Element Electronics ELEFW401A User's Manual
Contents
1. Press Power on remote control Press Input Source Select proper AV source Press ENTER Exitthe Menu and start enjoying your new TV If you need help please consult your User s Manual or vi www elementelectronics com art Guide Element LCD TV s LIMITED WARRANTY TO ORIGINAL CONSUMER LCD TV CCFL or LED Backlight 40 and Under Screen Size Models the Product This Product including any accessories included in the original packaging as supplied and distributed in new condition Is warranted by Element Electronics Corp Element to the original consumer purchaser against defects in material and workmanship Warranty as follows 1 LABOR For a period of one 1 year from date of original consumer purchase if this Product or any part is determined by Element ora Element authorized service provider to be defective Element will repair or replace the Product with new or refurbished product of similar or better quality at Element s option at no charge to the original consumer or pay the labor charges to any Element authorized service provider After the one 1 year Warranty period you must pay for all labor charges 2 PARTS For a period of one 1 year from the date of original consumer purchase Element will supply at no charge to the originat consumer new rebuilt or refurbished replacement parts in exchange for defective parts or will replace the Product with new or refurbished product of similar2. This equipment is a Class II or double insulated electrical appliance It has been designed in such a way that it does not require a safety connection to electrical earth ADDITIONAL SAFETY INFORMATION To ensure reliable and safe operation of this equipment please read carefully all the instructions in this user guide especially the safety information below Electrical Safety The TV set should only be connected to a main power supply with voltage that matches the label at the rear of the product To prevent overload do not share the same power supply socket with too many other electronic components Do not place any connecting wires where they may be stepped on or tripped over Do not place heavy items on them which may damage the leads Hold the main plug not the wires when removing from a socket During a thunderstorm or when not using the television for extended period of time turn off the power switch on the back of the television Do not allow water or moisture to enter the TV or power adapter Do NOT use in wet moist areas such as bathrooms steamy kitchens or near swimming pools Pull the plug out immediately and seek professional help if the main plug or cable is damaged liquid is spilt onto the set if accidentally exposed to water or moisture if anything accidentally penetrates the ventilation slots or if the set does not work normally Do not remove the safety covers There are no user serviceable parts insid
3. Adjust the balance between red and green levels Adjust the level of crispness in the edges between light and dark areas of the picture For User mode Color Temperature Cycle among color temperature Cool Normal Warm Allow the blue background to turn On Off during weak Blue Screen l s or no signal conditions 13 CUSTOMIZING TV SETTINGS Audio Settings Press the MENU button on the main unit or on the remote control then press the A V buttons to select AUDIO menu and then press the or gt Sound Mode Standard the OK button to enter ae e Press the A V buttons to select Ho _ Balanco the following audio options and then de Surround Sound oe press the lt gt buttons to adjust each A T ed a option s setting Audio Language English Channel 4 Select Allow the selection of an audio enhancement technique Standard Music Movie User D Alternative You may press the S MODE button to select the sound mode directly Control the relative intensity of lower pitched sounds For User mode Control the relative intensity of higher pitched sounds For User mode Provide an enhanced listening experience Volume levels are automatically controlled Select the digital audio output mode between RAW PCM Select audio language among English French Spanish Adjust the audio output between the left and the right speakers 14 CUSTOMIZING TV SETTINGS Time Settings Press the
4. V CHIP__ USB Operation Press to pause or resume the playback Press to stop the playback and clear the existing memory ea gt P Press to skip between chapters lt lt gt gt Press to adjust the playback speed REPEAT Press repeatedly to select the repeat mode CONNECTING EXTERNAL DEVICES ANITENINA Gul Hoi E P USB 5V 500mA COAXIAL OPERATING YOUR TV Turning On Off Your TV e Connect the power cord to the power socket after you have completed all the physical connections At this stage the TV will enter Standby Mode and the red LED indicator will illuminate e In Standby Mode press the button on the main unit or on the remote control to turn the TV on The red LED indicator will turn blue The POWER button on the main unit or on the remote control can only switch the TV into standby To completely turn off the TV please disconnect the power cord from the power socket Setup Wizard you are turning on your LED TV for the first time you will see the following menu below e Please select Home Mode or Standard Mode to continue Choose your Picture Mode wW O Standard Mode Select ENERGY STAR is a joint program of the U S Environmental Protection Agency and the U S De
