EdgeStar AP12000HS User's Manual
Contents
1. nennen 13 ENERGY SAVING GUIDE eege eer 14 MAINTENANCE ees 15 CLEANING THE INS eene dee wee emend 15 CLEANING THE 15 PREPARATION FOR STORAGE 15 TROUBLESHOOTING 5 2 crai neue Donne tide nee rua san ea ned 16 TROUBLESHOOTING CONTINUED ies nennen nnns nnns 17 SPECIFICATIONS 5 ed See EES Eege 18 EDGESTAR LIMITED WARRANTY 19 EdgeStar Portable Air Conditioner ii Introduction Thank you for purchasing this EdgeStar portable air conditioner We are glad you chose us We believe that your purchase of this product opens a relationship between you and EdgeStar We will provide the customer support needed to nurture that relationship This manual contains important information regarding the proper installation use and maintenance of your portable air conditioner Following this manual will ensure that your product will work at its peak performance and efficiency Please save the original product packaging in case you need to safely transport your portable air conditioner For Your Records Please write down the model number and serial number below for future reference Both numbers are located on the r2. 4 PREPARATIONS FOR INSTALLING THE WINDOW KIT 4 INSTALLING THE GRATED 1 nsi 5 INSTALLING THE WINDOW tenens 6 ATTACHING THE DUCT CONNECTORS TO THE EXHAUST 7 CONNECTING THE DUCT CONNECTOR TO THE UNITA 8 CONNECTING THE DUCT CONNECTOR TO THE GRATED ADAPTER 8 NOTES ABOUT THE EXHAUST HOSE e Retro 9 CONTROL PANEL 10 OPERATING THE CONTROL PANEL 11 EE EE 11 AUTO BESTART ec testes 11 COOLING MODE mm 11 DEHUMIDIEYING ERE sete ong 11 REAT MODE eL 11 PAN ONEY MODE seas EET 12 DIM EE 12 MEE 12 How to set the unit to automatically turn on 12 How to set the unit to automatically turn oft 12 Ne PUBLIER 12 ud 12 USING THE REMOTE 13 INSTALLING THE BATTERIES EE 13 REPLACING THE BATTERIES
3. SEageStar Portable Air Conditioner AP12000HS Owner s Manual Important Safety Information Improper handling can cause serious damage to the appliance and or to the user This portable air conditioner is not intended for use by children Children should be supervised to ensure that they do not play with this product Electrical Safety This unit is designed for indoor use only Do not use the unit in extremely humid or wet environments Do not wet the housing or control panel Do not pull the unit by the cord Always turn the unit off and unplug it from the socket when cleaning Unplug the unit if it is not going to be used for a long period of time Do not operate the unit with a damaged plug or a loose socket Use only the correct power supply with appropriate amperage If the power cord is damaged it must be replaced by the manufacturer a service agent or qualified technician Do not remove any part of the casing unless instructed by an authorized technician General Safety This portable air conditioner is not intended to be used by children Do not allow children to play with the controls or drop any objects into the air outlets or vents Do not place objects or let any person sit on top of the unit Only use in the upright position on a flat level surface and provide at least 20 inches of clearance from any walls o
4. Minimize the amount of humidity in the room For example run the unit as a dehumidifier To prolong the compressor s life please wait at least 3 minutes before turning the unit back on after shutting it off Inspect and keep the pre filters clean by cleaning regularly Inspect and replace the activated carbon filters regularly Perform routine maintenance 14 Cleaning the unit Cleaning the pre filter NOTE The activated carbon filter is not washable You should replace it every 2 3 months or as needed Contact EdgeStar retailers for replacement filters Preparation for Storage 15 Maintenance Clean the air conditioner and filters regularly to maximize performance and efficiency and prolong the unit s life Be sure to always unplug the air conditioner from the power outlet before cleaning Use a soft dry cloth to wipe the body clean If necessary use lukewarm water to dampen a cloth to clean the unit Use a soft bristle brush to clean between the vents Carefully use a vacuum cleaner to clean the condenser coils Never use abrasive chemicals volatile substances gasoline detergents chemically treated cloths or other cleaning solvents that may damage the cabinet exterior Never spray water directly on the unit To clean the pre filter follow the steps below 1 Power off the unit and remove the pre filter 2 Remove the activated carbon filter 3 Use a vacuum cleaner or tap the filter lightly to remov
