Dynex DX-UPDVD2 User's Manual
Contents
1. setting of Digital Audio Output is Bitstream and your TV supports Bitstream data the output will be in Bitstream format If not the output will be in PCM format Dynamic Range This function is generally used when playing programs at night in order to avoid disturbing others This setting lets you dynamically lower the volume and still keep the original tone quality This is the range measured in decibels dB between the loudest and the quietest sound registers in a soundtrack 4 Press lt Left to return to the previous menu 5 Press SETUP to exit the on screen menus To use the Video Setup Page 1 Press SETUP The General Setup Page opens General Audio Video Preference General Setup Page Angle Mark On OSD Language ENG Screen Saver On Playback Memory On Go to General Setup Page 2 Press the Left or p gt Right buttons to select Video The Video Setup Page opens General Audio Video Preference Video Setup Page Resolution 480p TV Display wide Go to Video Setup Page 20 DX UPDVD2 TMM 3 Pressthe A Up v Down Left or p Right buttons to move the cursor and highlight a selection then press OK to confirm your selection Options include Resolution Lets you select the resolution output of the player to match your TV TV Display Sets the aspect ratio of the video output Notes No matter which display format is selected a pict2. ANGLE Function Press to return to the previous chapter DVD or track CD Press to open and close the setup menu Press to open the top DVD menu available on some discs Press to zoom in on the DVD image Press to enter the Program menu and set up a playlist of tracks chapters Press the direction buttons to move around the menu Input numbers by pressing the numeric buttons In DVD mode input Title and Chapter numbers In CD mode input track numbers Press CANCEL to delete the number you just input Select CLEAR and press OK to delete the entire playlist Select PLAY and press OK to start program playback Press to open the on screen display which provides current status information and where you can change settings and options Press to step through alternate angles to watch DVD playback if available Installing remote control batteries To install the remote control batteries 1 Remove the battery cover 1080p Upconvert DVD Player 11 2 Insert two AAA batteries into the battery compartment Make sure that you match the and symbols on the batteries with the and symbols in the battery compartment 3 Replace the cover Notes Do not mix batteries of different types Do not mix old and new batteries Remove batteries when the charge is depleted Battery chemicals can cause a rash If the batteries leak clean the battery compartment with a cloth If chemi
3. dirty or if there is dirt or condensation on your player s lens If you record a disc using a personal computer even if it is recorded in a compatible format there are cases in which it may not play because of the settings of the application software used to create the disc Check with the software publisher for more detailed information Your player requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality Pre recorded DVDs are automatically set to these standards There are many different types of recordable disc formats including CD R containing MP3 or WMA files and these require certain pre existing conditions see above to ensure compatible playback You should note that permission is required in order to download MP3 or WMA files and music from the Internet Our company has no right to grant such permission Permission should always be sought from the copyright owner Your player has a regional code 1 printed on the back of the case Your player can play only DVDs labeled with the same regional code 1 or ALL Notes Most DVDs have a globe with one or more numbers in it clearly visible on the cover This number must match your player s regional code or the DVD cannot play If you try to play a DVD with a different regional code from your player the message Check Regional Code appears on the TV screen 1080p Upconvert DVD Player 5 This product incorporate
4. function correctly Turn on your player and use it occasionally Do not place foreign objects in the disc tray Ifyou place your player near a TV radio or VCR the playback picture may become poor and the sound may be distorted In that case place the player away from the TV radio or VCR Ifthe pickup on your player has moisture condensation the player may not operate correctly If this is the case remove the disc and leave it on for two or three hours That will allow the player to warm up and evaporate any moisture If you leave the player plugged in moisture condensation will seldom occur 6 DX UPDVD2 CMM E Features Front panel DYNEX Item Description Disc tray Display window Remote control sensor gt OPEN CLOSE button p Play Pause C standby power Power indicator Function Place a disc on the tray when it opens Shows the current status of your player Point the remote control at this sensor to control playback Press to open or close the disc tray Press to begin playback Press again to pause playback Press again to resume playback Press to turn your player on or off Turns red on standby and green when the player is turned on 1080p Upconvert DVD Player l Back panel Description AC power cable HDMI OUTPUT Composite video output Component output YCbCr Aud