5. a e Select vin EXit e Select m Exit Picture Sound Mode Bass Treble Balance Surround Sound Auto Volume E 1 SPDIF Type TEE NTT OA ET UET lt 1 Channel Standard English a e Select i i a sit Picture Sleep Timer Time Zone r Off Pacific Daylight Saving Time Off Setup i iiam Lock Channel 4 gt Select om Be Ln ee it Picture Menu Language Transparency Zoom Mode Noise Reduction Advanced Closed Caption 1p es E i Display Mode Restore Default Lock Channel English Off Wide Middle oyn Home Mode x gt Select CUSTOMIZING TV SETTINGS Picture Settings e Press the MENU button on the main unit or on the remote control then w press the A W buttons to select RE Ae PICTURE menu and then press the p gt Ei Contrast or the OK button to enter R ees e Press the A W buttons to select the ime Tint following picture options and then ji Sharpness press the 4 gt buttons to adjust each rate ae N option s setting Channel Cycle among picture modes Standard Dynamic Movie Natural User Picture Mode gt Alternative you may press the P MODE button to select the picture mode directly Adjust the difference between light and dark levels in Contrast the pictures For User mode Increase or decrease the amount of white in the Brightness picture For User mode Control the color intensity For User mode
6. Cinema Reduce the noise level of the connected device Off Weak Middle Strong Adjust the PC desktop content VGA source mode only Pictu CoO Allows you to turn closed captioning of audio on or off select analog or digital modes or personalize the captioning style CC Mode Select CC mode among On Off or CC on Mute Basic Select analog mode among CC1 CC2 Selection CC3 CC4 Text1 Text2 Text3 Text4 pave le Eu Select digital mode among Service1 6 Selection l Personalize the captioning style such as Option the size and color of the digital caption Select to turn On Off the dynamic luminance control Restore the TV to factory default settings Except the lock settings a B Move m amp Select Return J 16 CUSTOMIZING TV SETTINGS Lock Settings e Press the MENU button on the main unit or on the remote control and then press the A V buttons to select LOCK menu e Use the 0 9 buttons to input 4 digit password to enter the LOCK menu e Press the A V buttons to select the following options and then press the 4 gt buttons to adjust each option s setting Enter Password udio System Lock Input 4 digit in US password ime Canada a RRT Setting etu Reset RRT _ Clear Lock a E Select The default password is 0000 Use 0 9 buttons to input the old password and then input the new 4 digit password Re enter new password for confirmation Return Select to turn On Of
7. MENU button on the main unit or on the remote control then press the A W buttons to select TIME menu and then press the p or the OK button to enter Press the A V buttons to select the following time options and then press the gt button to adjust each option s setting Picture Audio Time _ Channel 4 Sleep Timer i Off Time Zone i Pacific Daylight Saving Time Off Move Select Select a period of time after which the TV automatically switches to standby mode Off 5 10 180 240 min Alternative You may press the SLEEP button repeatedly to select the number of minutes directly Select a Time Zone among Pacific Alaska Hawaii Eastern Central or Mountain Select to turn On Off daylight saving time 15 CUSTOMIZING TV SETTINGS Press the MENU button on the main unit or on the remote control then aii press the A V buttons to select Picture Mena Lana LAE English 3 SETUP menu and then press the gt or Transparency Off the OK button to enter A S ee ae e Press the A V buttons to select e the following setup options and then Closed Caption d press the lt 4 gt buttons to adjust each r EN Mode me te option s setting Restore verauit Channel s Select Select menu language among English Fran ais or Espa ol The default on screen menu language is English Select to turn On Off transparency function Select zoom mode among Normal Wide Zoom
8. js ELEMEN ELEFW401A OUT ELECTRONICS 40 FHD Digital LED TV INSTRUCTION MANUAL Please read all the instructions carefully before using this TV and keep the munual for future reference CONTENTS Important Safety Instructions Additional Safety Information Preparations What is Included Front Rear View Wall Mounting Remote Control Connecting External Devices Operating Your TV Turn On Off Your TV Setup Wizard Selecting Input Source Channel Selection Volume Adjustment Customizing TV Settings Navigating the On screen Display Picture Settings Audio Settings Time Settings Setup Menu Lock Settings Parental Control Channel Settings USB Multimedia Listening to Music Viewing Photos Troubleshooting FCC Notes Specifications 10 12 21 22 25 25 IMPORTANT SAFETY INSTRUCTIONS Read these instructions All the safety and operating instructions should be read before this product is operated Keep these instructions The safety and operating instructions should be retained for future reference Heed all warnings All warnings on the appliance and in the operating instructions should be adhered to Follow all instructions All operating and use instructions should be followed Do not use this apparatus near water The appliance should not be used near water or moisture for example in a wet basement or near a swimming pool and the like Clean only with dry clo
