Home

Denon AVR-4802 User's Manual

image

Contents

1. X When the surround back speaker setting is set to 1spkr for Example When i while the test tone is being produced from the subwoofer Speaker Configuration this is set to SB Use the CURSOR buttons to adjust all the speakers to the same volume The volume can be adjusted between 12 dB and 12 dB in units of 1 dB b When the Manual mode is selected Move jog stick ENTER left and right to select the speaker for which you want to output test tones then move jog stick ENTER back and forth to adjust so that the volume of the test tones from the various speakers is the same Flashing Test Tone Mana he v EK a S w aF ZA Ro Be AB FL 12 og I olume is set to 12 dB SW ch 120B o C FR SR SBRSBL SL SW 12 12 tez Om On On me Om Og 0 4 12 2 2 12 Es Y Example When while the subwoofer is selected he volume is set to 12 dB After the above settings are completed press the ENTER button again The Channel Level screen reappears X To cancel the settings select Level Clear and Yes on the Channel Level screen then make the settings again The level of each channel should be adjusted to 75 dB C weighted slow meter mode on a sound lev
2. VIDEO OUT DVD player J Connecting a DVD player pr DVD IN jacks e Connect the DVD player s color difference Pp component video output jacks COMPONENT VIDEO OUTPUT to the COMPONENT DVD IN jack using 75 Q ohms coaxial video pin plug cords e In the same way another video source with component video outputs such as a TV DBS SAT tuner etc can be connected to the TV DBS SAT color difference component video jacks Monitor TV Connecting a monitor TV COMPONENT MONITOR OUT jack VIDEO IN e Connect the TV s color difference component Po Pr Y video input jacks COMPONENT VIDEO INPUT to the COMPONENT MONITOR OUT jack using 75 Q ohms coaxial video pin plug cords p et e The color difference input jacks may be indicated differently on some TVs monitors or video components Pr Pb and Y R Y BY and Y Cr Cb and Y etc For details carefully read the operating instructions included with the TV or other component N DVD MONITOR SPEAKER SYSTEMS PAS RNT AN Couette 0 L Y Pe Ce Pr CR Y Ps Ce Pr CR Y Ps Ce Pr CR Y Ps CBe PR CR ant ae IN OUT OUT 0 SURROUND 0 A q p A q we UO ASA DVD VDP TV ces V AUX VCR 1 VCR 2 VCR 3 VCR 1 VCR 2 VCR 3 1 MONITOR 2 EN sumo IER Connecting the antenna terminals DIRECTION OF BROADCASTING STATION F type converter plug attached e When using the FM antenna attach to
3. Press the CURSOR PAGE button to a N 2 ae t highlight the display then use the SUPERASTADLUM jog stick to set the parameters ROOM SIZE Select TONE m 4med i um gt 4 REG EFFECT 15 gt Q D COMP MID Remote control unit 3 D SAROSA 4456 EM plo q Default Yes 3 aren Switch to the Tone Control screen N Tone Control GTone Defeat on 4 EA 4m Bass 4 6dB gt Remote control unit Treble 4 108 gt AJ HOME THX CINAMA DOLBY DTS DSP SIMU lt suRrRounD 25 gt CURSOR CH IPAGE SELECT AVAMP DENON PURE DIRECT DIRECT STEREO SCH TCH STEREO O To select Bass or Treble PUSH ENTER t To set the level See page 35 PUSH ENTER quim Remote control unit X If you do not want the tone to be adjusted set Tone Defeat to ON PUSH ENTER q Remote control unit PUSH ENTER Remote control unit Enter the setting The surround menu screen re appears CURSOR IPAGER Remote control unit Press the CURSOR PAGE button so that the display is no longer highlighted then SURR PARA button to complete the setting e To operate the tone control from the main unit 1 TONE CONTROL Main unit The tone switches as follows each time the TONE CONTROL button is pressed BASS TREBLE 2 SELECT 0 Ma
4. 40 2 When the MULTI ZONE terminal output is set to Fixed 40dB OdB The AVR 4802 is equipped with audio pre output terminals with a fixed output level M ZONE 1 as the MULTI ZONE output terminals Settings can be made at the system setup menu so that the same source as the M ZONE 1 pre out terminals can be played from the speakers connected to the M ZONE 1 speaker terminals E When using the PRE OUT MULTI ZONE terminals ANOTHER ROOM MAIN ROOM AVAMEEDENON lt m zonE1 45 gt Gi INTEGRATED AMPLIFIER H When using the SB MULTI speaker terminals ANOTHER ROOM MAIN ROOM CEDIO AVR 4802 RC 8000 RC 8001ST NOTE When the main unit is set to the recording output mode the M ZONE 1 remote control unit key cannot be operated See page 36 2 When using a separately sold room to room remote control unit RC 616 617 or 618 When the main room and another room are far apart and operation is not possible with RF transmission operation is possible using a separately sold room to room remote control unit RC 616 617 or 618 For details refer to the operating instructions of the RC 616 617 or 618 ANOTHER ROOM MAIN ROOM 030 6 INTEGRATED we AMPLIFIER z REMOTE Z CONTROL UNIT ROOM TO ROOM REMOTE CONTRO
