Home

Denon DHT-M330DV User's Manual

1. 2 Press the MEMO button Remote control unit REPEAT Remote control unit 3 Auto tuner presets remote control unit only Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels 1 to 40 NOTE e f an FM station cannot be preset automatically due to poor reception use the Manual tuning operation to tune in the station then preset it using the manual Preset memory operation Press the MEMORY button for more 1 than 2 second REPEAT Up to 40 of the best received stations in your area will be stored automatically switches Then you can select each stations Switch1 to DVD easily Remote control unit Switch2 to TUNER Tuner TV VCR Set the remote control selector So r Io 1 Awe 43 ENGLISH 4 Listening to preset stations remote control unit only Example Listening to the station preset at number PO3 This operation is only possible from the remote control unit 1 Use the and preset buttons to select preset number 3 or press the 3 button on the numeric keypad to display preset number P03 Set the remote control selector switches u Switch1 to DVD 1 SONS I Im TV AUX1 Switch2 to TUNER Ste ei Cl O O 0 0 SCH CIE CN i Remote control unit x The preset buttons on the remote control unit TUNER CH and can be used at any time 5 RDS Radio Data System RDS works only on
2. a 1 Set the surround mode to AUTO DECODE e AUTO DECODE is displayed then the normal display reappears SURROUND MODE PURRORAODE AUTO DECODE Or Main unit Remote control unit x If the mode is set to anything other than AUTO DECODE the AUTO DECODE mode can be set using the AUTO DECODE button on the remote control unit 2 Press the SURROUND PARAMETER button on the remote control unit and select the 2 channel decode mode SURROUND SURROUND PARAMETER PARAMETER Main unit Remote control unit x his can be selected when the digital input consists of no signal PCM signals Dolby Digital 2 channel signals as well as when the analog input is selected 3 Select the desired 2 channel decode mode using the lt and gt SELECT buttons e The mode switches as follows each time one of the buttons is pressed lt gt a m Remote control unit 4 SELECT gt ben TN Y zs TUNING Main unit x DTS NEO 6C and DTS NEO 6M can be selected for analog and PCM sources x The Auto Stereo mode can be selected when the function is set to DVD TV AUX1 or AUX2 x Once the surround parameters have been set stop operating buttons After several seconds the display returns to normal and the settings are automatically validated NOTES e The 2 channel decode mode cannot be set when Dolby Digital 5 1 channel signals or DTS signals are being input 35 ENGLISH
3. Changing the Quick Setup settings At SPEAKER SETUP under Quick Setup procedure page 27 select the configuration to be used 6 1CH or 7 1CH n Checking and adjusting the playback level using test tones Before playing use test tones to check and adjust the playback level of the different speakers Page 33 e Depending on the 6 1 7 1 channel setting the surround back channel is also displayed and can be set Setting the delay time distance setting Set the distance from the different speakers at 6 Setting the speaker distance Page 39 under 10 SURROUND PLAYBACK page 33 e Depending on the 6 1 7 1 channel setting the surround back channel is also displayed and can be set 4 Surround playback in the auto decode mode When set for 6 1 or 7 1 channel playback the signals can be decoded and played in the Dolby Digital EX DTS ES and Dolby Pro Logic IIx modes e At 1 Dolby Digital and DTS surround playback on page 34 Dolby Digital and multi channel sources are played in 6 1 or 7 1 channels in the Dolby Digital EX or Dolby ProLogic IIx mode DTS sources are played in 6 1 or 7 1 channels in the DTS ES or Neo 6 mode e For 2 channel sources Instead of Dg PLII at 2 channel mode setting on page 35 Dg PLIIx surround parameter e When Dolby Digital EX or DTS ES sources are played Dg EX or DTS ES is displayed and the source is played in 6 1 or 7 1 channels e For Dolby Pro Logic IIx decod
4. Ne pas obstruer les trous d a ration Non coprite i fori di ventilazione No obstruya los orificios de ventilaci n De ventilatieopeningen mogen niet worden beblokkeerd e Tapp inte till ventilations ppningarna Never disassemble or modify the set in any way e Versuchen Sie niemals das Ger t auseinander zu nehmen oder auf jegliche Art zu ver ndern Ne jamais d monter ou modifier l appareil d une mani re ou d une autre Non smontate mai n modificate l unit in nessun modo e Nunca desarme o modifique el equipo de ninguna manera Nooit dit apparaat demonteren of op andere wijze modifi ren a inte is r apparaten och f rs k inte bygga om den CAUTION e he ventilation should not be impeded by covering the ventilation openings with items such as newspapers table cloths curtains etc No naked flame sources such as lighted candles should be placed on the apparatus Please be care the environmental aspects of battery disposal The apparatus shall not be exposed to dripping or splashing for use No objects filled with liquids such as vases shall be placed on the apparatus ENGLISH E INTRODUCTION Thank you for choosing the DENON DHT M330DV HOME THEATER SYSTEM This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD as well as providing outstanding high fidelity reproduction of your favourite mus
5. Surround parameters 1 2 channel mode AUTO ST auto stereo mode 2 channel sources are played in 2 channel stereo When this mode is selected in the auto decode mode multi channel sources DVD BS digital etc are played in the multi channel mode while 2 channel sources CDs etc are automatically played in stereo PLII CINEMA PLII MUSI PLI GAME Even 2 channel sources undergo Dolby Pro Logic II processing and are played in the multi channel mode Dolby Digital Pro Logic II processing is applied to 2 channel sources as well to play them in the multi channel mode e PLII CINEMA Dolby Pro Logic II CINEMA mode The Cinema mode is for use with stereo television shows and all programs encoded in Dolby Surround e PLII MUSIC Dolby Pro Logic II MUSIC mode The Music mode is recommended as the standard mode for auto sound music systems no video and is optional for A V systems e PLI GAME Dolby Pro Logic II GAME mode The Game mode for playing games The game mode can only be used with 2 channel audio sources DTS NEO 6 CINEMA NEO 6 MUSIC mode e NEO 6 CINEMA mode This mode is optimum for playing movies Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2 channel sources as with 5 1 or 6 1 channel sources This mode is effective for playing sources recorded in conventional surround formats as well because the in phase component is assigned mainly to the center channel C and the reversed
6. to select one of the 29 program types Use this to display the time of the clock on the AVR M330 Press this button when the time service of an RDS station is being properly received TIME is displayed for 4 seconds NO TIME DATA is displayed if the RDS station does not offer a time service and when the broadcast is not being received properly Press this button when receiving RDS stations to select the frequency PS or Station name PTY or RT display Note that this button will not function if the reception is poor The display mode changes as follows each time the button is pressed REMOTE CONTROL UNIT e The included remote control unit RC 996 can be used to operate not only this unit but other remote control compatible DENON components as well In addition the memory contains the control signals for other remote control units so it can be used to operate non DENON remote control compatible products 1 Inserting the batteries D Remove the remote control unit s rear cover Notes on Batteries e Use R6P AA batteries in the remote control unit e The batteries should be replaced with new ones approximately once a year though this depends on the frequency of usage t e Even if less than a year has passed replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the set The included battery is only for verifying operation Replace it w
7. Connecting the antenna terminals AM LOOP ANTENNA Supplied FM INDOOR ANTENNA DIRECTION OF Supplied BROADCASTING STATION FM ANTENNA 75 Q ohms COAXIAL CABLE FM ANTENNA ADAPTER ANTENNA Option AM OUTDOOR ANTENNA GROUND e An PAL type FM antenna cable plug can be connected directly e f the FM antenna cable s plug is not of the PAL type connect using the PAL type antenna adapter Option AM loop antenna assembly Connection of AM antennas 1 Push the lever 2 Insert the conductor 3 Return the lever En e ty e Pn Connect to the AM antenna terminals Remove the vinyl tie and take out the Bend in the reverse connection line direction NOTES e Do not connect two FM antennas simultaneously e Even if an external AM antenna is used do not disconnect the AM loop a With the antenna antenna on top any stable e Make sure AM loop antenna lead terminals do not touch metal parts of the AI panel b With the antenna attached to a wall Installation hole Mount on wall etc 12 5 Using the active subwoofer e Use Subwoofer jack to connect in case you had additional active subwoofer e You can connect a larger active subwoofer to the system Connect the active subwoofer to the SW Subwoofer PRE OUT jack using a shielded audio cable AV SURROUND RECEIVER AVR M330 A 1 SYSTEM CONNECTOR DVD LO
8. lights when digital signals are input properly If DIG is flashing check whether the connections are proper and whether the input component s power is on Input mode when playing CD sources e When playing CDs containing recordings of live concerts etc in the AUTO mode the sound may be slightly broken at the beginning If this happens switch to the PCM mode Input mode when playing DTS sources e f DTS compatible CDs are played in the PCM mode noise is output because DTS playback is not possible To play a DTS compatible source be sure to set the input mode to AUTO or DTS e Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode If so play in the DTS mode 31 ENGLISH 3 After starting playback 1 Adjusting the sound quality SDB P EO The SDB P EQ function will not work in the direct mode 1 Press the SDB P EO button e he tone switches as follows each time the SDB P EQ button is pressed ENDS SDB P EQ Main unit Remote control unit 32 DEFEAT e The signals do not pass through the SDB DRC and PEQ1 3 adjustment circuits providing higher quality sound SDB ON e SDB Super Dynamic Bass is turned on DRC ON e DRC Dynamic Range Compression is turned on e This parameter adjusts the dynamic range of the Dolby Digital or DTS sound When listening with the volume turned relatively l
9. offering improvements over conventional Dolby Pro Logic circuits e Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround 7X but also regular stereo sources into five channels front left front right center surround left and surround right to achieve surround sound e Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited Dolby Pro Logic II offers a wider band range 20 Hz to 20 kHz or greater In addition the surround channels were monaural the surround left and right channels were the same with previous Dolby Pro Logic but Dolby Pro Logic II they are played as stereo signals e Various parameters can be set according to the type of source and the contents so it is possible to achieve optimum decoding 49 ENGLISH X Sources recorded in Dolby Surround These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology Dolby Surround is used for the sound tracks of movies recorded on DVDs LDs and Video cassettes to be played on stereo VCRs as well as for the stereo broadcast signals of FM radio TV satellite broadcasts and cable TV Decoding these signals with Dolby Pro Logic II makes it possible to achieve multi channel surround playback The signals can also be played on ordinary stereo equipment in which case they provide normal stereo sound There are two types of DVD Do
10. playing DTS sources Set the remote control selector switches Switch1 to DVD Switch2 to AMP TV VCR il t m 1 TAPE e The PCM indicator lights when PCM Lit playing PCM sources X When 2 channel sources the DOPL ILindicator lights X This switches automatically according to the format of the playback source 3 Display the surround parameters for that source SURROUND PARAMETER SURROUND PARAMETER Main unit Remote control unit 36 4 Select and set the surround 4 SELECT gt Surround parameters 2 parameters On the remote control unit use the Q DOLBY VS Dolby Virtual Speaker mode lt gt cursor buttons to set the V e REF Reference mode parameters V ij uu This is the standard mode US alent e WIDE Wide mode If nothing is done for 4 seconds This mode expands the front channel sound field from when the parameter is 4 S displayed the normal display a dh reappears AUN i NOTES Setting the DOLBY VS mode Remote control unit e Press the VIRTUAL button on the remote control unit during playback in the Dolby Virtual Speaker mode to switch between Wee et zap Ai hfi ede the 2 speaker 3 speaker and 5 speaker modes 2 and 3 speaker modes The reference and wide modes can be X The mode is not displayed if it cannot be selected selected for the sound field of the front 2 channel speakers This is X Once the surround parameters have been set stop
11. possibly cause damage to the speakers To avoid this be sure to switch the input mode to AUTO or DTS before playing CDs or LDs recorded in DTS Also never switch the input mode to ANALOG or PCM during playback The same holds true when playing CDs or LDs on a DVD player or LD DVD compatible player For DVDs the DTS signals are recorded in a special way so this problem does not occur X2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal processing output level adjustment sampling frequency conversion etc In this case the DTS encoded signals may be processed erroneously in which case they cannot be decoded by the AVR M330 or may only produce noise Before playing DTS signals for the first time turn down the master volume to a low level start playing the DTS disc then check whether the DTS indicator on the AVR M330 see page 31 lights before turning up the master volume X3 A DVD player with DTS compatible digital output is required to play DTS DVDs A DTS Digital Output logo is featured on the front panel of compatible DVD players Recent DENON DVD player models feature DTS compatible digital output consult the player s owner s manual for information on configuring the digital output for DTS playback of DTS encoded DVDs MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS INC U S PAT NO S 5 451 942 5 956 674 5 974 380 5 978 762 6 226 616 6 487 535 AND O