9. notice 25 X This product contains electrical or electronic materials The presence of these materials may if not disposed of properly have potential adverse effects on the environment and human health Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately As a consumer you are responsible for ensuring that this product is disposed of properly This TV incorporates High Definition Multimedia Interface HDMI technology HDMI the HDMI logo and High Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC
10. repair s by non authorized service facilities c onsite consumer instruction or adjustments d transportation shipping delivery Insurance installation or set up costs e costs of product removal transportation or reinstallation costs f ordinary wear and tear cosmetic damage o r damage due to acts of nature accident g commercial use of the Product h modification of or to any part of the Product In addition this Warranty does not cover images burnt into the screen This Warranty applies to the original consumer only and does not cover products sold AS IS or WITH ALL FAULTS or consumables e g fuses batteries bulbs etc and the Warranty is invalid if the factory applied serial number has been altered or removed from the Product This Warranty is valid only in the United States and Cana da and oniy applies to products purchased and serviced in the United States and Canada Al replaced parts and products and product son which a refund is made become the property of the Warrantor NO WARRANTIES WHETHER EXPRESS OR IMPLIED INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OTHER THAN THOSE EXPRESSLY DESCRIBED ABOVE SHALL APPLY THE WARRANTOR FURTHER DISCLAIMS ALL WARRANTIES AFTER THE EXPRESS WARRANTY PERIOD STATED ABOVE NO OTHER EXPRESS WARRANTY OR GUARANTY GIVEN BY ANY PERSON FIRM OR ENTITY WITH RESPECT TO THE PRODUCT SHALL BE BINDING ON THE WARRANTOR REPAIR REPLAC
11. the TV still fails to operate normally please contact technical support Refer to Warraty page SYMPTOM POSSIBLE CAUSE REMEDY e Check all connections to the Dead No LED lit No power to the TV TV s AC socket e Press either the Power button Dead No LED lit red Set in standby mode or the Standby button on the remote control No signal Blue screen Incorrect source selected e Press the SOURCE button to select the correct source e If using an indoor antenna try ghosting cnet ee Poor antenna signal adjusting the antenna position picture TV Check antenna connections Sound Mute e Turn sound Mute off Volume set too low e Check volume settings No sound External leads e Check that all external leads not connected if used are connected properly Noisy snowy 22 TROUBLESHOOTING Before contacting the service technician perform the following simple checks If any problem still persists unplug the LED TV and call for assistance PROBLEM POSSIBLE SOLUTIONS e Check that the main plug has been connected to a wall outlet e Check that you have pressed the POWER on the front of the TV set e Check the picture contrast and the brightness setting l e Set in standby mode Press either the Power button Check the volume Sound muted Press the MUTE button Normal picture but no sound Try another channel the problem may be with the broadcast Are the audio cables installed properly Ch
12. you can turn it on or off with the Lock On Off option e You can set different Parental Control viewing restrictions for general audiences and for children both can be active at the same time e Simply specifying one content block such as Sex Scenes will not automatically restrict the programming that appears from the video sources e Even If you choose to leave the AUX Inputs unblocked the ratings you specify will automatically restrict the programming that appears from the video sources e You can not disable Parental Control by disconnecting the TV from power Block hours will be automatically reset to the original block time setting specified if power is disconnected 18 CUSTOMIZING TV SETTINGS Motion Picture Association of America MPAA Rating System Grade Meaning Suggested their children to view the program Program is inappropriate for preteens with a greater degree of offensive material suggested than a PG rated program Parents Strongly Cautioned Hard Core Films Same as NC 17 rating No Rating No Rating MPAA Not Rated TV Parental Guideline Rating System Grade Meaning All Children Content not offensive to most viewers Directed to Older Considered suitable for children over 7 may TV Y7 i l Children contain fantasy violence scenes TV G Seneca dence Considered suitable for all audience children may watch unattended parena Cuda Suggested unsuitable for younger children TV PG may contain suggestive l
