Epson M-Tracer MT500GII Start Here Guide
Contents
1. Do not disassemble and repair the product yourself Doing so may cause an electric shock or accident If fluid leaks from the battery do not touch it with your bare hands If fluid comes into contact with your body immediately rinse it off with tap water and then contact a doctor Caution Make sure the attachment is installed in the correct direction If not installed correctly the product may fly off the golf club Take care not to pinch your fingers when mounting the product to the attachment Be sure to remove this product and attachment from the golf club before storing or carrying the golf club otherwise this product may be damaged when the golf clubs are stored or carried Check that the micro USB port cover is closed securely before use otherwise the product may be damaged due to water exposure or foreign materials When the product is placed in a bag make sure that it does not end up below a heavy object The case may crack or the battery may rupture causing an injury Exercise according to your physical capabilities Stop your activity and consult your doctor if you feel unwell Take care not to hit any people or objects when swinging the golf club Do not use the product for anything other than its intended use Do not throw the product or subject it to strong impacts This could result in damage malfunction or cause an injury Do not wet the product or insert for2. from the App Store for iOS or Google Play for Android 2 Tap uy The Epson M Tracer For Golf app starts 3 Follow the on screen instructions to register an account NOTE Epson Sensing ID allows you to use multiple services and functions provided by Epson with one ID and password The user is responsible for any communication charges incurred when exchanging data using your mobile device For information on charges and other items contact your carrier 5 Mounting the Product q1 Place the attachment around the grip First try the medium size attachment For a thinner grip like on Ladies or Junior clubs try the small size attachment For a thicker grip try the large size attachment The A on the attachment should be pointing the same direction as the golf club If the attachment is upside down the attachment will become loose and fly off the club Golf club mark Make sure the center of the attachment is aligned with the center of the golf club Attachment Grip Slide the attachment from the shaft onto the grip of the golf club If the attachment is too tight widen it with your finger S E Shaft AT A Caution Do not widen the attachment too much otherwise the attachment will break If the attachment is loose do not use the product 2 Putthe strap around the club shaft RZ A Caution Always put the strap around the club shaft 3 Slide the prod
3. EPSON EXCEED YOUR VISION M Tracer Start Here Type MT500G II Model M S751 2014 Seiko Epson Corporation All rights reserved 412898700 Printed in Japan 12 14 Read these instructions before using your product This information is subject to change without notice Introduction This product analyzes golf swings based on extensive measurements and scientific analysis The analysis results which can be easily checked on your mobile device are useful in helping you improve your game The following mobile devices are supported iPhone 5 iPhone 5s iPhone 5c iPhone 6 iPhone 6 Plus iPod touch 5th generation with iOS 7 or later e Mobile device running Android 4 0 or later with Bluetooth SPP What s in the Box M Tracer Attachment a ER L size M size S size D 3 O marks 2 O marks 1 O mark Micro USB Strap Zo Warranty charging cable The supplied micro USB cable is designed specifically for this product Only use it to charge this product The strap comes attached to the M Tracer Attachment Sizes Size Grip circumference L 2 44 2 71 in 62 69 mm M 2 28 2 40 in 58 61 mm S 2 12 2 24 in 54 57 mm 1 Part Names and Functions Top View Status LED blue and red The lamp flashes to indicate the status of the product De For more details see the in app help Pa 4 L VA Chargi ging LED orange C p 4 Pa On Charging SMA Off Charging
4. W 7 This symbol indicates information that if ignored could possibly result arning in death or serious injury due to incorrect handling A Cuit This symbol indicates information that if ignored could possibly result auuon in personal injury or physical damage due to incorrect handling Safety Instructions Warning Be sure to always drape the strap around the grip to secure the product in place Check that the product is properly installed in the attachment before use Replace the strap with a new one if it becomes frayed The cords included with this product contain chemicals including lead known to the State of California to cause birth defects or other reproductive harm Wash hands after handling This notice is provided in accordance with Proposition 65 in Cal Health amp Safety Code 25249 5 and following Do not leave this product within the reach of small children It is a choking hazard and is extremely dangerous if licked or placed in a mouth Turn the power off in public facilities and on public transport This product communicates with your smartphone wirelessly The radio waves may interfere with devices around you causing a malfunction accident or injury Do not charge this product in a location that may become hot such as near a fire or heating appliance in a location subject to direct sunlight or inside a car Doing so may cause a fire burns or the battery to deteriorate