5. level output 0 7 V p p Resistance 75 ohm General Power 110 120 V 50 60 Hz Power consumption 12W Dimensions LxWxH 14 17 x 8 46 x 1 61 inches 360 x 215 x 41 mm Weight 3 53 Ibs 1 6 kg Operating temperature 41 F to 95 F 5 C to 35 C Operating humidity 5 to 90 Legal notices FCC Part 15 This device complies with Part 15 of the FCC Rules Operation of this product is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply within the limits for a class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the
6. manufacture of the material or workmanship of the Product is determined to be defective by an authorized Dynex repair center or store personnel Dynex will at its sole option 1 repair the Product with new or rebuilt parts or 2 replace the Product at no charge with new or rebuilt comparable products or parts Products and parts replaced under this warranty become the property of Dynex and are not returned to you If service of Products and parts are required after the Warranty Period expires you must pay all labor and parts charges This warranty lasts as long as you own your Dynex Product during the Warranty Period Warranty coverage terminates if you sell or otherwise transfer the Product How to obtain warranty service If you purchased the Product at a retail store location take your original receipt and the Product to the store you purchased it from Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging If you purchased the Product from an online web site mail your original receipt and the Product to the address listed on the web site Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging To obtain in home warranty service for a television with a screen 25 inches or larger call 1 888 BESTBUY Call agents will diagnose and correct the issue over the phone or will
7. the TV is in good working condition Press the RESOLUTION button repeatedly until the picture returns to normal No sound Make sure that the connection between the player and other devices is secure Make sure that the TV and amplifier are in good working condition and setup correctly DVD will not play Make sure that the disc is correctly inserted Clean the disc The remote control does not Remove obstacles between the remote control and the player work Aim the remote control at the sensor on the front panel of the player Check the batteries and replace them if necessary Picture is distorted e Check the disc for dirt and scratches Clean or replace the disc Unplug the player wait ten seconds then plug it back in and turn it on The control buttons onthe Power surges or other electrical phenomena may have disabled the buttons player do not work Unplug the player wait ten seconds then plug it back in and turn it on Maintaining Care and handling of discs Handling discs Do not touch the playback side of the disc Hold the disc by the edges so that fingerprints do not get on the surface Never stick paper or tape on the disc Storing discs After playing store the disc in its case Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight 1080p Upconvert DVD Player 23 Cleaning discs Fingerprints and dust on the disc can cause p
8. D Y NE eee 1080p Upconvert DVD Player USER GUIDE 1080p Upconvert DVD Player Important safety INSKRUCHONS caisssissssvvinsvacoscttassscencesasesorsasianniennanstovanviennare 2 POALINGS i nana A iv 6 Setting up your DVD player ce ssssssssccsssecssescssessssescssecssssecssnecesseesnees 11 Using your DVD iii r 14 Troubleshooting z nik ran kia 22 Maintaining z chod sbak dni o satana 22 Specifications nan o n 23 E085 i rio 24 90 day limited warranty cs ssscssssssssccssessssscessnssssesessnsccssnsessscessnsesss 25 Important safety instructions Read these instructions Keep these instructions Heed all warnings Follow all instructions Do not use this apparatus near water Clean only with a dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 8 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat MO U PWN 1080p Upconvert DVD Player 3 9 10 11 12 13 14 15 16 17 18 Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of
