Electrolux EHGT326X User's Manual
Contents
1. in this case approach the burner with a flame push the relevant knob down and turn it anti clockwise until it reaches the maximum position Always turn the flame down or put it out before A taking the pans off the burner Carefully supervise cookings with fats or oil since these types of foodstuff can result ina fire if over heated Energy saving advices To ensure maximum burner efficiency it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used so thatflame will not spread beyond the bottom of the vessel see the table beside It is also advisable as soon as a liquid starts boiling to turn down the flame so that it will barely keep the liquid simmering e Use only pans or pots with flat bottom maximum diameter minimum diameter Rapid Auxiliary Cleaning and Maintenance Disconnect the appliance from the electrical supply before carrying out any cleaning or manteinance work This appliance cannot be cleaned with steam or with a steam cleaning machine Wash the enamelled components with warm soapy water Never use abrasive cleaners Frequently wash the caps and the crowns with hot soapy water carefully taking away any built up of food Carefully wash the stainless steel components with water then wipe them dry with a soft cloth The pan supports are dishwasher proof If the marks are particularly difficult to remove use common non abrasive2. 11 H From the Electrolux Group The world s No 1 choice The Electrolux Group is the world s largest producer of powered appliances for kitchen cleaning and outdoor use More than 55 million Electrolux Group products such as refrigerators cookers washing machines vacuum cleaners chain saws and lawn mowers are sold each year to a value of approx USD 14 billion in more than 150 countries around the world 03 05 Grafiche MDM Forli
3. Always insist on genuine Zanussi spare parts e Ensure that all control knobs are in the OFF position when not in use Should you connect any electrical tool to a plug near this cooking appliance ensure that electric cables are not in contact with it and keep them far enough from the heated parts of this appliance e Ifthe appliance is out of order disconnect it from the electric supply About Installation Cleaning and Manteinance e It is mandatory that all operations required for the installation are carried out by a qualified or competent person in accordance with existing rules and regulations e Disconnect the appliance from the electrical supply before carrying out any cleaning or manteinance work e Ensure a good ventilation around the appliance A poor air supply could cause lack of oxygen e Ensure thatthe gas supply complies with the gas type stated on the identification label placed near the gas supply pipe e The use ofa gas cooking appliance results in the production of heat and moisture in the room in which it is installed Ensure that the kitchen is well ventilated keep natural ventilation holes open or install a mechanical ventilation device mechanical extractor hood e Prolonged intensive use of the appliance may call for additional ventilation for example opening of a window or more effective ventilation for example increasing the level of mechanical ventilation where present e Once youremov
4. Built in Hob INSTRUCTION BOOKLET Mod EHGT326X 35689 5601 HR SI CZ SL RO ENGLISH A For Your Safety These warnings are provided in the interest of safety You must read them carefully before installing or using the appliance Itis mostimportant that this instruction book should be retained with the appliance for future reference Should the appliance be sold or transferred alwavs ensure that the book is left with the appliance in order that the new owner can get to know the functions of the appliance and the relevant warnings During Operation e This appliance has been designed to be operated by adults and children under supervision Voung children MUSTNOT be allowed to tamper with the controls or play near or with the oven e This appliance has been designed for cooking edible foodstuff and to be used for domestic non professional purposes only It must not be used for any other purpose e Itis dangerous to alter the specification in any way e Forhygiene and safety reasons this appliance should be kept clean at all times A build up of fats or other foodstuff could result in a fire e Accessible parts of this appliance may become hot when itis in use Children should be KEPT Away until it has cooled e Undernocircumstances should you attemptto repair the appliance yourself Repairs carried out by unexperienced persons may cause injury or serious malfunctioning Refer to your local Zanussi Service Centre
5. LPG B ttner By pass completely tighten clockwise the screw until a small in 1 100 regular flame is obtained of mm 5 Finally check the flame does not go out when quickly l turning the knob from the maximum position to the Auxiliary minimum position Rapid This procedure can easilv be carriedout anvhow the hob has been positioned or built in the working top Table 2 injectors NORMAL REDUCED NORMAL POWER POWER POWER kW kW NATURAL GAS LPG 630 631 G20 20 mbar 28 30 mbar r Auxiliary small Natural gas Rapid big 3 0 0 65 119 0 286 203 200 LPG 2 8 Building In These hobs can be inserted in a built in kitchen unit whose depth is between 550 and 600 mm The hobs dimensions are shown in Fig 8 Installation and assembly These hobs can be installed in a kitchen unit with an opening for insertion whose dimensions are shown in Fig 9 The edge of the cut out must have a minimum distance from the rear wall of 55 mm If there are side walls or sides of the furniture unit near the hob the cut out edges must have a minimum distance of 100 mm Hanging forniture units or hoods must be placed at 650 mm minimum from the hob Carrv out the building in of the hob as follows 1 Putthe relevant sealings supplied with the hob on the edges of the cut out taking care that the sealings meet without overlapping 2 place the hob in the cut out taking care ofits centring 3 fix the hob with