5. e Precautions when placing speakers If a speaker is placed near a TV or video monitor the colors on the screen may be disturbed by the speaker s magnetism If this should happen move the speaker away to a position where it does not have this effect SURROUND SPEAKER SYSTEMS B NOTE When using only one surround back speaker connect it to left channel 13 6 PART NAMES AND FUNCTIONS Front Panel e For details on the functions of these parts refer to the pages given in parentheses INPUT SELECTOR MASTER VOLUME ONISTANDBY HOME PURE THX CINEMA DIRECT SURROUND MODE wi SCH 70H PHONES omecr stereo oowviors screen stereo TONE DEFEAT CINEMA VIDEO DIMMER STATUS REC MULT INeUTMODE ANALOG EXTIN MUSIC SELECT pate Power ON STANDBY switch Headphones jack PHONES O DIRECT button 0 INPUT MODE selector button 33 36 38 45 47 O ANALOG button osien 33 38 TIN button cect i 33 38 O CINEMA MUSIC button 49 O VIDEO SELECT button O VIDEO ON OFF button D DIMMER button STATUS Bit ss eo ee ee re ee sa OD REC MULTI Betts sao ii aaa SELECTOR dial SELECTOR 34 36 37 42 43 51 58 59 TUNING PRESET button
6. DTS NEO 6 e This is a surround mode for playing 6 1 or 7 1 channel stereo sources developed by Digital Theater Systems e One of two playing modes MUSIC for music sources or CINEMA for movie sources can be selected according to your preferences Tm oo e Though we recommend selecting the surround mode as described above other surround modes can also be selected 44 THX Surround EX Home THX Cinema mode When the HOME THX CINEMA button is pressed the surround mode is set as follows according to the signal that is played THX Surround EX Home THX CINEMA THX 5 1 THX DSCRT 6 1 THX MTRX 6 1 When the HOME THX CINEMA mode is set when a DVD is played check the DVD player s digital output setting and change the setting to one for which Dolby Digital and DTS bit stream signals can be output bit stream for example 1 Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode 1 Select the program source INPUT SELECTOR O Main unit Remote control unit 2 Set the input mode to AUTO soooDoooo aS INPUT MODE A Main unit Remote control unit AVAMP DENON AVAMP DENON lt Function 1 5 gt lt suRRounD 2 5 gt Select the Home THX mode HOME ae ice cate THX CINEMA CINAMA o PHONO cD DVD DOLBY DIRECT wr wv Le stereo F
7. LOOP ANT AM MONITOR COMPONENT SORE DDO RO ca FM COAX 750 PRE OUT A VCR VCR 2 3 VORA ver 2 f vers voo SOEIRO CECECECIIEES DOO REMOTE CONTROL O mr L age ao PERREEREEEE ERR CEECEE Hii a TTT TEE w HO gaunnne S VIDEO Connecting a monit or TV MONITOR OUT e Connect the TV s or S VIDEO to the MO cord TV e Connect the TV s or DBS tuner s S video output jack S VIDEO OUTPUT to the IN jack using an S jack connection cord DBS SAT Monitor TV DBS tuner s S video input S VIDEO INPUT ITOR OUTH jack using a S jack connection e The monitor TV can also be connected in the same way to the S VIDEO MON TOR OUT 2 jack Note however that the AVR 4802 s on screen display signals are not output from this jack Video d Connecting the video decks e Connect the video deck s S output jack S OUT to tl sS input jack S IN to the connection cords e Connect the video deck s S output jack S OUT to tl sS input jack S IN to the connection cords the video dec the video dec Video deck 1 S VIDEO S VIDEO S VIDEO VCR 1 OUT ne he S VIDEO VCR 1 IN jack and jack using S ja
8. see page 29 INPUT SELECTOR O Dooconooo oq o Main unit Remote control unit soooo0Do0 0090 Oo Set the input mode to AUTO 1 2 2 INPUT MODE AVAMP DENON lt FUNCTION 15 gt Main unit Remote control unit 2 Select the Surround mode DOLBY DTS DOLBY VCR 1 a DBS SAT VCR 2 VCR 3 TAPE 1 TAPE 2 HE 4 o lt i a I z S lt SURROUND 2 5 gt D SI TS SP MU AVAMP DENON Main unit Remote control unit AVAMP DENONI lt SETTING 35 gt 3 Play a program source with the DO poy ES mark INOT T ini i i 1 ANALOG SPEAKER DIGITAL E a ca o lights ES 05 Light when playing Dolby Digital sources Es IE EB e The DTS indicator lights when playing SELECT EES 6 Light DTS sources EE SIENA e The SIGNAL DETECT indicator lights DETECT when playing sources on which a O Light i tie y E 2 TS special identification signal is recorded 4 Display the surround parameter 6 1 SURROUND gt DTS ES MTRX6 1 N menu F A EQ A EQ E4 gt OFF E4 oFF am D COMP 4i Bee LFE 4 OdB gt LFE 4 O4dB gt Q TONE ima TONE ea 2 AFDM E AFDM lt 40 Remote control unit a SB CH OUT SB CH OUT AABB MTRX ON MTRX ON
