error it is possible that your USB disk does not meet the speed requirements Try connecting another USB disk A Product Safety e Do not drop objects on the product or knock the product forcefully This may result in an electric shock or fire e Do not use your product near a humidifier or kitchen counter This may result in an electric shock or fire e Do not disas
3. w N N N ses es 1 Gy hes Las Es Es Evy I ov 4 oly 2 o NI oO N o lmis olalsa v n o N Q NT NM NM o olojo x x X _ a ojojo NOT NM RD A AR A 1080P X Not Available O Available 4440x900 75Hz In some cases a signal on the TV may not be displayed properly The problem may be an inconsistency with 42 fee standards from the source equipment DVD Set top 1680x1050 60Hz box etc If you do experience such a problem please HEVNE 1920x1080 contact your dealer and also the manufacturer of the BGM 1920x1200 source equipment English 16 Appendix C Supported File Formats for USB Media Browser od oe Movie dat mpg Mpeat 2 mpeg peg ts trp tp m2ts MPEG2 vob MPEG1 2 Layer 1 2 mkv mp4 MOV MPEG1 2 avi asf wmv MPEG2 mp3 MPEG1 Layer 1 2 3 MP3 OGG Wav LPCM WMA ASF WMA WMA Pro m4a aac AAC HEAAC e ep jpg jpeg Baseline JPEG png Progressive JPEG bmp non interlace png interlace sub srt English 17 Appendix D Supported DVI Resolutions When connecting devices to vour TV s connectors using DVI converter cable not supplied vou can refer to the following resolution information SKV Remote Control Code The Skv Code is 065 1 Turn vour TV on 2 Press TV on vour Skv remote control handset 3 Hold down SELECT and the RED button together for about two seconds until the
4. buttons while in 14 9 Zoom Cinema or Subtitle Using the Channel List Edit Channel List 1 BBC ONE 2 BBC TWO 3 ITV1 4 Channel 4 5 Channel 5 6 ITV2 7 BBC THREE 9 BBC FOUR 10 ITV3 11 Pick TV OK Delete KEA Function og Watch MLE Page UP DOWN ESB Exit as Back m filter Edit name The TV sorts all stored stations in the Channel List You can edit this channel list set favourites or set active stations to be listed by using the Channel List options Press the MENU button to view the main menu Select the Channel List item by using Left or Right button Press OK to view menu contents Select Edit Channel List to manage all stored channels Use Up or Down and OK buttons to select Edit Channel List Press the Up or Down button to select the channel that will be processed Press the Left or Right button to select a function on the Channel List menu Use P P buttons to move page up or down Press MENU button to exit Sorting Channel List You can select which broadcasts will be listed in the channel list To display specific types of broadcast you should use the Active channel list setting Select the Active channel list from the Channel list menu by using V or A button Press the OK button to continue You can select a network type option from the list by using or P and OK buttons English 9 Menu Features and Functions Picture Menu Contents Vou can change the
5. English 7 Store Mode Selected Are You Sure If Home Mode is selected Store mode will not be available after the First Time Installation Press OK button on the remote control to continue and the following message will be displayed on the screen Do you want to start an automatic channel scan You must select YES to search and store broadcasts The television will search for digital terrestrial TV broadcasts No Automatic channel scan Retunej Please wait This will take a few minutes Scanning digital channels UHF 50 aaa WEN Cancel scan B NOTE You can press MENU button to cancel After all the available stations are stored the Channel List will be displayed on the screen If you are satisfied with the order of channels press the OK button to quit the channel list and watch TV Digital AeriaVAnalogue Channel list 1 BBC ONE 2 BBC TWO 3 ITV1 4 Channel 4 5 Channel 5 6 ITV2 7 BBC THREE 9 BBC FOUR 10 ITV3 11 Pick TV Watch filter Digital Aerial Analogue Digital Cable Analogue Qc English Media Playback via USB Input You can connect a USB hard disk drive or USB memory stick to your TV by using the USB inputs of the TV This feature allows you to play files stored in a USB drive 2 5 and 3 5 inch hdd with external power supply external hard disk drives are supported IMPORTANT You should back up your files before making any connections to t