12. 004 Akai 016 027 046 GE 020 036 037 040 044 058 066 088 119 120 Alleron 062 125 147 A Mark 007 Goldstar 015 029 031 039 048 051 056 057 067 Amtron 061 068 069 116 165 Anam 006 007 036 Grundy 062 Anam National 061 147 Hitachi 029 031 051 052 070 111 112 113 124 134 AOC 003 007 033 038 039 047 048 049 133 Hitachi Pay TV 151 Archer 007 Infinity 017 071 Audiovox 007 061 Janeil 122 Bauer 155 JBL 017 071 Belcor 047 JC Penny 020 034 039 040 041 044 048 050 058 066 Bell amp Howell 045 118 0697076 0367090 095 125 136 159 Bradford 061 JCB 046 Brockwood 003 047 JVC 019 061 052 0727073 0917 117 126 Candle 003 030 031 032 038 047 049 050 122 Kawasho 018 046 Capehart 003 Kenwood 038 056 057 Celebrity 046 Kloss 010 032 Circuit City 003 Kloss Novabeam 005 122 127 131 Citizen 029 030 031 032 034 038 047 049 050 054 KTV 074 123 061 095 122 123 Loewe 071 Concerto 031 047 049 Logik 144 Colortyme 003 047 049 135 Luxman 031 Contec 013 051 0527061 LXI 008 014 017 024 040 044 063 071 075 076 Cony 051 052 061 O77 118 125 Craig 004 061 Magnavox 005 0107017 030 033 038 050 056 071 073 Crown 029 07950852089 1108 1097 110 127 151 152 145 Curtis Mathes 029 034 038 044 047 049 053 095 118 Marantz 015 017 071 080 Daewoo 027 029 039 048 049 054 055 106 107 137 Matsui 027 Daytron 003 049 Memorex 014 027 045 033 118 122 Di
13. 023 058 090 GE 007 011 049 050 051 052 073 080 087 Philco 015 016 049 Go Video 047 048 Philips 015 021 042 049 105 Goldstar 006 012 062 088 129 Pilot 088 Gradiente 094 Pioneer 005 013 029 06 037 08 065 05 Grundig 042 Portland 025 055 090 Harley Davidson 094 Proscan 063 080 Harman Kardon 040 062 Pulsar 060 Hi Q 091 Quartz 033 Hitachi 009 013 023 026 063 108 109 110 111 Quasar 034 035 049 JC Penny 004 005 007 023 028 049 062 Radio Shack 001 002 021 031 07 038 091 09 037 00S 085 087 088 115 Jensen 018 026 Radix 088 24 Samsung Sansul Sharp Sony Sylvania 007 013 019 023 058 063 064 065 073 080 082 087 007 011 051 059 070 083 087 089 113 005 026 029 045 061 085 114 013 023 028 031 033 053 054 088 091 098 099 115 001 002 021 097 075 076 077 078 079 121 122 009 015 016 017 041 048 094 Tandy Tatung Technics Totevision Vecrtor Research Video Concepts Yamaha 004 026 030 024 049 087 092 007 087 088 005 062 085 089 090 005 027 085 089 090 013 021 023 087 088 089 091 094 097 118 119 120 004 005 006 026 062 085 25 ENGLISH 5 Operating the TV video deck after storing its remote control signals in the preset memory Monitor TV TV and video deck VCR system buttons 2 2 S gaia BEN 3 0 D TV system buttons 5 TV
14. 11 I 5 M CH STEREO AUTO DECODE rd KT ed sedem 2277 CEAR IFE I I AA gt EE et O O RDS sm 29 AMP aD aT mm 1 Remote control unit button to automatically begin the RDS search operation 3 Press the TUNING UP or DOWN TVVOL Remote control unit 4 When a broadcast station is found that station s name appears on the display e f no RDS station is found when all the frequencies are searched NO PROGRAMME is displayed 7 PTY search Use this function to find RDS stations broadcasting a designated program type PTY For a description of each program type refer to Program Type PTY RANDOM button to automatically begin the PTY search operation 1 Set the band to FM 4 Press the TUNING UP or DOWN TVVOL Remote control unit Ce Press the RDS button until PTY l appears on the display CLEAR Remote control unit RDS 5 The station name is displayed on the display after searching stops Remote control unit i e f no station broadcasting the designated program type is found when all the frequencies are searched NO PROGRAMME is Watching the display press the PTY ENTER 3 button to call out the desired program A B REPEAT alspiaved type PTY Remote control unit 45 ENGLISH 8 TP search Use this function to find RDS stations broadcasting traffic program TP stations 1 Set the band to FM 3 Pre
15. 336 EEC och 93 68 EEC ATTENZIONE QUESTO APPARECCHIO EI DOTATO DI DISPOSITIVO OTTICO CON RAGGIO LASER L USO IMPROPRIO DELL APPARECCHIO PUO CAUSARE PERICOLOSE ESPOSIZIONI A RADIAZIONI SVENSKA NEDERLANDS ESPANOL ITALIANO FRANCAIS DEUTSCH NOTE ON USE HINWEISE ZUM GEBRAUCH OBSERVATIONS RELATIVES A L UTILISATION NOTE SULL USO NOTAS SOBRE EL USO ALVORENS TE GEBRUIKEN OBSERVERA Avoid high temperatures Allow for sufficient heat dispersion when installed on a rack e Vermeiden Sie hohe Temperaturen Beachten Sie da eine ausreichend Luftzirkulation gew hrleistet wird wenn das Ger t auf ein Regal gestellt wird e Eviter des temp ratures lev es Tenir compte d une dispersion de chaleur suffisante lors de l installation sur une tag re e Evitate di esporre l unit a temperature alte Assicuratevi che ci sia un adeguata dispersione del calore quando installate l unit in un mobile per componenti audio Evite altas temperaturas Permite la suficiente dispersi n del calor cuando est instalado en la consola e Vermijd hoge temperaturen Zorg voor een degelijk hitteafvoer indien het apparaat op een rek wordt geplaatst e Undvik h ga temperaturer Se till att det finns m jlighet till god v rmeavledning vid montering i ett rack e Handle the power cord carefully Hold the plug when unplugging the cord e Gehen Sie vorsichtig mit dem Netzkabel um Halten Sie das Kabel am Stecker
16. 6 1CH selected SBL preout used 1 channel for SB When 7 1CH selected SBL SBR preout used 2 channels O Playback signal present or selectable Mode selectable according to parameters For details see Tables 3 and 4 X No signal or not controllable 40 FLAG Selected automatically by DTS ES DISCRETE FLAG MATRIX FLAG PLII Compatible with PL II processing PL IIx Compatible with PL IIx processing NEO 6 Compatible with DTS NEO 6 processing B Table of Surround Mode Parameters 3 Presence absence of signals and controllability in the various modes Surround Mode Surround parameter DVS Dolby Virtual Speaker SEN Fay Wed DH Mode DH Dolby Headphone Default DEFEAT all OFF DVS Mode Digital 2 channel Analog 2 channel DH1 2 3 BYPASS SDB ON DRC ON 1 PEQ1 2 3 KO KEE Ge Front ch Her Aide STS SURROUN ul O 2 DTS SURROUND O 3 PLIIC AUTO ST DOLBY PLII DTS NEO 6 DOLBY PLIIx DOLBY DIGITAL EX PLIIx O O AUTO STEREO O O O AUTO DECODE DTS SURR NEO 6 DTS ES DISCRETE MATRIX x x x x 2SPEAKER MODE 3SPEAKER MODE O 6 Ref O 6 Ref 5SPEAKER MODE O 4 CINEMA O 4 CINEMA 5 DH1 Wide only O O O O O O O O O O BYPASS STEREO O DIRECT x O M CH STEREO O O O O O O O O O O O O O O O O O Q O O CINEMA only CINEMA only O O x x O x O x O O O x x x O x O x O x
17. BAND ON STANDBY Main unit OFF R Sie UF RR E END e After one second the currently set value is displayed Main unit Remote control unit Use the select a and buttons to select the item you want Press the MENU SET button for at least to set 2 dus MENU SET ea e f you do not want to change the value press the The display lights and QUICK MENU SET button to continue SETUP is displayed SAND d SELECT gt Main unit SU TUNING Main unit After going once through pressing the 5 MENU SET button the DHT M330DV is set back to the standby mode 2 ENGLISH 2 Speaker system layout Basic system layout e The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor 28 Center speaker system Subwoofer DSW M330 AV surround amplifier Front speaker systems SC AM330 Set these at the sides of the TV or Surround speaker systems screen with their front surfaces as flush SC AM330 with the front of the screen as possible D OPERATING THE SURROUND FUNCTIONS Achieving the optimum surround sound e Surround sound can be achieved using the settings made upon shipment from the factory the default settings but to achieve even more optimum surround sound we recommend using the test tones to adjust the levels of the different channels set the speaker distanc
18. Dolby Pro Logic IIx etc as well as PRE OUT connectors for surround back channels SBL and SBR e The DHT M330DV is also equipped with a pre out connector for a subwoofer channel so the system can be improved using a commercially available superwoofer with built in amplifier Signals are constantly output from the subwoofer pre out connector e A separately sold stereo amplifier and surround back speaker systems can be used in combination with the DHT M330DV to create a 6 1 or 7 1 channel surround system 1 Connections for a 6 1 or 7 1 channel system When using a commercially available amplifier and speakers e Use the front left front right center surround left and surround right channels with DHT M330DV connections e For a 6 1 channel system use the AVR M330 s SBL PRE OUT connector to connect the amplifier and one surround back speaker e For a 7 1 channel system use the AVR M330 s SBL and SBR PRE OUT connectors to connect the amplifier and two surround back speakers 2 6 1 or 7 1 channel speakers system layout Basic system layout e his is an example of a basic system layout using eight speaker systems and a TV enter speaker system Subwoofer Surround back speaker systems Front speaker systems Set these at the sides of the TV or screen with their front surfaces as flush with the front of the screen as possible Surround speaker systems 47 ENGLISH 3 6 1 or 7 1 channel surround playback
19. OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE DECLARATION OF CONFORMITY We declare under our sole responsibility that this product to which this declaration relates is in conformity with the following standards EN60065 EN55013 EN55020 EN61000 3 2 and EN61000 3 3 Following the provisions of 73 23 EEC 89 336 EEC and 93 68 EEC Directive BEREINSTIMMUNGSERKLARUNG Wir erkl ren unter unserer Verantwortung da dieses Produkt auf das sich diese Erkl rung bezieht den folgenden Standards entspricht EN60065 EN55013 EN55020 EN61000 3 2 und EN61000 3 3 Entspricht den Verordnungen der Direktive 73 23 EEC 89 336 EEC und 93 68 EEC DECLARATION DE CONFORMITE Nous d clarons sous notre seule responsabilit que l appare
20. POW Power on off 0 9 Channel numbers TV IN TV input switching H GAR TV VOL Volume up down TV CH Channel switching 2 Video deck system buttons VCR POW Power on off VCR CH Channel switching 2 lt lt gt gt Manual search fast forward and fast backward gt Play H Pause E Stop 1 Set mode switch 1 to the DVD position DVD CD aA MD 2 Set mode switch 2 to the TV VCR position Tuner TV VCR ml CTD mD f TAPE Am mh Operate the video component e For details refer to the component s operating instructions X t may not be possible to operate some models NOTE e The TV s TV POWER and TV IN buttons can be operated as long as mode switch 1 is set to the DVD position regardless of the position of mode switch 2 26 SETTING UP THE SYSTEM 1 Quick setup procedure e Generally used system settings have already been made on the DHT M330DV upon shipment from the factory so the DHT M330DV can be used as such if there is no need to make changes to the system e n the cases described below use the Quick Setup function to make the system settings before using the DHT M330DV D When expanding the system configuration to a 6 1 or 7 1 channel system see page 13 47 48 2 When installing the speakers in a large room select at ROOM SETUP below 3 When setting the TAPE function to the TV AUX1 function and connecting both the digital
21. SL SR and SB channels 3 ENGLISH Dolby Virtual Speaker Dolby Virtual Speaker technology uses proprietary technology of Dolby Laboratories to create a virtual surround sound field using only two speakers for the front channels allowing the user to experience sound as if surround speakers were actually being used HM Features of Dolby Virtual Speaker sound Accurate surround sound field positioning The virtual surround speakers are positioned at 105 to the left and 105 to the right Multi channel programs played according to the producer s intentions The sound of the different channels is played in the position set upon mixing For example sound set at the rear left is heard from the rear left Stereo programs played in surround The Dolby Pro Logic II circuit is used together with the Dolby Virtual Speaker circuitry to create a rich virtual surround sound field with stereo programs as well Selecting the listening mode Two listening modes are provided Reference and Wide P e Bis 2 front channels b Virtual sound field created with the Dolby Virtual Speaker mode ei Wl Reference mode Wide mode With the AVR M330 playback in the Dolby Virtual Speaker mode is possible with other speaker configurations as well e 3 speakers 2 front channels center Reference Wide modes e 5 speakers 2 front channels center 2 surround channels Wide mode
22. Switch1 to DVD OROKO Switch2 to AMP ORoBols DvD mM Zus O aD cm 1 z 2 m W r m 1 D 0 Oo 1 Select and play the desired function 4 The power is set to the standby mode 50 minutes later 2 Press the SLEEP button X To turn the sleep timer off press the SLEEP button repeatedly until e 120 is displayed and the SLEEP indicator flashes the SLEEP indicator turns off The sleep timer can also be turned off by press the power button on the main unit or the remote control unit to turn the entire system s power to the SLEEP standby mode ON STANDBY SLEEP OFF Remote control unit X The display switches as follows each time the SLEEP Remote control unit Main unit Remote control unit button is pressed oem 60 50 40 30 20 10 SLEEP indicator off When the SLEEP indicator is flashing press the SLEEP button again until 50 is displayed e 50 is displayed and the SLEEP indicator flashes SLEEP EN Remote control unit e After 4 seconds the display returns to as it was before the sleep timer was set and the SLEEP indicator stops flashing remaining lit This completes the sleep timer setting 53 ENGLISH 15 SYSTEM FUNCTIONS Bl Making system connections between the AVR M330 and the DVD player DVD M330 makes operation even easier For instructions on connections refer to Connecting the audio components on pages 14 E System funct
23. X XI XI X x O HALL O E Table of Surround Mode Parameters 4 Details of parameters for 6 1CH 7 1CH Presence absence of signals and controllability in the various modes Surround Mode Various playback sources and surround parameter selection for 6 1CH 7 1CH DVS Dolby Virtual Speaker DOLBY DIGITAL D D EX DTS DTS ES DH Dolby Headphone PCM Analog 6 1 7 1 setting 6 1 7 1 setting 6 1ch setting 7 1ch setting 6 1ch setting 7 1ch setting AUTO STEREO DTS NEO 6 CINEMA DTS NEO 6 MUSIC DOLBY PLIIx CINEMA DOLBY PLIIx MUSIC DOLBY PLIIx GAME DOLBY DIGITAL EX DOLBY DIGITAL PLIIx C DOLBY DIGITAL PLIIx M DTS SURROUND DTS SURR NEO 6 2channel source e O O O O O O O O O O x OQ CO OF XK x O O OC OC OF XK x BIIS ESIDISCREIIE O FLAG O FLAG DTS ES MATRIX O FLAG O FLAG Mulch channel source Mode only usable when 5 1CH set with quick setup procedure Factory defaults when 6 1CH or 7 1CH set with quick setup procedure Mode only usable when 6 1CH or 7 1CH set with quick setup procedure O Playback signal present or selectable FLAG Selected automatically by DTS ES DISCRETE FLAG MATRIX FLAG X Playback signal absent or not selectable Not applicable Factory defaults of parameters 1 Only selectable for Dolby and DTS DRC dynamic range compression co