5. includes a window exhaust kit that can be used to vent the unit out a window Before you begin make sure you have all the parts necessary for installation Window Kit Parts List 4 Screws 1 Grated Adapter 1 Exhaust Cover 1 Exhaust Hose 1 Window Kit Plate with Hole 1 Window Kit Plate If you have multiple windows choose one that is near an electrical outlet that will be able to provide sufficient power to your unit See the power requirements listed on the product label printed on the side or on the back of your portable air conditioner Your window kit can be installed on a horizontal or vertical sliding window as shown in the following pictures UN 9 Follow the instructions on the next pages to install the window kit EdgeStar Portable Air Conditioner Installing the grated adapter 1 Insert the round grated adapter through the back grooved side of the window kit plate with hole 2 Secure the grated adapter by fastening the screws from flat side of the window kit plate to the holes on the grated adapter Installing the window plates 3 Open your window and place the window kit with grooved side facing outward on the window sill Then slide the window kit plate to fit the width of the window You can use screws to secure the window kit plate from sliding 4 Lower the wi
6. the portable air conditioner on and off By default when you first use the power button the unit will begin to operate in cooling mode The unit will remember the last used mode settings if you shut down and restart Auto Restart power to the unit is interrupted the air conditioner will restart itself in its last used mode settings once power is restored The compressor will restart after 3 minutes Cooling Mode Cooling mode cools and dehumidifies the air If the ambient temperature drops below the temperature you selected the compressor turns off and the unit functions with the fan only When the temperature rises above the temperature you selected the compressor turns on again To operate the unit in cooling mode 1 Make sure the power cord is plugged into a power outlet 2 Press the Power button NOTE The exhaust hose 3 Press the Mode button until the LED indicator next to Cooling lights up 4 Select the fan speed by using the Speed button 5 Set the thermostat by using the Up and Down buttons The thermostat is adjustable between 61 F 89 F in one degree increments must be used in Cooling mode in order to cool a room During the Dehumidifying mode the unit will condense water out of the air and exhaust it through the exhaust hose The ambient temperature in the room will probably drop by a few degrees while using the Dehumidifying mode Dehumidifying Mode To operate the unit in dehumidifying mo
7. atings label on the back of your unit and are needed to obtain warranty service You may also want to staple your receipt to this manual as it is the proof of your purchase and is also needed for service under your warranty Model Number Serial Number Date of Purchase To better serve you please do the following before contacting customer service If you received a damaged product immediately contact the dealer that sold you the product Read and follow this instruction manual carefully to help you install use and maintain your portable air conditioner Read the troubleshooting section of this manual as it will help you diagnose and solve common issues Visit us on the web at http www edgestar com for product guides additional troubleshooting resources and up to date information If you need service our friendly customer service representatives are available via email at service edgestar com or by telephone at 1 866 319 5473 Parts Identification Front View Control Panel Front Air Vent Caster Back View Pre filter Air Intake Exhaust Outlet Power Cord Drain Valve EdgeStar Portable Air Conditioner CAUTION Never operate the air conditioner without the pre filter attached Pre filter Installing the Carbon Filter Your portable air conditioner ships with a pre filter and an activated ca
8. ce EdgeStar Portable Air Conditioner 16 NOTE If the ambient temperature is above 90 F the unit may not blow cold alr TIP Run the unit before it is needed For example run the unit in the morning before the area gets hot and continue to run the unit all day long in order to maintain a low temperature 17 Troubleshooting continued Issue Possible Cause Solution My air conditioner is not cooling at all Unit is not operating in cooling mode Set the unit to be in cooling mode and lower the set temperature pg 11 The compressor is not on The compressor may take up to 3 minutes to turn on or longer if it is too warm The ambient temperature is too high Lower the room temperature to be below 90 F degrees The filter may be dusty or blocked Clean the filters pg 15 Blocked exhaust port Remove any obstructions in the exhaust hose and port My air conditioner blows cold air but does not lower the room temperature The unit is not vented The unit must be vented pg 4 The area of the room is too large Minimize the size of the area to be cooled i e adding a drop ceiling Use more than one unit to cool the area or use a larger unit Open windows and doors Close any open doors and windows Too many heat sources Remove or shut off additional heat sources such as radio equipment servers etc The