6. Troubleshooting amp TIPS 2 ccc c cccccecceeccscssccessenseas 15 Licence Notifications ss sennnnnennnzenneza 15 Appendix A PC Input Typical Display Modes 16 Appendix B AV and HDMI Signal Compatibility Input Signal Types cccecceeceeeeeeeeeeeeeeeees 16 Appendix C Supported File Formats for USB Media BSE re 17 Appendix D Supported DVI Resolutions 18 SKY Remote Control Code ccccceeeeee ees 18 PEN bi ktntie dd ak air itii esnai 18 English 1 Power cord and plug e The power cord plug should be easily accessible If there is lightning or storms or if the TV is not going to be used for a while e g if going away on holiday disconnect the TV set from the mains e Do not place the TV furniture etc on the power cord or pinch the cord e Handle the power cord by the plug do not unplug the TV by pulling the power cord e Never touch the power cord plug with wet hands as this could cause a short circuit or electric shock e Never make a knot in the power cord or tie it with other cords e Power cords should be placed in such a way that they are not likely to be stepped on or provide a trip hazard e A damaged power cord plug can cause fire or give you an electric shock When damaged it must be replaced this should only be done by qualified personnel Moisture and Water e Do not use this TV in a humid or damp place avoid using in the bathroom or nea
7. standby LED lights up To switch on the TV from standby mode either Press the cy button P P or a numeric button on the remote control Press the control switch located on the left side of the TV The TV will then switch on To Switch the TV Off Press the acy button on the remote control or press and hold the control switch on the TV so the TV will switch to standby mode To power down the TV completely unplug the power cord from the mains socket Note When the TV is switched to standby mode the standby LED can blink to indicate that features such as Standby Search Over Air Download or Timer is active The LED can also blink when you switch on the TV from standby mode First Time Installation When turned on for the first time the language selection menu appears The message Welcome please select your language is displayed and all language options are listed alphabetically First time installation Welcome please select your language English i Bienvenue Veuillez choisir une langue Francais Willkommen W hlen Sie bitte Ihre Sprache aus Deutsch Benvenuti Selezionate la vostra lingua Italiano Bienvenido seleccione un idioma Espanol Hos geldiniz l tfen dil se imini yap n z T rk e Dobrodosli izberite vas jezik Slovenski V lkommen v lj ditt sprak Svenska dv z lj k k rj k v lassza ki a nyelvet Magyar Bem vindo favor selecionar seu idioma Portugu s Tervetu
8. the P or Y A buttons to select or set an item Press BACK or EXIT or MENU button to quit a menu screen Input Selection Once you have connected external systems to your TV you can switch to different input sources Press the EE SOURCE button on your remote control consecutively to select the different inputs Changing Channels and Volume You can change the channel and adjust the volume using the V and P buttons on the remote 4 Remote Control Standby On Channel list Volume up down Menu on off OK Channel list Confirm Return Back No function My button 1 My button 2 Coloured buttons Red Green Yellow Blue eS Se eS il xa Mono Stereo Dual I II Current language N Fast rewind in media browser mode oO Pause in media browser mode Timeshift recording 14 Programme recording 15 Play in media browser mode 16 Stop in media browser mode 17 Fast forward in media browser mode 18 Subtitle on off Subtitle in media browser mode 19 Image size 20 Teletext Mix 21 Media Browser 22 Electronic programme guide 23 Exit 24 Navigation buttons 25 Quick menu 26 Info Reveal in TXT mode 27 Programme up down 28 Mute 29 Previous programme Now in EPG mode 30 Numeric buttons 31 AV Source CE NOTE The Remote Control range is approximately 7m 23ft Using Mv button 1 Pres
9. the reception and display sources possible various external devices This device is only suitable for operation in dry interiors This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes We exclude liability in principle if the device is not used as intended or unauthorized modifications have been made To operate your TV in extreme ambient conditions may cause damage to the device A WARNING Never let people including children with reduced physical sensory or mental capabilities or lack of experience and or knowledge use electrical devices unsupervised Children may not recognize the dangers of incorrect use The swallowing of batteries can be fatal Keep batteries out of reach of small children If a battery is swallowed immediately seek medical attention Keep the packaging films out of reach of children to prevent the risk of suffocation Power source e The TV should be operated only from a 220 240 V AC 50 Hz outlet Positioning the TV e For ventilation please leave a clear space of at least 10cm all around the TV e Do not block the ventilation openings e Do not place the TV on sloping or unstable surfaces the TV may tip over e To prevent damage to the TV do not place any objects on top of the TV English 3 Viewing the TV TV Control Buttons Operatio
