Dynex dynex dx-hd302513 User's Manual
Contents
1. Caution Doing this will erase any existing data on the drive If the drive is damaged and you wish to recover the data continuing WILL overwrite the existing information If using a new hard drive have you formatted and partitioned the hard drive If not see Partitioning and formatting a new hard drive on page xx If the hard drive is not formatted and partitioned your PC will not assign a drive letter There are some computers that have difficulty starting with a USB hard drive connected Unplug the hard drive then restart your computer Once started connect the hard drive Do not use non powered USB hubs because they often are unable to provide enough power Make sure the hard drive has been initialized and partitioned if using a new hard drive If you need to do this see Partitioning and formatting a new hard drive on page 5 If you have Windows 7 you may not have rights to the files and folders and may need to take Ownership of these files and folders Go to http support microsoft com kb 2623670 for more information Your system may be operating at USB 2 0 speeds due to an incorrect driver installation of the USB 3 0 adapter card Or you may have a system that does not support USB 3 0 If your system includes a PCle slot you can achieve SuperSpeed USB transfer rates by installing a USB 3 0 PCle adapter card Make sure the enclosure is connected to a USB 3 0 or 2 0 port Transfer speeds are optimal best with y2. If you purchased the Product from an online web site mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging To obtain in home warranty service for a television with a screen 25 inches or larger call 1 888 BESTBUY Call agents will diagnose and correct the issue over the phone or will have an Dynex approved repair person dispatched to your home Where is the warranty valid This warranty is valid only to the original purchaser of the Product in the United States Canada and Mexico What does the warranty not cover This warranty does not cover Customer instruction Installation Set up adjustments e Cosmetic damage Damage due to acts of God such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product Plasma display panel damaged by static non moving images applied for lengthy periods burn in This warranty also does not cover Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Dynex to service the Product Products sold as is or with all faults e Consumables such as fuses or batteries Products where the factory applied serial number has been altered or remov
3. 800 305 2204 Distributed by Best Buy Purchasing LLC 7601 Penn Ave South Richfield MN 55423 U S A 2012 BBY Solutions Inc All rights reserved DYNEX is a trademark of BBY Solutions Inc Registered in some countries All other products and brand names are trademarks of their respective owners 12 0295 ENGLISH
4. One 2 5 SATA hard drive PC or Macintosh computer with an available USB 3 0 port You can connect to a USB 2 0 port but it will only run at USB 2 0 speeds Supports Microsoft Windows XP Windows Vista and Windows 7 Operating systems Supports Mac OS X version 10 4 or higher operating system USB 2 0 only DX HD302513 3 a WAi O For best performance and reliability install the latest updates and service packs SP for Windows go to the Start menu and select Windows Update Features e Provides a USB 3 0 interface compatible with prior USB 2 0 and 1 1 standards Supports 2 5 SATA interface hard drive max height 0 374 in 9 5 mm A power data active indicator e Rapid heat dissipation Supports Plug and Play and is hot swappable e Patented strong aluminum design e Simple to set up and easy to use Package contents USB 3 0 2 5 SATA hard drive enclosure e Hi speed USB 3 0 A to Micro B cable e Quick Setup Guide e Screwdriver Front of o COCO 1 Status indicator Turns on when the hard drive is on blue Blinks when the hard drive is active Connect a USB cable to this port and to your 2 USB 2 0 port computer Setting up your hard drive enclosure Read the safety precautions before you install your hard drive in the enclosure Use only the accessories provided Make sure that you first touch an unpainted grounded metal object to discharge any static electric
5. does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced technician for help FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user s authority to operate this equipment Canada ICES 003 statement This Class B digital apparatus complies with Canadian ICES 003 This eguipment complies with the applicable technical standards of ICES 003 1997 in accordance with the measurement procedures specified in CISPR22 96 8 DX HD302513 Legal notices KEE ee Legal notices EE One year limited warranty Dynex Products Dynex warrants to you the original purchaser of this new DX HD302513 Product that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one 1 year from the date of your purchase of the Product Warranty Period This Product must be purchased from an authorized dealer of Dynex brand Products and packaged with this warranty statement This warranty d