13. EMENT OR REFUND OF THE ORIGINAL PURCHASE PRICE AT THE WARRANTOR S SOLE DISCRETION ARE THE EXCLUSIVE REMEDIES OF THE CONSUMER THE WARRANTOR SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE MISUSE OR INABILITY TO USE THE PRODUCT NOTWITHSTANDING THE FOREGOING CONSUMER S RECOVERY SHALL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT SOLD BY Element THIS WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL CONSUMER WHO PURCHASED THE PRODUCT AND IS NOT TRANSFERABLE Some states do not allow the exclusion or limitation of incidental or consequential damages or allow limitations on warranties so the above limitations or exclusions may not apply to you This Warranty gives you specific rights and you may have other rights which vary from state to state Please send all correspondence to Element Electronics Corp Customer Service 6880 Commerce Blvd Canton MI 48187 USA customerservice elementelectronics com DO NOT SHIP PRODUCT TO THIS ADDRESS PLEASE CONTACT THE CUSTOMER SERVICE TO CONFIRM SHIPPING ADDRESSES FOR SERVICE Warranty Card PREPARATIONS IR en ar Infrared Receiver LED The LED light indicates when the LCD TV is activated Switch the TV between On Standby mode SOURCE Press to select among different input signal sources e MENU Display the OSD on screen display menu e CH A V Press to select a channel e VOL Press to ad
14. anguage bad Suggested i language sex and violence scenes unsuitable for children under 14 may contain Parents Strongly TV 14 aalioned strong language bad language sex and violence scenes Mature Audience Adults only may contain strong language bad TV MA l Only language sex and violence scenes Canadian Rating e Canadian English is used throughout all English speaking Canada C C8 G PG 14 18 e Canadian French is used in Quebec G 8 ans 13 ans 16 ans 18 ans The V Chip will automatically block certain categories that are more restrictive If you block TV Y category then TV Y7 will be automatically blocked Similarly if you block TV G category then allthe categories in the young adult will be blocked TV G TV PG TV 14 and TV MA 19 CUSTOMIZING TV SETTINGS Channel Settings Press the MENU button on the main unit or on the remote control and on then press the A V buttons to select Picture CHANNEL menu Air Cable Press A V buttons to select the a following channel options and then ime Show Hide press the 4 gt buttons to adjust each x Sah a option s setting F DTV Signal 4 Select Find and store all available channels automatically Allows you to select cable system among Auto STD IRC HRC before going to auto scan if you choose Cable as input signal It will go straight to auto scan if you choose Air as input signal Set the selected channel as one
15. e Trying to service the unit yourself is dangerous and may invalidate the product s warranty Qualified personnel must only service this apparatus To avoid battery leakage remove exhausted batteries from the remote control or when not using for long period Do not break open or throw exhausted batteries on a fire Physical Safety Do not block ventilation slots in the back cover You may place the TV in a cabinet but ensure at least 5cm 2 clearance all around Do not tap or shake the TV screen or you may damage the internal circuits Take good care of the remote control To clean the TV use a soft dry cloth Do not use solvents or petroleum based fluids Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong the wide blade or the third prong is provided for your Safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs Unplug the apparatus during lightning storms or when unused for long periods Refer all servicing to a qualified service personnel Servicing is required when the apparatus has been damaged i
16. eck to see if there are any objects between the TV and remote control causing obstruction Are batteries installed with correct polarity Correct remote operating mode set TV VCR etc Install new batteries Is the sleep timer set Check the power connection power may be interrupted No broadcast on the station tuned This is normal the image is muted during the product start up process Please contact a service provider if the picture has not appeared after 5 minutes Adjust the color in Menu option Keep a sufficient distance between the product and the VCR Try another channel the problem may be with the broadcast Are the VIDEO cables installed properly Activate any function to restore the brightness of the picture Horizontal vertical bars orfe Check for local interference such as an electrical picture shaking appliance or power tool Blue screen e Station or cable experiencing problems Tune to another station e Station signal is weak reorient antenna for better reception e Check for sources of possible interference l re e Check the antenna change the direction of the Lines or streaks in pictures antenna OPC PUL Ten ONE DENE Adjust balance in the Menu option speakers 23 No sound and picture The remote control does not work Power suddenly turns off Picture appears slowly after switching on Poor color or picture Poor reception on some channels TROUBLESHOOTING 24 Note Whe