10. FINLUX Customer Helpline Number 0845 459 5282 A 1 Ann ji b 7 my mA PRN vie gt A 40in LED TV 40F6050 Owner s manual Contents Environmental Information s ss nenennnnnnnzni 2 Accessories included L ss nnennennenzznnnnennenza 3 TV FCAPS ii iena Ai aa 3 Safety Precautions and Important Information 3 Viewing the TV endemorenen 4 TV Control Buttons amp Operation 008 4 Operation with the Buttons on the TV 4 Operation with the Remote Control 4 Remote Control sLauvemeoorassadradnemmmner 5 Inserting the Batteries into the Remote Control 7 Connect Power amp Antenna eneenenzzennenzni 7 SWIHCHING ON OM assistita aa 7 First Time Installation Lyugsssssememmmermnee 7 Media Playback via USB Input nn 8 Quick Men iiirezoniiiuiezenzoj aa ia air 9 Changing Image Size Picture Formats 9 Using the Channel List nem 9 Menu Features and Functions ccc0ecees 10 Electronic Programme Guide EPG 13 Recording ProgramMmeusavuvasesmrrsnennn 13 Timeshift Recording 2 mumsasssssnerssrdssdedassdedkas ne 14 Instant Recording asked iii 14 Watching Recorded Programmes 655 14 Recording Configur tibon uesseassssonass sasn 14 Product SAGN vicccicicceccmsassensmasactaaieerewsgeonseaaasaans 14 8116 112 AEE EE 15 Software Upgrade l istint 15
11. Sound optional Surround sound mode can be changed as On or Off Digital Out Sets digital audio output type Install and Retune Menu Contents Automatic Channel Scan Retune Digital Aerial Searches and stores aerial DVB stations Manual Channel Scan This feature can be used for direct broadcast entry Analogue Fine Tune You can use this setting for fine tuning analogue channels This feature is not available if no analogue channels are stored First Time Installation Deletes all stored channels and settings resets TV to factory settings and starts first time installation You can follow the instructions in the First Time Installations section for more information on this process Clear Service List This setting is visible only when the Country option is set to Denmark Sweden Norway or Finland Use this setting to clear channels stored English 11 Menu Features and Functions Settings Menu Contents Conditional Access Controls conditional access modules when available Language Configures language settings Parental Configures parental settings Timers Sets timers for selected programmes USB Record aj ja Displavs the recording configuration menu Date Time Sets date and time Sources Enables or disables selected source options Other Settings Displavs other setting options of the TV set Menu Timeout Changes timeout dur
12. ase disconnect one of the devices No picture 1 No Picture means that your TV is not receiving a transmission Have you selected the correct button on the remote control Try once more Also make sure the correct input source has been selected 2 Is the aerial connected properly Licence Notifications HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC HOM HIGH DEFINITION MULTIMEDIA INTERFACE 15 Appendix A PC Input Tvpical Displav Appendix B AV and HDMI Signal Modes Compatibilitv Input Signal Tvpes The following table is an illustration of some of the tvpical video displav modes Vour TV supports up to 1920x1200 Source Signals 640x350 85Hz TEET o 640x400 70Hz 640x400 85Hz RGB 50 60 oO 640x480 60Hz SECAM HE 640x480 66Hz PAL 0 640x480 72Hz Tum NTSG80 o 640x480 85Hz secaM oo 800x600 56Hz PaL5060 o 670000 Une Side AV NTSC 60 HE 800x600 70Hz 800x600 72Hz SECAM TA 800x600 75Hz 800x600 85Hz 832x624 75Hz 1024x768 60Hz 1024x768 66Hz 1024x768 70Hz 1024x768 72Hz 1024x768 75Hz 1024x768 85Hz 1152x864 60Hz 1152x864 70Hz 1152x864 75Hz 1152x864 85Hz 1152x870 75Hz 1280x768 60Hz 1280x768 75Hz 1280x768 85Hz 1280x960 60Hz 1280x960 75Hz 1280x960 85Hz 60Hz 34 75Hz 35 85Hz 36 1360x768 60Hz 1400x1050 60Hz 1400x1050 75Hz 1400x1050 85Hz 1440x900 60Hz 720P 10801 10801 olo l ow
13. ation for menu screens Scan Encrvpted Blue Background When this setting is on the search process will locate encrypted channels as well If it is set as Off encrypted channels will not be located in automatic or manual searches Activates or deactivates the blue background system when the signal is weak or absent Software Upgrade To ensure that your TV always has the most up to date firmware Please ensure that the TV is set to standby mode with an aerial connected to pick up the over air download Application Version Displays application version Hard of Hearing Enables any special feature sent from the broadcaster Audio Description Audio description refers to an additional narration track for blind and visually impaired viewers of visual media including television and movies You can use this feature only if the broadcaster supports the additional narration track Auto TV Off You can set the timeout value of the auto off feature After the timeout value is reached and the TV has not been operated for a selected time the TV will go into standby mode Standby Search optional If you change Standby Search to Off this function will be unavailable To use Standby search please make sure that you select Standby Search as On If the Standby Search is set to On when the TV is in standby mode available broadcasts will be searched If the TV locates any new or missing broadcasts a menu scree