5. complete a anae e Power button Turns the power on off Micro USB charging port and cover Open the cover to charge the device Bottom View Reset button Strap hole Meaning of Status LEDs Status Display Turning on The blue LED turns on for one second and flashes once every two seconds Communicating The blue LED flashes twice every two seconds Turning off The blue LED turns on and then turns off No battery power The red LED flashes once every 5 seconds When turning on the blue LED is on for one second then the red LED flashes once Pairing mode The blue and red LED flash alternately Error The red LED flashes once a second Hardware error The red LED turns on for five seconds and then turns off for half a second repeatedly Please refer to the in app help for additional information about the LED display 2 Charging the Battery Before using your product for the first time make sure the battery is fully charged To charge the product insert the USB plug into a power source You can use Optional USB AC adapter part number E12E204001 Computer using a USB port Turn off the product before charging i gF Micro charging USB cable AC adapter not included The orange LED turns on when the product is charging and off when charging is complete NOTE Stop charging the product even when charging is not finished after 3 hou
6. eign objects inside the product This product is not waterproof so there is the risk of malfunction or electric shock Do not leave the product in a hot or humid location or in direct sunlight It generates heat or causes thermal expansion of the rechargeable battery inside the product Do not attach this product to anything other than a golf club Do not mount the attachment to a golf club that has a damaged grip as this could interfere with the attachment Do not retrieve the product if it comes off the club and goes outside of the hitting box at the driving range Do not widen the attachment when the product is attached to a golf club Before using this product check that it is secured to the golf club If it is insufficienty secured the product may come off causing injury or malfuncion Other Precautions About the built in battery The battery is a consumable item that deteriorates even under normal use e Battery performance will decline if this product is stored for a long period of time without being used The battery life will be shorter in areas with low ambient temperatures e The battery is not replaceable The product uses a rechargeable lithium polymer battery Lithium polymer rechargeable battery is recyclable product When your dispose of the product do not remove the battery from the product and refer to your local regulations For California customers only The lithium batt
7. eries in this product contain Perchlorate Material special handling may apply See www dtsc ca gov hazardouswaste perchlorate EPSON is a registered trademark EPSON Exceed Your Vision is a registered logomark and M Tracer is a trademark of Seiko Epson Corporation iPhone is a trademark of Apple Inc registered in the U S and other countries Android and Google Play are trademarks of Google Inc Bluetooth and the Bluetooth logo are trademarks of Bluetooth SiG Inc in the United States The mark is omitted in this guide General Notice Other product names used herein are for identification purposes only and may be trademarks of their respective owners Epson disclaims any and all rights in those marks CPD 42547
8. le device The product will not measure your swing if the impact is not detected Repeat steps 5 and 6 to record multiple swings When you are finished swinging tap Stop 8 Go to the Analysis page Tap Analysis on iOS Tap Back on Android 9 Push the power button on the product for 2 seconds to turn it off The product automatically turns off when your mobile device screen is left on any screen other than the Measurement screen for over 10 minutes 10 Pinch the attachment then slide the product off of the attachment 11 Slide the attachment off of the grip Attachment Grip Shaft The swing measurement steps and the LED display may vary depending on the Epson M Tracer For Golf version Refer to the Help section of Epson M Tracer For Golf for the latest information When the red LED flashes once per second follow the on screen instructions in the app to troubleshoot the issue When the red LED is on for 5 seconds then off for half a second turn your product off then on When the product operation is unstable push the reset button To clean your product wipe it with a soft dry cloth Do not use chemicals or detergent 7 Viewing the In app Help For details on using the app see the in app Help section 1 Tap Menu at the top left of the Analysis screen 2 Tap Help 8 Specifications Communication method Bluetooth 2 1 EDR Class 2 Communication distance Approximatel
