Dynex 57" Combination Monopod-Tripod - Black Quick Setup Guide
Contents
1. folding One leg monopod conversion CC Quick release Mount your device to this removable plate mounting plate 2 Holds the quick release mounting plate plate Quick release mounting plate locking knob Locks the quick release mounting base plate to the tripod N 12 Twist screw leg 3 1 3 Variable angle Allows the camera to be adjusted to any angle ball head 4 Pan locking knob Locks the horizontal movement of the ball head Ball head locking Lets you adjust the angle of the ball head knob Center column Lock the first and second sections of the column locks Angle adjusting Lets you adjust the leg angle position tab Center column Adjustable column provides a quick height adjustment Grip sponge Grip the tripod comfortably Hanging hook Hang a heavy item on this hook to add stability to the tripod Locks the legs in place lock Rubber feet Provide a secure non slip footing for your tripod Setting up your tripod 1 Swing each leg down 2 With one hand grab all the leg locks on one leg and twist them counterclockwise to loosen them 3 Extend the leg sections to the height you want 4 Twist each leg lock clockwise to tighten it Repeat for each leg Caution Incorrectly securing a leg lock can cause the tripod leg to retract unexpectedly and could result in damage to the tripod or to the attached camera or camcorder 5 Toset the angle position pull out the angle adjusting tab and lift2. Converting to a monopod 1 Holding the tripod firmly unscrew the monopod leg from the main tripod assembly Monopod leg 2 Unscrew the center column locking screws unscrew the bottom hanging hook then remove the center column from the tripod base Center column Hanging hook 3 Screw the center column with ball head into the monopod leg 4 To adjust the height unscrew the leg twist locks extend the leg to the height you want then tighten the leg locks Storing your tripod 1 Remove your camera 2 Loosen the center column locks Raise the column as far as it will go then tighten the bottom lock Lower the top section as far as it will go 3 Twist each leg lock counterclockwise and collapse the legs Wrap your hand around all four leg locks then twist clockwise to tighten them all at once 5 Pull out the leg release tabs and flip the legs up Note You may need to rotate the head slightly so the legs fit between the knobs 6 Store the tripod into the carrying case A Important safety instructions Make sure that all leg locks are correctly tightened and that the legs are fully opened before use Do not carry or transport your tripod with camera equipment attached for example over your shoulder or cradled in your arms Do not expose your tripod to excessive heat or cold or use near any flame or fire Donotoil or grease any part of the tripod Do not use any solvents or thinners to cl
3. ean your tripod Use only a mild detergent and wipe dry with a soft lint free cloth Do not exceed the load limit of this tripod Specifications Maximum operating height 57 1 in 145 cm Minimum operating height 6 7 in 17 cm Folded height reversed legs 13 4 in 34 cm Net weight 2 7 lbs 1 24 kg Max operating load 8 8 Ib 4 kg Number of leg sections 5 Quick release thread 1 4 in 0 6 cm Panoramic angle horizontal 360 and vertical 90 Material aluminum alloy One year limited warranty Visit www dynexproducts com for details Contact Dynex For customer service call 800 305 2204 U S and Canada or 01 800 926 3020 Mexico www dynexproducts com DYNEX is a registered trademark of BBY Solutions Inc Registered in some countries Distributed by Best Buy Purchasing LLC 7601 Penn Ave South Richfield MN 55423 U S A 2014 BBY Solutions Inc All Rights Reserved V1 ENGLISH 14 0371 DYN E eee DX TRPMN57 57 Compact Tripod Monopod Combo Before using your new product please read these instructions to prevent any damage QUICK SETUP GUIDE Package contents Tripod Carrying case Quick Setup Guide Features Compact portable size with built in bubble level can support a camera up to 8 8 Ibs 4 kg One leg conversion to use as a monopod Super low 6 7 in 17 cm shooting angle Reversed folding reduces storage space requirement to 13 4 in 34 cm Reversed
4. the tripod leg then press the angle adjusting tab in place 6 Adjust the center column by unscrewing the center column locks and raising the center column to the height you want then tighten the center column locks 7 To remove the quick release mounting plate unscrew the quick release mounting plate locking knob then lift the plate away from the head 8 Align the bottom of your camera or camcorder with the 1 4 mounting screw then secure your camera or camcorder to the plate with the screw The screw should be tight 9 Slide the plate onto the tripod head Turn the quick release mounting plate locking knob until it stops to secure the plate Using your tripod 1 To adjust the horizontal movement of the ball head turn the pan locking knob counter clockwise move the ball head into the position you want then lock the ball head in place by turning the knob clockwise until tight To adjust the head ball turn the ball head locking knob counter clockwise adjust the ball head then lock the ball head in place by turning the knob clockwise until tight For low angle shooting unscrew the hanging hook then remove the center column Reverse the direction of the center column then insert the column into the base Screw the hanging hook into place Hanging hook
Download Pdf Manuals
Related Search