Home

Epson 425Wi Operation Guide

Contents

1. Notification AON a i e Monitoring disabled Data being updated Using the icons in Grouping view The following icon operations can be carried out in Grouping view Projector ey Network error Monitor Password authentication error No Monitor Password was entered when the projector was registered or an incorrect Monitor Password was entered p 13 EJ p 16 p 17 Network error TCP connection error 2 Network error ESC VP net communication error D When Temperature level display group view is set to On at Environment setup in the Tool menu an icon indicating the internal temperature of the projector will be displayed on top of the projector icon The default setting is Off As you can get an idea of how the temperature inside the projector is increasing when Temperature level is displayed you can make improvements to the projector s operating environment before a high internal temperature error or high temperature warning occur p 28 Check the following items Check that the projector s power is turned on Check that the LAN cable is connected Check that Standby Mode is set to Communication On or Network On or Network Monitoring is set to On in the projector s configuration menu Check that the projector has been correctly connected to the network The projector information that is generated when a problem is detected is stored until EasyMP Monitor is closed EasyMP Monitor displays will not be
2. cece cece cece eens 36 Procedures for new timer SeEttiINgGS ccc eee cece eect eee eens 38 Mail notification function settingS cccccccccccccccccecs 39 An e mail notifying the operator of a problem warning Status 15 ISSU U cso ots os st 6b oe ener se oes ee enw eee eters 41 Application lock fUNCTION cece cece cece cs cscccccccceees 44 Switching Application lock between enabled and disabled 44 Enabling the application lock 0 ccc ccc cece eee eee eees 44 Disabling the application lock ccc cece eee e ence eeeees 44 Setting a password for cancelling application lock 000 ee 44 Appendix MPOUDIGSNOOUNG o c500scnacedereescceten seer eusasetawce suse 46 Projectors cannot be monitored or controlled cc cece eee eee es 46 An e mail message is not sent when a problem occurs with a projector 46 Uninstalling EasyMP Monitor cccccccccccccccccececs 47 General Notice cccccccccccccccccccccccccccccsccceccccees 48 Trademarks esonnenenneneoneneonsesessosensosevsoesessoveosesesse 48 EasyMP Monitor Features Tasks that can be done using EasyMP Monitor Tasks that can be done using EasyMP Monitor e Mail notification function settings EasyMP Monitor lets you carry out operations such as checking the status of multiple EPSON projectors that are connected to a network and controlling the projectors from the computer You can
3. DVI D1 or HDMI1 DVI D HDMI D Video pe USB Display He USB2 EJ HDBaseT HWET Temperature level K Computer2 E S Video Video BNC DisplayPort uH DVI D2 or HDMI2 SERA EasyMP at B ESN USB or USB1 iip LAN p p Whiteboard The following five icons display the differing internal temperature status of the projector Internal temperature normal High temperature warning Internal temperature error Error information Internal temperature normal mmm_ High temperature warning g Replace Lamp A Replace Lamp Lamp 2 F Lamp error Lamp 2 w Lamp failure at power on Lamp 2 Replace Air Filter ZA Low Air Flow Oey Supply System Error Ballast 1 Cinema filter warning Lamp Cover Open Lamp Error Lamp 1 Lamp failure at power on Lamp failure at power on Lamp 2 Low air flow error Cail Internal Error W Sensor error F Supply System Error Ballast 1 Auto Iris Error f E Shutter error G4 Cooling system error pump mm Exhaust vent shutter error Monitoring window layout Shows a warning problem status using the following icons g Replace Lamp Lamp 1 P Lamp error Lamp 1 Lamp failure at power on Lamp 1 a High temperature warning Air Flow Sensor Err Oh Supply System Error Ballast 2 Gs Shutter warning Lamp Error Lamp Error Lamp 2 i Lamp failure
4. Enter the IP address of the SMTP server Up to address a maximum of 255 bytes can be entered When you change a port number of the SMTP server specify this port number The default value is 25 You can enter a valid number from 1 to 65535 Sender mail Enter the sender s e mail address Up to a address maximum of 255 bytes can be entered Recipient mail Specify the destination addresses for the address 1 notification e mail Up to three destinations can be set Up to a maximum of 255 bytes can Recipient mail address 2 be entered Recipient mail address 3 Mail notification function settings Click Notification event and check the items for mail notification in the window that appears Set mail notification event Recipient mail address 14 Set notification ewent Lamp I Replace Lamp W Lamp failure at power on W Lamp Cover Open W Lamp Error Air Filter I Clean Air Filter Notice I No Air Filter I Low Air Flow IM Replace Air Filter I Air Flow Sensor Err J Air filter air flow sensor error W Low air flow error Network Network eror TCP connection error Network error ESCA P net communication error Network error monitor password authentication error Cancel z Click OK The Set mail notification function window appears again Repeat Steps 3 and 4 to set the notification events for the other email addresses When the setup is c
5. Filter Notice ia Replace Lamp Lamp 1 PF Lamp error Lamp 1 P Lamp error Lamp 2 Lamp failure at power on Lamp failure at power on Lamp 1 Lamp 2 Gi Replace Lamp Replace Lamp Lamp 2 E High temperature warning Z Replace Air Filter 4 No Air Filter Fl Low Air Flow Air Flow Sensor Err Oy Supply System Error Ballast 1 GB Supply System Error Ballast 43 Cinema filter warning 2 W Lamp Cover Open gA Lamp Error Lamp 1 i Lamp failure at power on Monitoring window layout I p 3 4 y Lamp failure at power on Lamp failure at power on Lamp 1 Lamp 2 High internal temperature Esl Low air flow error error Air filter airflow sensor error gj Internal Error Ga Fan error Sensor error Supply System Error Ui Supply System Error Ballast Ballast 1 4 Supply System Error Ballast Auto Iris Error 2 G44 Cinema filter error G amp A Shutter error Fe i Cooling system error i amp 4 Cooling system error Peltier element pump Other error 34 Obstacle Detection Warning Exhaust vent shutter error Easy Interactive Function Error Obstacle Detection Error When Temperature level display group view is set to On at Environment setup in the Tool menu an icon indicating the internal temperature of the projector will be displayed on top of the projector icon The default setting is Off Check the following items Check that the proj
6. Program Files EPSON Projector if the default settings were used to install the software General Notice General Notice All rights reserved No part of this publication may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying recording or otherwise without the prior written permission of Seiko Epson Corporation No patent liability is assumed with respect to the use of the information contained herein Neither is any liability assumed for damages resulting from the use of the information contained herein Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages losses costs or expenses incurred by the purchaser or third parties as a result of accident misuse or abuse of this product or unauthorized modifications repairs or alterations to this product or excluding the U S failure to strictly comply with Seiko Epson Corporation s operating and maintenance instructions Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation This information is subject to change without notice Illustrations in this guide and the actual projector may differ Trademarks Microsoft Windows Windows Vi