9. d If no indicator lights turn on contact customer service My remote control does not work and the indicator light on remote does not turn on Batteries not installed Install new batteries Batteries installed incorrectly Bad batteries Replace the batteries Reinstall the batteries correctly A defective remote control Contact customer service My air conditioner is making a loud noise The unit is not level Make sure the unit is on a level surface A foreign object has jammed the fan Remove the object from the fan The floor below the unit is uneven Move the unit to a level surface My air conditioner is making a continuous metallic knocking or pinging sound Unit may have been shipped on its side Shut off the unit Let the unit sit on a level surface for at least 24 hours and restart Damaged compressor Contact customer service My air conditioner is leaking Drain plug is removed Attach the drain plug Cracked base pan Contact customer service My air conditioner runs for a little while and then it trips the power cord or the circuit breaker The air conditioner may be plugged into an outlet that can not supply the correct amount of current Contact an electrician if the unit works in a different room or circuit The control panel lights blink randomly Unit may have a faulty control panel Contact customer servi
10. de 1 Make sure the power cord is plugged into a power outlet 2 Press the Power button 3 Press the Mode button until the LED indicator next to Dehumidify lights up NOTES If the room temperature is below 77 F the fan will always run on low speed while in the Dehumidifying mode If you do not use the exhaust hose in Dehumidifying mode you must manually drain the water from the unit Additionally the ambient temperature in the room will probably rise by a few degrees if you do not use the exhaust hose You will be not be able to change the thermostat temperature while in Dehumidifying Mode Heat Mode Your air conditioner can work as a heat pump It must be vented for it to expel the cold air out the exhaust To operate the unit in heat mode 1 Make sure the power cord is plugged into a power outlet 2 Press the Power button 3 Press the Mode button until the LED indicator next to Fan lights up red The thermostat is adjustable between 61 F 77 F 11 Fan Only Mode NOTE Fan Only mode does not require that the exhaust hose be attached Speed Timer NOTE To cancel the timer press the Timer button or Power button LCD Display Water Light Fan Only mode is used to circulate the air in your room No temperature setting is needed To operate the unit in Fan Only mode 1 Make sure the power cord is plugged into a power outlet 2 Press the Power button 3 Press the Mode but
11. e only downhill Control Panel Overview EdgeStar Portable Air Conditioner Indicator Lights OWATER Only OLow EdgeStar e LCD Display a a Cooling High Dehumidify Medium Power Button Mode Button Speed Button O Timer Butt Up Button n Down Button Infrared Sensor Button Function Power Powers the unit on or off Mode Changes between cool dehumidify heat and fan modes The indicator light will turn on next to the mode you set Heating mode will have a red indicator light Speed Sets the fan speed The High Medium or Low indicator light will turn on next to the fan speed you set Timer Used to enable the timer Up Increases the set temperature or the time when the Timer button is enabled 2 Down Decreases the set temperature or time when the Timer button is enabled Indicator Function Water Light The water light will turn on if the unit has filled the internal water reservoir Timer Light The timer light indicates you have set the timer Use the Up and Down buttons to set the number of hours LCD Display The LCD can display the ambient temperature set temperature and the number of hours when setting the timer Infrared Receiver for the remote control Sensor 10 Operating the Control Panel Power Use the Power button to turn
12. e defective product with a new refurbished or remanufactured product If a product is replaced it will carry the remaining warranty of the original product After the ninety 90 day period EdgeStar will no longer be responsible for labor charges incurred All defective products and parts covered by this warranty will be repaired or replaced on a mail in basis to an EdgeStar authorized repair facility PARTS For a period of ONE 1 YEAR from the date of original purchase EdgeStar will supply new rebuilt or refurbished parts free of charge EdgeStar may request a defective part be returned in exchange for the replacement part All replacement parts or products will be new remanufactured or refurbished All products and parts replaced by EdgeStar under warranty service become the property of EdgeStar This warranty applies to the original purchaser only and only covers defects in workmanship experienced during operation of the product under normal service maintenance and usage conditions This warranty applies to the purchase and use of this product in residential settings within the United States of America WHAT IS NOT COVERED The following limitations apply to the coverage of this warranty This warranty does not cover e Labor charges for installation setup or training to use the product e Shipping damage and any damage caused by improper packaging for shipment to an authorized service center and any damaged caused by improper voltage