9. DUCT INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES WHETHER EXPRESS OR IMPLIED WILL APPLY AFTER THE WARRANTY PERIOD SOME STATES PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR PROVINCE TO PROVINCE Contact Dynex For customer service please call 1 800 305 2204 www dynexproducts com Distributed by Best Buy Purchasing LLC 7601 Penn Avenue South Richfield Minnesota U S A 55423 3645 2009 Best Buy Enterprise Services Inc All rights reserved DYNEX is a trademark of Best Buy Enterprise Services Inc Registered in some countries All other products and brand names are trademarks of their respective owners 1080p Upconvert DVD Player 27 gt DYNE www dynexproducts com 800 305 2204 2009 Best Buy Enterprise Services Inc All rights reserved DYNEX is a trademark of Best Buy Enterprise Services Inc Registered in some countries All other products and brand names are trademarks of their respective owners ENGLISH Distributed by Best Buy Purchasing LLC 7601 Penn Ave South Richfield MN 55423 U S A 09 0463
10. a certain time Playback Memory You can choose to view a disc from the point where it was stopped Unlike the resume function the playback memory function is effective even if the DVD is removed from the player 3 Press Left to return to the previous menu 4 Press SETUP to exit the on screen menus 18 DX UPDVD2 TTT To use the Audio Setup Page 1 Press SETUP The General Setup Page opens General Audio Video Preference General Setup Page Angle Mark On OSD Language ENG Screen Saver On Playback Memory On Go to General Setup Page 2 Press the lt q Left or p gt Right buttons to select Audio The Audio Setup Page opens General Audio Video Preference Audio Setup Page Digital Audio Output Bit HDMI Audio Auto Dynamic Range Go to Audio S etup P age 3 Pressthe A Up v Down lt Left or Right buttons to move the cursor and highlight a selection then press OK to confirm your selection Options include Digital Audio Output Sets the audio outputs This DVD player produces two kinds of audio output Bitstream or PCM This surround sound format is output to a Dolby Digital DTS decoder through the coaxial and optical jacks on the back of the plaver HDMI Audio You can set the HDMI audio source When in PCM mode all the audio signals through HDMI are output in PCM format When in AUTO mode if the 1080p Upconvert DVD Player 19
11. cals touch your skin wash immediately Ifthe remote control is not going to be used for an extended period of time remove the batteries Setting up your DVD player Unpacking and setting up Package contents DVD player 1 Remote control 1 Batteries What size batteries 2 Audio Video cable 1 User Guide 1 Quick Start Guide 1 Digital Television Transition 1 If you need to replace any of these items call our help line mentioned in the Warranty section of this guide 12 DX UPDVD2 OOO IOO Carefully remove all of the components from the carton and make sure that you have all of the necessary components before you dispose of the carton e Remove all packing materials from the individual components Do not remove any labels or stickers on the back panel of your player Place your player in the location you want Your player is designed to be used on a level stable flat surface such as a table desk shelf or stand convenient to a power outlet out of direct sunlight and away from sources of excess heat dust moisture or vibration e Unwind the AC power cord and extend the cord to its full length then plug it into the back of your player Making connections Easy DVD hook up guide For the best possible picture follow these guidelines and use the best cables your TV accepts e Normal Composite video Better Component video Best HDMI video HD DVD playback Enjoy your entire DVD
12. collection in brilliant high definition format This DVD player upconverts DVDs to your HDTV s native resolution whether it s 480i 480p 720p 1080i and 1080P HDMI output Use this output for HD conversion and experience stunning HD images and crisp digital audio Composite connection A V cable connectors are color coded Connect yellow video to yellow red audio right to red and white audio left to white A V cable DVD player 1080p Upconvert DVD Player 13 Component connection Stereo system Audio cable connectors are color coded Connect red audio right to red and white audio left to white DVD player Component cable connectors are color coded Connect yellow Y to yellow blue Pb or Cb to Component blue and green Pr or Cr to green cable DVD player Amplifier o B Digital optical or digital coaxial cable DVD player Component cable connectors are color coded Connect yellow Y to yellow blue Pb or Cb to blue and green Pr or Cr to green Component cable 14 DX UPDVD2 0 Using your DVD player Power source Use the polarized AC line cord provided for operation on AC power Insert the AC cord plug into a standard 120 V 60 Hz polarized AC outlet If you cause a static discharge when touching your player and your player fails to function unplug your playe
13. e Caution Danger of explosion if the battery is incorrectly replaced Replace only with the same or equivalent type CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER Warning This product employs a laser system To ensure correct use of this product read this owner s manual carefully and retain it for future reference Should your player require maintenance contact qualified service personnel Making adjustments to controls or performing procedures other than those specified herein may result in hazardous radiation exposure To prevent direct exposure to the laser beam do not try to open the enclosure Visible laser radiation when open DO NOT STARE INTO THE BEAM 4 DX UPDVD2 n Introduction To ensure correct use of your player read this owner s manual carefully and retain for future reference About the symbol The symbol may appear on your TV display during operation and indicates that the function is not permitted by your player or specific media Notes Regional code Do not use irregularly shaped CDs for example heart shaped or octagonal Doing so may result in malfunctions Depending on the recording software and the finalization some recorded discs CD R RW or DVD R RW may not be playable DVD R RW DVD R RW and CD R RW discs recorded using a personal computer or a DVD or CD recorder may not play if the disc is damaged or
14. equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the users authority to operate this equipment Notices Specifications and features are subject to change without notice or obligation For service and support call 800 305 2204 1080p Upconvert DVD Player 25 90 day limited warranty Dynex Products Dynex warrants to you the original purchaser of this new DX UPDVD2 Product that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of 90 days from the date of your purchase of the Product Warranty Period This Product must be purchased from an authorized dealer of Dynex brand products and packaged with this warranty statement This warranty does not cover refurbished Product If you notify Dynex during the Warranty Period of a defect covered by this warranty that requires service terms of this warranty apply How long does the coverage last The Warranty Period lasts for 90 days from the date you purchased the Product The purchase date is printed on the receipt you received with the product What does this warranty cover During the Warranty Period if the original
15. ess three times to repeat All Press four times to cancel repeat A B REPEAT Press once to select a starting point to repeat then press again to set the end point The selected section will be repeated Press a third time to cancel 16 DX UPDVD2 NN SSCS PROGRAM Press to display the program information window Press the number buttons to input the program number what you want When finished move the cursor to select the Start logo The program starts playback and the screen displays Program To cancel press m stop then press OK ANGLE Press to view the action from different angles not available on all DVDs RESOLUTION Press to set the video output resolution Options include 480i 480p 720p 1080i 1080p and Auto Note Setting a resolution your TV cannot support could result in an unstable picture or a loss of picture Check your TV manual for more information DISPLAY Press to display information about the disc such as title elapsed title remain chapter elapsed chapter remain and display off JPEG disc playback When playing a JPEG disc a navigation menu is displayed automatically Inthe menu press A Up or W Down to select a file then press OK The file will be played in a slideshow Press I lt lt d previous or A next to select the previous or the next picture Press pi play pause to pause the current picture then press OK to return to normal playing Press ZOOM to zoom
16. have an Dynex approved repair person dispatched to your home Where is the warranty valid This warranty is valid only to the original purchaser of the Product in the United States Canada and Mexico What does the warranty not cover This warranty does not cover Customer instruction Installation Set up adjustments e Cosmetic damage Damage due to acts of God such as lightning strikes Accident Misuse Abuse Negligence Commercial use Modification of any part of the Product Plasma display panel damaged by static non moving images applied for lengthy periods burn in 26 DX UPDVD2 M O This warranty also does not cover Damage due to incorrect operation or maintenance Connection to an incorrect voltage supply Attempted repair by anyone other than a facility authorized by Dynex to service the Product Products sold as is or with all faults Consumables such as fuses or batteries Products where the factory applied serial number has been altered or removed REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY DYNEX SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT INCLUDING BUT NOT LIMITED TO LOST DATA LOSS OF USE OF YOUR PRODUCT LOST BUSINESS OR LOST PROFITS DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE PRODUCT ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRO
17. he beginning of the disc press m stop again then press p play pause Your player starts playback at the beginning of the disc During playback press pp fast forward to fast forward through the disc Each time the pp fast forward button is pressed the fast forward motion speed changes Press p gt 1 play pause to resume normal playback AWN 1080p Upconvert DVD Player 15 During playback press 4 fast reverse to fast reverse through the disc Each time the 4 lt fast reverse button is pressed the fast reverse motion speed changes Press p play pause to resume normal playback During playback press 16 4 previous to return to the start of the previous chapter Each time you press this key you can skip a chapter back to the start of the disc During playback press A next to skip the current chapter and play the next chapter During playback press 11 p step repeatedly to step forward frame by frame in the video Press p play pause to resume normal playback 5 Press OPEN CLOSE lt to open the tray then remove the disc 6 Press OPEN CLOSE lt to close the disc tray or press STANDBY cb The disc tray closes automatically and the player turns off Note The symbol may appear on your TV display during playback This symbol indicates that the function you selected is not permitted by your player or specific media Playback options Remote control functions The fo
18. in on a picture When the picture is zoomed press lt q lt fast reverse or p gt fast forward to select different enlargement ratio or press the A Up W Down lt Left or Right buttons to move the enlarged picture Press PROGRAM to select a slideshow transition You can set transition effects for each picture e To rotate an image press the A Up v Down lt Left or Right buttons to invert mirror rotate left or rotate right These operations are allowed only when a picture is being displayed normally and will be cancelled automatically when a new picture is displayed 1080p Upconvert DVD Player 17 l Using the menus To use the General Setup Page 1 Press SETUP The General Setup Page opens General Audio Video Preference General Setup Page Angle Mark On OSD Language ENG Screen Saver On Playback Memory On Go to General Setup Page 2 Pressthe A Up v Down lt Left or p Right buttons to move the cursor and highlight a selection then press OK to confirm your selection Options include Angle Mark You can turn this option On which lets you select a particular camera angle by pressing ANGLE when playing a DVD that offers multiple angles OSD on screen display Language You can select the language for the setup menus and on screen display Screen Saver You can choose to have an animated picture on the screen whenever the DVD player is idle for
19. io output left right Coax digital audio output Optical digital output Function Plug this cable into an AC power outlet Connect to the HDMI input jack on a TV if available Connect to the composite video input jack on a TV if available Connect to the component video input jacks on a TV if available Connect to the audio input jacks left and right of a TV amplifier or other equipment Connect to the digital audio coaxial jack on an external amplifier such as a Dolby Digital decoder Connect to the digital optical audio input jack on an external amplifier such as a Dolby Digital decoder Remote control Remote control Item Button STANDBY 1 0 9 number buttons U K AUDIO SUBTITLE ZOOMN TOP MENU REPEAT JAB ANGLE PROGRAM RESOLUTION DISPLAY Function Press to turn your player on or off Press to select numbered options in a menu or to select audio tracks or JPEG pictures pp fast forward Press to fast forward the DVD or CD Press Ip step repeatedly to step through the fast forward speeds Press repeatedly to step forward frame by frame in a video DX UPDVD2 1080p Upconvert DVD Player 9 ll Item Button Function 5 lt 4 lt q fast reverse Press to fast reverse the DVD or CD Press repeatedly to step through the fast reverse speeds 6 lt Left arrow Press to select menu options or adjust A U