14. d two channels at the same time Recording a Programme IMPORTANT When using a new USB hard disk drive it is recommended that you first format the disk using your TV s Format Disk option To record a programme you should first connect a USB disk to your TV while the TV is switched off You should then switch on the TV to enable the recording feature To use the recording function you need to connect a USB disk or an external hard disk drive to the TV and the connected USB disk should have at least 1GB capacity and should have 2 0 speed compatibility If the connected USB device does not support 2 0 speed an error message will be displayed Note Recorded programmes are saved into the connected USB disk If desired you can store copy recordings onto a computer however these files will not be available to be played on a computer You can play the recordings only via your TV Note Lip Sync delay may occur during the timeshifting Radio recording is not supported The TV can record programmes up to ten hours Recorded programmes are split into 4GB partitions If the writing speed of the connected USB disk is not sufficient the recording may fail and the timeshifting feature may not be available Recordings of HD programmes can occupy more space on the USB disk compared to SD programmes For this reason it is recommended to use a USB hard disk drive to record HD programmes Do not unplug the USB HDD during a recordin
15. e displayed Standby Cause No Operation Press OK to continue ten Accessories included Remote Control Batteries 2 x AAA Instruction Book Side AV Connection Cable TV Features e Remote controlled colour LED TV e Fully integrated digital tuner e HDMI Inputs are for connecting a device that has a HDMI socket e USB input e 10000 programmes e OSD menu system e Scart socket for external devices such as DVD Players PVR video games etc e Stereo sound system e Teletext e Headphone connection e Automatic programming system Manual tuning e Automatic power down after up to six hours e Sleep timer e Child lock e Automatic sound mute when no transmission e NTSC plavback e AVL Automatic Volume Limiting e PLL Frequency Search e PC input e Plug amp Play for Windows 98 ME 2000 XP Vista Windows 7 e Game Mode optional Safetv Precautions and Important Information A Preparation Place the device on a solid even surface For ventilation purposes leave a free space of at least 10 cm all around the set Do not place any objects on top of the set Use this device in moderate climates Operation temperature and operation humidity 5 C up to 45 C 85 humidity max Note Don t block ventilation holes Please read these instructions fully before installing or operating Intended Use This device is used to receive and display TV programmmes The different connection options expand
16. g This may harm the connected USB HDD Multipartiton support is available A maximum of two different partitions are supported If the disk has more than two partitions a crash may occur The first partition of the USB disk is used for PVR ready features It also must be formatted as the primary partition to be used for the PVR ready features Some stream packets may not be recorded because of signal problems so sometimes the video may freeze during playback ie Record Plav Pause Displav for PlavListDialog kevs can not be used when teletext is ON If a recording starts from the timer when teletext is ON teletext is automatically turned off Also teletext usage is disabled when there is an ongoing recording or playback Timeshift Recording Press Il PAUSE button while watching a broadcast to activate timeshifting mode In timeshifting mode the programme is paused and simultaneously recorded to the connected USB disk Press gt PLAY button again to resume the paused programme from where you stopped You will see the timeshift gap between the real and the timeshifted programme in the info bar Instant Recording Press RECORD button to start recording an event instantly while watching a programme You can press RECORD button on the remote control again to record the next event on the EPG In this case the OSD will display the programmed events for recording Press Il STOP button to cancel instant recording
17. gned to consume less energy to help save the environment You can not only help to save the environment but you can also save money by reducing your electricity bills thanks to the energy efficiency features of this TV To reduce energy consumption you should take the following steps You can use the Power Save Mode setting located in the Picture menu If you set the Power Save Mode as Eco the TV will switch to energy saving mode and the luminance level of TV set will be decreased to the optimum level Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode If Picture Off is selected Screen will be off in 15 seconds message will be displayed on the screen Select PROCEED and press OK to continue The screen will be off in 15 seconds Power Save Mode When the TV is not in use please switch off or disconnect the TV from the mains plug This will also reduce energy consumption It is highly recommended that you activate the Power Save Mode setting to reduce your annual power consumption 1 If the TV does not receive any input signal e g from an aerial or HDMI source for 5 minutes the TV will go into standby When you next switch on the following message will be displayed Standby Cause No Signal Press OK to continue 2 If the TV has been left on and not been operated for 4 hours the TV will go into standby When you next switch on the following message will b