7. at power on Lamp 1 High internal temperature error Air filter air flow sensor error Fan error Supply System Error Ballast hh Supply System Error Ballast 2 4 Cooling system error Peltier element Other error 94 Obstacle Detection warning l 2 3 4 i Wty Easy Interactive Function Error When Temperature level display group view is set to On at Environment setup in the Tool menu an icon indicating the internal temperature of the projector will be displayed on top of the projector icon The default setting is Off Check the following items Check that the projector s power is turned on Check that the LAN cable is connected Check that Standby Mode is set to Communication On or Network On or Network Monitoring is set to On in the projector s configuration menu Check that the projector has been correctly connected to the network It describes DVI D if the projector is equipped with both DVI D and HDMI input terminal It describes HDMI if the projector is equipped with both DVI D and HDMI input terminal You can display Replace Lamp at any time by setting a preset in the Environment setup in the Tool menu Detectable error information differs with the projector you are using Checking properties in detail You can check the properties of Group and projectors in detail Monitoring window layout Displaying Group properties Displaying Projec
8. carried out at Edit his time are given below l this time are given below i Lets you change the timer settings that have been Projectors selected from the timer list If a group has been selected for status checking the settings cannot be changed Add ae Registers new timer settings See the next section for more information Enabled disabled Enabled Selects a group or projector to check the status of When a group is selected the timer setting statuses for all projectors in that group are displayed Date Shows the current day in a red box Switches the timer settings that have been selected from Days for which timer settings have been made are shown in bold see tho timer list between Enabled and Disabled Click 4 or to switch to the calendar for the previous or next month Timers Shows a list of the timer settings The line colors in the Timers list have the following meanings ____ Current day s timer setting __ When some of the projectors in the group have timer setting enabled and others have it disabled for the current day s timer setting When the current day s timer setting is a disabled setting EE Timer setting for a day other than the current day Delete Delete Lets you delete timer settings that have been selected from the timer list Close else Closes the Timer Settings window Using the control functions Procedures for new timer settings 9 Pro
9. connection to the network Have the SMTP server IP Check the setting details Has EasyMP Monitor been Uninstall EasyMP Monitor and then re install address Port Number and installed on the computer it p 8 Recipient mail address all correctly been set correctly Is the projector s Standby In order to use EasyMP Monitor to monitor and Mode set to control the projector when it is in standby Communication On or mode the projector s Standby Mode must be Network On or Network set to Communication On or Network On or Is the projector s Standby In order to use EasyMP Monitor ro monitor and Monitoring set to On in the Network Monitoring must be set to On in the Mode set to control the projector when it is in standby configuration menu configuration menu Communication On or mode the projector s Standby Mode must be Network On or Network set to Communication On or Network On or Monitoring set to Onin the Network Monitoring must be set to On in the Has a critical problem When the projector has momentarily stopped configuration menu configuration menu developed causing the working it cannot send e mail messages If the projector to momentarily projector cannot be reset even after it has stop working been checked contact Epson See your User s Guide for more information Are all the projectors that Register the projectors p 11 you want to control or monitor registered See your User s Guide for mor
10. e Controlling registered projectors Projectors can be selected in groups or as single projectors and you can IR IAR then carry out operations for the selected projectors such as turning the power on and off and switching their input sources Web control functions can be used to change the settings in the projector s configuration menu If there are certain control actions which are carried out regularly at particular times or on particular days you can use Timer Settings to register timer settings Installing EasyMP Monitor Installing EasyMP Monitor e Operations carried out at the computer may become slow depending on the number of projectors being managed If this happens use a computer with higher specifications Operating environment e EasyMP Monitor cannot be used in environments which do not allow pings to be transmitted This software is compatible with computers that comply with the following requirements Os Windows 2000 Professional SP4 Transferring the settings Windows XP Home Edition SP2 SP3 Windows XP Professional SP2 SP3 If you are already using EasyMP or EMP Monitor you can transfer the projector settings to this version The settings are stored as a data file Windows Vista 7 EMP Monitor dat Make a copy of the EMP Monitor dat before you All editions except otal Edition install this software EMP Monitor dat can be found at the following Windows Vista SP1 SP2 location if the default settings were
11. of selecting more than one projector at the same time are as IP address box and then click Search When the message follows is displayed click OK e If you select a Group icon in Grouping view all projectors that have been registered in that group will be deleted at the same time e Hold down the Ctrl key on the keyboard while clicking on the desired 2 When the display returns to the Edit projector window click Change icons e Use drag and drop to select a range of desired icons For projectors that have been registered using automatic Sid a J g g QE You can also carry out this operation by selecting Delete in the Edit menu searc Procedure Delete the projector s whose name or IP address has been changed in Grouping view or Detail list view See the next section for more information on deleting projectors Monitoring window layout Monitoring window layout e Detail list view This view lets you display the status of each projector as a list so that the projectors can be checked in detail You can also display specific items Types of monitoring windows and switching method as a list and sort display items using a specific row as a sort key Es Retesh Select al OO Sar Baee okefSembawa 4e f Po Lamp Hours erature level information amp Error information Types of monitoring windows Branch 4 Convention Hall ProjectorO1 Projector02 There are two types of monitoring windows Sel
12. or Network On e Set Network Monitoring to On When the projector s indicator is lit orange Using EasyMP Monitor Registering and deleting projectors for monitoring Registering and deleting projectors for monitoring This operation is carried out when starting EasyMP Monitor for the first time after it has been installed and when you would like to add projectors Once a projector has been registered the status for the projector will be displayed automatically each time EasyMP Monitor is eS Fie Edit view Tool Help started from that point onwards Oo 22 5 o m eflgg a X a E e A i A d e main WINgqow WI e displayed Ny aw TI The red box area described in the screen below is referred to as Grouping view The operations to register projectors vary depending on where the projectors are connected on the network e When registering a projector that is located in the same segment as the computer in which EasyMP Monitor is installed Registering projectors using automatic search Searching for and registering projectors that are located in the same segment p 12 e When registering projectors that are in multiple segments of the network Setting the range of addresses to do an automatic search and registration p 14 Starting EasyMP Monitor Procedure J7 Use one of the following methods to start EasyMP Monitor If your operating system is Windows 2000 Windows XP Windows Vista or W