17. ems should be used for complete coverage The ratings are based on the ages of children Overview To ensure complete coverage for all TV programs movies and regular TV shows choose a rating for MPAA from the selections below as well as ratings from the TV Parental Guidelines Rating Systems below using the Age Block option for General Audiences and for children In addition to those you may wish to add additional restrictions from the content block menu and submenus examples below Things to Consider before Setting up Parental Control Determine which rating you consider acceptable to the viewer For example if you choose TV PG more restrictive ratings will be automatically blocked the viewer will not be able to see TV PG TV 14 or TV MA rated programming Do you want to block the auxiliary video source entirely Blocks the signal sent by the equipment such as VCR connected to the TV Audio Video Input Jacks Or leave unblocked then choose allowable ratings Block program Content based on individual parameters such as Strong Dialog Bad Language Sex Scenes Violence Scenes or Fantasy Violent Scenes in Content Blk option Select a secret password in the Set Password option using the numbers keys on the remote control Do not forget the password it is the only way you can access the Parental Control menu and change rating selections or turn Parental Control off Do you want the Parental Control to be active at all times If not
18. ential installation This equipment generates uses and can radiate radio frequency energy and if not installed or used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment to an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Where shielded interface cables have been provided with the product or specified additional components or accessories elsewhere defined to be used with the installation of the product they must be used in order to ensure compliance with FCC regulation SPECIFICATIONS 40 inches diagonally LED F 60 Hz 1080P Up to 1080P 1920 x 1080 16 9 4000 1 180 8ms 30000 hours 176 176 ATSC NTSC VHF UHF Design and specifications are subjects to change without prior
19. f system lock The following options US Canada RRT Setting and Reset RRT will only be accessible when you turn the system lock on TV RATING Press OK button to lock or Tj unlock TV rating Select MPAA rating among N A G PG PG ieee 13 R NC 17 or X Select MPAA rating for English speaking Canada among E C C8 G PG 14 18 Select MPAA rating for Quebec Canada among E G 8 ans 13 ans 16 ans 18 ans Set Rating Region Table Select to reset the RRT setting Clear all lock settings 17 CUSTOMIZING TV SETTINGS arental Control Press the MENU button on the main unit or on the remote control and then press the A V buttons to select LOCK menu Use the 0 9 buttons to input 4 digit password to enter the LOCK menu If used this option feature can block undesirable programming from appearing on the TV Parental Control offers the user a wide variety of options and settings that restrict or block the programming that can appear on the TV Parental Control allows the user the capability of defining which program rating they consider acceptable to the younger more sensitive viewer It can be preset and turned either on or off by the user who specifies the secret 4 number code the password The number of hours blocked are specified General audiences and children blocks should be both programmed into the TV s memory Viewer ratings are specified for both TV and the motion picture Industry both rating syst
20. just the volume PREPARATIONS on 0 CTT TTA MAGA HO USB 5V 500mA o 6 6 lt O PC Audio Input VGA Input DTV TV Input HDMI1 HDMI2 HDMI3 Input COMPONENT Input COAXIAL Digital Audio Output USB Input Headphone Socket Wall Mounting The TV is provided with mounting holes for a VESA approved wall mounting bracket Not Supplied Remove the screws holding the base to the base bracket and lift the base away do not remove the base mounting brackets Mount the VESA bracket using 4 M5 20 isometric threaded screws Not Supplied Do not use screws longer than 20mm damage will occur to the internal parts ON Dp Bepa Your new TV is heavy please consult with professional wallmount installer to perform this installation PREPARATIONS Remote Control Power Button Numeric Buttons Channel Setup Button Picture Mode Button Sound Mode Button Signal Source Button Channel Selection Button CH LIST Button FREEZE Button Up Button Left Button TV Setup Menu Button Stop Button Play Pause Button Rewind Button Pre
21. n any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus has been exposed to rain or moisture does not operate normally or has been dropped Please always connect your television to a power outlet with protective ground connection PREPARATIONS What ts Included TV Set ELEMENT eveewadis NWTELECTRONICS 40 FHD Digital LED TV NSTRUCTION MAN Please read all the instructions carefully before using this TV and keep the munual for future reference User Manual Simple Steps for Connecting Your TV to AIV Devices AN Devices include VCRs DVD piayars Game consoles Gable satelite er set top boxes Your AIV devices may not have all of Quick Start Guide Component TV AV Device 0000 0000 0 0 0 0 A 0000 e lt e z Sa io sof emote Control with Batteries HDMI TV AV Device Input Output i RF Cable Antenna TV AV Device Input Output Composite Tv AV Device Input Output o at vied fo Connect Power Cord and Install Batteries in Remote Control Quick St Program Your TV Press TV if you have universal remote control