24. el s DOLBY DIGITAL EX PLIIx A A A A 2SPEAKER MODE O x x O x 5SPEAKER MODE O O O O x O H P ONLY x x x x SEE i O H P ONLY x x x x BYPASS O H P ONLY x x x STEREO O x x O H PX x DIRECT 6 x x O H PX x 5CH STEREO O O O O x M CH STEREO A A A A A HALL O Q O O A E Table of Surround Mode Parameters 2 Presence absence of signals and controllability in the various modes Surround Mode Playback signals and surround modes for the various input functions DVS Dolby Virtual Speaker DVD TV AUX1 AUX2 DVD TUNER MD TAPE DH Dolby Headphone When playing Dolby Digital signals oe When playing PCM signals ae GE 2 channel Multi channel EX Multi channel ES 2 channel Fs 96kHz 2 channel DOLBY DIGITAL x O x x x x DTS SURROUND x x T DOLBY PLII x ePLII S AUTO STEREO x x A DTS NEO 6 x NEO 6 DOLBY PLIIx x ePLIIx ia DOLBY DIGITAL EX PLIIx x x DTS SURR NEO 6 x x DTS ES DISCRETE MATRIX x x 2SPEAKER MODE x O 3SPEAKER MODE x O 5SPEAKER MODE x O DH1 x PLI T DH2 x PLI E DH3 x el BYPASS x O STEREO O O O O DIRECT O O O O eseo To d o M CH STEREO O x O HALL O x O Mode only usable when 5 1CH set with quick setup procedure Mode only usable when 6 1CH or 7 1CH set with quick setup procedure D MIX Compatible with down mixing A Usable when 6 1CH or 7 1CH selected at the Quick Setup procedure When
25. is pressed Select the value closest to the actually measured distance X Make sure the difference of the distances set for the different speakers is no more than 4 5 meters If an inappropriate distance is set the distance display will flash Change the position of the speaker and reset Once the settings are completed use the CH SELECT button to select END The settings are completed if no operations are performed for several seconds e The display returns to normal CH SELECT Remote control unit Use the select button while the above 2 is displayed to select DELAY e The level display shown below appears 3 Remote control unit Press the CH SELECT button on the CH SELECT remote control unit to select the speaker whose distance is to be set N time the CH SELECT button is X The mode switches as follows each pressed Remote control unit CENTER SURROUND END e When the 6 1 or 7 1 channel mode is set the surround back channel can also be selected and adjusted FRONT SW 39 ENGLISH B Table of Surround Mode Parameters 1 Presence absence of signals and controllability in the various modes rg Speaker SPEAKER SP PREOUT PREOUT DH Dolby Headphone cw CENTER SURROUND L R SUB WOOFER SUB WOOFER DOLBY DIGITAL O O O O x El en DOLBY PLII O O O O x S AUTO STEREO O x x O x ae
26. on off Main volume up Main volume down MUTING Muting on off SOUND ENHANCER Sound enhancer selection SDB P EQ SDB PEO selection and setting SURROUND Surround parameter selection and setting PARAMETER CH SELECT Channel level Delay time selection and setting LA gt 2 DVD control buttons gt Play auto power on and auto function selection bs Stop lt lt gt l Skip cueing 44 kb Search fastreverse and fast forward Hu Pause and frame by frame 3 Tuner control buttons CH Preset channel up down auto power on and auto function selection 1 Set mode switch 1 to the DVD position DVD CD a MD 2 Set mode switch 2 to the position of the function you want to operate DVD TUNER or AMP TUNER TV VCR il IR MD 3 1 TAPE 17 ENGLISH 3 Operate the DHT M330DV 1 Surround amplifier system buttons Operated with mode switch 2 set to AMP e These operations are possible with mode switch 1 at any position SLEEP Sleep on off DVD Function DVD TUNER Function TUNER TV AUX1 Function TV AUX1 TAPE Function TAPE AUX2 Function AUX2 SCH STEREO 5ch stereo mode set AUTO DECODE Auto decode mode set VIRTUAL Dolby VS surround mode set or 2 1 3 1 5 1ch mode switching when Dolby VS mode STEREO Stereo mode set DIRECT Direct mode set lt gt Selection left and right RC 996 18 2 DVD system butto
27. phase component to the surround SL and SR channels e NEO 6 MUSIC mode This mode is suited mainly for playing music The front channel FL and FR signals bypass the decoder and are played directly so there is no loss of sound quality and the effect of the surround signals output from the center C and surround SL and SR channels add a natural sense of expansion to the sound field 3 Playing in the Dolby Virtual Speaker mode e The Dolby Virtual Speaker mode is a mode using 3D sound technology from Dolby Laboratories to achieve multi channel surround sound using only two speakers for the front channels e With two speakers for the front channels one of two modes can be selected Reference or Wide e The Dolby Virtual Speaker mode can be used not only with Dolby Digital and DTS multi channel sources but also with 2 channel sources 1 Playing Dolby Virtual Speaker Set the surround mode to DOLBY VIRTUAL SPEAKER Applicable sources 1 e Digital input DVD TV AUX1 AUX2 functions SURROUND MODE TEN Dolby Digital multi channel sources SUR MUDE DTS sources ai PCM sources Except Fs 96kHz PCM e Analog input DVD TUNER TAPE functions Main unit Remote control unit e In the Dolby Virtual Speaker mode this indicator lights nuvs 4 2 Play a program source e he Dolby Digital indicator lights Ip DIGITAL Lit when playing Dolby Digital sources e The DTS indicator lights when DTS Lit
28. the FM band is a broadcasting service which allows station to send additional information along with the regular radio program signal The following three types of RDS information can be received on this unit E Program Type PTY PTY identifies the type of RDS program The program types and their displays are as follows News Rock Music Phone In Affairs Easy Listening Travel amp Touring Leisure amp Information Light Classical Hobby Sports serious Classical Jazz Music Education Other Music Country Music Weather amp Drama Meteorological National Music Culture Finance Oldies Music Children s Science Progs Folk Music Varied Social Affairs Documentary Pop Music Religion Bl Traffic Program TP TP identifies programs that carry traffic announcements This allows you to easily find out the latest traffic conditions in your area before you leaving home Bl Radio Text RT RT allows the RDS station to send text messages that appear on the display NOTE The operations described below using the RDS PTY and RT buttons will not function in areas in which there are no RDS broadcasts 44 ENGLIS 6 RDS search Use this function to automatically tune to FM stations that provide RDS service 1 Set the band to FM MANDUM Set the remote control selector A ee 2 e55 C oso amp 2 Switch es PROG DIRECT m Remote control unit Switch to DVD GI EH Switch2 to TUNER 9 EI pi
29. wenn Sie den Stecker herausziehen e Manipuler le cordon d alimentation avec pr caution Tenir la prise lors du d branchement du cordon e Manneggiate il filo di alimentazione con cura Agite per la spina quando scollegate il cavo dalla presa e Maneje el cord n de energ a con cuidado Sostenga el enchufe cuando desconecte el cord n de energ a e Hanteer het netsnoer voorzichtig Houd het snoer bij de stekker vast wanneer deze moet worden aan of losgekoppeld e Hantera n tkabeln varsamt H ll i kabeln n r den kopplas fr n el uttaget Keep the set free from moisture water and dust e Halten Sie das Ger t von Feuchtigkeit Wasser und Staub fern Prot ger l appareil contre l humidit l eau et lapoussi re Tenete l unit lontana dall umidit dall acqua e dalla polvere e Mantenga el equipo libre de humedad agua y polvo e aat geen vochtigheid water of stof in het apparaat binnendringen e Uts tt inte apparaten f r fukt vatten och damm ZR e Unplug the power cord when not using the set for long periods of time e Wenn das Ger t eine l ngere Zeit nicht verwendet werden soll trennen Sie das Netzkabel vom Netzstecker e D brancher le cordon d alimentation lorsque l appareil n est pas utilis pendant de longues p riodes Disinnestate il filo di alimentazione quando avete l intenzione di non usare il filo di alimentazione per un lungo periodo di tempo Desconecte el cord
30. 3L Type Speaker Speaker impedance Frequency range Max input Dimensions Mass Front 17 W 17 W 6 Q ohm load 1 kHz T H D 10 96 Center 20 W 6 Q ohm load 1 kHz T H D 10 96 Surround 17 W 17 W 6 Q ohm load 1 kHz T H D 10 96 Subwoofer 20 W 6 Q ohm load 1 kHz T H D 10 96 Speaker impedance 6 to 16 ohms 400 mV 47 kQ kohms 10 Hz to 50 kHz 0 3 dB LINE Direct mode 90 dB LINE Direct mode FM 87 5 MHz to 108 MHz AM 522 kHz to 1611 kHz FM 1 8 uV 75 Q ohms AM 20 uV 35 dB 1 kHz Format Digital audio interface Sleep timer 120 minutes maximum 230 V AC 50 Hz 75 W At standby Approximately 1 VV 210 W x 70 H x 325 D mm including feet knobs and connectors 3 9 Kg RC 996 IR pulse method 3 V DC using two AA batteries 2 way 2 speakers Closed box Low leakage flux 5 7 cm cone bass mid x 1 2 5 cm super high range x 1 6 Q ohms 30 watts IEC 80 watts PEAK 79 W x 140 H x 123 D mm 0 7 kg 2 way 3 speakers Closed box Low leakage flux 5 7 cm cone bass mid x 2 2 5 cm super high range x 1 6 Q ohms 30 watts IEC 80 watts PEAK 210 W x 79 H x 133 D mm 1 0 kg 1 way 1 speaker Reflex box Low leakage flux 16 cm cone woofer x 1 6 Q ohms 30 Hz 240 Hz 60 watts 210 W x 322 H x 304 D mm including base 4 9 kg including base Design and specifications are subject to change without notice in the course of product improveme
31. 45 046 085 Aiko 095 Kenwood 004 005 006 026 029 033 045 085 090 Aiwa 009 Kodak 088 Akai 026 027 070 072 082 083 084 Lloyd 009 094 Alba 055 LXI 088 Amstrad 009 Magnavox 015 016 042 049 063 106 ASA 042 Magnin 087 Asha 087 Marantz 004 005 006 015 042 049 085 090 Audio Dynamic 005 085 Marta 088 Audiovox 088 MEI 049 Beaumark 087 Memorex 009 033 049 053 060 081 087 088 091 094 Broksonic 086 093 115 Calix 088 Metz 123 124 125 126 127 128 Candle 006 087 088 089 090 MGA 001 017 027 041 097 Canon 0497057 MGN Technology 087 Capehart 025 055 056 071 Midland 011 Carver 015 Minolta 0192023 CCE 095 Mitsubishi 001 003 008 013 014 017 027 029 039 040 Citizen 006 007 087 088 089 090 095 041 045 097 Craig 007 087 088 091 115 Motorola 081 Curtis Mathes 006 049 073 080 087 090 092 Montgomery Ward 001 002 007 009 049 063 081 115 117 Cybernex 087 MTC 009 087 094 Daewoo 025 055 059 074 089 093 095 096 Multitech 007 009 011 087 090 094 Daytron 025 055 NAD 038 DBX 005 085 NEC 004 005 006 018 026 029 045 061 062 085 Dumont 053 Nikko 088 Dynatech 009 Noblex 087 Electrohome 001 088 097 Optimus 081 088 Electrophonic 088 Optonica 021 Emerson 001 009 017 027 086 088 089 092 093 097 Panasonic 024 049 064 066 067 068 069 107 100 101 102 103 104 117 Perdio 009 Fisher C09 023 03 17 053 EE 115 Pentax 006 013
32. DENON HOME THEATER SYSTEM DHI M330DV OPERATING INSTRUCTIONS BEDIENUNGSANLEITUNG MODE D EMPLOI ISTRUZIONI PER L USO INSTRUCCIONES DE OPERACION GEBRUIKSAANWIJZING BRUKSANVISNING AVR M330 DVD M330 Df es zz l SC AM330 SC CM330 DSW M330 SC AM 330 e DVD M330 DVD PLAYER Please refer to the operating Instructions of the DVD M330 e DVD M330 DVD PLAYER Bitte beziehen Sie sich auf die Bedienungsanleitung des DVD M330 e DVD M330 LECTEUR DVD Veuillez vous r f rer au mode d emploi du DVD M330 e DVD M330 LETTORE DVD Fare riferimento al manuale delle istruzioni del modello DVD M330 e DVD M330 REPRODUCTOR DVD Consulte las instrucciones de funcionamiento del DVD M330 e DVD M330 DVD SPELER Zie de gebruiksaanwijzing van de DVD M330 e DVD M330 DVD SPELARE L s bruksanvisningen till DVD M330 FOR ENGLISH READERS PAGE 4 PAGE 57 FUR DEUTSCHE LESER SEITE 58 SEITE 111 POUR LES LECTEURS FRANCAIS PAGE 112 PAGE 165 PER IL LETTORE ITALIANO PAGINA 166 PAGINA 219 PARA LECTORES DE ESPANOL PAGINA 220 PAGINA 273 VOOR NEDERLANDSTALIGE LEZERS PAGINA 274 PAGINA 327 FOR SVENSKA LASARE SIDA 328 SIDA 381 ENGLISH DEUTSCH FRANCAIS ITALIANO ESPANOL NEDERLANDS SVENSKA CAUTION RISK OF ELECTRIC SHOCK DO NOT
33. Dolby Headphone Dolby Headphone is a 3D sound technology developed jointly by Dolby Laboratories and Lake Technology of Australia achieving surround sound with regular headphones Normally when using headphones all the sounds are sounded in the head making it uncomfortable to listen with headphones for long periods of time Dolby Headphone simulates speaker playback in a room and positions the sound sources to the front or the sides outside of the head achieving a powerful sound similar to that of a movie theater or home theater This technology is aimed mainly at multi channel audio or video equipment including Dolby Digital or Dolby Pro Logic Surround decoding functions and operates inside a high performance digital signal processing chip DSP The Dolby Headphone mode can be used not only with multi channel sources but also with stereo programs 52 USING THE SLEEP TIMER 1 Setting the sleep timer remote control unit only e The included remote control unit can be used to turn the power to the standby mode after a maximum of 120 minutes Sleep timer e Use this function to automatically switch the power to the standby mode after a specific amount of time minutes Example To set the power to the standby mode in 50 minutes according to the clock Be sure to correct the current time setting e Operate the remote control unit at the AMP position Set the remote control selector C RDS u Cun switches
34. ECT ap PARAMETER REPEAT Repeat play setting PROG DIRECT Program direct playback selection 3 CALL Program calling Reue 1 10 10 Track number selection lt lt kl Auto search cueing 44 gt gt Manual search fast reverse and fast forward gt M Play M H Pause 1 Set mode switch 1 to the MD position Stop Blue print DVD CID t o 2 Tape deck system button operated with mode switch 2 set to TAPE 2 Set mode switch 2 to the position for the component to be operated MD or TAPE Oo Blue print at C em Cun Gon TUNER AMP CLEAR n TVCH TVCH AMP GD ED a ume Y Cua gt TV AUXI T MD 1 ve dm mb P Operate the audio component e For details refer to the component s operating instructions X Operation may not be possible for some models REC Recording CD SRS CD synchronized recording lt a gt gt Rewind and fast forward Forward direction play TAPE Reverse direction play E Stop 20 4 TV and video deck preset memories e Components of other brands can be operated with the included remote control unit by storing their codes in the preset memory Note that depending on the model some operations may not be possible and some buttons may not operate properly Press the TV button to preset a TV the VCR button to preset 4 a video deck then input the 3 digit number corresponding to the brand of the co