18. he TV set in order to avoid any possible data loss The Manufacturer will not be responsible for any file damage or data loss It is possible that certain types of USB devices e g MP3 Players or USB hard disk drives memory sticks may not be compatible with this TV The TV supports FAT32 and NTFS disk formatting but recording will not be available with NTFS formatted disks Note While formatting a USB hard disk that has 1TB Tera Byte or more file capacity you can experience problems with the formatting process Quickly plugging and unplugging USB devices is a very hazardous operation This may cause physical damage to the USB player and the USB device itself Do not pull out the USB module while playing a file Media Browser Menu You can play photo music and movie files stored on a USB disk by connecting it to your TV Connect a USB disk to one of the USB inputs located on the side of the TV Media Browser The USB selection OSD will be displayed on the screen Press the MENU button and select the Media Browser tab by using the Left Right and OK buttons The Main media browser screen will be displayed You can display the approprite content by selecting the Video Music or Picture tab Follow the button indications under each on screen menu for media playback features Pressing the MENU button while in the Media Browser mode will access the Picture Sound and Settings menu options Pressing the MENU button again will exit fr
19. l for details of the settings Type Scart Connection back VGA Connection back Connection HDMI Connection back amp side S PDIF Optical Out back Side AV Connection side Headphone Connection side YPbPr Video Connection back USB Connection side Cl Connection side Subwoofer Connection back Cables AM f AV Connection Cable supplied i English 6 Inserting the Batteries into the Remote Control 1 Lift the cover on the back of the remote upward gently 2 Install two AAA batteries Make sure to match the and ends of the batteries in the battery compartment observe the correct polarity 3 Replace the cover Connect Power amp Antenna IMPORTANT The TV set is designed to operate on 220 240V AC 50 Hz socket After unpacking allow the TV set to reach the ambient room temperature before you connect the set to the mains Plug the aerial cable into the ANT socket on your TV Switching On Off To Switch the TV On Connect the power cord to the 220 240V AC 50 Hz Then the
20. loa valitse kielesi Suomi BE Select Language 68 Set language Press the VW or A button to highlight the required language press OK button to select First Time Installation appears Use or P button to set the required country and press W button to select Search Type Use or P to set the desired search type Available search types are digital and analog digital only and analog only When set press Y to select Teletext Language Use or P button to set the Teletext Language and select Scan Encrypted using V or A button You can set Scan Encrypted as Yes if you want to scan coded stations First time installation Welcome Country Norway Search Type Digital only Teletext Language Turk Gre Scan Encrypted Channels Yes MEME Select Setting EEA Choose your country OK Start search Press OK button on the remote control to continue and the following message will be displayed on the screen If the TV is to be used in a store please select the Store Mode For domestic use Home Mode is recommended You can activate Store mode option by using or P button If Store Mode is selected Store mode option will be available in Other settings menu and your TV s settings will be optimized for best display quality A confirmation screen will be displayed after selecting the Store Mode Select YES to proceed Store Mode
21. mic contrast function Dynamic contrast can Contrast be set to one of these options Low Medium High or Off Colour Temp Sets the desired colour tone Picture Zoom Sets the picture size to Auto 16 9 Subtitle 14 9 14 9 Zoom 4 3 or Cinema HDMI True While watching from a HDMI source this feature will be visible in the Picture Settings menu Black You can use this feature to enhance the blackness in the picture Films are recorded at a different number of frames per second to normal television programmes Film Mode aner Turn this feature on when you are watching films to see the fast motion scenes clearly Skin Tone Adjust the desired skin tone Colour Shift Adjust the desired colour tone t Press OK button to edit RGB gain You can configure the colour temperature values using RGB Gain the RGB Gain feature Reset Resets the picture settings to factory default settings Autoposition in Automaticallv optimizes the displav Press OK to optimize PC mode moe om This item shifts the image horizontally to the right hand side or left hand side of the screen PC mode y oston In This item shifts the image vertically towards the top or bottom of the screen PC mode Dot Clock Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive in PC mode presentations like spreadsheets or paragraphs or text in smaller fonts Depending on the resolution and scan fre