13. that has been set If the correct password is not entered at this time it will not be possible to monitor and control the projector even though it is registered Display icon Parent group Hone Projector name Projector10 IP address 169 2564 163 Search Port Number ead Monitor Password ee Description W Monitor Register Cancel Make the necessary settings while referring to the following table Registering and deleting projectors for monitoring Description You can enter a memo about the projector The Procedures for automatic search details you enter here will be displayed at the projector properties Procedure Up to a maximum of 60 bytes can be entered Monitor Select this when you want monitoring to start J Right click in Grouping view and select New Projector automatic search After entering the details click Register to start the The Create new projector automatic registration window will be registration When the message is displayed click OK displayed To continue registering other projector s repeat Steps 1 and 2 If Detail list view is displayed select New Projector automatic Ay search from the Edit menu AON Projectors that have been registered using automatic search are searched for again by projector name each time EasyMP Monitor is started p Select the Specify an address range and search check box and then enter Start address and
14. updated automatically even if the projector status returns to normal Click Refresh in the main window to update the status Monitoring window layout e Expanding and collapsing icons Each time you double click a group icon the icons for the projector that have been registered in that group are displayed or hidden e Moving icons To change the position of an icon within Grouping view simply drag and drop the icon to be moved Monitoring using Detail list view Meanings of Detail list view icons The status of registered projectors is displayed as a list in Detail list view regardless of which Group the projectors belong to File View Tool Refresh Select fall Tye I roup name Branch Branch 4 Convention Hall Branch 4 Convention Hall Branch 4 Showroom Showroom 4 Branch 4 Showroom Showroom 4 Branch 4 Showroom Showroom 4 Branch 4 Showroom Showroom B Branch 4 Showroom Showroom B Branch B Conference Room Branch B Conference Room Branch B Conference Room Branch B Conference Room Branch B Reception Room COGDOGOOOO90ODOO0O Branch B Reception Room Monitoring window layout The icon patterns and their meanings are explained below Type Displays the projector status No warnings or problems Warning or problem An error has occurred on the projector Notifica
15. used to install the software All editions except Starter Edition Windows 7 32 bit version All editions except Starter Edition Windows 7 64 bit version e If your operating system is Windows 2000 or Windows XP C Program Files EPSON Projector EasyMP or EMP Monitor Ver x xx Ver x xx represents the software version o If your operating system is Windows Vista or Windows 7 C Users User Name AppData Local VirtualStore Program Files EPSON Projector EasyMP or EMP Monitor Ver x xx Ver x xx Windows 8 32 bit version and 64 bit version e Internet Explorer Ver 5 0 or later must be installed CPU Pentium MMX 166 MHz or higher Pentium II 233 MHz represents the software version or higher recommended If you cannot find the AppData folder click Start Control Panel Memory 64 MB or more 128 MB or more recommended Appearance and Personalization Folder Options Select View capacity tab and then configure the Show hidden files folders and drives Free hard disk 50MBormore setting in Advanced settings space Display SVGA 800 x 600 or higher resolution 32 bit or higher display color Supports only 32 bit version of OS e Macintosh computers cannot be used Installing EasyMP Monitor e If your operating system is Windows 8 C Users User Name AppData Local VirtualStore Program Files EPSON Projector EasyMP or EMP Monitor Ver x xx Ver x xx represents the software version If y
16. EXCEED YOUR VISION EasyMP Monitor Operation Guide Ver 4 53 Notations Used in This Guide The following table shows the symbols used in this manual along with descriptions of what they mean Indicates additional information and points which may be useful to know regarding a topic Indicates a page where detailed information regarding a topic can be found Procedure Indicates operating methods and the order of operations The procedure indicated should be carried out in the order of the numbered steps Name Indicates the name of the buttons on the projector s remote control or the control panel Example Esc button Name Indicates the name of the buttons on the EasyMP Monitor or OS screens Timer Boldface Example Select Timer Timer Settings Select Timer Timer Settings Contents Notations Used in This Guide EasyMP Monitor Features Tasks that can be done using EasyMP Monitor 00 6 Installing EasyMP Monitor cccccccccccccccccccccececes 7 Operating environment ccc cc cee eee cect teen eect eens eeeenees 7 Transferring the setting Scaer rerne eE a AAR es 7 NS CAN aTe E EE A cee EE E EEE E T 8 Limitations imposed by a Windows Vista Windows 7 or Windows 8 environment 0 ccc cece cece eee e eect tees ee eeeeees 8 BefOre Stal tind ODClatlONS ax lt iicccdenheiah line eaa in saWanesnne eemens 8 Using EasyMP Monitor Registering and deleting
17. End address in the range 2 Toend the registration operation click x in the top right corner of the window or click Cancel The icon s of the projector s you registered will be displayed in m Grouping view or Detail list view Refer to Monitoring window layout p 21 for details on using the Grouping view and Detail list view Setting the range of addresses to do an automatic search and registration vie QE Projectors that are using a serial TCP IP conversion adapter cannot be detected pecify an address range and search Cancel Registering and deleting projectors for monitoring Z2 Click Search Automatic searching will be carried out and the names of the pro jectors that have been detected will be displayed Create new projector automatic registration Projector name IF address Projector10 Projector11 Projector12 Projector13 Projector14 Projector15 Projector16 192 168 0 40 192 168 0 41 192 168 0 42 192 168 0 43 192 168 0 44 192 168 0 45 192 168 0 46 V Specify an address range and search Start address 192 168 0 00 End address 192 168 a Edit Cancel Registering and deleting projectors for monitoring Procedures for registration Display name Enter the name of the projector s to be displayed in Grouping view or Detail list view Procedure Up to a maximum of 32 bytes can be entered A space cannot be used as the first
18. See your User s Guide for more information Stop using the projector disconnect the power cable from the electrical outlet and contact Epson See your User s Guide for more information Message High temperature warning Replace Lamp Supply System Error Ballast Replace Air Filter No Air Filter Low Air Flow Air Flow Sensor Err Cinema filter warning Shutter warning Clean Air Filter Notice Exhaust vent shutter error Obstacle Detection Error Obstacle Detection Warning Low air flow error High internal temperature error Other warning Other error No signal See your User s Guide for more information No image signals are being received by the projector Check the connection status and check that the power for the connected equipment is turned on An e mail notifying the operator of a problem warning status is issued Network error TCP Check the following items connection error Check that the projector s power is turned on Check that the LAN cable is connected Check that Standby Mode is set to Communication On or Network On or Network Monitoring is set to On in the projector s configuration menu See your User s Guide for more information Network error Check that the projector has been correctly ESC VP net connected to the network See your User s Guide for communication error more information Network error Check the projector s Monitor Password Monitor Password aut
19. an icon appears in the system tray and the status can be monitored by means of the icon s pattern ORAE The icon patterns are explained below No problem H Problem Procedure Select Environment setup from the Tool menu The Environment setup window will be displayed Select Resident in the task tray Environment setup Update interval 5 minutes Temperature level display group view Off C On Lamp schedule notification Off C On Hour Log output Off C On J Register at startup J Change the application lock password Old password New password New password confirm 2 Click OK AON e Right click the icon in the system tray to open a pop up menu to select the Open the main screen or Exit e If Register at startup in the Environment setup is selected EasyMP Monitor starts automatically when the computer s power is turned on When using EasyMP Monitor under Windows Vista Windows 7 or Windows 8 you must have administrator authority in order to use this function Displaying projectors with problem or warning statuses in a list You can display a list of only the projectors which have a problem or warning status Procedure Select Warning and Error Projector list from the View menu The following Warning and Error Projector list window will be displayed Monitoring window layout If you move the mouse pointer over the icon of the Error informatio