13. e loose dust and dirt then rinse thoroughly under lukewarm running water below 104 F You may use a mild soap and water solution if needed Allow the pre filter to air dry in a cool and shaded place Dry thoroughly before reinstalling Clean the pre filter periodically If the unit is used in a dusty environment you may need to clean it on a weekly basis Warning Never operate the unit without the filters If you are not going to be using the unit for an extended period of time follow the instructions below before storing your unit 1 Drain all the water from the unit s reservoir Operate the unit in fan mode for a few hours to thoroughly dry any moisture left on the coils inside the unit 2 Power off the unit and clean or change the filters 3 Unplug and carefully wind the power cord 4 Remove the exhaust hose and duct connectors and keep them in a safe place Troubleshooting Follow the troubleshooting guide below to resolve common issues Issue Possible Cause Solution My air conditioner is Unit is not receiving Make sure the unit is not functioning at all power plugged in LCDI power cord is tripped Press the Reset button on the LCDI cord Insufficient power Move the unit to another outlet Check your circuit breaker Refer to the rating label on the back of the unit to determine the Amperage draw Water reservoir is full Drain the unit and restart Control panel is disconnecte
14. er s manuals access additional troubleshooting resources and obtain more information on other great EdgeStar products on the web at http www edgestar com Product contents and specifications may change without notice Copyright 2009 Living Direct Inc
15. in the correct direction 3 Slide the cover back on CAUTION Use only AAA batteries Remove the batteries if the remote control will not be used for one month or longer Do not attempt to recharge batteries not designed to be recharged All batteries should be replaced at the same time Do not mix old and new batteries Do not dispose of batteries in a fire as they may explode 13 Energy Saving Guide Read and follow the guide below to get the best performance and efficiency from your portable air conditioner EdgeStar Portable Air Conditioner Do not cover the air outlet exhaust while in use Do not place the unit in front of curtains or drapes to ensure they do not obstruct the air intake Minimize the length of the exhaust hose Make sure the exhaust hose is as straight as possible and avoid kinks or bends Keep curtains blinds or drapes closed during the sunniest part of the day Use the timer to operate the unit before it is needed For example set the timer to turn on the unit in cooling mode for 3 or more hours to cool the room before you arrive You may want to operate the unit all day if you live in a warmer climate Minimize the heat sources direct sunlight computers servers people etc in the room Close all windows and doors Use the unit in a contained room For example a room with four walls and a ceiling instead of a partitioned studio or warehouse Make sure the unit is on a level surface
16. ndow to secure the window kit in place You may need to use duct tape to better secure the window kit CAUTION Secure your window by using window locks Please contact your dealer to purchase window locks EdgeStar Portable Air Conditioner Attaching the duct connectors to the exhaust hose 5 Attach the connectors to the hose A Extend the ends of the exhaust hose B Thread the duct connector on by turning it clockwise until it stops 6 Roll the unit towards the window kit Leave a space that is at least 20 inches to the wall Connecting the duct connector to the unit 7 Align the slots on the duct connector to the tabs and snap into the back of the unit Connecting the duct connector to the grated adapter 8 Align the slots on the duct connector to the tabs on the grated adapter and snap in place After you have installed the exhaust hose and window kit you can plug in your portable air conditioner and start using it EdgeStar Portable Air Conditioner Notes about the Exhaust hose Your portable air conditioner is designed to exhaust condensate water that is collected from the air This water in either gaseous or droplet form will be expelled out the exhaust port of the unit Please take this into account when deciding how to vent it 1 The exhaust hose supplied with the portable air conditioner can be extended u
