Home

Epson 7900NL Supplemental Information

1. Lens Installation Installing an optional lensin theno lens mode of your PowerLite projector CPD 18790 Follow these instructions to install an optional lens in the no lens model of your projector Waming To avoid electric shock disconnect the power cord before starting 1 Remove the protective seal from the projector f W y Mii 4 Remove the front and rear caps from the new lens 5 Lower thelensinto the projector making sure the focus and zoom knobs face downward so they fit through the slot in the projector s case Caution M ake sure to support the front of the lens and keep it level or you could damage the guide pins Also use care not to touch the front or back of the lens If you do clean the lens with a soft lint free cloth Make sure focus and zoom knobs face downward Guide pin 6 Secure the lens with the four mounting screws you removed in step 3 7 Replace the lens cover and tighten its screw 8 Turn on the projector and verify that it operates normally Epson is a registered trademark of Seiko Epson Corporation PowerLite is a registered trademark of Epson America Inc 2004 Epson America Inc 8 04 Epson PowerLite Lens Cover N otice T he lens cover is located in the accessories box that comes with the projector Before you start using the projector turn it over and attach the lens cover as shown Epson is a registered trademark of Sako Epson Co
2. rporation PowerLite is a registered trademark of Epson America Inc 2004 Epson America Inc 8 04 CPD 18789

Epson 7900NL Supplemental Information

Contents

Download Pdf Manuals

Related Search

Related Contents