9. paration between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Epson America Inc 3840 Kilroy Airport Way Long Beach CA 90806 U S A Tel 562 290 5254 9 Where to Get Help Internet support Visit epson com support mtracergolf U S or epson ca support mtracergolf Canada for solutions to common problems You can get tips usage information FAQs or e mail Epson Telephone support services Call 562 276 4394 U S or 905 709 3839 Canada Support hours are 6 am to 8 pw Pacific Time Monday through Friday and 7 am to 4 pm Pacific Time Saturday Days and hours of support are subject to change without notice Toll or long distance charges may apply Using the Product Safely Read this document to use this product safely Failure to handle the product as instructed may result in a malfunction or accident e Keep this guide to answer any questions you have about this product during use e This product is designed specifically for use in North America If this product is to be taken and used outside of North America check the relevant laws and regulations of the corresponding country region Meaning of Symbols The following symbols are used to warn of operations and handling that may be dangerous Understand these symbols before reading this guide A
10. rs e The battery may not charge correctly if you are using a charger other than the specified AC adapter e Charging may not finish if your computer is in Sleep or Stand by mode e Connect the micro USB charging cable directly to your computer not to a USB hub 3 Connecting to a Mobile Device To use this product you need to pair it to a mobile device using a Bluetooth connection 1 Place the product within 3 feet 1 m of the mobile device 2 With the product turned off hold down the power button for at least five seconds to turn on the product and enter pairing mode When the product is in pairing mode the status LED flashes blue and red alternately 3 Turn on Bluetooth on your mobile device Example Settings Bluetooth ON 4 Onyour mobile device tap MT last 5 digits of the serial number in the list of detected Bluetooth devices Example MT12345 When pairing is complete iOS the status LED flashes blue twice every two seconds Android the status LED continues flashing blue and red alternately Your mobile device displays MT last 5 digits of serial number as a detected device NOTE The serial number is printed on the sticker on the back of the product If you plan to use the product with different mobile devices you ll need to pair again 4 Installing the Application To use this product you first need to install Epson M Tracer For Golf app on your mobile device 1 Download the app
11. ry Canada license exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of this device This equipment complies with FCC IC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency RF Exposure Guidelines and RSS 102 of the IC radio frequency RF Exposure rules This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio SAR Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna lIncrease the se
12. uct onto the attachment until it comes in contact with the stoppers at the end NOTE Do not push too hard when the attachment is tight on the grip of the golf club Try a thinner grip area or a larger attachment If the attachment is too loose try a thicker grip area or a smaller attachment 4 Make sure the product is firmly attached to the grip A Caution Doesn t move back and forth w 4 The product should not move rom when attached to the grip ve Doesn t move around e Make sure the product is attached to the underside of the club If the product is scratched while mounting it should not affect its functioning 1 Hold down the power button on the product for at least two seconds to turn it on The blue status LED flashes once every two seconds 2 Connect the product to your mobile device using Bluetooth 3 Tap on your mobile device While your mobile device and product are communicating the blue LED flashes 4 Tap Measure to start The red status LED turns on If you need to choose the type of club or shot tap Stop then tap Setup To start measuring again tap Start 5 Address the ball When the product detects that you are standing still this takes a few seconds the blue status LED turns on Target line 90 90 Club face Shaft 6 Swing the club After detecting the impact of the swing the blue LED flashes and the data is transmitted to your mobi
13. y 30 feet 10 m with no obstructions Operation time Approximately 4 hours Built in battery Lithium polymer rechargeable battery Charging method USB bus power 5 V DC Charging time Approximately 2 hours Operating temperature range 32 to 104 F 0 to 40 C Storage temperature range 4 to 113 F 20 to 45 C External dimensions 2in Dx 1 in W x 0 6 in H 50 mm D x 27 mm W x 16 mm H Weight Approximately 0 5 oz 15 g 1 The communication distance varies depending on the surrounding environment and the performance of the Bluetooth device 2 The operation time conditions are in compliance with our measurement conditions 3 The charging time will increase or decrease in accordance with the usage conditions of the charging battery Charging may take about 3 hours from the fully discharged state 4 50 to 95 F 10 to 35 C during charging charge the battery at room temperature as much as possible Certification Information Contains Transmitter Module FCC ID SQK MBH7BTZXXC2 CAN ICES 3 B NMB 3 B Contains Transmitter Module IC 337L MBH7BTZXXC2 FCC IC Notices This transmitter must not be co located or operated in conjunction with any other antenna or transmitter CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment This device complies with Part 15 of FCC Rules and Indust
Download Pdf Manuals
Related Search