17. or any other misuse including abnormal service handling or usage Cosmetic damage such as scratches and dents Normal wear and tear on parts or replacement of parts designed to be replaced e g filters cartridges batteries Service trips to deliver pick up or repair install the product or to instruct in proper usage of the product Damages or operating problems resulting from misuse abuse operation outside environmental specifications uses contrary to instructions provided in the owner s manual accidents acts of God vermin fire flood improper installation unauthorized service maintenance negligence unauthorized installation or modification or commercial use Labor charges incurred 91 days or more after the date of original purchase The use of EdgeStar products in commercial settings Optional accessories attachments and appearance items Products that have been modified to perform outside of specifications without the prior written permission of EdgeStar Products lost in shipment or theft Products sold AS IS or from an unauthorized reseller Products that have had their serial numbers removed or defaced Products with serial numbers that have been invalidated OBTAINING WARRANTY SERVICE If you believe your product is defective contact EdgeStar Customer Support for troubleshooting assistance and warranty service at 1 866 319 5473 Please have your serial number and proof of purchase available Once an EdgeStar authorized rep
18. p to 48 inches however for maximum efficiency use the shortest length possible 2 Try to prevent any kinks or bends in the exhaust hose Kinks or bends may trap exhaust air which can radiate heat into the room or potentially cause the portable air conditioner to overheat and shut itself off 3 The exhaust hose supplied with the portable air conditioner has been specifically designed for this air conditioner Do not lengthen the hose by adding additional hoses or attachments or replace it with any other hose Do not lengthen the exhaust hose by adding additional hoses attachments Warning Longer hoses are not recommended Draining the Unit When the portable air conditioner is in cooling mode dehumidify mode or heating mode it will remove moisture from the air The condensed water from the air will be collected in an internal reservoir and will be evaporated and exhausted out of the exhaust hose However in very humid conditions the internal reservoir may fill completely This causes the air conditioner to turn off to avoid overflowing the internal reservoir The WATER indicator will light up on the Control Panel Direct drainage 1 Remove the rubber drain plug from the drain port 2 Connect a drain hose to the drain port The portable air conditioner will now drain through the drain hose Please note that this unit has no drain pump all water will drain with gravity only i
19. r objects Route the power cord carefully to avoid a tripping hazard This unit is intended for domestic use only Do not use the portable air conditioner for industrial or commercial use Any other use may invalidate the warranty Your portable air conditioner is supplied with a Leakage Current Detection and Interruption LCDI safety plug This device provides protection to reduce the risk of fire due to arcing faults in the power supply cord Before using your portable air conditioner follow the instructions below to ensure that the LCDI plug is working properly 1 Plug the power cord to a grounded outlet 2 Press the TEST button on the LCDI plug This should trip the plug and cut the power to the air conditioner If the plug does not trip and you are able to turn on the unit please contact EdgeStar support DO NOT USE YOUR PORTABLE AIR CONDITIONER IF THE TEST FAILS Press the RESET button to start using your air conditioner Do not use the TEST and RESET buttons as an ON OFF switch Table of Contents IMPORTANT SAFETY INTRODUCTION EEN 1 PARTS IDENTIFICATION 2000 annnm 2 BACK VIEW arusi aiea SEENEN AEN EEN 2 gueule ES 2 INSTALLING THE CARBON nnne 3 WINDOW KIT INSTALLATION 6
20. rbon filter The carbon filter will help remove contaminates and odors from the air It is recommended you replace the carbon filter every two to three months or as needed It is necessary to clean the pre filter periodically Follow the steps below to install the carbon filter Ai gt BRA RY AOR S NRI Ne s RRR NRA NR ANSA TAN S ORONO SKY A ANA KY d SAM ANNE AAA NANAK RY REX AKRON ME NO Activated d O X OXY DON APR SA p VONNIA f carbon filter ANSA MNA MINNS NS S S E AXA RRR RIE INR RANKIN RA RANA RRO RY Or d L A ANN OK ROKK OE XX RR RIKEN di ARM NY OOO AK A SXRD d d Wi d OR OG 2 Separate the filter frame from the pre filter 3 Place the activated carbon filter on the pre filter 4 Reattach the filter frame 5 Insert the assembled pre filter into the back of the unit Preparations for installing the window kit NOTE Exhaust Covers may be attached to the Grated Adapters You may need to twist and pull apart to separate them NOTE You may need to contact your electrician if your room s circuit is not able to power your unit Window Kit Installation Instructions You must vent your portable air conditioner when running in it cooling mode Your unit