20. llowing functions are applicable only to DVD discs If other disc formats are played screen display and operation will be different e CLEAR This button can be used to clear any incorrect information that may have been input SEARCH Press this button one time and the screen will display search menu Press it a second time to cancel the search function In the search menu you can press A Up or W Down to highlight the item what you want then press OK to confirm DVD MENU Press this button to display the root menu then select an item according to your preference This key is only valid on DVDs with multi layer menus e SETUP Press this button to display the on screen setup menu AUDIO Press this button to change the audio mode such as Audio 1 2 AC 3 2 CH English or Audio 2 2 AC 3 5 1 CH English Note When press this button repeatedly you must wait approximately three seconds SUBTITLE Press this button and the screen displays SUBTITLE 01 XX XXXXX 01 indicates the ordinal number of this language XX indicates total number of languages available and XXXXXX is the language The number of languages available depends on the DVD Z0OM Press this button to zoom in on the picture Each time you press the button the magnification level will change TOP MENU Press this button to display the title menu available on some DVDs REPEAT Press once to repeat a Chapter Press twice to repeat a Title Pr
21. oor picture guality and sound distortion Before playing clean the disc with a clean cloth Wipe the disc from the center out Do not use strong solvents such as alcohol benzine thinner commercially available cleaners or anti static spray intended for older vinyl records Note Never operate this player immediately after moving it from a cold location to a warm location Leave it for two or three hours without operating it If you use this product in such a situation it may damage discs or internal parts Resetting your player Reset your player if you observe any of the following symptoms When your player is plugged in but the power will not turn on or off When the display window is not working When your player does not operate normally To reset your player Unplug the power cord for 30 minutes then plug in the power cord again This should reset your player Specifications System and outputs VF Signal system NTSC Frequency response CD 20 Hz 20 KHz EIAJ DVD 20 Hz 44 KHz 96 KHz Sample result 20 Hz 22 KHz 48 KHz Sample result Audio S N ratio gt 90 dB Audio MPEG LAYER standard Audio output analog audio Electric level output 1 8 0 2 V Resistance 10 Kohm Audio output digital audio Electric level output 0 5 V p p Resistance 75 ohm 24 DX UPDVD2 OOO IOO Video output Electric level output 1 0 0 2 V p pResistance 75 ohm Unbalanced negative Component video Y Cb Cr Electric
22. parrow settings p gt Right arrow v Down arrow 7 OK Press to make or confirm menu selections 8 DVD MENU Press to open the DVD menu 9 AUDIO Press to select an audio language or audio channel 10 SUBTITLE Press to select a subtitle language if available 11 REPEAT Press during playback to step through repeat options including repeat current chapter repeat current title repeat entire disc and off 12 RESOLUTION Press to change the vertical resolution 13 A B Press once to set the start of a repeat loop Press again to set the end of the repeat loop and start repeat playback Press again to cancel repeat 14 OPEN CLOSE gt Press to open and close the disc tray 15 CLEAR Press to clear any information that was input incorrectly 16 SEARCH Press to enter the Search menu When the Search menu opens press the direction keys to select the title chapter track number or time setting to which you want to go then press OK to start playback 17 E stop Press to stop playback Playback begins from this point when you press PLAY Press STOP twice to begin playback from the beginning 18 PPI next Press to advance to the next chapter DVD or track CD 19 pi play pause Press to start playback Press again to pause playback Press once more to resume playback 10 DX UPDVD2 n Item 20 21 22 23 24 25 26 Button 1 lt 4 lt q previous SETUP TOP MENU Z00M PROGRAM DISPLAY
23. r from the AC outlet and plug it back in Your player should return to normal operation Warnings The player uses a polarized AC plug with one wide blade and one narrow blade The plug will only fit into matching polarized power outlets This is a safety feature to reduce the possibility of electric shock If the plug will not fit in your power outlets you probably have outdated non polarized outlets which should be changed by a qualified licensed electrician Do not file the wide blade on the plug or use an adapter to make the plug fit into your outlet Never connect the AC cord plug to other than the specified voltage 120 V 60 Hz Use the attached power cord only Turning your player on and off To turn your player on and off 1 Plug the power cord into an AC power outlet 2 Press the STANDBY button to turn on your player 3 Press the STANDBY button again to turn off your player Playing a disc To play a disc Turn on your player and your TV Press OPEN CLOSE lt to open the disc tray Load the disc into the tray with the label side up Press OPEN CLOSE lt to close the tray Playback starts automatically If playback does not start press play pause on the remote control or the player to start the playback Tostop the playback press m stop The player notes the stopped point depending on the disc Press poi play pause to resume playback from the stopped point To start playback from t