22. n Ti G De Tdi 2 Up direction Down direction Programme Volume AV Standby On selection switch English Operation with the Buttons on the TV Volume Setting You can move the control switch upward or downward for changing the volume To increase volume please move the switch upward Move the switch downward to decrease the volume A volume level scale slider will be displayed on the screen Programme Selection First press the control switch once to change channel You can move the switch upward to select the next programme or move it downward to select the previous programme Viewing Main Menu Menu screen cannot be displayed by using the control switch AV Mode Press the control switch consecutively until the source OSD is displayed on the screen Operation with the Remote Control Press the MENU button on your remote control to display the main menu screen Use the or P buttons to select a menu tab and press the OK button to select option Use
23. n aerial signal If Automatic scanning in the Upgrade Options menu is enabled the TV wakes up at 03 00 and searches broadcast channels for new software upgrades If new software is found and downloaded successfully the next time the TV powers up it will have the new software version Note If the TV fails to come on after the upgrade unplug the TV for 2 minutes and plug in again English Troubleshooting amp Tips Image persistence ghosting Please note that ghosting may occur while displaying a persistent image still or paused image LCD LED TVs image persistence may disappear after a short time Try turning off the TV for a while To avoid this do not leave the screen in still picture mode for extended periods of time No power If your TV has no power please check the power cord plug is connected to the mains power socket Poor picture 1 Have you selected the correct TV system 2 Is your TV or house aerial located too close to a non earthed audio equipment or neon lights etc 3 Mountains or high buildings can cause double pictures or ghost images Sometimes you can improve the picture quality by changing the direction of the aerial Is the picture or teletext unrecognisable 4 Check if you have entered the correct channel frequency if you have done manual tuning 5 Please retune the channels 6 The picture quality may degrade when two devices are connected to the TV at the same time In such a c
24. n will be displayed asking you whether or not to execute these changes The Channel list will be updated and changed after this process Please activate the Standby Search setting in order to enable your TV to automatically update the broadcast frequency of the broadcaster broadcast definition and other similar changes Store Mode If you are displaying the TV in a store you can activate this mode Whilst Store Mode is enabled some items in the TV menu may not be available Power Up Mode Standby The TV powers up into Standby mode when the TV is plugged into the mains Last State The TV powers up into On mode when the TV is plugged into the mains and the last channel source is selected English 12 Electronic Programme Guide EPG Some but not all channels send information about the current and next programmes Press the Ca EPG button to view the EPG menu Programme Guide Sat 26 05 Sat 26 05 14 36 14 00 15 00 16 00 7 BBC THREE 9 BBC FOUR 10 ITV3 11 Pick TV 6 ITV2 j Planets Fumi Britain s Got Talent tote On the Buses On the Bu Ka a Nothing To Declare Nothing To Declare Up Down Left Right Navigate EPG OK Displays programme options INF i Displays in detail information on the programme selected GREEN Switches to List Schedule EPG YELLOW Switches to Timeline Schedule EPG BLUE displays filtering options G RECORD the TV will start to record the selected pr
