Ferris Industries 45494KIT User's Manual
Contents
1. Reconnect the fuel supply hose to the new fitting on the inside surface of the tank and secure with the saved hose clamp Secure the fuel supply hose to the frame rail making sure not to contact the pump cooling fan Reinstall the cross bar and mounts onto the new tank and secure with the saved hardware Reinstall the bumper and secure with the saved hardware Figure 1 A 3 8 x 1 1 4 Bolts B 3 8 SAE Washers C Tank Mount Bracket D Tank Mount Plate Fuel Tank Installation E 3 8 Fender Washers F 3 8 Nylon Lock Nuts G 5 16 x 1 1 4 Bolts H 5 16 SAE Washers 48714 Rev 03 2003 TP 200 7125 00 SK D2. Installation Instructions Fuel Tank Replacement Kit 45494KIT amp 45495KIT For Derby Colts amp Stallions AWARNING Before beginning any service work turn off the PTO set the parking brake turn off the ignition and disconnect the spark plug wire s REMOVAL 1 Remove the bumper from the machine Save the hardware Remove the cross bar and mounts from the fuel tanks Save the hardware 3 Remove the fuel supply hose from the bottom of the A WARNING fuel tank and drain all remaining fuel into a suitable container Gasoline is highly flammable and must be handled with care Do not allow open flame smoking or matches in the area 4 Remove the fuel tank from the machine and save all of the hardware Discard the fuel tank and the rub ber grommets 5 Cut the tie wraps that fasten the fuel supply hose to the frame rail 6 Cut 10 25 4cm from the fuel supply hose and wire loom covering Route on the inside of the frame rail Copyright 2003 Ferris Industries All Rights Reserved INSTALLATION iL Install the iso mounts in the front inserts of the new tank Install the new tank mount bracket onto the existing tank mount plate and secure with the supplied hard ware See Figure 1 below for mount and hardware orientation Make sure to use to holes to mount the bracket Install the fuel tank onto the machine and secure with all of the saved hardware
Download Pdf Manuals
Related Search