35. ER L SC AM330 SC CM330 SC AM330 6 o UM es UB Cord B 3m Cord B 3m AV SURROUND RECEIVER AVR M330 Z qa nz OG ep SS An ANT A le e INT DIGTAL ANTENNA VD AUDIO S SL KER SYSTEMS Cord A 10m SURROUND SPEAKER R SC AM330 SUBWOOFER SURROUND SPEAKER L DSW M330 SC AM330 Description of speaker label e Use connection cords of the Precautions when connecting speakers PENON e colors corresponding to the If a speaker is placed near a TV video monitor the colors on the Ve INPUT SOWIECIEIAJ much position of speaker installation screen may be disturbed by the speaker s magnetism If this E C an and connect to the AV surround should happen move the speaker away to a position where it does IEN better TEIBELT lt KEEN amplifier not have this effect Locate as a color tag of connected cable indicates below ENGLISH Be sure to turn the amplifier s power off when connecting the speaker systems e Use the included cables to connect the input terminals on the back of the speaker systems see diagram to the amplifier s speaker output terminals Inverting the polarities will result in unnatural sound with the phase off or no low bass sound e Connect the side of the included connection cord with the colored label to the plus side e Conn
36. OP ANT de AU FM COAX 75 O DIGTAL IN OPT ANTENNA AUDIO ACTIVE SUBWOOFER IN Tape OUT 6 Using SURROUND BACK PRE OUT SBL SBR e Use SURR BACK PRE OUT jack to connect additional POWER AMPLIFIER and speaker systems You can enjoy 6 1CH or 7 1CH surround system e When making connections also refer to the operating instructions of the other components e To make the 6 1 or 7 1 channel setting set the speakers to 6 1CH or 7 1CH in the quick setup and select Room Setup See pages 27 AV SURROUND RECEIVER AVR M330 A 1 SYSTEM CONNECTOR AUXI AUX2 FM C0AX 75 O DIGTAL IN OPT ANTENNA IN OUT DVD uno FE POWER AMPLIFIER for SURR BACK ch e Connect the power amplifier for SURR BACK speaker system 13 ENGLISH 7 Connecting the audio components DVD M330 e The AVR M330 can be used connected in a system with the DVD M330 DVD player e For instructions on operating the DVD M330 DVD player refer to their respective operating instructions e Only the DVD M330 DVD player can be connected directly to the AVR M330 using system connections NOTES e This system includes digital circuitry which may cause interference such as color blotching or changes in the color on TVs If this happens move the system and the TV as far apart as possible e Do not plug the power cord into the power outlet until all connections are completed Be sure to interconnect the chan
37. THER U S AND WORLD WIDE PATENTS ISSUED AND PENDING DIS DTS ES AND Neo 6 ARE TRADEMARKS OF DIGITAL THEATER SYSTEMS INC 1996 2003 DIGITAL THEATER SYSTEMS INC ALL RIGHTS RESERVED 50 ENGLIS DTS ES Extended Surround DTS ES Extended Surround is a new multi channel digital signal format developed by Digital Theater Systems Inc While offering high compatibility with the conventional DTS Digital Surround format DTS ES Extended Surround greatly improves the 360 degree surround impression and space expression thanks to further expanded surround signals This format has been used professionally in movie theaters since 1999 In addition to the 5 1 surround channels FL FR C SL SR and LFE DTS ES Extended Surround also offers the SB Surround Back sometimes also referred to as Surround center channel for surround playback with a total of 6 1 channels DTS ES Extended Surround includes two signal formats with different surround signal recording methods as described below B DTS ES Discrete 6 1 DTS ES Discrete 6 1 is the newest recording format With it all 6 1 channels including the SB channel are recorded independently using a digital discrete system The main feature of this format is that because the SL SR and SB channels are fully independent the sound can be designed with total freedom and it is possible to achieve a sense that the acoustic images are moving about freely among the background sounds surround
38. ack channel pre out connectors When the 6 1 or 7 1 channel mode is set with the Quick Setup function the unit is compatible with decoding of various types of multi channel formats e Dolby Digital EX e DTS ES e Dolby ProLogic IIx X A commercially available amplifier and speaker must be connected to the DHT M330DV s surround back channel pre out connector in order to achieve 6 1 and 7 1 channel playback 5 CONNECTIONS e Do not plug in the AC cord until all connections have been e Note that binding pin plug cords together with AC cords or placing completed them near a power transformer will result in generating hum or e Be sure to connect the left and right channels properly left with other noise left right with right e Noise or humming may be generated if a connected audio e Insert the plugs securely Incomplete connections will result in equipment is used independently without turning the power of the generation of noise this unit on If this happens turn on the power of the this unit 1 Speaker system connections e When connecting use connection cords A and B included with the DHT M330DV The connection cords are color coded by different colored plugs and labels Connect in such a way that the colors are the same as the AV surround receiver s speaker terminals e Connect the side of the included connection cord with the colored label to the plus side FRONT SPEAKER R CENTER SPEAKER FRONT SPEAK
39. and analog inputs set FUNC SETUP below to TV AUXA Quick system settings Factory default Settings Display lt 6 1 CHS T ACH 2 front channels 2 front channels EE Select the speaker configuration you zen 2 a Center channel Center channel configuration plan to use sener ne 2 surround channels 2 surround channels SPEAKER SETUP 2 surround channels Surround back channel 2 surround back channels Subwoofer channel Subwoofer channel SI3 0X45 M 4 5X5 4 L 6 0X6 0 Room settings ROOM SETUP Select the speaker installation space Equivalent to 3 6 x 4 5 Equivalent to 4 5 x 5 4 Equivalent to 6 0 x 6 0 meters meters meters ABE MD lt TV AUX1 gt Subwoofer channel Select the TAPE or MD function analog input output connectors only Use analog input output Function settings or the TV AUX1 function analog Use as analog Use as analog connectors TAPE and FUNC SETUP input output connector input output connector digital input connector TAPE function MD function TV AUX1 as the TV AUX1 function input output connectors and digital input connectors Quick Setup procedure The items you want to set are displayed MENU SET 3 each time the MENU SET button is pressed for less than 1 second e The item changes each time the 1 Turn off the power button is pressed as follows e The standby mode is set and the power indicator turns red
40. annel also called the 1 channel containing bass frequencies of up to 120 Hz Unlike the analog Dolby Pro Logic format Dolby Digital s main channels can all contain full range sound information from the lowest bass up to the highest frequencies 22 kHz The signals within each channel are distinct from the others allowing pinpoint sound imaging and Dolby Digital offers tremendous dynamic range from the most powerful sound effects to the quietest softest sounds free from noise and distortion E Dolby Digital and Dolby Pro Logic Comparison of home surround systems Dolby Digital Dolby Pro Logic No recorded channels elements 5 1 ch 2 ch No playback channels 5 1 ch 4 ch Playback channels max L R C SL SR SW L R C S SW recommended Digital discrete processing Dolby Digital encoding decoding Audio processing Analog matrix processing Dolby Surround High frequency playback limit of surround 20 kHz 7 kHz channel E Dolby Digital compatible media and playback methods Marks indicating Dolby Digital compatibility DM oosy i The following are general examples Also refer to the player s operating instructions Media Dolby Digital output jacks Playback method reference page pe Set the input mode to AUTO LD VDP Coaxial Dolby Digital RF output jack 71 Page 30 DVD Optical or coaxial digital output Set the input mode to AUTO same as for PCM X2 Page 30 Others Opt
41. convenient when it is difficult to install operating the buttons After several seconds the normal a surround speaker display reappears and the settings are automatically 5 speaker mode The sound is played in the wide mode entered expanding the 5 1 channel playback and front 2 channel speaker sound field This is convenient when the front speakers cannot be moved very far apart e Switch between the reference and wide modes by selecting the surround parameters in steps 3 and 4 4 Playing in the DSP surround modes e This unit is equipped with a high performance DSP Digital Signal Processor which uses digital signal processing to synthetically recreate the sound field One of 2 preset surround modes can be selected according to the program source Analog and PCM sources only Except 96kHz PCM source 1 5CH STEREO The Front left channel signals are output to the surround and surround back signal left channels the front right M CH STEREO channel signals are output to the surround and surround back signal right channels and the in phase component of the left and right channels is output to the center channel Use this mode to enjoy stereo sound 2 HALL When playing recordings of live music this mode provides a feeling similar to actually being in a concert hall When this mode is selected the normal program source is directed to the main speakers and a reverberated sound is directed to the surround speakers This mo
42. d on or input function Surround mode or any other set up is changed If the volume is turned up during this time the output will be very high after the muting circuit stops functioning Always wait until the muting circuit turns off before adjusting the volume Whenever the power switch is in the STANDBY state the apparatus is still connected on AC line voltage Please be sure to unplug the cord when you leave home for say a vacation 2 SPEAKER SYSTEM SYS M330 e Note that color blotching may occur on a TV etc due to interaction with the speaker system if there is a magnet or an object generating magnetic force nearby Examples a When there are magnets on the door of the rack stand etc b When a health device etc equipped with magnets is placed nearby c When toys or other objects using magnets are placed nearby e Note that the illustrations in this instructions may differ from the actual set for explanation purposes Be sure to keep the operating instructions After reading these operating instructions store them in a safe place We also recommend filling in the necessary items on the back cover 4 FEATURES 1 Dolby Digital Using advanced digital processing algorithms Dolby Digital provides up to 5 1 channels of wide range high fidelity surround sound Dolby Digital is the default digital audio delivery system for DVD DTS Digital Theater Systems and DTS NEO 6 DTS provides up to 5 1 channels of wide
43. ddition to the main unit Q Operating Instructions a 1 Service station NSE a 1 Remote control unit RC 996 1 4 R6P AA batteries s r 2 AM loop antenna ees 1 FM indoor antenna nenn 1 D Optical cable 4 eee etit e ees 1 4 5 D gt ZU EE 2 O Cord KE 1 Used to connect the Speakers Used to connect the Speakers Length Approx 10 meters Length Approx 3 meters 1 BEFORE USING Pay attention to the following before using this unit Moving the set To prevent short circuits or damaged wires in the connection cords always unplug the power cord and disconnect the connection cords between all other audio components when moving the set Before turning the power switch on Check once again that all connections are proper and that there are not problems with the connection cords Always set the power switch to the standby position before connecting and disconnecting connection cords 2 CAUTIONS ON INSTALLATION 1 AV SURROUND RECEIVER AVR M330 Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV If this happens take the following steps e Install this unit as far as possible from the tuner or TV e Set the antenna wires from the tuner or TV away from this unit s power cord and input output connection cords e Noise or disturbance tends to occur particula
44. de is suited to program sources which contain a large amount of reverberation Personal Memory Plus This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the input different sources When the input source is switched the modes set for that source last time it was used are automatically recalled e Settings automatically stored in the memory for the individual input functions using the Personal Memory Plus function D Surround mode including 2 channel decode mode and Dolby Pro Logic II mode settings 2 Input mode selection function X The surround parameters SDB P EO control settings and playback level balance for the different output channels are memorized for each surround mode 37 ENGLISH 5 Playback using the Dolby Headphone mode The AVR M330 is equipped with the Dolby Headphone mode a technology developed jointly by Dolby Laboratories and Lake Technology for achieving 3D sound over regular headphones The Dolby Headphone mode is set when headphones are connected to the AVR M330 s headphones jack There are actually four Dolby Headphone modes creating different sound field effects DH1 DH2 DH3 and Bypass normal stereo playback The Dolby Headphone mode is compatible with Dolby Digital and DTS multi channel sources With 2 channel sources playback in the Cinema and Music modes can be selected with the 2 channel mode setting Set the va
45. e see page 48 The DTS ES decoder includes another function the DTS Neo 6 surround mode for 6 1 channel playback of digital PCM and analog signal sources B DTS Neo 6 surround This mode applies conventional 2 channel signals to the high precision digital matrix decoder used for DTS ES Matrix 6 1 to achieve 6 1 channel surround playback High precision input signal detection and matrix processing enable full band reproduction frequency response of 20 Hz to 20 kHz or greater for all 6 1 channels and separation between the different channels is improved to the same level as that of a digital discrete system DTS Neo 6 surround includes two modes for selecting the optimum decoding for the signal source e DTS Neo 6 Cinema This mode is optimum for playing movies Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2 channel sources as with 6 1 channel sources This mode is effective for playing sources recorded in conventional surround formats as well because the in phase component is assigned mainly to the center channel C and the reversed phase component to the surround SL SR and SB channels e DTS Neo 6 Music This mode is suited mainly for playing music Changes in the sound quality are reduced by decoding with emphasis on the front channel signals FL and FR and a natural sense of expansion is given to the sound field by the effect of the surround signals output from the center C and surround