22. n or moisture does not operate normally or has been dropped e Please keep the unit in a well ventilated environment WARNING To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture The apparatus should not be exposed to dripping or splashing Objects filled with liquids such as vases should not be placed on apparatus WARNING The batteries shall not be exposed to excessive heat such as sunshine fire or the like WARNING The wall socket plug is used as a disconnect device the disconnect device should be readily accessible WARNING To reduce the risk of electric shock do not remove cover or back as there are no RISQUE CHOC ELECTRIQUE NE qualified personnel DO NOT OPEN A A user serviceable parts inside Refer servicing to RISK OF ELECTRIC SHOCK PAS OUVRIR AVIS This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanvinag the appliance WARNING To avoid any injury caused by lean of the product please always ensure the whole product was placed within the table surface in horizontal
23. n the main unit or on the remote control to INPUT SOURCE display the Input Source list E ComponentiAV E e Press the A V buttons to select your HDMI1 desired input source ME ETE HDMI2 n EA HDMI3 USB and then press OK button to VGA confirm Channel Selection e Press the CH CH buttons on the main unit or on the remote control repeatedly to select the channel e Press the 0 9 buttons on the remote control to select the channel directly USB Press 4 and then press OK button to select channel 4 Press 4 and 5 and then press OK button to select channel 45 Press 1 2 and 3 and then press OK button to select channel 123 Volume Adjustment e Press the VOL buttons on the main unit or on the remote control to adjust the volume e If you wish to switch the sound off press the X MUTE button again or the VOL button to resume the sound 11 CUSTOMIZING TV SETTINGS Navigating the On screen Display e Press the MENU button to display the main menu e Press the A buttons to navigate and select the available menus y Picture fi Lock Channel co Lock y Channel i Picture Channel 12 Picture Mode Contrast Brightness Color Tint Sharpness Color Temp Blue Screen Air Cable Auto Scan Favorite Show Hide Channel No Channle Label DTV Signal Enter Password Move tandar Normal Select si Exit
24. n there is a problem in VGA mode only when VGA mode is applied PROBLEM POSSIBLE SOLUTIONS e Adjust resolution horizontal or vertical frequency The signal is out of range e Check whether the signal cable is connected or loose e Check the input source Vertical bar or strip on the background horizontal noise and incorrect position Screen color is unstable or is a Check the signal cable single color e Reinstall the PC video card Maintenance e Set the auto configure or adjust clock phase or H V position Early malfunction can be prevented Careful and regular cleaning can extend the amount of time you will have with your new TV Be sure to turn the power off and unplug the power cord before you begin any cleaning Clean the screen A great tip to dust off your screen wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent Wring the cloth until it s almost dry and then use to wipe the screen Make sure the excess water is off the screen then let air dry before you turn on the TV Cleaning the cabinet To remove dirt or dust wipe the cabinet with a soft dry line free cloth Please be sure not to use a wet cloth FCC NOTES FE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a resid
25. of the favorite programs 20 USB MULTIMEDIA Listening to Music e Press the SOURCE button on the main unit or on the remote control C MP3 Photo Music then press the A V buttons to select r the USB mode and then press OK U01 1 mp3 gt A button U01 3 mp3 Album U02 1 mp3 e Press the q P buttons to select BitRate 192K MUSIC and then press OK button ae Play File 0 001 005 Total size 3 8 GB Gi File format supported MP3 Unused size 3 7 GB DOE Be OO boo Press the SOURCE button on the main unit or on the remote control C PICTURE Photo Music then press the A V buttons to select SE 2010100 jpg the USB mode and then press OK 2010100 jpg button 2010102 pg 2010103 jpg Press the 4 P gt buttons to select PHOTO and then press OK button ff Play File 0 002 005 1024 x686 229 0KB i f File format supported JPEG l Gi PP Total size 3 8 GB Select a Move Repeat Unused size 3 7 GB You can select a background music to play when you view the photos The music and photo files should be exactly in the same folder Operation Tips Press to speed up forward Press to select different repeat mode 21 TROUBLESHOOTING If your TV does not operate normally or cannot be turned on please check the following troubleshooting questions Remember also to check any other connected electronic device such as DVD or blu ray player to pinpoint the problem If