21. re is from 0 to 99 Temperatures above 99 will be displayed as Hi and temperatures below 0 will be displayed as Lo If you enabled the Timer the LCD Display will show the hour s set In high humidity situations the internal water reservoir may fill The unit will automatically shut off and the water light will turn on Once the water is manually drained the unit will operate normally EdgeStar Portable Air Conditioner 12 Using the Remote Control The remote control can be used instead of the control panel to remotely operate your portable air conditioner The functions on the remote are the same as on the control panel Power Button Mode Button Speed Button Up and Down Timer Button Buttons NOTES Be careful not drop the remote control Do not place the remote control in a location exposed to direct sunlight Button Function Power Powers the unit on or off Mode Changes between cool dehumidify heat and fan modes Speed Sets the fan speed between high medium or low Timer Used to enable the timer Up Increases the set temperature or the time when the Timer button is enabled 2 Down Decreases the set temperature or time when the Timer button is enabled Installing the batteries A 1 Remove the cover on the back of the remote control 2 Insert the batteries with the and ends pointing
22. resentative has confirmed that your product is defective and eligible for warranty service the product must be returned to an EdgeStar repair facility The purchaser is solely responsible for prepaying all shipping related costs to and from the repair facility EdgeStar is not responsible for damage resulting from shipper mishandling or improper packaging Do not return a defective product to the place of purchase Products received without a return authorization number will be refused THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE TO THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW IT IS LIMITED IN DURATION TO THE EXPRESS WARRANTY PERIOD ABOVE NEITHER THE MANUFACTURER NOR ITS DISTRIBUTORS SHALL BE LIABLE FOR ANY INCIDENTAL CONSEQUENTIAL INDIRECT SPECIAL OR PUNITIVE DAMAGES OF ANY NATURE INCLUDING WITHOUT LIMITATION LOST REVENUES OR PROFITS OR ANY OTHER DAMAGE WHETHER BASED IN CONTRACT TORT OR OTHERWISE SOME STATES DO NOT ALLOW THE EXCLUSION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE EXCLUSION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE 19 sEdgeStar EdgeStar Products Box 81336 Austin TX 78708 1336 Toll Free 1 866 319 5473 Web http www edgestar com E mail service edgestar com Register your product download own
23. room garage may be inadequately insulated Properly insulate the room to be cooled i e using fiberglass The ambient temperature is too high The unit may not work if the room temperature is above 90 F Direct sunlight is heating the room Close curtains or pull down blinds and minimize the direct sunlight into the room The filter may be dusty or blocked Clean the filter and replace it if needed Dirty condenser coils Carefully vacuum the coils clean Obstructed air intake or exhaust ports Remove anything blocking the ports Specifications Description of product Portable Air Conditioner Model AP12000HS Voltage Frequency AC 115V 60Hz Input Power 950W Current 8 0A Color Silver Dehumidifying capacity 81 Pints Day Coolant R22 Timer 12 Hour Dimensions 17 1 10 30 9 10 x15 WxHxD Weight 66 Ibs EdgeStar Portable Air Conditioner 18 EdgeStar Limited Warranty One 1 Year Parts amp Ninety 90 Days Labor This product is warranted by EdgeStar to be free from defective workmanship and materials subject to any conditions set forth as follows WHAT IS COVERED LABOR For a period of NINETY 90 DAYS from the date of original purchase labor will be performed free of charge at an authorized EdgeStar repair facility At its option EdgeStar will repair the product with new or remanufactured parts or exchange th
24. ton until the LED indicator next to Fan Only lights up 4 Press the Speed button to select the fan speed You can choose between High Medium and Low The LED indicator next to the speed will light up The Speed button is used to change the fan speed while in Cooling and Fan Only modes Press the Speed button to select the fan speed The LED indicator light next to the High Medium or Low will light up The timer can be used to either turn the unit on or off after a number of elapsed hours The timer is adjustable between 1 12 hours in one hour increments How to set the unit to automatically turn on 1 Press the Timer button while the unit is powered off The Timer indicator LED will light up 2 Use the Up and Down buttons to set the time displayed in hours After the selected time passes the unit will automatically turn on How to set the unit to automatically turn off 1 Press the Timer button while the unit is powered on The Timer indicator LED will light up 2 Use the Up and Down buttons to set the time displayed in hours The unit will automatically turn off after the selected time elapses The LCD Display will show the ambient temperature by default Pressing the Up and Down buttons will show the set temperature for 15 seconds and then revert to the room temperature You can switch between Fahrenheit and Celsius by pressing both the Up and Down Buttons simultaneously The displayed range of the ambient temperatu
Download Pdf Manuals
Related Search