46. e channels then played in the Dolby Headphone mode In the Bypass mode these are not displayed CINEMA Dolby Pro Logic II Cinema mode Main unit Remote control unit MUSIC as Dolby Pro Logic II Music mode 6 Setting the speaker distance e Input the distances from the listening position to the speakers and set the surround delay time e The default settings below are set upon shipment from the factory Preparations Measure the distances from the listening position to the speakers L1 to L3 on the diagram at the right L1 Distance from center speaker to listening position L2 Distance from front speakers to listening position L3 Distance from surround speaker to listening position FL Center FR Listening position EN SR e Operate the remote control unit at the AMP position O O O v O ma a i Gu aD qr nm 1 TAPE Set the remote control selector switches Switch1 to DVD Switch2 to AMP TV VCR il t m 1 TAPE a LLI gt lt Q TAPE HI DENON RC 996 CH SELECT D Remote control unit remote control unit e The following is displayed 1 Press the CH SELECT button on the 4 While the delay time is displayed use the select lt and gt buttons to set the JI S distance between the speaker and SG listening position A e The value changes in units of 0 3 meters each time the select lt or gt Remote control unit button
47. ect connection cords A 10 meters and B 3 meters as follows To the AVC M330 s speaker terminals To the various speaker terminals rR fes alm C i C Green a Green 2 Insert the cord s core wires into the hole FL White et Set wwe SR Gray ef pa ee Gray sw Purple ek Cee st Be e M Cs D Press the terminal s lever down 3 Release the lever Connecting the speaker cords Use the included connection cords to connect the input terminals on the backs of the speaker systems see the diagram to the AVR M330 s speaker output terminals e Insert the connection cords plugs securely to the back Incomplete connections will cause noise and malfunction D Connect according to the speaker terminals colors 2 Insert the plug securely to the back until a click is heard Lock lever Red green and white Raise the lock lever to insert Gray violet and blue Lower the lock lever to insert 3 To disconnect press the lock lever and pull out Replacing the speaker connection cords e The speaker connection cords can be replaced for example when you want to extend the included connection cords D Press the release button on the side opposite the lock level to 2 dem 10mm detach the cord from the plug 7H klen 2 gt 2 Peel off the sheathing at the tip of the cord you want to replace oe l p T button and twist firmly so the tip remains tightly wound R lt x 3 Pressin
48. ected This may be noise from a TV or interference from a radio station Replace with new batteries Move closer Remove obstacle Press the proper button Insert batteries properly Press the remote control mode selection button for the item you wish to operate To operate this unit use with the DVD mode Connect the antenna cable properly Connect an outdoor antenna Turn off the TV Change the position and direction of the AM loop antenna 12 Humming noise is heard when receiving AM programs The radio waves transmitted over the power cord are being modulated Unplug the power cord flip the plug over in the opposite direction then plug the cord back in 12 96 SPECIFICATIONS E Audio Section Power Amplifier Section Rated output Output terminals e Analog Section Input sensitivity Input impedance Frequency response Signal to noise ratio EM Tuner Section Reception frequency range Receiving sensitivity FM stereo separation e Digital Section Digital input output Timer Section Timer General Power supply Power consumption Maximum external dimensions Weight HM Remote Control Unit Remote control method Power supply HM Speakers SYS M330 e Satellite speaker system SC AM330 Type Speakers Input impedance Max input Dimensions Mass e Center speaker system SC CM330 Type Speaker Input impedance Max input Dimensions Mass e Subwoofer DSW
49. ector DUTION uscita so tiec ann 30 E Mode selector switches 1 and 3 17 18 20 21 26 36 Main volume tee 31 3 7 Muting button 32 D Transmission indicator 38 SDB REQ DUTTON ee 32 Q Sleep Umer BUTON aa een 53 39 Enter button NTSC PAL button Cursor button O Clear button 41 Surround parameter button ans na 34 36 38 O A B repeat button 42 Top menu button Q Program direct 5 Menu button Repeat button 44 Subtitle button O Input source surround mode selector button 45 System DU ON ae 18 20 26 System DU ON ee 18 20 21 26 e For details on the function and operation of the various parts refer to the pages indicated in parentheses e Buttons indicated are DVD control buttons and can be operated when the remote control mode selector switch is set to the position e he functions of the system buttons are switched using the remote control mode selector switch 16 Names and functions of remote control unit buttons on the DHT M330DV e Buttons in sections D 3 can be operated regardless of the position of mode switches 1 and 2 e Consider as standard positions and switch as necessary to operate D Surround amplifier control buttons We RN ON Turns the AVR M330 s power on ECOL dion OFF Turns the AVR M330 s power off E EE FUNCTION Function selection in order 3 mm 43 SURROUND Surround mode selection INPUT MODE Input mode selection TEST TONE Test tone
50. elect the digital input function DVD or TV AUX1 or AUX2 1 digital input FUNCTION FUNCTION NOTES e Signals encoded in Dolby Digital can only be played in the Auto decode Dolby Digital Dolby Pro Logic II or Auto stereo Direct Main unit Remote control unit stereo or virtual modes Other modes do not work when playing Dolby Digital signals Set the input mode to AUTO e DTS signals can only be played in the Auto decode DTS Direct 2 DTS sources can also be played in the input mode DTS stereo or virtual modes Other modes do not work when playing DTS signals INPUT MODE Remote control unit 34 2 2 channel mode settings e n the AUTO DECODE mode it is possible to automatically conduct multi channel playback in the Dolby Digital or DTS surround mode or play in the stereo 2 channel mode AUTO STEREO mode factory default setting For 2 channel input signals one of four play modes can be set with the 2 channel mode setting Auto Stereo Dolby Pro Logic II Cinema Dolby Pro Logic II Music and Dolby Pro Logic II Game For analog and PCM sources it is also possible to select DTS NEO 6 Cinema and DTS NEO 6 Music x When the function is set to TAPE or TUNER the Auto Stereo 2 channel mode cannot be selected To play in stereo set the surround mode to STEREO page 29 Set the remote control selector switches Switch1 to DVD Switch2 to AMP TV VER Tl t m 1 TAPE
51. es delay time etc For details make the settings referring to page 39 o Q OFF on MULTIREC SLEEP NTSC PAL TITLE TIME C 9 eom Guin TVOPOW Pe ben ar CLEAR A B REPEAT SLIDE MODE ZOOM la RDS PTY CT RT PROG DIRECT REPEAT RANDOM CD SRS MODE MEMO sano C 1 Playing DVDs in the surround mode e Refer to pages 14 and check that all the connections are correct e Operate the remote control unit at the AMP position 1 Turn on the power 4 Play the DVD The display changes as shown below e The display lights depending on the type of disc e The mute mode is set for several seconds after the power Example When playing a pre recorded DU potey aise is turned on to prevent noise from being produced Be a ON STANDBY pn Re e Playback in the Dolby Digital Surround mode DIGITAL modis Remate contou Example When playing a pre recorded dts disc 2 Select the DVD input source FUNCTION FUNCTION e Playback in the DTS Surround mode Example When playing a pre recorded ER disc Main unit Remote control unit Set the surround mode to AUTO DECODE The display becomes as shown below e Auto stereo stereo playback SURROUND MODE SURR MODE Adjust the volume 5 e When the input mode is set to AUTO and the surround mode is set to AUTO DECODE depending on the signals of the disc being played Dolby Digital DTS o
52. face is facing upwards or downwards according to the place of installation We recommend setting it so that the front surface is facing downwards when installed at a position above the ears upwards when installed on the floor Use the included pedestal to adjust the angle of installation as shown on the diagram at the right HM When mounting the satellite speaker system SC AM330 on a stand or bracket M5 nuts are inserted into the bottom of the satellite speaker system SC AM330 at intervals of 60 mm When mounting following the instructions in the manual included with the speaker stand or ceiling mount bracket and be sure to install properly and securely e Store this instructions in a safe place After reading store this instructions along with the warranty in a safe place e Note that the illustrations in this instructions may differ from the actual set for explanation purposes For heat dispersal leave at least 10 cm 4 inch of space between the top back and sides of this unit and the wall or other components G x 10 cm 4 inch or more Wall Center speaker SC CM330 EAS 2 Example of installation Facing Im Center speaker SC CM330 Rear of front surround speaker Bottom of front surround SC AM330 speaker SC AM330 Wall mount hook Speaker STAND speaker bracket mount screw hole CAUTION e To ensure safety do not place any objects on top or lean objects a
53. g the release button insert the core wires making sure to match the cord s and polarities with the and sides of the plug gt CA EN a 4 Release the release button then gently pull on the cord to check t release button that it is firmly attached Protector circuit e The AV surround amplifier AVC M330 is equipped with a built in protection circuit The purpose of this circuit is to cut off the output to the speakers in order to protect them under circumstances such as when the output of the amplifier is inadvertently short circuited and a large current flows or when there is an extremely large output The protection circuit is also activated when the internal temperature is unusually high When the protection circuit is activated due to high internal temperature the volume indicator flashes and the speaker output Is restricted If the internal temperature rises further the power is set to the standby mode and the power indicator flashes red In such cases be sure to unplug the AV surround amplifier s power cord from the power outlet check the wiring of the connection cords and input cords for any abnormalities and if the AV surround amplifier s temperature is extremely high wait for it to cool down improve ventilation around the amplifier then turn the power back on If the protection circuit is activated even though there are no problems with the wiring or with ventilation around the AV surround am
54. gainst the speaker system e The speaker may topple down or fall if force is applied to the sides Be particularly careful to avoid this as this could cause injury or other serious accidents ENGLISH WARNING e When installing the speaker systems on the ceiling or wall to ensure safety have specialists do the installation work e Be sure to fasten the speaker cords to a wall etc to prevent people from tripping over them or otherwise pulling on them accidentally causing the speaker systems to fall e Be sure to check for safety after installing the speaker systems Afterwards perform safety inspections at regular intervals to be sure there is no danger that the speaker systems will fall Denon will accept no responsibility for damages or accidents caused by inappropriate choice of the place of installation or improper installation procedures 3 CAUTIONS ON HANDLING 1 AV SURROUND RECEIVER AVR M330 Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks If this happens either turn down the MASTER VOLUME control or connect components to the input jacks Muting of PRE OUT jacks HEADPHONE jack and SPEAKER terminals The PRE OUT jacks HEADPHONE jacks and SPEAKER terminals include a muting circuit Because of this the output signals are greatly reduced tor several seconds after the power switch is turne
55. ic sources As this product is provided with an immense array of features we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding We greatly appreciate your purchase of this unit M To be sure you take maximum advantage of all the features this unit has to offer read these instructions carefully and use the set properly Be sure to keep this manual for future reference should any questions or problems arise SERIAL NO PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE TABLE OF CONTENTS 1 BEFORE Ener 5 11 LISTENING TO THE RADIO 42 46 2 CAUTIONS ON INSTALLATION nn ana 5 6 12 EXPANDING TO A 6 1 OR 7 1 CHANNEL STEMM 47 48 3 CAUTIONS ON HANDLING u nu ee 6 13 DOLBY 7 DTS SURROUND er 49 52 A FEATURE ee ee at 6 14 USING THE SLEEP TIMER zu eu an eee tibns 53 9 CONNECTION EEN 7 14 15 SYSTEM FUNCTIONS a een 54 6 PART NAMES AND FUNCTIONS nennen 15 18 1G LAST FUNCTION MEMORY E 55 7 REMOTE CONTROL UNIT ettet tut tbe an 19 26 17 INITIALIZATION OF THE MlChRObpOCEeGOp e 55 8 SETTING UP THE SYSTEM nenn 27 28 18 TROUBLESHOOTING a aaa ah 56 9 OPERATING THE SURROUND FUNCTIONS 29 32 19 SPECIFICATIONS nennen 57 10 SURROUND PLEAYBACR une 33 41 BH ACCESSORIES Check that the following parts are included in a
56. ical or coaxial digital output Set the input mode to AUTO satellite broadcasts CATV etc same as for PCM Page 30 X1 Please use a commercially available adapter when connecting the Dolby Digital RF output jack of the LD player to the digital input jack Please refer to the instruction manual of the adapter when making connection X2 Some DVD digital outputs have the function of switching the Dolby Digital signal output method between bit stream and convert to PCM When playing in Dolby Digital surround on the AVR M330 switch the DVD player s output mode to bit stream In some cases players are equipped with both bit stream PCM and PCM only digital outputs In this case connect the bit stream PCM jacks to the AVR M330 2 Dolby Pro Logic IIx e Dolby Pro Logic IIx furthers the matrix decoding technology of Dolby Pro Logic II to decode audio signals recorded on two channels into up to 7 1 playback channels including the surround back channel Dolby Pro Logic IIx also allows 5 1 channel sources to be played in up to 7 1 channels The mode can be selected according to the source The Music mode is best suited for playing music the Cinema mode for playing movies and the Game mode for playing games The Game mode can only be used with 2 channel audio sources 3 Dolby Pro Logic II e Dolby Pro Logic II is a new multi channel playback format developed by Dolby Laboratories using feedback logic steering technology and