6. N Safety Instructions Technical Data si ssssiiienzzeiinznneini nennen 6 Instruction for the Installer 6 aa aera epora en Electrical Connection 222220 222000 20000 7 i Hints and Tips ee e N Envronmentalintormation Building eins 9 Description of the appliance 1 Rapid Burner 3 0 kW 2 Auxiliary Burner 1 0 kW 3 Burner Control Knobs Instruction for the User Burner ControlKnobs The hob burner control knobs are situated on the hob front panel The symbols on the knobs mean that e there is no gas supplv KA there is maximum gas supply Ignition setting amp A there is minimum gas supply Lighting the burners For easier lighting proceed before putting a pan on the pan support xO 1 Pushthe relevant knob down and turn it anti clockwise until it reaches the maximum position 2 After lighting the flame keep the knob pushed down forabout5 seconds This will allow the thermocouple Fig 1 lett D to be heated and the safety device tobe switched off otherwise the gas supply would be interrupted 3 Then check the flame is regular and adjust it as required i If you cannot light the flame even after several attempts check the cap Fig 1 lett A and the crown Fig 1 lett B are in the correct position To put the flame out turn the knob to the symbol In the absence of electricity ignition can occur without the electrical device
7. cleaners or specific products Never use steel wool pads or acids In models provided with electric ignition this feature is obtained through a ceramic candle and a metal electrode Fig 1 lett C Keep these components well clean to avoid difficult lighting and check that the burner crown holes lett B are not obstructed Periodic maintenance Periodically ask your local Service Centre to check the conditions of the gas supply pipe and the pressure adjuster if fitted To ensure the good operation of the hob and its safety features it is necessary that the taps are periodically lubricated The periodic lubrication of the taps must be carried out by qualified personnel which you must refer to also in case of malfunctioning Guarantee After Sales Service Original spare parts This appliance before leaving the factory has been tested and studied by many experts and specialists in order to give you the best results Any repair work which needs to be carried out should be done with the utmost care and attention For this reason we reccomend that for any problem you contact the dealer who sold it to you or our nearest authorized Service Centre specifying the nature of the problem and the particular model which you own Original spare parts certified by the manufacturer ofthe product and marked with the following sign AX Electrolux Distriparts can only be found at our approved Technical Assistance Centres and
8. ed all packaging from the appliance ensure that itis not damaged and the electric cable is in perfect conditions Otherwise contact your dealer before proceeding with the installation e The manufacturer disclaims any responsability should all the safety measures not be carried out The symbol Ka the product or on its packaging indicates that this product may notbe treated as household waste Instead it shall be handed over to the applicable collection point forthe recycling of electrical and electronic equipment By ensuring this product is disposed of correctly you will help prevent potential negative consequences for the environment and human health which could otherwise be caused by inappropriate waste handling of this product For more detailed information about recycling of this product please contact your local city office your household waste disposal service or the shop where you purchased the product MANUFACTURER ELECTROLUX HOME PRODUCTSITALY S p A Viale Bologna 298 47100 FORLI Italy These instructions are only for the countries stated by the symbol printed on the front cover of this instruction book Contents Description of the appliance uunnnnnennnnennn 3 Guide to Use the instructions Instruction for the User semen 3 The following symbols will be found in the text to Cleaning and Maintenance s es 4 guide you throughout the Instructions Guarantee After Sales Service 5
9. essure of 20 mbar No regulation is required for use by this tvpe of gas IMPORTANT To ensure a correct operation a saving of energy and the long life of the appliance the voltage pressure of the appliance must correspond to the recommended values Before fitting the appliance ensure that the installation has the correct voltage forthe appliance Atfull capacity the drop in pressure must not exceed 5 Such a drop in pressure is caused by the following parameters maximum capacity of meter diameterand lenghtofthe tube in front and behind the meter section of transit of variuos tubes positioned on the circuit diameter of eventual connections The adjustable connection is fixed to the comprehensive ramp by means of a threaded nut G 1 2 Insert the supplied washer between the ramp and the adjustable connection IMPORTANT When the final connection has been made it is essential that a thorough leak test is carried out on the hob and installation Use some soapy water never a flame Fig 2 FO 2365 A Ramp with ending nut B Washer C Adjustable connection ElectricalConnection The appliance is designed to be connected to 230 V monophase electricity supply The connection must be carried out in compliance with the laws and regulations in force Before the appliance is connected 1 checkthatthe main fuse and the domestic installation can support the load see the rating label 2 check that the p