24. s copyright protection technology that is protected by U S patents and other intellectual property rights Use of this copyright protection technology must be authorized by Macrovision and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Reverse engineering or disassembly is prohibited Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories I DOLBY DIGITAL Disposal of your old appliance 1 When this crossed out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002 96 EC 2 Allelectrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities 3 The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health 4 For more detailed information about disposal of your old appliance please contact your city office waste disposal service or the shop where you purchased the product Other considerations Notes The top and rear panels of your player may become warm after a long period of use This is not a malfunction When your player is not in use make sure that you remove the disc and turn off the power Ifyou do not use your player for an extended period it may not
25. the DVD supports the language Subtitle Lets you set the preferred subtitle language as the default when playing a DVD If the DVD supports the language Disc Menu Lets you set the preferred menu language as the default when playing DVD If the DVD supports the language Parental the parental control function works in conjunction with the different censorship classes assigned to DVDs These classes help to control the types of DVDs that the family watches There are up to eight censorship classes for DVDs Note If you change this set you must input a password Initial password 000000 Password Change Lets you change the Parental Control password Type six numerals as the new password Be sure remember the new password When setting the parental control function you must input the new password Note Initial password 000000 Default Resets to all the manufacturer s original settings for this DVD player Press OK to perform the reset 4 Press Left to return to the previous menu 5 Press SETUP to exit the on screen menus 22 DX UPDVD2 2 Troubleshooting Check the following guide for the possible causes and solutions for a problem before contacting the nearest service center or dealer for repairs Symptom Solution No power Make sure that the DVD player is plugged in and that the AC power connection is secure No picture Make sure that the connection between the DVD player and the TV is secure Make sure that
26. the obsolete outlet Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer Use only with the cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped To reduce the risk of fire or electric shock do not expose this device to rain moisture dripping or splashing and no objects filled with liquids such as vases shall be placed on it An apparatus with a three prong grounding type plug is a Class apparatus which needs to be grounded to prevent possible electric shock Make sure that you connect this Class device to a grounding type three prong outlet The wall plug is the disconnecting device The plug must remain readily operable Batteries should not be exposed to excessive heat such as sunshine fire or the lik
27. ure recorded in standard 4 3 format always displays in the 4 3 aspect ratio The display format of DVD titles may vary Refer to the information that accompanies your specific DVD title If the DVD title is recorded in 16 9 wide display format while the TV is a standard 4 3 screen horizontal compression of the image will result Some DVD titles may be recorded in special formats In such cases the DVD titles will always appear on the screen in their original format regardless of which TV display format you select 4 Press Left to return to the previous menu 5 Press SETUP to exit the on screen menus To use the Preferences Setup Page 1 Press SETUP The General Setup Page opens General Audio Video Preference General Setup Page Angle Mark On OSD Language ENG Screen Saver On Playback Memory On Go to General Setup Page 1080p Upconvert DVD Player 21 2 Pressthe lt Left or p Right buttons to select Preference The Preferences Setup Page opens General Audio Video Preference Preference Page Audio ENG Subtitle Off Disc Menu ENG Parental Password Default Go to Preference Page 3 Pressthe A Up v Down lt Left or Right buttons to move the cursor and highlight a selection then press OK to confirm your selection Options include Audio Lets you set the preferred audio language as the default when playing a DVD If
Download Pdf Manuals
Related Search