57. il auquel se r f re cette d claration est conforme aux standards suivants EN60065 EN55013 EN55020 EN61000 3 2 et EN61000 3 3 D apr s les dispositions de la Directive 73 23 EEC 89 336 EEC et 93 68 EEC DICHIARAZIONE DI CONFORMIT Dichiariamo con piena responsabilit che questo prodotto al quale la nostra dichiarazione si riferisce conforme alle seguenti normative EN60065 EN55013 EN55020 EN61000 3 2 e EN61000 3 3 In conformit con le condizioni delle direttive 73 23 EEC 89 336 EEC e 93 68 EEC QUESTO PRODOTTO E CONFORME AL D M 28 08 95 N 548 e DECLARACI N DE CONFORMIDAD Declaramos bajo nuestra exclusiva responsabilidad que este producto al que hace referencia esta declaraci n est conforme con los siguientes est ndares EN60065 EN55013 EN55020 EN61000 3 2 y EN61000 3 3 Siguiendo las provisiones de las Directivas 73 23 EEC 89 336 EEC y 93 68 EEC e EENVORMIGHEIDSVERKLARING Wij verklaren uitsluitend op onze verantwoordelijkheid dat dit produkt waarop deze verklaring betrekking heeft in overeenstemming is met de volgende normen EN60065 EN55013 EN55020 EN61000 3 2 en EN61000 3 3 Volgens de bepalingen van de Richtlijnen 73 23 EEC 89 336 EEC en 93 68 EEC e VERENSST MMELSESINTYG H rmed intygas helt p eget ansvar att denna produkt vilken detta intyg avser uppfyller f ljande standarder EN60065 EN55013 EN55020 EN61000 3 2 och EN61000 3 3 Enligt stadgarna i direktiv 73 23 EEC 89
58. ing Og PLIIx is also displayed and the signals are played in 6 1 or 7 1 channels e For DIS Neo 6 decoding Neo 6 is displayed e For playback sources and surround modes see Table of Surround Mode Parameters on pages 40 and 41 The playing mode for the different sources can be selected using the surround parameters See below e Dolby Digital EX For 6 1 channels Dolby Digital EX Dolby Digital PLL IIx Music For 7 1 channels Dolby Digital EX Dolby Digital PLL IIx Cinema Dolby Digital PLIIx Music e DTS For 6 1 7 1 channels DTS surround DTS NEO 6 e DTS ES For 6 1 7 1 channels none fixed to DTS discrete or DTS ES matrix depending on plug Analog digital PCM Dolby Digital AAC 2 channel sources For 6 1 7 1 channels Auto stereo PLIIx Cinema PLIIx Music PLIIx Game For analog and PCM 2 channel sources DTS NEO 6 Cinema and DTS NEO 6 Music can also be used 48 13 DOLBY DTS SURROUND The AVR M330 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater Dolby Surround 1 Dolby Digital Dolby Digital is the multi channel digital signal format developed by Dolby Laboratories Dolby Digital consists of up to 5 1 channels front left front right center surround left surround right and an additional channel exclusively reserved for additional deep bass sound effects the Low Frequency Effects LFE ch
59. ing the listener from 360 degrees Though maximum performance is achieved when sound tracks recorded with this system are played using a DTS ES decoder when played with a conventional DTS decoder the SB channel signals are automatically down mixed to the SL and SR channels so none of the signal components are lost B DTS ES Matrix 6 1 With this format the additional SB channel signals undergo matrix encoding and are input to the SL and SR channels beforehand Upon playback they are decoded to the SL SR and SB channels The performance of the encoder used at the time of recording can be fully matched using a high precision digital matrix decoder developed by DTS thereby achieving surround sound more faithful to the producer s sound design aims than with conventional 5 1 or 6 1 channel systems In addition the bit stream format is 10096 compatible with conventional DTS signals so the effect of the Matrix 6 1 format can be achieved even with 5 1 channel signal sources Of course it is also possible to play DTS ES Matrix 6 1 encoded sources with a DTS 5 1 channel decoder When DTS ES Discrete 6 1 or Matrix 6 1 encoded sources are decoded with a DTS ES decoder the format is automatically detected upon decoding and the optimum playing mode is selected However some Matrix 6 1 sources may be detected as having a 5 1 channel format so the DTS ES Matrix 6 1 mode must be set manually to play these sources For instructions on selecting the surround mod
60. ions will not work properly if the input output function settings are not right for the connected components Be sure to set the input output functions for the components being used See page 28 The setting contents are maintained until they are next changed even when the power is switched off 1 Auto power on function e When the play button on the DVD unit or the DVD play button on the remote control unit is pressed while the power is in the standby mode the DVD M330 and AVR M330 s power turns on automatically and if a disc is loaded in the DVD M330 the disc is played AVR M330 a he ee When the DVD M330 and AVR M330 are in the standby 1 mode the power can be turned on simply by pressing the play button on the DVD unit or the DVD play button on the remote control unit If a disc is loaded playback starts gt z l DVD M330 1 DVD M330 Remote control unit e To listen to a radio program simply press TUNER one of the tuner preset buttons or on the remote control unit The power turns on and a station is tuned in e Remote control unit 2 Auto function selection e At the touch of a button the function switches automatically to Press the play button on the DVD M330 or the DVD play DVD and disc playback begins 1 button on the remote control unit e The AVR M330 s gt function switches to DVD M330 1 DVD and if a disc is l
61. ith a new battery as soon as possible e When inserting the batteries be sure to do so in the proper direction following the o and marks in the battery compartment 2 Set three R6P AA batteries in the battery compartment in the e To prevent damage or leakage of battery fluid indicated direction e Do not use a new battery together with an old one e Do not use two different types of batteries e Do not short circuit disassemble heat or dispose of batteries in flames e Remove the batteries from the remote control unit when you do not plan to use it for an extended period of time e f the battery fluid should leak carefully wipe the fluid off the inside of the battery compartment and insert new batteries e When replacing the batteries have the new batteries ready and insert them as quickly as possible 3 Put the rear cover back on 2 Using the remote control unit e Point the remote control unit at the remote sensor on the main unit as shown on the diagram e The remote control unit can be used from a straight distance of approximately 7 meters 22 feet from the main unit but this distance will be shorter if there are obstacles in the way or if the remote control unit is not pointed directly at the remote sensor e The remote control unit can be operated at a horizontal angle of up to 30 degrees with respect to the remote sensor NOTES e t may be difficult to operate the remote control unit if the re
62. lby surround recording signals D 2 channel PCM stereo signals 2 2 channel Dolby Digital signals When either of these signals is input to the AVR M330 the surround mode is automatically set to Dolby Pro Logic II when the AUTO DECODE mode is selected EM Sources recorded in Dolby Surround are indicated with the logo mark shown below Dolby Surround support mark I pecev surrounp Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of Dolby Laboratories DTS Digital Surround Digital Theater Surround also called simply DTS is a multi channel digital signal format developed by Digital Theater Systems DTS offers the same 5 1 playback channels as Dolby Digital front left front right and center surround left and surround right as well as the stereo 2 channel mode The signals for the different channels are fully independent eliminating the risk of deterioration of sound quality due to interference between signals crosstalk etc DTS features a relatively higher bit rate as compared to Dolby Digital 1234 kbps for CDs and LDs 1536 kbps for DVDs so it operates with a relatively low compression rate Because of this the amount of data is great and when DTS playback is used in movie theaters a separate CD ROM synchronized with the film is played With LDs and DVDs there is of course no need for an extra disc the pictures and sound can be recorded simultaneously
63. le sources e Digital inputs DVD TV AUX1 and AUX2 functions Dolby Digital multi channel sources DTS sources 1 Dolby Digital and DTS surround playback digital inputs only 3 Set the surround mode to AUTO DECODE SURROUND MODE SURR MODE AUTO DECODE or Main unit Remote control unit x If the mode is set to anything other than AUTO DECODE the AUTO DECODE mode can be set using the AUTO DECODE button on the remote control unit ITAL 4 Play a program source containing the Dies or PPA mark e The Dolby Digital indicator lights when DO DIGITAL Lit playing a Dolby Digital source e The DTS indicator lights when playing a DTS Lit Set the remote control selector i DTS source switches x The mode is selected automatically according to the Switch1 to DVD format of the source being played Switch2 to AMP omi i Display the surround parameters for the source cD CD x Nothing is displayed if there are no parameters that can be ae 1 adjusted SURROUND PARAMETER Remote control unit Select the various surround parameters and set them x The display returns to normal if no operation is performed tor 4 seconds while the parameters are displayed gt oO m P N NL N Remote control unit x Stop operating buttons once the surround parameter settings have been completed After several seconds the normal display reappears and the settings are automatically set S
64. mensia 044 Metz 160 161 162 163 164 Dixi 007 016 027 MGA 001 039 048 056 057 058 065 081 083 Electroband 046 Midland 125 Electrohome 029 056 057 058 147 Minutz 066 Elta 027 Mitsubishi 001 016 039 048 056 057 058 065 081 082 Emerson 029 051 059 060 061 062 118 123 124 139 148 083 105 Envision 038 Montgomery Ward 011 020 144 145 146 Etron 027 Motorola 121 147 Fisher 014 021 063 064 065 118 MTC 031 034 039 048 095 Formenti 155 NAD 008 075 076 128 Fortress 012 National 002 036 061 147 22 TV National Quenties 002 Nikko 054 Optimus 128 Orion 004 139 Philco 005 010 030 050 051 056 079 085 127 131 132 145 147 Pioneer 124 128 142 Price Club 095 Proton 035 051 092 129 Quasar 036 037 074 141 RCA 040 044 125 130 137 151 152 Saisho 027 Sansui 139 SBR 015 Scott 062 Sharp 011 012 013 026 093 099 100 104 121 Signature Sony Spectricon Supre Macy Sylvania Tandy Technics Tera Universal Video Concepts Wards Zonda 045 144 043 046 138 146 150 007 033 032 122 005 010 017 030 078 079 085 089 101 127 131 132 145 155 012 121 037 035 129 020 066 088 016 005 045 066 078 085 088 089 093 102 103 131 132 148 007 23 ENGLISH VCR Admiral 081 JVC 004 005 006 026 029 043 044 0
65. mote sensor is exposed to direct sunlight or strong artificial light e Do not press buttons on the main unit and remote control unit simultaneously Doing so may result in malfunction e Neon signs or other devices emitting pulse type noise nearby may result in malfunction so keep the set as far away from such devices as possible 19 ENGLISH e The included remote control unit RC 996 can be used to operate not only the DHT M330DV but also and to operate other remote 3 1 MD recorder system buttons control compatible DENON products In addition the remote control operation codes of other major brands of TVs and video decks are also stored in the remote control unit so the unit can be operated with mode switch 2 set to MD used to operate these TVs and video decks as well Q p uu roomer 58 Ge 3 Operating DENON audio components 2 e Turn on the power of all the components before operating them e e Depending on the model and year of make of your component some of the keys may not work pe OR ICO CD Ges 1 E 1 Cam Qn Coe C 1 3 0 Of D DG D VI L cH OG DS 1 24 IER 2 TM myl TIME Disc time display TITLE Name display MULTI REC Recording EDIT Edit mode selection CHARAC Selection of characters when inputting names uM m ENTER Entering of edited values C a 7 O CD SRS CD synchronized recording CLEAR Program clearing 29 RANDOM Random play on off CH SEL
66. mpatible discs 2 Auto stereo DOLBY PLII cinema PLII music and PLII game selectable DTS NEO 6 cinema and NEO 6 music also selectable for PCM sources other than those with sampling frequencies of 96 kHz 3 DOLBY PLII cinema PLII music PLII game DTS NEO 6 cinema and NEO 6 music selectable 4 Cinema DOLBY PLII cinema and music PLII music selectable 5 DH1 DH2 DH3 and BYPASS selectable 6 Reference and Wide selectable 7 MAIN main audio SUB sub audio and MAIN SUB selectable 41 ENGLISH 11 LISTENING TO THE RADIO 1 Tuning Example Tuning in FM AM stations 1 Select the FUNCTION TUNER FUNCTION FUNCTION Main unit Remote control unit Select FM or AM 2 e he selected FM AUTO FM MONO or AM is displayed e When using the remote control the mode button is used to select FM AUTO and MONO MENU SET 4 SELECT RANDOM PROG DIRECT BAND We Ne TUNING Main unit Remote control unit Adjust the receiving frequency e When a station is received the TUNED indication will light TVVOL 4 SELECT gt N TUNING A Main unit Remote control unit 42 Set the remote GA 2 5 Co e ED control selector a 2 switches Switch1 to DVD GE Switch2 to TUNER 2 u e e nn GE D Qaa Ca C C gt NOTE A humming sound may be heard when using a TV nearby while
67. mponent whose signals are to be stored in the preset memory refer to the tables of remote control codes on pages 22 to 25 o OFF DN E 3 c 4 m JI m CH 3 MULTI REC 4 ca 4 TIME DVD TUNER TV AUXI gest gt 00 77D 7 TUNER TT NAP wun 4 2 e TAPE AUX2 OOO vom 0 6 moi w n nue NTSC PAL o o 5 M CH STEREOAUTO DECODE a OWS Qu 9 o 9 NOTES og OT e When buttons are pressed while setting the preset memory O O their signals are sent from the remote control transmitter so ob 3 cover the remote control sensor when setting the preset Si memory to prevent accidental operation O e Depending on the model and year of make some of the remote control a codes for the brands included on the tables may not operate properly e For some brands there are multiple types of remote control codes If lt 4 TAPE m DENON RC 996 an operation does not work try changing to one of the other codes E Not set upon shipment from the factory 1 Set mode switch 1 to the DVD position DVD CD a MD 2 Set mode switch 2 to the TV VCR position TV VCR 0v0 411 CIID m f TAPE Am mh Press the power ON button and the OFF button simultaneously e The transmission LED indicator flashes OFF UN 21 ENGLISH Combinations of preset codes for different brands TV Admiral 045 121 Fujitsu 004 062 Adventura 122 Funai 004 062 Aiko 054 Futuretech