6. DYNE USB 3 0 2 5 SATA HDD Enclosure DX HD302513 USER GUIDE DX HD302513 USB 3 0 2 5 SATA HDD Enclosure Safety information Aakeri ee EN ee RER 3 Important safety instructions 3 System requirements ess sses 3 FEES yes di o instaurant 3 Package COMA ann tea PANA AA 3 FONT asociada iria 3 Setting up your hard drive enclosure 3 Installing your hard drive in the enclosure 4 Connecting the enclosure to your computer 4 Disconnecting the enclosure from your computer 4 Partitioning and formatting a new hard drive 5 Troubles ODA si echo es 6 SDECITICATIONS 4 es sas k ed kasu kaa vesta kaka kenad 6 Es A nn kina ue 7 One year limited warranty 9 Introduction Introduction Congratulations on the purchase of your new Dynex DX HD302513 external hard drive enclosure kit You can install a 2 5 SATA hard drive HDD by installing it into the enclosure and enjoy the benefits of a portable external hard disk drive Safety information Warning To reduce the risk of fire or electric shock do not expose this device to rain or moisture This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your hard drive enclosure Important safety instructions This hard drive en
7. closure is to be used in temperatures of 41 95 F 5 35 C Temperatures exceeding these limits may damage your hard drive or the enclosure Avoid heat sources or direct sunlight e This hard drive enclosure can be stored in a humidity range of between 10 and 90 and can be operated in a humidity range of between 5 and 80 Do not connect the hard drive enclosure to your computer without taking precautions to avoid electrostatic discharge or short circuits which could damage the hard drive enclosure or your computer Do not place this hard drive enclosure close to a source of strong magnetic fields such as a computer screen TV radio or speaker Strong magnetic fields can affect the reliability of data transfer to and from the hard drive enclosure Do not place anything heavy on top of the hard drive enclosure Use only the accessories provided in the accessory package Before you install or use the hard drive enclosure read the user manual and assemble the enclosure carefully To prevent short circuits do not leave any metal objects inside the enclosure when installing the hard drive To prevent short circuits do not use the hard drive enclosure close to water rain or high humidity CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your hard drive enclosure System requirements
8. ed DX HD302513 9 REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Contact Dynex For customer service please call 1 800 305 2204 www dynexproducts com Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield Minnesota U S A 55423 3645 2012 BBY Solutions Inc All rights reserved DYNEX is a trademark of BBY Solutions Inc Registered in some countries All other products and brand names are trademarks of their respective owners a ON ae TM www dynexproducts com
9. ess is complete locate your hard drive in the bottom right pane Right click on the area with a status bar to the right of the New Simple Volume area then click New Partition 5 Continue following the wizard s directions The recommended partition type is primary and the recommended file system is NTFS Note that Windows XP limits FAT32 partitions to only 32GB You should now be able to see the drive in Windows Explorer Formatting the hard drive on your PC Caution Formatting is only required for a new hard drive Do not format a drive that contains valuable data that you want to save To format the hard drive on your PC 1 Click Start then click Control Panel 2 Click Performance and Maintenance in Windows 7 click System and Security then click Administrative Tools 3 Click Computer Management then click Disk Management from the menu on the left side of the screen 4 Click on the new drive identifiable by the model number or drive capacity then click on the Action tab at the top of the screen 5 Goto All Tasks then click Format from the menu 6 Select the file system and other choices you want then click OK Formatting the hard drive in Mac OS x Creating a new partition in Mac OS X 10 4 or higher If you are using a new hard drive you may need to initialize it first Initialize your new hard drive using Drive Setup from the Mac 0S CD that came with your computer To initialize a Hard Drive 1 Star
10. fit correctly into the enclosure Make sure your drive does not have any additional rails or mounting hardware connected to it Specifications Device interface Dimensions WxLxH Host interface Power supply Hard drives supported Operating temperature Operating humidity Certification SATA 5 4 x 3 1 x 0 6 inches 137 2 x 78 7 x 15 2 mm USB 3 0 Micro B type USB power 1 TB 2 5 SATA interface hard drive max height 0 374 in 9 5 mm Operating 32 104 F 0 40 C 20 to 80 non condensing FCC Class B ICES 003 Legal notices DX HD302513 7 EE Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired Operation This equipment has been tested and found to comply within the limits for a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment
11. ick STOP Setting up your hard drive enclosure DX HD302513 5 3 When Windows notifies you that it is safe to do so unplug the enclosure from your computer To disconnect the enclosure while Mac OS X is running 1 Dragthe USB icon into the TRASH 2 Unplug the enclosure Partitioning and formatting a new hard drive Creating a new partition on your PC Caution Doing the following will erase any existing data on the drive If the drive is damaged and you wish to recover the data continuing may overwrite the existing information Note For new hard drives you need to initialize and partition your hard drive before it will appear in Windows Explorer The best way to partition a new hard drive is to use the manufacturer s program Most hard drives should come with a CD that includes the installation program If not visit the manufacturer s website to see if a download is available If the manufacturers program is not available try the following instead To create a new partition on your PC 1 Right click on My Computer or Computer depending on which version of Windows you have then click Manage 2 Select Disk Management under Storage on the left pane Your PC should give you the option to initialize the disk If not locate the new drive right click on it where it reads New Simple Volume then click Initialize This step may not be required for some hard drives 3 Follow the prompts in the wizard 4 When the proc
12. ided into the port on the enclosure 2 Plug the other end of the cable into USB port on your computer USB 3 0 A type male connector a USB 3 0 Micro B type male connector The operating system automatically detects and sets up the new drive Ifthe drive is correctly detected a new drive letter is assigned to the enclosure For PCs the new drive letter appears in My Computer For Macintosh computers the new drive letter appears on the desktop Note for PC users If you do not see an additional drive in your system you might need to format the new drive See the following section for more information on detecting and formatting your drive Notes for Macintosh users If you do not see an additional drive in your system select Disk Utilities from the Utilities folder then select the external enclosure and format the drive to meet your requirements Disconnecting the enclosure from your computer You can disconnect the enclosure at any time while the computer is turned off If however you want to disconnect it while the computer is on make sure that you do it correctly To disconnect the enclosure while your PC is running Note if a drive window is open or the hard drive enclosure is active close any associated windows before trying to remove the enclosure 1 Right click the Safely Remove Hardware icon located near the clock on the taskbar 2 Click the drive you want to unplug then cl
13. ity stored on your clothing or body before touching any electronic components Handle the printed circuit board PCB by the edges only Avoid touching the electronic components 4 DX HD302513 Installing your hard drive in the enclosure To install your hard drive in the enclosure 1 Remove the two screws from the panel with the USB connector 2 Remove the plastic end cap and circuit board 3 Connect your hard drive s SATA connector to the corresponding connector on the enclosure circuit board 2 5 SATA hard drive 4 Gently slide the drive tray with drive attached into the enclosure w Replace the two screws on the side panel Setting up your hard drive enclosure Connecting the enclosure to your computer Notes Make sure you have installed the hard drive into the enclosure before connecting the enclosure to your computer Anew hard drive must be initialized and partitioned before it will appear in Windows Explorer or on your Mac desktop Refer to your hard drive manufacturers documentation or see Formatting the hard drive on your PC on page 5 For optimal performance make sure your laptop or PC has USB 3 0 ports SS If your computer does not have USB 3 0 capability you can plug the USB 3 0 cable into any available USB 2 0 port but it will only run at USB 2 0 speeds To connect the enclosure to your computer 1 Plug the smaller USB 3 0 Micro B type connector on the USB cable prov
14. oes not cover refurbished product If you notify Dynex during the Warranty Period of a defect covered by this warranty that requires service terms of this warranty apply How long does the coverage last The Warranty Period lasts for one year 365 days from the date you purchased the Product The purchase date is printed on the receipt you received with the Product What does this warranty cover During the Warranty Period if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Dynex repair center or store personnel Dynex will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Dynex and are not returned to you If service of products and parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Dynex Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a retail store location take your original receipt and the Product to the store you purchased it from Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging
15. our hard drive enclosure if you are using USB 3 0 ports Data throughput is greatly affected by the type and location of data on the disk A few very large files will copy much faster than many small files since the larger files are more likely to be arranged sequentially on the disk Magnetic Hard Disk Drives operate at speeds slower than the USB 3 0 s maximum data transfer rate If using an HDD your transfer speeds will be faster on USB 3 0 than on USB 2 0 but will still be limited by the phyiscal disk s throughput The data on my hard drive is corrupt Can boot from the enclosure Why can t partition or format my drive My hard drive is 2TB are there any unique issues Is RAID or JBOD supported Why do keep seeing 8 GB of hard drive space no partition Can use the hard drive enclosure with a Mac and a PC atthe same time The enclosure will not assemble correctly Troubleshooting Asso Connecting your hard drive to the enclosure is just like connecting a hard drive to the inside of your computer The enclosure itself will not corrupt your data If data has become corrupt it is likely caused by removing the enclosure while data was still being written to the hard drive from subjecting the drive to some kind of physical trauma even very subtle trauma or due to a design or quality issue with the original drive manufacturer Caution Never remove the enclosure while data is being written to
16. t up your computer from the Mac OS CD 2 Locate the Utilities folder on the Mac OS CD and double click it to open the folder 3 Double click Drive Setup to open the program 4 From the list of drives select the drive you want to initialize then click Initialize To format your hard drive with Mac 0S Extended format This method of formatting hard drives provides for a more efficient use of hard drive storage space 1 Click Custom Setup 2 Select the Type menu in the Volume info area then click Mac 0S Extended Format 3 Resize the volumes if desired 4 When ready click OK then click Initialize If initialization fails do the following 1 Click Initialization Options from the Functions menu 2 Select Low level format then click OK Choosing this option adds significant time to the initialization process Formatting the hard drive on a Mac Caution Formatting is only required for a new hard drive Do not format a drive that contains valuable data that you want to save To format the hard drive 1 Click Disk Utility under Applications 2 Select the new hard drive you are trying to install 3 Click the Erase tab 4 Choose a volume format and assign a name to the new drive then click Erase 6 DX HD302513 Troubleshooting Ido not see the enclosure additional drive in my system There isa USB icon in the system tray but can t find the hard disk in MY COMPUTER The data transfer between computer and device is slo
17. the hard drive Doing so may cause the hard drive to become corrupt Make sure all applications being run off the disk and all files in use are no longer in use before removing the unit For PCs use the Safely Remove Hardware icon to eject the drive before disconnecting For Mac drag the hard drive to the trash before disconnecting Never operate the disk and enclosure in a partially assembled state This enclosure does not support using the enclosed disk drive as a boot device e Verify that you are logged into the computer with an account that has Administrator Rights If that does not resolve the issue contact your hard drive manufacturer or PC manufacturer for assistance Make sure you have the latest Service Pack installed on Windows XP With the latest Service Pack Windows XP Windows Vista and Windows 7 should recognize up to a 2TB drive No This is most likely because this space was either not partitioned or initialized when the hard drive was formatted Another reason is that when the hard drive has been removed improperly a ghost drive can be created on the computer which confuses the computer into thinking there is still usable space It is best to turn off the enclosure and reboot your system No the hard drive must be initialized and partitioned for one or the other When formatted for Mac a PC will not be able to see the partition and vice versa Check the physical size of the hard drive Does it
18. w Make sure the drive is functioning A drive that does not work in a laptop will more than likely not work with this enclosure either When you connect the enclosure to the PC you should hear the drive spin up it may be very faint Contact your hard drive manufacturer or PC manufacturer for information on testing your hard drive The enclosure may not be receiving enough power to spin up the hard drive USB ports are supposed to have a power rating of 5 25V 500mA If the system provides less than 500mA per USB port the enclosure may not have enough power to spin up the hard drive completely although the enclosure will light up and you will hear the drive attempting to spin up Make sure that the USB cable is connected firmly to your enclosure and computer Make sure that the USB cable is not broken or damaged in some way Open the enclosure and make sure that all of the connections are securely fastened If you have a desktop computer try using the USB ports on the back of the computer instead of the front USB ports The cables connecting front USB ports are not always properly shielded and may not properly handle USB 3 0 speeds Your PC may not be able to recognize the partition on the hard drive because it is damaged or not a valid format You can initialize partition and format unrecognized drives by using the software that comes with the hard drive or by using the Disk Manager PC users or Disk Utilities Mac Users
Download Pdf Manuals
Related Search