20. cedure Click Add on the Timer Settings window The following window is displayed and the new timer settings are applied Create Mew Timer Schedule mode E Date E Time 24 hour 19 04 Operation Power ON m Cancel At Operation you can carry out the operations of turning the pow er on and off and switching the input sources similarly for the con trol buttons on the main window If you set the input source switching the projector s power will turn on at the timer start time even if it is not on at the time Because of this it is not necessary to make two separate timer settings for turning the power on and switching the input source f After completing the timer settings click OK The timer settings that have been made will be registered and they can be checked in the displayed timer list You can enable and disable all of the timer settings that have been registered Select Timer Enable or Disable from the Tool menu Mail notification function settings Mail notification function settings The mail notification function can be used to send corresponding notification messages to a preset e mail address when a projector that is connected to the network assumes a certain status or if it experiences a problem or warning By using this function the operator can be notified of a projector s status or problems even when the operator is in a different location from the projectors
21. character YZ Select the projector s to be registered from the displayed Display icon senecon to be dieplavedin Grouping list and then click Edit view or Detail list view The following window will be displayed Parent group Select when registering a projector in a group If no groups have been created this cannot be selected Registering several projectors to a monitoring group all at once p 18 Projector This shows the name that has been registered on name the projector IP address This shows the IP address for the registered projector Use Serial lt gt This cannot be selected when registering TCP IP projectors using automatic search conversion adaptor Port Number This cannot be selected when registering projectors using automatic search Monitor If a Monitor Password has been set for the Password projector be sure to enter the Monitor Password that has been set If the correct password is not entered at this time it will not be possible to monitor and control the projector even though it is registered Create new projector automatic search Display name Display icon Parent group Projector name Projector10 IP address 169 264 163 151 search ia Fort Number Monitor Password Description W Monitor Register Description You can enter a memo about the projector The details you enter here will be displayed at the projector properties Make the necessary se
22. e item name so that the view is extended to the desired width Sorting lists You can sort detailed lists by using a specific row as a sort key such as projector name order or IP address order Procedure Click the item name of the row you want to use as the sort key Searching for desired icons Projector list The Projector list feature is useful for searching in lists when many groups and projectors are registered and the icon you are looking for is not displayed on screen Procedure Select Projector list from the View menu The following window will be displayed Show projector list Lobby E A Showroom fy Showroom 4 fi Not fen Noz Nos H E Showroom B G8 Branch B 88 Branch E With Projector list temperature level icons are not displayed regardless of the setting of Temperature level display group view at Environment setup in the Tool menu The Projector list lets you check the registration details for groups in a hierarchical diagram When you click on an icon Grouping view and Detail list view are scrolled so that the selected icon is displayed in the window Monitoring using the system tray The projector statuses are always displayed as icons in the system tray even when Grouping view or Detail list view is not always displayed and the statuses can be checked by the icon patterns Monitoring window layout When the configuration menus are set using the following operations
23. e information See your User s Guide for more information Is power being supplied to Check if the power supply to the location the projector where the projector is set up has been interrupted or if the circuit breaker for the electrical outlet that the projector is connected to has been tripped Uninstalling EasyMP Monitor Uninstalling EasyMP Monitor To save or transfer the existing projector settings make a copy of the EMP Monitor dat file before you uninstall the software Transferring the settings p 7 The following procedures to uninstall Easy MP Monitor vary depending on your operating system e If your operating system is Windows 2000 or Windows XP Click Start Settings Control Panel Add Remove Programs or Add or Remove Programs to uninstall EasyMP Monitor e If your operating system is Windows Vista or Windows 7 Click Start Control Panel Uninstall a program to uninstall Easy MP Monitor e If your operating system is Windows 8 From the Start menu right click EasyMP Monitor Ver x x xx and select Uninstall to uninstall EasyMP Monitor AON With Windows Vista Windows 7 and Windows 8 settings and logs remain on the hard disk even after EasyMP Monitor is uninstalled If you do not need this information delete the EasyMP Monitor Ver x xx Ver X xx represents the version of the existing software folder This folder can be found at C Users User Name AppData Local VirtualStore
24. ect a desired window e Grouping view This view lets you check the status of group registrations in a hierarchical diagram 0000000008000 T B amp B a fj B B B ED Br B B fj B amp amp B amp Br Detail list view Edt yi p a mes O O a Ea el O m oy oy w aunnnnnamnnasnaml A How to switch views Branch B Branch C Grouping view and Detail list view are switched as follows Grouping view Monitoring window layout Procedure Click the View menu and select Grouping view or Detail list view Monitoring using Grouping view Meanings of Grouping view icons In Grouping view the patterns on the icons indicate the statuses of the projectors If the group icons are round in shape it indicates that there is another level below them p 23 iew Tool Help Select all Monitoring window layout The icon patterns and their meanings are explained below No warnings or problems All projectors in the group are normal Warning or problem A projector in the group has a warning or problem status Notification A projector requiring immediate attention has been detected within the group Monitoring disabled l The projector is not being monitored If you right click the icon and select Monitoring enabled the projector will be added to the projectors that are being monitored g Projector a No warnings or problems Warning or problem 3
25. ector s power is turned on Check that the LAN cable is connected Check that Standby Mode is set to Communication On or Network On or Network Monitoring is set to On in the projector s configuration menu Check that the projector has been correctly connected to the network You can display Replace Lamp at any time by setting a preset in the Environment setup in the Tool menu AON e The projector information that is generated when a problem is detected is stored until EasyMP Monitor is closed EasyMP Monitor displays will not be updated automatically even if the projector status returns to normal Click Refresh in the main window to update the status e Detectable error information differs with the projector you are using Selecting display items You can select only the required items to be displayed in Detail list view Procedure J Select Option from the View menu The Option window will be displayed Display items 4 id LI Group name Projector name a Display name IP address o Power x Lamp Hours Source m m Temperature level 7 Description 4 Error information OF Cancel Co J Select the check box of the item you want to display Monitoring window layout any S x g a 2 E AYJ Clic Ny ww Tp im 47 When all of the details of the item cannot be displayed in Detail list view drag the boundary line on the right of th