25. ogamme You can press again to stop the recording IMPORTANT To record a programme you should first connect a USB disk to your TV while the TV is switched off You should then switch on the TV to enable the recording feature Otherwise the recording feature will not be available Note Switching to a different broadcast or source is not available during a recording Programme Options In the EPG menu press the OK button to enter the Event Options menu Select Channel In the EPG menu using this option you can switch to the selected channel Record Delete Record Timer After you have selected a programme in the EPG menu press the OK button and the Options screen will be displayed Select the Record option and press the OK button After this operation a recording will be sheduled for the selected programme To cancel an already set recording highlight that programme and press the OK button and select the option Delete Rec Timer The recording will be cancelled English Set Timer Delete Timer After you have selected a programme in the EPG menu press the OK button and the Options screen will be displayed Select the Set Timer on Event option and press the OK button You can set a timer for future programmes To cancel an already set timer highlight that programme and press the OK button Then select Delete Timer option The timer will be cancelled Note It is not possible to recor
26. om this screen 8 Vou can set vour Media Browser preferences bv using the Settings menu Settings View Style Slideshow Interval Shaw Subtitle Subtitle Lanquage Subtitle Position Subtitle Font Size English Down 33 pt Flat wiew style displays all files in removable device Folder view style displays files in selected folder EEJ Seleci BEM Navigate Back Exit k Note If two USB devices are connected to the TV at the same time the first USB device connected to the TV will be named USB drive 1 Select the drive by using V or A buttons and press OK Quick Menu The Quick Settings menu allows you to access some options quickly This menu includes Power Save Mode Picture Mode Equalizer Settings Favourites and Sleep Timer options Press Q MENU button on the remote control to view the quick menu See the following chapters for details of the listed features Settings Power Save Mode Picture Mode Equalizer Settings User Dynamic Favourites Off Sleep Timer Off BEM Navigate CEN Exit KA change Value Exit Changing Image Size Picture Formats Programmes can be watched in different picture formats depending on the transmission received You can change the aspect ratio image size of the TV for viewing the picture in different zoom modes Press the t SCREEN button repeatedly to change the image size You can shift the screen up or down by using V or A
27. picture mode to suit vour preference or requirements The Picture mode more can be set to one of these options Cinema Game Sport Dynamic and Natural Contrast Sets the lightness and darkness values of the screen Brightness Sets the brightness value for the screen Sharpness Sets the sharpness value for the objects displayed on the screen Colour Sets the colour value adjusting the colors To set the Power Save Mode as Eco Picture Off and Disabled See the section Environmental Information in this manual for further information on the Power Save Mode If Picture Off is Power Save a l l l Mode selected Screen will be off in 15 seconds message will be displayed on the screen Select PROCEED and press OK to continue The screen will be off in 15 seconds If you disable Power Save Mode Picture mode will be automatically set to Dynamic This setting controls the backlight level and it can be set to Auto Maximum Minimum or Backlight Eco Mode The Backlight function will be inactive if the Power Save Mode is set to On The optional Backlight cannot be activated in VGA Media Browser mode or while the picture mode is set to Game Noise If the broadcast signal is weak and the picture is noisy use the Noise Reduction setting to reduce Reduction the amount of noise Noise Reduction can be set to one of these options Low Medium High or Off Advanced Settings Dynamic You can change the contrast rate by using the dyna
28. quency that you input to the TV set you may see Phase in PC l kal mode a hazy or noisy picture on the screen In such a case you can use this item to get a clear picture by using trial and error While in VGA PC mode some items in Picture menu will be unavailable Instead VGA mode settings will be added to the Picture Settings while in PC mode English 10 Menu Features and Functions Sound Menu Contents Volume Adjusts the volume level In the equalizer menu the preset can be changed to Music Movie Speech Flat Equalizer Classic and User Press the MENU button to return to the previous menu Equalizer menu settings can be changed manually only when the Equalizer Mode is in User Balance This setting is used for emphasizing left or right speaker balance Headphone Sets the headphone volume You can select Mono Stereo Dual I or Dual II mode only if the selected channel Sound Mode supports that mode Automatic Volume Limiting AVL function sets the sound to obtain a fixed output AVL level between programmes For instance volume level of advertisements tend to be louder than programmes Headphone Lineout optional When you connect an external amplifier to your TV using the headphone jack you can select this option as Lineout If you have connected headphones to the TV set this option as Headphone Dynamic Bass Enables or disables the Dynamic Bass Surround