10. in authorised Spare Parts Shops Technical Data Gas Burners Rating RapidBurner big 3 0 kW G20 2 8 kW G30 G31 Auxiliary Burner small 1 0 kW Class 3 Appliance Category II2H3B P Setting Natural Gas G20 20 mbar Gas connection G 1 2 Electric Supply 230 V 50 Hz Hobrecess dimensions Length 270mm Width 490 mm C This appliance complies with the following E amp S Directives 73 23 90 683 Low Voltage Directive 89 336 Electromagnetical Compatibility Directive 90 396 Gas Appliances 93 68 General Directives and subsequent modifications Instruction for the Installer and maintenance must be carried out by qualified personnel in compliance with the regulation in force i The following instructions about installation The appliance must be electricallv disconnected before all interventions If any electric supplv to the appliance is required to carrv out the work ensure all the necessarv precautions are followed The side walls of the unit in which the hob is going to be installed must not exceed the height of the working top Avoid installing the appliance in the proximitv of inflammable materials e g curtains tea towels etc Gas connection If using flexible metallic pipes be careful they do not come in contact with mobile parts or they are not squeezed Use the same attention when the hob is combinated withanoven This hob is set to operate with natural gas with nominal pr
11. mately 2 cm longer than the phase wires Fig 3 To open the terminal block and reach the terminals proceed as follows 1 insert the point of a screwdriver into the visible protrunding part of the terminal block 2 exert a light pressure and lift Fig 4 Neutral Earth yellow green Fig 3 Fig 4 FO 0257 Fig 5 Adaptation to different types of gas Replacing the burner injectors 1 Removethe pan supports 2 Remove the burner s caps and crowns 3 With a socket spanner 7 unscrew and remove the injectors Fig 6 and replace them with the ones required for the tvpe of gas in use see Table 2 4 Reassemble the parts following the same procedure backwards 5 Replace the rating label placed near the gas supplv pipe with the relevant one for the new tvpe of gas Fig 6 170 supply You can find this label in the package of the injectors supplied with the appliance Should the feeding gas pressure be different or variable compared with the required pressure an appropriate pressure adjuster must be fitted on the gas supply pipe in compliance with the rules in force Adjusting the minimum level To adjust the minimum level of the burners proceed as follows 1 Lightthe burner By pass screw Turn the knob on the minimum position 2 3 Removetheknob Table 1 BY pass diameters 4 With a thin screwdriver adjust the by pass screw see Fig 7 If changing from natural gas to
12. ower supply is properly earthed in compliance with the current rules 3 check the socket or the double pole switch used for the electrical connection can be easily reached with the appliance built in the forniture unit The appliance is supplied with a connection cable This has to be provided with a proper plug able to support the load marked on the identification plate To connect the plug to the cable follow the recommendation given in Fig 3 The plug has to be fitted in a proper socket If connecting the appliance directly to the electric system it is necessary that you install a double pole switch between the appliance and the electricity supply with a minimum gap of 3 mm between the switch contacts and ofa type suitable for the required load in compliance with the current rules The connection cable has to be placed in order that in each part itcannot reach a temperature 90 C higherthan the room temperature The brown coloured phase cable fitted in the terminal block contact marked with L mustalways be connected to the network phase Replacement of the connection cable The connection of the connection cable to the appliance s terminal block is of type Y This means that its replacement requires the specific equipment of a technician In this case only cable type HO5V2V2 F T90 must be used The cable section must be suitable to the voltage and the working temperature The yellow green earth wire must be approxi
13. the relevant screws Fig 10 The traction of the screws is able to trace the sealing any excess of which can then be easily removed If several 30cm hob are to be installed side by side i into the same cut out an assembly kit including a support side bracket and supplementary sealings is available at our After Sales Centres The relevant installation instructions are supplied within the kit package FO 0199 a sealing Fig 10 Possibilities for insertion Kitchen unit with door Proper arrangements must be taken in designing the forniture unit in order to avoid any contact with the bottom of the hob which can be heated when it is operated The recommended solution is shown in Fig 11 The panel fitted under the hob should be easily removable to allow an easy access if a technical assistance intervention is needed Kitchen unit with oven The hob recess dimensions must comply the indication given in Fig 9 and must be provided with brackets to allow a continuous supply of air To avoid overhating the building in should be carried out as shown in Figs 12 and 13 The hob s electric connection and the oven s one must be carried out separately both for safety reasons and to allow the oven to be easily taken off the unit aea aga gt gt fo ene i A ja H A FO 2041 FO 2042 a Removable panel b Space possibly useful for connections 10
Download Pdf Manuals
Related Search