26. eee cece eee eeeenees 22 Meanings of Grouping VIEW ICONS cece ce ccc cee eee eee eneees 22 Using the icons in Grouping VIEW cc cece eect eee e eee eeees 23 Monitoring using Detail list VIEW 0 ccc ccc ccc ccc cece eee eee eeees 24 Meanings of Detail list View ICONS cece cece eee eee eens 24 Selecting display iteMS ccc cece cece cee eee eee eeeenneees 26 SONO SS oeri rne eroe seaeuatseraesess receuwsunents euaktavawidsowes 27 Searching for desired icons Projector list ccc cece cee eee ee ee ees 27 Monitoring using the system tray cece cece cece cece eee e eee eenes 27 Displaying projectors with problem or warning statuses in a list 28 Checking properties in detail 0 ccc ccc cece cece eect e eet e ee eneaes 31 Displaying Group properties ccc cece eee teen eeeeee 32 Displaying Projector properties ccc ccc cece cece teen eeeeee 32 Displaying and deleting lOGS cece cece cece cece eee eee eeeeeeees 32 Displaying L g 4 biel eice ee on dead ca ek eon e aaa ee eee Baa esha 33 Deleting Oc eds Sales wid Sart ol t Gi ieee eaten was Beane distinc a a e E diane Beare 33 Using the control functions cc cece ccc c ec ec ec cecccceces 34 Carrying out control using control DUttONS cece eee eee eee 34 Carrying out control using a web browser Web control 36 Carrying out control using timer SettiNgS
27. electing New Projector automatic search from the Edit menu e Projectors that are using a serial TCP IP conversion adapter cannot be detected Specify an address range and search Start address End address Search Edit Cancel Registering and deleting projectors for monitoring Procedures for registration Display name Enter the name of the projector s to be displayed in Grouping view or Detail list view Procedure Up to a maximum of 32 bytes can be entered A JN space cannot be used as the first character YZ Select the projector s to be registered from the displayed Display icon Select the icon s to be displayed in Grouping list and then click Edit view or Detail list view The following window will be displayed Parent group Select when registering a projector in a group Sea If no groups have been created this cannot be selected Display name Registering several projectors to a monitoring group all at once p 18 Projector This shows the name that has been registered on name the projector IP address This shows the IP address for the registered projector Use Serial lt gt This cannot be selected when registering TCP IP projectors using automatic search conversion adaptor Port Number This cannot be selected when registering projectors using automatic search Monitor If a Monitor Password has been set for the Password projector be sure to enter the Monitor Password
28. functions The following table shows the meanings of the control buttons Turns the projector power on Power Off Turns the projector power off Switch source Computer1 Switches the input source to the Computer1 eat port or Computer port Switch source Switches the input source to the Computer2 oct Computer 2 port Switch source Switches the input source to the BNC port BNC Switch source Switches the input source to the S Video port S Video Switch source Switches the input source to the Video port or a Video RCA video port Switch source Switches the input source to the Video port S Video BNC Switch source Switches the input source to the SDI port SDI Switch source Switches the input source to the HDBaseT HDBaseT port Switch source Switches the input source to the DisplayPort DisplayPort port Switch source DVI D HDMI 1 Switches the input source to the DVI D1 port or HDMI1 port If the projector is equipped with either a DVI D port or HDMI port use this button to switch the input signal If the projector is equipped with both DVI D port and HDMI port use this button to select DVI D as an input source Switch source DVI D HDMI 2 Switches the input source to the DVI D2 port or HDMI2 port If the projector is equipped with both DVI D port and HDMI port use this button to select HDMI as an input source Switch source Switches the input source to the D4 port D Video Switch source Switc
29. hentication error When the projector has 2 lamps the additional information such as Lamp 1 or Ballast 1 is displayed after the message so that you can know which lamp has problems warnings Messages to inform that the projector has recovered from the error or warning statuses are sent Application lock function Application lock function The password entry window will be displayed so enter the You can use the application lock to prevent third parties from operating set password and then click OK the projectors using EasyMP Monitor and from changing settings If no password has been set default setting click OK without en without authority Opening and closing EasyMP Monitor and status tering a password It is recommended that you enter a password in monitoring can still be carried out even when the application lock is order to strengthen security applied The application lock will be cancelled and operations can be carried In addition when a password has been set the password must be entered out as normal in order to cancel the application lock This ensures that the application lock can not be easily cancelled and thus improves system security Setting a password for cancelling application lock Switching Application lock between enabled and Carry out the following operations while application lock is cancelled disabled Procedure Enabling the application lock U7 Select Environment set
30. hes the input source to EasyMP or EasyMP EasyMP net Switch source Switches the input source to USB Display Switches the input source to the external equipment connected via a USB Type A port or USB1 Switch source Switches the input source to the external USB2 equipment connected via a USB2 port Switch source Switches the input source to the image LAN projected by the computer via a network Switch source Switches the input source to Whiteboard Whiteboard If the button does not function you can switch the input source using the button USB Display Switch source USB1 AON e Some connected projectors may not be equipped with all of the above ports or functions If you click a button for a port or function that is not available nothing will happen Using the control functions e You can select objects to be controlled and use the control buttons to carry out control operations even when the following are being displayed Carrying out control using timer settings Group properties p 32 This is useful for carrying out certain control operations such as turning Projector properties p 32 a projector s power on and off at specified times every day or every week Warning and Error Projector list Timer settings can be carried out either for a single projector only or all Control operations can only be carried out for projectors with a warning at once for all projectors in a group statu
31. indows 7 Click Start Programs or All Programs EPSON Projector EasyMP Monitor Ver x xx to start EasyMP Monitor If your operating system is Windows 8 From the Start menu select EasyMP Monitor Ver x x xx to start EasyMP Monitor Registering and deleting projectors for monitoring lt Click Search Automatic searching will be carried out and the names of the pro jectors that have been detected will be displayed Registering projectors using automatic search Searching for and registering projectors that are located in the same segment If a projector does not appear in the list use Registration by spec ifying an IP address Manual registration p 17 Procedures for automatic search Create new projector automatic registration Projector name _ IP address P roced ure Projector10 192 168 0 40 J Right click in Grouping view and select New Projector automatic search Projector11 Projector12 Projector13 Projector14 Projector15 Projector16 192 168 0 4 192 168 0 42 192 168 0483 192 168 0 44 192 168 0 45 192 168 0 46 The following Create new projector automatic registration win dow will be displayed If Detail list view is displayed select New Projector automatic search from the Edit menu Specify an address range and search Start address Create new projector fautomatic registration AON e You can also carry out this operation by s
32. istration details can also be checked using Projector list in the View space cannot be used as the first character l menu Display icon Select the icon s to be displayed in Grouping view Parent group This selects the parent group If no groups have been created this cannot be selected Registering and deleting projectors for monitoring Carry out automatic search to re register the If the projector name or IP address changes after projector s p 12 registration For projectors that have been registered manually Cancelling projector registrations Delete The registrations for projectors can be deleted if they are no longer Procedure required for monitoring or control using EasyMP Monitor p Right click on a projector icon in Grouping view or Detail list Procedure view and select Monitoring disabled Then right click the projector icon again and select Edit Right click the icon for the projector or group that is to be deleted ee in Grouping view or Detail list view and select Delete When the AON You can also carry out these operations by using the Edit menu eer eee NS message is displayed click OK L If only the projector name has been changed click Search More than one projector can be selected for deleting by selecting in in the Edit projector window that is displayed If the IP Grouping view or Detail list view address has been changed enter the new IP address in the The methods
33. istration groups and then register projectors into the selected the settings made when the individual groups that have been created projectors were registered will be used It cannot be set when creating a new group Procedure QE You can also carry out this operation by selecting New Group from the f Edit menu J Right click in Grouping view and select New Group The following window will be displayed When the setup is complete click Register to start the Make the necessary settings while referring to the table below registration When the message is displayed click OK If Detail list view is displayed select New Group from the Edit menu The icon s of the projector s you registered will be displayed in Grouping view Create new group Group name Right click the projector icon s to register to the group you have created in Grouping view or Detail list view and select Edit Display icon Parent group None QE You can also carry out this operation by selecting Edit in the Edit menu Register Cancel In the Edit projector window select the group name to use for registering in Parent group and then click Change The status of the group registration will be displayed as an icon in Group name Enter the name of the group to be displayed in Grouping view Grouping view or Detail list view a Up to a maximum of 32 bytes can be entered A QE The reg
34. n details of the error and the remedy will be displayed If you double click in a line the properties for that projector will be displayed p 32 D O on annn Refresh Sitlect all 4 5 6 7 Monitoring window layout The icon patterns and their meanings are explained below Type Shows the group or projector status GB No warnings or problems Warning or problem An error has occurred on the projector s Notification The projector requires immediate attention ra Monitoring disabled The projector is not being monitored If you right click the icon and select Monitoring enabled the projector will be added to the projectors that are being monitored Data being updated Network error Monitor Password authentication error l No Monitor Password was entered when the projector was registered or an incorrect Monitor Password was entered p 13 p 16 p 17 Network error TCP connection error v Network error ESC VP net communication error gt Display name Shows the display name Power Shows the power on status for the projector Power on and normal status Power off and normal status Power on and abnormal Power off and abnormal Status Status Lamp Hours Shows the lamp operating time for the projector Source Shows the input source that has been selected for the projector l Computer or QQS Computer1 jogge PNC Video RCA gt 22
35. omplete click OK An e mail notifying the operator of a problem warning status is issued An e mail notifying the operator of a problem warning status is issued If the projector experiences a problem or enters a status requiring attention an e mail like that shown below is sent to the address specified for Recipient mail address If there is more than one problem warning or status the corresponding messages are output to separate lines Details shown E mail subject Display name displayed in Grouping view or Detail list view Projector status notification Body lt Display name displayed in Grouping view or Detail list view gt has entered the following status lt Warning error status message gt Please see the next table An e mail notifying the operator of a problem warning status is issued The details contained in the e mail message can consist of the following Message Easy Interactive Function Error Internal Error Fan error Sensor error Lamp Cover Open Lamp failure at power on Lamp Error Supply System Error Ballast High internal temperature error Low air flow error Air filter air flow sensor error Cinema filter error Shutter error Cooling system error Peltier element Cooling system error pump Auto Iris Error Stop using the projector disconnect the power cable from the electrical outlet and contact Epson See your User s Guide for more information
36. ou are using a serial lt gt TCP IP conversion registration from the Edit menu adapter to connect the projector enter the port J number V Enter the IP address of the projector to be registered in the Monitor Ifa Monitor Password has been set for the IP address box and then click Search When the message Password projector be sure to enter the Monitor Password is displayed click OK that has been set If the correct password is not entered at this time it will not be possible to monitor and control the projector even though it is registered If you are using a serial gt TCP IP conversion adapter to connect the projector the Search Monitor Password security function cannot be used If you are using a serial gt TCP IP conversion adapter and cable to connect the projector select Use Serial gt TCP IP conversion adaptor enter the port number in Port Number and then click 2 After searching is complete enter the information for the projector to be registered while referring to the table below Display name Enter the name of the projector s to be displayed in Grouping view or Detail list view Up to a maximum of 32 bytes can be entered A space cannot be used as the first character Description You can enter a memo about the projector The details you enter here will be displayed at the projector properties Up to a maximum of 60 bytes can be entered Monitor Select this when you want monitoring to star
37. ou cannot find the AppData folder from the Start menu click Control Panel Appearance and Personalization Folder Options Select View tab and then configure the Show hidden files folders and drives setting in Advanced settings After installing this software follow the instructions below before starting EasyMP Monitor to transfer the settings o If your operating system is Windows 2000 or Windows XP Overwrite the existing EMP Monitor dat file with the copy you made The existing EMP Monitor dat file is in C Program Files EPSON Projector EasyMP Monitor Ver x xx e If your operating system is Windows Vista Windows 7 or Windows 8 Place the copy of the EMP Monitor dat file in C Users User Name AppData Local VirtualStore Program Files EPSON Projector EasyMP Monitor Ver x xx The software name has been changed Before EMP Monitor After EasyMP Monitor If you are already using EMP Monitor you can replace with this software Installing You must have administrator authority in order to install Easy MP Monitor To download the software and manual visit www epson com and select your location Double click the downloaded software file to start the install program Follow the on screen instructions If EasyMP or EMP Monitor is already installed uninstall it before installing this software Uninstalling EasyMP Monitor p 47 Limitations imposed by a Windows Vista Windo
38. projectors for monitoring 11 Starting EasyMP MONON sccaiden tere itetwin a r EE eee 11 Registering projectors using automatic search Searching for and registering projectors that are located in the same segment 12 Procedures for automatic Search cc cece cece eee ete eeeenes 12 Procedures for registration 0 ccc cece cece cee eee e eee eeeeeeees 13 Setting the range of addresses to do an automatic search and EEEE E EE E E E E EE karate tin alate E Ap Mie a EE EE 14 Procedures for automatic search ccc cece cece e eee eeeenes 14 Procedures for registration 0 ccc eee c cece cece eee e eee eeeeees 16 Registration by specifying an IP address Manual registration 17 Registering several projectors to a monitoring group all at once 18 If the projector name or IP address changes after registration 20 For projectors that have been registered manually 20 For projectors that have been registered using automatic search 20 Cancelling projector registrations Delete cc cece cece ee ees 20 Monitoring window layout cccccccccccccccccccccecece 21 Types of monitoring windows and switching method 4 21 Types of monitoring WINGOWS ccc cece ccc ee eee eee eeenees 21 FIOW TOSWITGI VIGWS ces cyi sey 05 ad et dal Hen ayaa Meee tule meee eas 21 Monitoring using Grouping VIEW cece cc cece
39. s p 28 Procedure Carrying out control using a web browser Web Select Timer Timer Settings from the Tool menu control The following window will be displayed and you can then check the timer setting status You can use the computer s web browser to change the configuration menu settings for projectors ap 2 Timer Settings Procedure g a 04 2009 gt X J L amp Convention Hall J 7 Right click on the icon of a projector to be controlled in 3 WF stourcon D a DONO OO MS E P E 7 e gy Showroom 9 wo Grouping view or Detail list view and select Web control a mi apei No3 Y q yg Showroom B lt The web browser will open and the Web control window will oD hs ij b e dis la e d ajai _Display name Date Time 24 hour Operation p y amp Lobby 4 7 2009 18 43 Computer2 yay Showroom B 4 7 2009 18 45 Power ON No3 4 7 2009 18 59 Power ON sa Showroom 4 4 7 2009 18 59 Power ON Web control lets you set the same details as the configuration menu for the projector See your User s Guide for more information vls AON You can select projectors and right click on them to select Web control even when the following are being displayed Group properties p 32 Warning and Error Projector list Control operations can only be carried out for projectors with a warning status p 28 Using the control functions The details that can be checked and operations that can be
40. set e mail addresses to which notifications are sent if a status requiring attention such as a problem occurs with a projector that has been registered Following are brief descriptions of the monitoring and control functions e Sending messages to registered projectors that can be carried out using EasyMP Monitor You can send JPEG files to the registered projectors at once by using e Registering projectors for monitoring and control Message Broadcasting which is a plug in software for EasyMP Projectors on the network can be searched for automatically and you Monitor can then select projectors to be registered from the projectors that are To download the software and manual visit www epson com select detected your location and select your product You can enter the IP addresses for target projectors to register them e Registered projectors can also be assigned to groups so that they can Q be monitored and controlled in groups aN Bo e Monitoring the statuses of registered projectors Wl The power status ON OFF for projectors and problems or warnings See requiring attention can be checked visually by means of icons You can select groups of projectors or a single projector that you are interested in and then check the cumulative lamp operating time or the details of information such as input sources problems and warnings for these projectors 00000 DNUO000 wa AAAA Uuuu aA qi
41. sta and the Windows logo are trademarks of Microsoft Corporation in the United States of America and other countries Macintosh is a registered trademark of Apple Computer Inc Pentium is a registered trademark of Intel Corporation EPSON EasyMP and EasyMP net are registered trademarks and EPSON Exceed Your Vision is a registered logomark of Seiko Epson Corporation Other product names used herein are also for identification purposes only and may be trademarks of their respective owners Epson disclaims any and all rights in those marks 2013 Epson America Inc 3 13 CPD 38875
42. t Select the icon s to be displayed in Grouping 4 After entering the details click Register to start the view or Detail list view registration When the message is displayed click OK Parent group Select when registering a projector in a group If The icon s of the projector s you registered will be displayed in no groups have been created this cannot be Grouping view or Detail list view selected See the next section for more information on registering projectors to a group Registering several projectors to a monitoring group Projector This shows the name that has been registered on name the projector IP address This shows the IP address that you entered in step all at once 2 Projectors that have been registered can then be registered together into Use Serial lt gt Select this if you are using a serial TCP IP TCP IP conversion adapter to connect the projector conversion Furthermore if you select one of the registered groups as the Parent adaptor group monitoring and control operations can be carried out for all projectors in that Parent group different groups so that they can be monitored and controlled together Registering and deleting projectors for monitoring A Parent group can be set for other parent groups so that a hierarchical Select this to monitor all projectors that have group arrangement can be created been registered in the group If this is not First create the reg
43. tion The projector requires immediate attention Monitoring disabled The projector is not being monitored If you right click the icon and select Monitoring enabled the projector will be added to the projectors that are being monitored Data being updated amp l lt 4 Network error Monitor Password authentication error No Monitor Password was entered when the projector was registered or an incorrect Monitor Password was entered p 13 p 16 p 17 g vA Network error TCP connection error 7 v Network error ESC VP net communication error gt Group name When projectors are registered to a group the name of the group that the projector belongs to is displayed Display name Shows the display name Power Shows the power on status for the projector Power on and normal status Power off and normal status Power on and abnormal Power off and abnormal Status Status Lamp Hours Shows the lamp operating time for the projector If the projector has 2 lamps it shows the lamp operating time for both lamp 1 and lamp 2 Temperature level The following five icons display the differing internal temperature Status of the projector Internaltemperature Internal temperature normal normal High temperature mm_ High temperature warning warning Internal temperature error Error information Shows a notification or warning problem status using the following icons Clean Air
44. tor properties Procedure Right click on a projector icon in Grouping view or Detail list view and select Property You can use either of the following methods to display the proper TOTEEN ties Siinain Ene e Displaying the properties for all groups in Grouping view Group name Branch A Right click in Grouping view and select Property Projector name teat E ae p Display name Lobby e Displaying the specified group properties ae sensed Right click an icon in Grouping view and then select Property Lamp Hours 33H Temperature level Group properties Branch 4 Description Peteh Select at OO BSB ome m o Emana Type Display name Power Lamp Hours Source Temperature level Error information eael sii Seem e joe ae Il ee Version information i saan Convention He w eee ete a a Error information No signal Ge Lobby O 33H tom Shows the projector s serial number If hyphens are displayed confirm If you double click in a line the properties for that group or projector the serial number on the label of the projector will be displayed Displays the projector firmware version Displaying and deleting logs In your web browser you can check a transmission log of content such as what has been controlled by EasyMP Monitor and projector errors You can delete logs once you have checked them Monitoring window layout Vis AON When Log output is set to On at Environment setup in the Tool menu
45. transmission logs are stored The default setting is Off Displaying Log Procedure Select Log View from the View menu The web browser will open and the communication logs up until that time will be displayed Deleting Log Procedure Select Log Delete from the View menu When the confirma tion message is displayed click OK All logs will be deleted and details of EasyMP Monitor control operations and details of projector errors from that point onward will be recorded in a new log Using the control functions Using the control functions Carrying out control using control buttons Click the icon of a projector to be controlled in Grouping view or Detail list view and click a control button to enable control of only that selected projector You can also enable control of all selected projectors by selecting more than one projector in Grouping view or Detail list view and clicking a control button The methods of selecting more than one projector at the same time are as follows e If you select a group icon in Grouping view all projectors that have been registered in that group and that are set to be monitored can be controlled at the same time e Hold down the Ctrl key on the keyboard while clicking on the desired icons e Use drag and drop to select a range of desired icons us File Edit View Tool Help __Refesh Select al Oo SS _4gg9 os 48 SeMm2q0 2 Branch B Branch C Using the control
46. ttings while referring to the following table Up to a maximum of 60 bytes can be entered Monitor Select this when you want monitoring to start Registering and deleting projectors for monitoring After entering the details click Register to start the registration When the message is displayed click OK Registration by specifying an IP address Manual To continue registering other projector s repeat Steps 1 and 2 registration 2 Toend the registration operation click x in the top right Procedure corner of the window or click Cancel m J Right click in Grouping view and select New Projector The icon s of the projector s you registered will be displayed in manual registration Grouping view or Detail list view Refer to Monitoring window layout p 21 for details on using The following window will be displayed the Grouping view and Detail list view If Detail list view is displayed select New Projector manual reg istration from the Edit menu Create new projector manual registration Display name Display icon Parent group Projector name IP address i Seach Use Serial lt gt TCP IP conversion adaptor Port Humber Monitor Password Description W Monitor Register Cancel Registering and deleting projectors for monitoring QE You can also carry out this operation by selecting New Projector manual Port Number If y
47. up from the Tool menu The Environment setup window will be displayed Procedure YY Select Change the application lock password Select Application lock from the Tool menu The application lock will be enabled and no operations will be possible YZ Enter the password in both the New password and New other than opening and closing EasyMP Monitor and disabling the password confirm boxes and then click OK application lock The password can be up to 16 bytes in length Single byte alphanu meric characters can be used Disabling the application lock Procedure J Select Application unlock from the Tool menu Appendix Troubleshooting Troubleshooting An e mail message is not sent when a problem occurs with a projector Projectors cannot be monitored or controlled Is the projector connected Check that the network cable has been to the network correctly connected correctly If the cable is not Is the projector connected Check that the network cable has been connected correctly reconnect it to the network correctly connected correctly If the cable is not connected correctly reconnect it Has the projector been set Check the Network configuration settings Has the projector been set Check the Network configuration settings up correctly for See your User s Guide for more information connection to the up correctly for See your User s Guide for more information network
48. vile AON e Up to three addressees destinations can be registered and messages can be sent to all of them at once e Ifa critical problem develops with a projector which causes it to suddenly stop working it may not be possible for the projector to send a message notifying an operator of the problem e If Standby Mode is set to Communication On or Network On or Network Monitoring is set to On in the projector configuration menus you can monitor the projector even when it is in standby mode when its power is turned off See your User s Guide for more information e On some projectors the mail notification function can be set in the configuration menu When notification messages are set to be sent in the projector s configuration menu both the settings in the configuration menu and settings made on EasyMP Monitor are functional e Detectable status with the mail notification function differs with the projector you are using Procedure J Select Mail notification function from the Tool menu Set mail notification Function Mail notification function SMTP server IP address Port Number 25 Sender mail address Recipient mail address 1 Notification event Recipient mail address 2 Notification event Recipient mail address 3 notification event Cancel Make the necessary settings while referring to the table below Mail notification Set to On to use the mail notification function function SMTP server IP
49. ws 7 or Windows 8 environment When using EasyMP Monitor under Windows Vista Windows 7 or Windows 8 note the following limitations e You must have administrator authority in order to use Register at startup on the Environment setup screen of EasyMP Monitor Monitoring using the system tray p 27 e If EasyMP Monitor is installed on your computer uninstall it before you update the operating system to Windows Vista Windows 7 or Windows 8 Updating your OS without uninstalling the software may cause a malfunction Uninstalling EasyMP Monitor p 47 Before starting operations Check the following points before starting up EasyMP Monitor e EasyMP Monitor must be installed on the computer to be used for monitoring and control e The computer and the projectors must be connected to the network e Depending on the projector model a commercially available serial gt TCP IP conversion adapter and a connection cable are required in order to use EasyMP Monitor See your projector s User s Guide Make the settings for the serial TCP IP conversion adapter before connecting to the projector Installing EasyMP Monitor To enable projectors to be monitored and controlled even when they are in standby mode make the following settings at the projectors The settings that need to be made will vary depending on the projector you are using See your User s Guide for more information e Set Standby Mode to Communication On

Download Pdf Manuals

Related Search

Related Contents

CTA Digital PAD-SMT holder  Sony VPCJ128FG  File 2  SAMLite Version 5 Build 2.0 Release Notes  User`s Manual Rev J Model 1200  MERTECT ® 500 SC  Kettler 2533 User's Manual  Manual - Petri Konferenztechnik  Samsung NC240 Korisničko uputstvo  Philips myGarden  

Copyright © All rights reserved. Failed to retrieve file