68. n de energ a cuando no utilice el equipo por mucho tiempo Neem altijd het netsnoer uit het stopkontakt wanneer het apparaat gedurende een lange periode niet wordt gebruikt e Koppla ur n tkabeln om apparaten inte kommer att anv ndas i l ng tid Do not let foreign objects in the set e Keine fremden Gegenst nde in das Ger t kommen lassen e Ne pas laisser des objets trangers dans l appareil e E importante che nessun oggetto inserito all interno dell unit No deje objetos extranos dentro del equipo e Laat geen vreemde voorwerpen in dit apparaat vallen e Se till att fr mmande f rem l inte tr nger in i apparaten Do not let insecticides benzene and thinner come in contact with the set e Lassen Sie das Gerat nicht mit Insektiziden Benzin oder Verd nnungsmitteln in Ber hrung kommen e Ne pas mettre en contact des insecticides du benz ne et un diluant avec l appareil e Assicuratevvi che l unit non venga in contatto con insetticidi benzolo o solventi e No permita el contacto de insecticidas gasolina y diluyentes con el equipo e Laat geen insektenverdelgende middelen benzine of verfverdunner met dit apparaat in kontakt komen e Se till att inte insektsmedel pa spraybruk bensen och thinner kommer i kontakt med apparatens h lje e For sets with ventilation holes Do not obstruct the ventilation holes e Die Bel ftungs ffnungen d rfen nicht verdeckt werden
69. nels L to L white and R to R red properly as shown on the diagram e Insert the plugs securely Incomplete connections may result in noise e Be sure to connect the speaker cords between the speaker terminals and the speaker systems with the same polarities to to If the polarities are switched the sound at the center will be weak the position of the different instruments will be unclear and the stereo effect will be lost e After unplugging the power cord wait about 5 seconds before plugging it back in e Note that setting the connection cords pin plug cords next to the power cords may result in humming or other noise CAUTION e Only one DVD player can be connected to the AVR M330 using system connections System operations cannot be performed properly if two DVD player are connected using system connections e Whenever the power operation switch is in the STANDBY position the unit is still connected to AC line voltage e Please be sure to unplug the power cord when you leave home for e g a vacation etc System operations Such system operations as the auto power on functions as well as remote control operations cannot be performed unless all the RCA pin plug cords and system connector cords are connected between the units so be sure to make all the connections properly as shown in the diagram Also disconnecting Connecting the speaker systems Connect the speaker system for the left channel the lef
70. ns Operated with mode switch 2 set to DVD NTSC PAL NTSC PAL selection ZOOM Zoom on off SLIDE MODE JPEG image slide mode em Ss Sey selection A B REPEAT A B repeat playback setting CLEAR Program clear SEARCH MODE Title and chapter search selection RANDOM Random play on off REPEAT Repeat play setting PROG DIRECT Program direct play E 2 z g 8 x E 8 selection CALL Program call 0 9 10 Number buttons DVD SETUP DVD setup mode on off A Tak Cursor up down left right ENTER Enter setting TOP MENU Top menu call MENU Menu call DISPLAY Display call selection RETURN Menu return SUBTITLE Subtitle language selection AUDIO Audio language selection ANGLE Angle selection RDS PTY CT RT 3 Tuner system buttons Operated with mode switch 2 set to TUNER ro ns ra ak PROG DIRECT Gum RANDOM 1 Gen Gas j Ma 91 Ke d zi a amp 5 E j 4 S 3 4 S A 8 8 S S gt DIRECT TEST TONE a u gt ANGLE AUDIO SUBTITLE lt 4 TAPE m DENON RC 996 BAND FM AM band selection MEMO Preset memory MODE FM auto mono mode selection TUNER Tuning up down 0 9 10 Preset channel number buttons Use this button to automatically tune to stations using the radio data system RDS PTY gt TP _ OFF poU ed Frequency Press this button after selecting PTY with the RDS button
71. nt of MEMO 382 DENON Ltd TOKYO JAPAN www denon com Printed in China OOD 511 4267 006
72. o DVD TV AUX1 AUX2 e Different input modes can be selected for each input function The selected input mode is stored in the memory for the individual input functions e When the input function is set to something other than the above ANALOG ONLY is displayed and the input mode cannot be selected D AUTO auto mode In this mode the type of signal being input to the digital and analog input terminals is detected and the program in the set s surround decoder is switched automatically to play the signals for the selected input function The presence or absence of digital signals is detected the signals input to the digital input are identified and decoding and playback are performed automatically in DTS Dolby Digital or PCM 2 channel stereo format If no digital signal DVD is being input the analog input jacks are selected Use this mode to play Dolby Digital signals 2 PCM exclusive PCM signal playback mode Decoding and playback are only performed when PCM signals are being input 3 DTS exclusive DTS signal playback mode Decoding and playback are only performed when DTS signals are being input 4 ANALOG exclusive analog audio signal playback mode The signals input to the analog input jacks are played This cannot be selected in the TV AUX1 AUX2 mode X The input mode automatically switches to AUTO if you switch the input function to DVD from anything other than DVD Press the SURROUND button t
73. o select the surround mode SURROUND MODE SURR MODE Main unit Remote control unit e The function switches as shown below AUTO DECODE gt 5CH STEREO HALL DOLBY VS STEREO DIRECT AUTO DECODE Start playback on the selected component e For operating instructions refer to the component s manual Either turn the MASTER VOLUME dial on the main unit or 5 use the VOLUME buttons on the remote control unit to adjust the volume The volume level is displayed on the display MASTER VOLUME Main unit Remote control unit e he volume can be adjusted within the range O to 60 Note that depending on the input signal surround mode speaker settings and channel level setting it may not be possible to adjust the volume up to 60 Bi To check the currently playing program source etc Press the MENU SET button Display STATUS then press the select lt 4 and control MENU SET 4 SELECT gt e i 7 TUNING d Main unit Main unit The current program source and surround settings are shown on the display each time the button is pressed or turned Input mode display e n the AUTO mode ar en Ge Q iDIG ANA e In the DIGITAL PCM mode B J N L1 N a DIG PCM mn ques 7 qx e n the DIGITAL DTS mode N a DIG DTS e In the ANALOG mode aum N 4 ANA a N Input signal display e DOLBY DIGITAL Ww l 7 DIG DO DIGITAL e DIS l al DIG DTS e PCM K PA e DIG
74. oaded playback of DV the disc starts DVD M330 Remote control unit e To listen to a radio program simply press one TUNER of the tuner preset buttons or on the remote control unit e Auto function selection does not work for components connected using the TV AUX1or AUX2 input terminals Remote control unit 54 LAST FUNCTION MEMORY e This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the power is switched off This function eliminates the need to perform complicated resettings when the power is switched on e The unit is also equipped with a back up memory This function provides memory storage when the power switch is off and with the power cord disconnected INITIALIZATION OF THE MICROPROCESSOR When the indication of the display is not normal or when the operation of the unit does not shows the reasonable result the initialization of the microprocessor is required by the following procedure 1 Press the power button to set the standby mode then unplug the sets ON STANDBY power cord from the wall power outlet After at least 10 seconds press the SURROUND MODE 2 button on the AVR M330 press the SDB PEO equalizer button then press the surround mode button again for at least 2 seconds After several seconds INITIALIZE appears on the display and the power turn
75. off the audio output temporarily 1 Press the MUTING button X Cancelling MUTING mode Press the MUTING button again MUTING Remote control unit NOTES e The mute mode is cancelled when the main unit s main volume control or one of the main volume control buttons on the remote control unit is operated e The setting is cancelled if the set s power is turned off SURROUND PLAYBACK 1 Before playing with the surround function e Adjustments using the test tones can only be performed in the e Even after adjusting using the test tones the various channels can Auto mode and are only valid for the AUTO DECODE Surround be adjusted using the procedure described below to suit the modes The adjusted levels are automatically stored in the memory program source and your preferences eeeo TESTTONE INPUTMODE SURR MODE FUNCTION 1 4 0 0 0 D dg t m I TAPE VERCH ER gt gt L a gt gt D gt EM HI DENON RC 996 1 Press the TEST TONE button Press the CH SELECT button on the remote control unit 1 e The following is displayed TEST TONE T a T man qa m TRE CH SELECT Remote control unit Remote control unit 2 Test tones are output from the different speakers 2 Use the select lt button while the above is displayed to Either turn the MASTER VOLUME dial on the main unit or select LEVEL use the VOLUME buttons on the remote control unit to e The level display sho
76. on the same disc so the discs can be handled in the same way as discs with other formats There are also music CDs recorded in DTS These CDs include 5 1 channel surround signals compared to two channels on current CDs They do not include picture data but they offer surround playback on CD players that are equipped with digital outputs PCM type digital output required DTS surround track playback offers the same intricate grand sound as in a movie theater right in your own listening room E DTS compatible media and playback methods DIGITAL SURROUND The following are general examples Also refer to the player s operating instructions Marks indicating DTS compatibility Media Dolby Digital output jacks Playback method reference page Optical or coaxial digital output Set the input mode to AUTO or DTS page 30 same as for PCM X2 Never set the mode to ANALOG or PCM X1 LD VDP Optical or coaxial digital output Set the input mode to AUTO or DTS page 30 same as for PCM X2 Never set the mode to ANALOG or PCM X1 DVD sprical EE Set the input mode to AUTO or DTS page 30 same as for PCM x3 1 DTS signals are recorded in the same way on CDs and LDs as PCM signals Because of this the un decoded DTS signals are output as random hissy noise from the CD or LD player s analog outputs If this noise is played with the amplifier set at a very high volume it may
77. ord AV SURROUND RECEIVER TV AVR M330 Connecting the VIDEO Jack DVD M330 e Connect the TV s video input jack VIDEO INPUT to the DVD s VIDEO OUT jack using a 75 ohms video cord 10 3 Connecting the Audio Signals of a Digital Satellite Tuner and VCR e Connect the video signals directly to the TV and switch the picture on the TV e When making connections also refer to the operating instructions of the other components Digital satellite cable tuner Connection of a digital satellite cable tuner e For tuners equipped with an optical digital output terminal connect the digital output terminal to the DIGITAL TV AUX1 IN terminal on the AVR M330 using an optical transmission cable e To connect the audio output terminals use whatever of the AVR M330 s TAPE terminals are open Connection to the optical digital input terminal e Only audio signals are input to the optical digital input terminal e Use a commercially available optical transmission cable for connection to the optical transmission terminal OPTICAL GE OUT m AV SURROUND RECEIVER AVR M330 FM COAX 75Q DIGTAL IN OPT Connection of a video deck e Connect the video decke audio output and audio input terminals to whatever of the AVR M330 s TAPE terminals are open using pin plug cords Video deck 11 ENGLISH 4
78. ow at night for example set this to the ONT to lower the peak of the sound and amplify the quieter sounds narrowing the dynamic range and making the sound easier to listen to e With DTS source only displayed for sources compatible with dynamic range compression PEQ1 3 e Preset Equalizer is turned on e Three types of bass treble balances and surround channel delay settings are preset Select them as desired X f no operation is performed within 4 seconds the display switches back to what was previously displayed 2 Adjustment the Sound Enhancer The SOUND ENHANCER function will not work in the direct mode wm EL gt gt I lt gt gt i D gt TAPE m Press the SOUND ENHANCER button 1 e The tone switches as follows each time the SOUND ENHANCER button is U pressed ENHAN Remote control unit 7 ENHANCER OFF gt VOCAL ENH SURR ENH ENHANCER OFF e The SOUND ENHANCER setting Is turned off VOCAL ENH e The VOCAL ENHANCER is turned on e The center channel is emphasized and DRC is turned on e When listening quietly at night the vocals are easier to hear SURR ENH e The SURROUND ENHANCER is turned on e The surround channel is emphasized for a stronger sense of presence x When SURROUND ENHANCER is turned on SDB P EQ is defeated When SDB PEO is turned on SURROUND ENHANCER is set to ENHANCER OFF 3 Turning the sound off temporarily MUTING O O O Jg Use this to turn
79. plifier there may be a problem with the AV surround amplifier Unplug the AV surround amplifier s power cord from the power outlet then contact a DENON service or repair center Note on speaker impedance e The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance for example speakers with an impedance of lower than 4 ohms are connected If the protector circuit is activated the speaker output is cut off Turn off the set s power wait for the set to cool down improve the ventilation around the set then turn the power back on ENGLISH 2 Connecting the DVD Player and TV e Connect the DVD player s video signals directly to the TV and switch the picture on the TV e When making connections also refer to the operating instructions of the other components Connecting the AUDIO Jack Connecting the DIGITAL Jack e Connect the video disc player s analog audio output jacks e Use a commercially available optical transmission cable for ANALOG AUDIO OUT to the DVD IN jacks using pin plug connection to the optical transmission terminal OPTICAL cords SYSTEM DIGITALOUT AUDIO OUT VIDEO OUT DVD VIDEO PLAYER CONNECTOR IPCM BITSTREAM DVD M330 nun me SCART cord System Cord Video cord SYSTEM CONNECTOR es S Video c