26. or better quality at Element s option at no charge to the original consumer After the one 1 year Warranty period you must pay for the costs of all parts 3 SHIPPING COSTS Notwithstanding the foregoing the original consumer is responsible for any shipping charges incurred to ship the Product or part s to Element ar to an Element authorized customer service provider for diagnosis repair or replacement To obtain Warranty Service and Troubleshooting information call our toll free customer service line at 1 888 338 5666 Please have your model and serial number available along with your date of purchase You can also visit us online at www elementelectronics com To receive Warranty servic the original consumer purchaser must contact Element for problem determination and service procedures Proof of purchase in the form of a bill of sale or receipted invoice evidencing that the Product is within the applicable Warranty period s MUST be presented to Element or an authorized customer service provider in order to obtain the requested service Exclusions and Limitations This Warranty covers manufacturing defects in materials and workmanship encountered in the normal non commercial use of the Product and does not cover a damage or failure caused by or attributable to abuse misuse failure to follow instructions improper installation or maintenance alteration accident or excess voltage or current b improper or incorrectly performed
27. partment of Energy helping us all save money and protect the environment through energy effici products and practices Home mode Energy Saving is the default as shipped television configuration and settings And Horhe mode Energy Saving is the setting in which the product qualifies for ENERGY STAR Any changes o default as shipped television configuration and settings would change the energy consumption And enabling certain optional features and functionalities may increase energy consumption beyond the limits required for ENERGY STAR qualification as applicable The On MODE Power under Home Mode should be less than 61 4 W The SLEEP MODE Power should be less than 1W e Press Yes to confirm Are you sure you want Home mode in this mode ENERGY STAR saving are realized Select MEN Return Note If you want change the modes between Home Mode Energy Saving and Standard Mode you can change the setting in the Setup Menu under Display Mode 10 OPERATING YOUR TV e Press the gt A V buttons to select your desired mode and press OK button to confirm Air Cable Cable System Auto Scan a p Select menu Return Select your desired language to be displayed on the menu The default on screen menu language is set as English Select antenna between Air and Cable Select Cable system Auto STD IRC HRC Search and store the available channels automatically Selecting the Input Source e Press the SOURCE button o
28. th Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding plug A polarized plug has two blades with one wider than the other A grounding plug has two blades and a third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Protect the power cord from being walked on or pinched particularly at the plugs convenience receptacles and at the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart or rack is used use caution when moving the cart apparatus combination to avoid injury from tip over A e o Unplug the apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified personnel Servicing is required when the apparatus has been damaged in any way such as the power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus or the apparatus has been exposed to rai
29. v Button Forward Button Next Button Tie ef NO Mute Button Return Button Sleep Button MTS Button Information Button Volume Adjust Button AUTO Button ASPECT Button ENTER Button Right Button Down Button EXIT Button Add Erase Button FAV Button REPEAT Button USB Button CC Button V CHIP Button If there is light around the TV the remote control may fail or work abnormally Please remove the batteries from the remote control when not in use for a long period time Actual function for remote control keys prevails To prevent battery leakage which may result in bodily injury or damage to the remote 1 Install all batteries correctly and as marked on the remote control 2 Do not mix old and new batteries and do not mix alkaline standard carbon zinc or rechargeable ni cad ni mh etc batteries PREPARATIONS Remote Control TV Operation TS SLEEP C G Display the present screen information such as the current channel and input source CH Select a channel ASPECT to your preference SOURCE Select among the different input signal sources TV AV Component HDMI1 HDMI2 HDMI3 VGA USB VOL CH LIST AUTO EXIT ADD ERASE FAV Closed Caption selection Off On CC on Mute Set up parental control 093 CE La o P MODE SMODE MS CO CHH VOL FREEZE CHLIST AUTO ASPECT OK MENU EXT ADD ERASE _ FAN USB
Download Pdf Manuals
Related Search