29. r the kitchen sink e Do not expose this TV to rain or water as this may be dangerous e If any solid object or liquid falls into the cabinet unplug the TV and have it checked by qualified personnel before operating it any further Ventilation e The slots and openings on the TV set are intended for ventilation and to ensure reliable operation e To prevent overheating these openings must not be blocked or covered in any way Heat sources and Flames e Do not expose the TV to direct sunlight or other heat sources e The TV should not be placed near open flames or sources of intense heat such as an electric heater e Ensure that no open flame sources such as lit candles are placed on top of the TV Headphone Volume e Excessive sound pressure from earphones and headphones can cause hearing loss please take care Wall Mounting optional e To prevent injury this TV must be securely attached to the wall in accordance with the installation instructions English Screen e Occasionally a few non active pixels may appear on the screen as a fixed blue green or red point Please note that this does not affect the performance of your product e Take care not to scratch the screen with fingernails or other hard objects Cleaning e Before cleaning unplug the TV from the wall socket e Do not use liquid or aerosol cleaners Only use a soft dry cloth Environmental Information This television is desi
30. red light on the Sky remote control blinks twice 4 Key in 065 The light on the Sky remote control should blink twice 5 Press the STANDBY button on your Sky remote control If your TV switches off press SELECT The light on the Sky remote control blinks twice Now try the other functions Specifications RF AERIAL INPUT 75 Ohm unbalanced OPERATING VOLTAGE 220 240V AC 50 Hz AUDIO OUTPUT POWER W 10 THD 2 x 8 POWER CONSUMPTION W 75 W max PANEL 16 9 display 40 Screen Size DxLxH With foot 221 x 942 x 595 Weight Kg 12 60 DxLxH Without foot 39 x 942 x 558 Weight Kg 12 10 Transmission Standards VHF BAND I III UHF BAND U HYPERBAND DVB T MPEG2 English 18 COS8ECOS
31. s MY BUTTON 1 for five seconds when on a desired source channel or link until the MY BUTTON IS SET message is displayed on the screen This confirms that the selected MY BUTTON is now associated with the selected function Note that if you perform first time installation MY BUTTON 1 will return to its default function P mmmmmmmmmm mmmmm mm mmmmmm 14 Using My Button 2 Press MY BUTTON 2 for five seconds when on a desired source channel or link until the MY BUTTON IS SET message is displayed on the screen This confirms that the selected MY BUTTON is now associated with the selected function Note that if you perform a first time installation MY BUTTON 2 will retur to its default function English 5 Connections Connector EETATTVET kkritriit deig r PC YPbPr Audio NOTE When connecting a device via the YPbPr or Side AV input you must use the supplied connection cables to enable connection See the illustrations above To enable PC audio you will need to use the PC YPBPR CONNECTION cable s WHITE amp RED inputs If an external device is connected via the SCART socket the TV will automatically switch to AV mode When using the wall mounting kit optional we recommend that you plug all your cables into the back of the TV before mounting on the wall Insert or remove the CI module only when the TV is SWITCHED OFF You should refer to the module instruction manua
32. semble repair or modify the product or its parts Doing so may result in damage to the product or a malfunction English 14 e Do not spray cleaner directly onto the surface of the product This may result in discoloration and cracks and may cause the screen display to peel off e Do not let water come into contact with the product when cleaning it Ensure that water does not enter the product This may result in an electric shock or fire e Since the surface of the product is easily scratched make sure you clean the product with a soft cloth As the product may be scratched if there is any foreign material on the cloth make sure to shake off any dust before using it e Do not scratch the surface of the display screen with a sharp tool or clean it using chemicals This may degrade the screen quality e Do not apply force to the display screen e Do not drop or bend the product Digital Teletext Press the button The digital teletext information appears Operate it with the coloured buttons cursor buttons and the OK button The operation method may differ depending on the contents of the digital teletext Follow the instructions displayed on digital teletext screen When the button is pressed again the TV returns to television broadcast Software Upgrade Your TV is capable of finding and updating automatically via the Aerial signal 3 00am search and upgrade mode While the TV is connected to a

Download Pdf Manuals

image

Related Search

Related Contents

MANUEL D`UTILISATION Des Systèmes d`Aide à la Mobilité    Manuel d`utilisation  

Copyright © All rights reserved.
Failed to retrieve file