80. r PCM is selected and the signals are automatically decoded and Main unit Remote control unit played in the Dolby Digital DTS or auto stereo mode e For details on the surround modes and the surround parameters see 110 SURROUND PLAYBACK pages 33 to 39 MASTER VOLUME gt 3 X f no signal is being input Main unit Remote control unit JI The volume is indicated on the main volume level display 29 ENGLISH 2 Input mode setting 5 3 1 Press the FUNCTION button to select the input function to be played FUNCTION FUNCTION Main unit Remote control unit e The function switches as shown below e The function only changes in the direction when operated from the remote control unit e Factory default TAPE TAPE DVD gt TUNER gt TAPE gt TV AUX1 gt AUX2 When DVD TV AUX1 AUX2 was selected as the input 2 function press the remote control unit s INPUT MODE button to select the input mode e Consider AUTO as standard position INPUT MODE Remote control unit pee PCM gt DTS gt ANALOG D e ANALOG cannot be selected when TV AUX1 or AUX2 was selected as the input function e ANALOG can be selected when TAPE is set to TV AUX1 at FUNCTION SETUP under QUICK SETUP in the detailed settings 30 Input mode selection function e The input mode can be selected when the input function is set t
81. range high fidelity surround sound from sources such as laser disc DVD and specially encoded music discs The AVR M330 can be also decoded with DTS Neo 6 a surround mode allowing 5 1 channels playback of regular stereo sources DOLBY PRO LOGIC II Game mode compatibility In addition to the previously offered Music and Cinema modes the AVR M330 also offers a Game mode optimum for games Dolby Virtual Speaker compatibility Dolby Virtual Speaker is an proprietary technology of Dolby Laboratories A high performance digital signal processor enables playback of Dolby Digital and DTS multi channel surround signals in the Dolby Virtual Speaker mode Surround sound can be achieved with the Dolby Virtual Speaker mode for CDs and other 2 channel sources in combination with the Dolby Pro Logic II decoder Remote control unit with preset memory function The AVR M330 comes with a remote control unit equipped with a preset memory function including the remote control operation codes for DVD M330 DVD player MD recorders cassette decks and DENON remote control compatible components as well as the remote control operation codes of other major brands of TVs and video decks Convenient system functions When system connections are made with a DVD M330 DVD player such system functions as auto function selection synchronized recording can be performed easily Equipped with 6 1 and 7 1 channel playback expansion function surround b
82. receiving AM programs If this happens move the system as far from the TV as possible Auto tuning e When one of the Tuning button is pressed the frequency changes in steps of 50 kHz in the FM band 9 kHz in the AM band e f one of the Tuning button is held for over 1 second the frequency continues to change when the button is released auto tuning and stops when a station is tuned in Tuning will not stop at stations whose reception is poor e To stop the auto tuning function press the Tuning button once FM Stereo Reception e When a program being broadcast in FM AUTO is received the ST indicator lights and the program is received in stereo e f reception is poor and there is much noise in the stereo signals press the BAND or MODE button to set the FM MONO mode 2 Presetting stations remote control unit only WA total of 40 stations including both FM and AM stations can be preset E Preset stations using the including remote control unit Set the remote Use the and preset buttons to select the preset control selector number then press the MEMO button again to store that switches station at the selected number The number can also be specified directly using the 10 and O to 9 buttons on the Switch1 to DVD e numeric keypad Switch2 to TUNER TUNER must ue AND CD Cm mme T 1 Tune in the station you want to preset Remote control unit REPEAT
83. rious surround parameters X f nothing is done for 6 seconds from when the parameter is displayed the normal display reappears 4 SELECT gt la gt D A VN UN TUNING Main unit Remote control unit e Dolby H mode setting TESTTONE INPUTMODE SURR MODE FUNCTION Set the remote 000 0 control selector switches Switch1 to DVD Switch2 to AMP TV VER Til e 2 channel mode setting X To play with normal two channel stereo select the STEREO or DIRECT mode using the surround mode switch When using headphones the mode switches as follows each time the surround mode button is pressed 1 Connect headphones sold separately to the headphones jack e When headphones are plugged in the output to the speakers is automatically turned off and no sound is produced from the speakers Surround parameters 3 DOLBY H Dolby Headphone modes KI NEE Reference room PHONES small room with little reverberation DH2 ee Live room room with more reverberation than DH1 E Large room Press the surround parameter button and display the Larger room than DH1 Use this mode to achieve a 2 surround parameters sense of distance and diffusion of the sound 38 BYPASS asses Stereo playback 2 channel modes These can be selected when playing 2 channel sources analog MEI SURROUND PCM etc The signals are processed by one of the following decoders to achieve multipl
84. rly when using indoor antennas or 300 ohms feeder wires We recommend using outdoor antennas and 75 Q ohms coaxial cables 2 SPEAKER SYSTEM SYS M330 When installing carefully examine the place and method of installation for safety When using a stand brackets etc follow the instructions included with the stand or brackets and check for safety before installing and using Denon will accept no responsibility for damages or accidents caused by the unit falling The quality of the sound produced from the speaker system is affected by the size and type Japanese or Western of the room as well as by the method of installation Consider the points listed below before installing the speaker system Bl Note that placing the speaker system on the same stand or shelf as a record player may result in howling Bl there is a wall glass door etc directly in front of or behind the speaker system cover the wall or door with a thick curtain to prevent resonance and reflection M The SYS M330 speaker systems are of the low leakage flux type and can be used near televisions but depending on the TV there may be color blotching on the picture If this happens turn off the TV s power wait 15 to 30 minutes then turn the TV s power back on The TV s automatic degaussing circuit should reduce the blotching on the picture If blotching persists move the speaker further away M Set the center speaker SC CM330 so that its front sur
85. s been activated Unplug the power cord wait for the unit to 9 Monitor doesn t display an image The program cannot be copied from DVD to the VCR due to abnormally high temperature inside the unit Connections between the video output jack of this unit and the input connector of the monitor are incomplete The input setting of the monitor TV is different Almost all movie software contains a copy prevention signal cool off improve ventilation around the unit then turn the power back on Check whether the connections are correct Set the input switching of the TV to the jack to which the video input is connected A copy cannot be made The subwoofer does not produce sound Common problems when listening to the discs tapes and FM broadcasts etc Connections are incomplete Check the connections d 2 wv E 9 This unit does not operate properly when o remote control unit is used o E o cc Continuous noise is heard when receiving FM programs e Hissing or continuous noise is heard when receiving AM programs Batteries dead Remote control unit too far from this unit Obstacle between this unit and remote control unit Different button is being pressed and ends of battery inserted in reverse The mode selection of the remote control is not properly selected The DVD mode AV mode or audio mode is not properly selected Antenna cable is not properly conn
86. s on e The microprocessor is initialized NOTES e f step 3 does not work start over from step 1 e f the microprocessor is reset all the buttons and the setup settings are reset to the factory default values 29 ENGLISH TROUBLESHOOTING Check again before assuming the player is malfunctioning E Are all the connections correct d E Are you following the instructions in the manual E Are the speakers and other components operating properly If this unit does not seem to be functioning properly check the table below If this does not solve the problem this unit may be damaged Turn off the power unplug the power cord from the power outlet and contact your store of purchase or nearest Denon sales office Symptom Cause Measures Page DISPLAY not lit and sound not produced Power cord not plugged in securely Check the insertion of the power cord plug 14 when power switch set to on DISPLAY lit but sound not produced e Speaker cords not securely connected Connect securely e Improper position of the audio function Set to a suitable position 7 button 30 e Volume control set to minimum Turn volume up to suitable level e MUTING is on Switch off MUTING 29 Digital signals not input Digital input Input digital signals or select input jacks to 32 selected which digital signals are being input 30 Volume indicator on display flashing e The protection circuit ha
87. ss the TUNING UP or DOWN TV VOL RANDOM button TP search begins Remote control unit Ce 2 Press the RDS button until TP D pene eege appears on the display BUS 4 The station name is displayed on the display after searching stops Remote control unit e f no TP station is found when all the frequencies are searched NO PROGRAMME is displayed 9 RT Radio Text RT appears on the display when radio text data is received e When the RT mode is turned on while an RDS radio station not f E EL He do We i EDIT offering an RT service is tuned in NO TEXT is displayed on the EE I SL MSIE Comte DRE un ZuuM display then the mode automatically switches to the PS mode tne TED MOOIGSLOF IS Mt e n the same way the mode automatically switches to the PS mode when the RT service is finished In this case the mode automatically switches from the PS mode back to the RT mode Remote control unit when an RT broadcast is resumed e The RT mode cannot be set in the AM band or for FM stations not When the station currently tuned in is offering a radio text offering RDS broadcasts 2 message service the message scrolls on the display To turn the RT mode off press the RT button and switch to the desired display mode Refer to page 18 46 12 EXPANDING TO A 6 1 OR 7 1 CHANNEL SYSTEM e The DHT M330DV is equipped with a decoder function allowing 6 1 or 7 1 channel playback Dolby Digital EX DTS ES
88. t side as seen from the front to the L terminals the speaker system for the right channel to the R terminals Refer to the instructions supplied with the speaker system for details Be sure to use speaker systems with an impedance of 6 Q ohms or greater system connectors while the system is operating may result in malfunctions Be sure to unplug the power cord before changing connections AV SURROUND RECEIVER AVR M330 Connecting the 5 1ch speaker AC CORD AC 230 V 60 Hz SBR et FM C0AX 75 O SPEAKER SYSTEMS ANTENNA System cords audio cord im AC 230 V 50 Hz SYSTEM m DIGITAL OU CONNECTOR PCM BITSTRE 1 E PTICAL Ga XS me AUDIO OUT VIDEO OUT E E L ERE o dile ERE mp gt l T 3 W CN e mm el Jo l DVD PLAYER v Ch m DVD M330 Y Optical cord 14 6 PART NAMES AND FUNCTIONS AV SURROUND RECEIVER AVR M330 Front Panel e For details on the functions of these parts refer to the pages given in parentheses D E N O N AV SURROUND RECEIVER AVR M330 FUNCTION VOLUME LEVEL MASTER VOLUME SURROUND PARAMETER PHONES SURROUND MODE SDB P EQ MENU SET Q DO DOLEY Da SE Power operation switch ON STANDBY cece 29 D Surround parameter button SURROUND PARAMETER 34 e Remote EE E 19 O Headphones jack PHONES see
89. teta Ead tet oet 38 Surround mode button SURROUND MODE 30 Volume control MASTER VOLUME anssiensnena 29 amp Super Dynamic Bass Preset EO button SDB P EO 32 O Display Menu set button MENU SET ssssss 27 31 42 B Function selector knob FUNCTION 30 Q Select button SELECT a andki 31 37 38 42 15 ENGLISH Remote control unit e For details on the functions of these parts refer to the pages given in parentheses e Some of the buttons on the remote control unit have some functions The functions are switched using the remote control Mode selector switches Call button 0 dI O Test tone DUTTON E 33 ZEL o qq Input MOOS selector DOOR ccce euer 30 Sei D DVD play button T O93 Ga T B DVD stop button CDSRS 1 l D DVD skip buttons p DVD search buttons DVD pause button p Sound enhancer BUTTON myosine cO Y 32 B DVD Setup button D Channel select DH en u a ee reds 33 39 En Return button e Display button e Angle button e Audio selector button eb Remote control signal transmission window 19 e Reger ec VET 29 DE BE 18 20 21 26 Zoom button e Slide mode button CD SRS button 30 Random button 4f PARAMETER E 31 T ner tuning EES nen 42 amp Tuner preset BU ONE nee een 43 44 e Function selector UttON ea 29 e Surround mode sel
90. wn below appears adjust the volume MASTER VOLUME lt Em Remote control unit MMC Select the speaker whose level you want to adjust Main unit Remote control unit e he channel switches as shown below each time the button l is pressed Use the channel volume adjust buttons to adjust so that the volume of the test tones is the same for all the speakers Pirm FRONT L CENTER FRONT R e The lt and gt cursor buttons on the remote control unit SUBWOOFER SURROUND L SURROUND R during the adjustments using the test tones CH SELECT lt lt gt A m AN d NM N N Remote control unit Remote control unit 4 Adjust the volume level of the selected speaker while the channel level is displayed 4 After adjusting using the test tones adjust the channel levels either according to the playback sources or to suit your tastes as described below gt A TEST TONE UN Remote control unit X Once the channel level setting is completed select END at step Remote control unit 3 The display returns to normal after several seconds 33 ENGLISH 2 Playing in the AUTO DECODE mode e In the auto decode mode it is possible to play in the Dolby Digital or DTS Surround mode depending on the format of the input signal e t is also possible to play in the Auto Stereo Dolby Pro Logic If Cinema Music Game or DTS NEO 6 Cinema Music mode according to the 2 channel mode setting e Applicab

Denon DHT-M330DV User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents