Elk 45 User's Manual
Contents
1. 8637 800 797 9355 828 397 4200 Fax 828 397 4415 www elkproducts com info elkproducts com PRODUCTS INC 05 02 Instructions ELK 45 1 Mount the U shaped bracket to the wall 2 Insert one of the two short bolts into each side of the U shaped bracket with the threads protruding out Align the heads of the bolts with the slotted openings on each side of the siren housing Slide the siren onto the bolt heads Install a washer and nut on each bolt and tighten Connect Black wire to Neg of alarm output O a A WwW Connect Red wire to Pos of alarm output NOTE Siren is factory set for maximum loudness with a current draw of about 1 2 Amps To lower the current draw and volume remove the four screws and cover from the back Follow the Red speaker wire to where it solders to the circuit board Cut this Red wire approx 3 back from the board Splice the Red wire from the speaker to the unused Yellow wire on the circuit board using the enclosed wire nut The ELK 45 is designed for Single Output Alarm Controls that use a STEADY Output for BURG ora PULSING Output for FIRE For an Alarm Control panel that has separate BURG and FIRE alarm outputs connect the Red wire to each output then program one output for Steady Burg and the other for Pulsing Fire Connect the Black wire to Neg2. Self Contained Electronic Siren The ELK 45 is a loud self contained electronic siren ina compact and attractive housing This siren draws less current than many competitive units and features the ability to produce two distinct sounds from a single input trigger The Combo Trigger option allows controls which have a single alarm output and pulsing option to activate both the burglar and fire alarm sounds The MilliMiser option allows the already low current draw of the ELK 45 to be reduced even lower This is ideal for controls with limited alarm output power The ELK 45 s removable U shaped mounting bracket makes installation quick and simple It s small and compact size allows it to be placed in vents attic eaves and soffits and other unique locations where large and bulky units will not fit Also available is the ELK 150RT which is the self contained siren in a stainless steel enclosure e Installer Friendly Compact amp Easy To Mount e Exterior Interior use e MilliMiser Lowers Current Draw e ComboTrigger For Single Outputs e Pre Wired For Easy Installation e Removable U Shaped Mounting Bracket e Lifetime Limited Warranty e Operating Voltage 6 to 14 Volts D C e Current Draw 1 2 Amps 700 mA on MilliMiser e Sound Level 118 dB 1 meter 14 Volts D C e Size 4 x 4 x 3 5 Depth 4 Features or Specifications subject to change without notice PO Box 100 Hildebran NC 2
Download Pdf Manuals
Related Search