9. e Analog Input sensitivity input impedance Frequency response S N Distortion Rated output e Digital D A output Digital input e Phono equalizer PHONO input REC OUT Input sensitivity RIAA deviation Signal to noise ratio Rated output Maximum output Distortion factor E Video section e Standard video jacks Input output level and impedance Frequency response e S video jacks Input output level and impedance Frequency response e Color component video terminal Input output level and impedance Frequency response E Tuner section Receiving Range Usable Sensitivity 50 dB Quieting Sensitivity Signal to Noise Ratio IHF A Total Harmonic Distortion at 1 kHz E General Power supply Power consumption Maximum external dimensions Mass E Remote control unit RC 8000 Batteries External dimensions Mass Front 125 W 125 W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D 150 W 150 W 6 Q ohms 20 Hz 20 kHz with 0 05 T H D Center 125 W 125 W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D 150 W 150 W 6 Q ohms 20 Hz 20 kHz with 0 05 T H D Surround 125 W 125 W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D 150 W 150 W 6 Q ohms 20 Hz 20 kHz with 0 05 T H D Surround Back 125 W 125W 8 Q ohms 20 Hz 20 kHz with 0 05 T H D Multi 150 W 150 W 6 Q ohms 20 Hz 20 kHz with 0 05 T H D 170 Wx 2ch 8 Q ohms 270 W x 2 ch 4 Q ohms 350 W
10. button on the icon display section to display the AVAMP icon VCR 2 VCR 3 TAPE 1 TAPE 2 AVAMP DENON UNCTION 1 5 gt Move the remote control unit s jog stick ENTER left and right to display the necessary page PUSH ENTER quim When the CURSOR PAGE button is pressed and the display is in half tone dot mesh the joystick operates as the cursor up down and left right buttons and the ENTER button This is called the cursor mode The display switches between normal and half tone dot mesh each time the CURSOR PAGE button is pressed thus switching between the page mode and the cursor mode When the display is normal the page mode is set Normal display page mode CURSOR 3 Half tone dot mesh display cursor mode pin Cursor up down left right and lt gt ENTER button Page feeding Playing the input source 1 Select the input source to be played Example CD INPUT SELECTOR O Main unit Remote control unit Select the input mode e Selecting the analog mode Press the ANALOG button to switch to the analog input ANALOG R A Main unit Remote control unit e Selecting the external input EXT IN mode Press the EXT IN on the EXT IN button on the remote control unit to switch the external input EXT IN Main unit Remote control unit e Selecting the AUTO PCM and DTS m
11. e Consult the owner s manual for your subwoofer for advice on placing he subwoofer within the listening room e If the surround speakers are direct radiating monopolar then place hem slightly behind and at an angle to the listening position and parallel to the walls at a position 60 to 90 centimeters 2 to 3 feet above ear level at the prime listening position As seen from the side e When using two surround back speakers place them at the back acing the front at a narrower distance than the front left and right speakers When using one surround back speaker place it at the rear center facing the front at a slightly higher position 0 to 20 cm than the surround speakers e We recommend installing the surround back speaker s at a slightly downward facing angle This effectively prevents he surround back channel signals from reflecting off the monitor or screen at the front center resulting in interference and making the sense of movement from the front to the back less sharp e Connect the surround speakers to the surround speaker A jacks on the AVR 4802 and set all settings on the setup menu o A This is the factory default setting For details see page 16 2 Setting for primarily watching movies using diffusion type speakers for the surround speakers For the greatest sense of surround sound envelopment diffuse radiation speakers such as bipolar types or dipolar THX types provide a wider dispersion than is possible t
12. q Default Yes J U Default Yes Press the CURSOR PAGE button to highlight the rush evTER t EN display then use the jog stick to set the parameters AVAMP DENON O jo oi Remote control unit Press the CURSOR PAGE button so that the display is no longer highlighted then press the SURR PARA button to complete the setting Remote control unit A HOME THX CINAMA DOLBY T 9 a DSP SIMU SURR CURSOR CH PARA IPAGE SELECT SURROUND 2 5 o 4 m m v PURE DIRECT DIRECT STEREO 5CH 7CH REO NOTE e When Default is selected and the jog stick is moved to the left CINEMA EQ and D COMP are automatically turned off SB CH OUT is reset CHANNEL LEVEL and the tone is set to the default value 47 Surround parameters 2 CINEMA EO Cinema Equalizer The Cinema EQ function gently decreases the level of the extreme high frequencies compensating for overly bright sounding motion picture soundtracks Select this function if the sound from the front speakers is too bright This function only works in the Dolby Pro Logic Dolby Digital DTS Surround and Wide Screen modes D COMP Dynamic Range Compression Motion picture soundtracks have tremendous dynamic range the contrast between very soft and very loud sounds For listening late at night or whenever
13. 58 59 DB TONE CONTROL button 34 AD STEREO button 34 36 39 53 59 D DOLBY DTS button 34 47 49 51 53 WIDE SCREEN button 14 5CH 7CH STEREO button DSP SIMULATION button D TONE DEFEAT button 22 SURROUND PARAMETER button 50 51 23 Channel Volume button CH VOL 42 43 MASTER VOLUME control 34 35 25 aster volume indicator VOLUME LEVEL 34 26 DIS EN E E nO MENA A E 27 nput mode indicators INPUT MODE 28 Surround speaker system indicators SURROUND SPEAKER A B O Surround back ch indicators ccccccccecceeeseeeeseeeseseeeeeeee 46 47 D PURE DIRECT indicator csssccccccscsssssesssssssssessssssssssesssssssseeees 39 D Digital signal indicators SIGNAL 34 46 47 D Remote control sensor REMOTE SENSOR 31 33 PowerINdicator els sos don od a EN Aa Pa pa a AR da 32 CB PURE DIRECT button apasasusiiaras sas anais tadaa 39 35 Input source selector dial INPUT SELECTOR poies E HOME THX CINEMA button Remote control unit e For details refer to the separate supplied RC 8000 operating instructions AVAMP DENON UNCTION 1 5 gt CHANNEL PUSH ENTER DENON 1 Transmitter Q VOL volume up down buttons 2 Touch panel O LIGHT back light button CH
14. Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings Damage Requiring Service The appliance should be serviced by qualified service personnel when The power supply cord or the plug has been damaged or B Objects have fallen or liquid has been spilled into the appliance or The appliance has been exposed to rain or The appliance does not appear to operate normally or exhibits a marked change in performance or E The appliance has been dropped or the enclosure damaged DO Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel E INTRODUCTION Thank you for choosing the DENON AVR 4802 Digital Surround A V receiver This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD as well as providing outstanding high fidelity reproduction of your favorite music sources As this product is provided with an immense array of features we recommend that before you begin hookup and operation that you review the contents of this manual before proceeding TABLE OF CONTENTS Before USING anen A EE Jie E Radha eres EAN 4 KU RESSO colt avo Espe PR DDR ca E rsa
15. When EXT IN is selected the input signals connected to AVAMP DENON the EL effect left and ER effect right jacks are output to q semine ss D the PRE OUT SBL and SBR jacks 2 EEE Cancelling the external input mode 2 ANALOG J e To cancel the external input EXT IN setting press the INPUT a MODE or ANALOG button to switch to the desired input 1 FATIN INPUT MODE ANALOG SYSTEM CURSOR TEST Em Main unit Remote control unit e When the input mode is set to the external input EXT IN the play mode DIRECT STEREO DOLBY DTS SURROUND HOME THX CINEMA WIDE SCREEN 5CH 7CH STEREO or DSP SIMULATION cannot be set NOTES e In play modes other than the external input mode the signals connected to these jacks cannot be played In addition signals cannot be output from channels not connected to the input jacks e The external input mode can be set for any input source To watch video while listening to sound select the input source to which the video signal is connected then set this mode 38 Playing audio sources CDs and DVDs The AVR 4802 is equipped with three 2 channel playback modes exclusively for music Select the mode to suit your tastes 1 PURE DIRECT mode In this mode the music is played with an extremely high level of sound quality When this mode is set all the video related circuits are turned off so that music signals can be reproduced with high quality When an analog input
16. setting e The channel level and surround parameters in the PURE DIRECT mode are the same as in the DIRECT mode e When the PURE DIRECT button is pressed while in the PURE DIRECT mode the PURE DIRECT mode is canceled and the DIRECT mode is set e The crossover frequency setting must be set to FIXED THX in the system setup in order to turn off the digital circuit when in the analog input mode in the PURE DIRECT mode See page 20 39 Multi source and multi zone playback MULTI ROOM MUSIC ENTERTAINMENT SYSTEM e When the outputs of the MULTI SOURCE AUDIO OUT terminals are wired and connected to integrated amplifiers installed in other rooms different sources can be played in rooms other than the main room in which this unit and the playback devices are installed Refer to ANOTHER ROOM on the diagram below e When a sold separately room to room remote control unit DENON RC 616 617 or 618 is wired and connected between the main room and another room the remote controllable devices in the main room can be controlled from another room using the remote control unit X To control playback devices other than the ones above either use that device s remote control unit or preset a separately sold programmable remote control unit NOTES e For the AUDIO output use high quality pin plug cords and wire in such a way that there is no humming or noise e For instructions on installation and operation of separately sold devices refe
17. 2 DSP 5CH 7CH Main unit Remote control unit VERA VERAS SIMU STEREO SURR CURSOR CH V AUX JARRA PARA IPAGE SELECT 3 Play a program source with the N Doey surrounD mark e For operating instructions refer to the manuals of the respective components lt setting 35 gt off ct MODE ON OFF A ee Sco ANALOG SPEAKER MASTER VOLUME yx EM ON EI SETUP IPAGE TONE Main unit Remote control unit Surround parameters 0 DECODER Select the decoder to be used when playing 2 channel sources in the Home THX Cinema mode PET Gisele The signals are decoded in the Dolby Pro Logic Cinema mode before undergoing THX processing PER Ennes The signals are decoded in the Dolby Pro Logic emulation mode before undergoing THX processing NEO 6 C The signals are decoded in the NEO 6 Cinema mode before undergoing THX processing AFDM Auto Flag Detect Mode Select the Auto Flag Detect Mode See page 22 SB CH OUT When Auto Flag Detect Mode is set to OFF the reproduction method of a surround back channel can be chosen The parameter which can be chosen is equivalent to the contents of a setting of Non Flag Source SBch Output see page 22 When Auto Flag Detect Mode is set to ON the parameter selected by Non Flag Source SBch Output of Setup Menu is displayed see page 22 When you change a parameter please set Auto Flag Detect Mo
18. Displays the input signal s number of channels Number of front channels Number of surround channels LFE on off SURROUND is displayed for 2 channel signal sources recorded in Dolby Surround OFFSET Displays the dialog normalization offset value See page 48 FLAG Displays the special identification signal recorded in the input signal See page 22 channel DISCRETE is displayed when discrete processing is conducted ot displayed when no identification signal is recorded MATRIX is displayed when matrix processing is conducted on the surround back Mode 6 1 SURROUND SIGNAL DOLBY DIGITAL fs 48kHz FORMAT 3 27 1 OFFSET 4dB OSD 1 Mode DTS ES DSCRT6 1 SIGNAL OTS In addition screen information is displayed in the following order when the ON SCREEN button is fs 48kHz pressed repeatedly FORMAT 3 37 1 i FLAG DISCRETE OSD 1 Input signal OSD 2 Input output OSD 3 Surround parameter OSD 4 Tone control OSD 5 Surround mode OSD 6 Surround mode OSD 7 Digital in assignment OSD 8 Tuner preset station A OSD 9 Tuner preset station B OSD 10 Tuner preset station C OSD 11 Tuner preset station D OSD 12 Tuner preset station E 46 Dolby Digital mode only with digital input and DTS Surround only with digital input Select the input source Playback with digital input Select an input source set to digital COAXIAL OPTICAL
19. EX Dolby Pro Logic DTS ES high definition 3 1 signals Japan MUSE Hi Vision audio DVD Audio SACD Super Audio CD MPEG multi channel audio etc Source here does not refer to the type of signal format but the recorded content Sources can be divided into two major categories 2 Types of sources e Movie audio Signals created to be played in movie theaters In general sound is recorded to be played in movie theaters equipped with multiple surround speakers regardless of the format Dolby Digital DTS etc Movie theater sound field Listening room sound field In this case it is important to achieve the same sense of expansion as in a movie theater with the surround channels To do so in some cases the number of surround speakers is increased to four or eight or speakers with bipolar or dipolar properties are used oo dito S22 Soe SR Surround R channel SB Surround B back channel E Surround L channel Multiple surround speakers e Other types of audio These signals are designed to recreate a 360 sound field using three to five speakers In this case the speakers should surround the listener from all sides to create a uniform sound field from 360 Ideally the surround speakers should function as point sound sources in the same way as the front speakers These two types of sources thus have different properties and different speaker settings particul
20. e To select the speaker e To select the parameter Front Sp Large 4 SRE Center Sp A Speaker Configuration Large None Subwoofer M Speaker Configuration t FSurround Lage None None None Center Sp Front Sp Subwoofer Surround Sp A Surround back Sp Surround Sp B PUSH ENTER Enter the setting a If no surround speakers are used if None is set for both A and B The System Setup Menu reappears b If both surround speakers A and B are used if either Large or Small is set for both A and B The surround speaker setting screen appears c When Front is set to Large and Subwoofer is set to Yes the set switches to the subwoofer mode d If None is set for surround speakers A None is automatically set for surround speakers B and surround back speaker NOTE e Select Large or Small not according to the actual size of the speaker but according to the speaker s capacity for playing low frequency bass sound below frequency set for the Crossover Frequency mode and below signals If you do not know try comparing the sound at both settings setting the volume to a level low
21. icon Press the AVAMP icon to display the page section SETUP lt Setup 4 4 gt Battery Sound ON PUSHENTER Push the remote control unit s jog stick O o the right to display the SETUP 3 5 page 1 Press SYSTEM SETUP at the bottom left to display the System Setup Menu on the TV screen SETUR IPAGE TONE X System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets Setting the type of speakers e The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination of speakers actually being used 1 SELECT SYSTEM SETUP VIDEO DIMMER and right Press CURSOR PAGE at the center of the bottom line on the AV AMP s SETTING 3 5 page so that this part is displayed in half tone dot mesh Make the system setups by pushing the jog stick on the remote control unit forward and backward left PUSH ENTER O At the System Setup Menu select Speaker Configuration PUSH ENTER P Switch to the speaker configuration screen PUSH ENTER O PUSH ENTER quim Set whether or not speakers are connected and if so their size parameters
22. is set for both A and B X For the WIDE SCREEN and 5 7CH STEREO DSP simulation modes the surround speakers can be set separately Setting the Crossover Frequency Set the crossover frequency mode according to the speaker system being used 1 9 PUSH ENTER 4m Select the Crossover Frequency mode To select the Crossover Frequency Crossover Frequency FIXED THX Crossover Frequency SIVAR ABLE 40H 20 PUsiteNTER Enter the setting The System Setup Menu reappears Crossover frequency e Set the frequency Hz below which the bass sound of each main speakers is to output from the subwoofer or from speakers which are set to Large when not using a subwoofer crossover frequency e For speakers set to Small sound with a frequency below the crossover frequency is cut and instead the cut bass sound is output from the subwoofer or speakers which are set to Large e This crossover frequency mode is valid when Subwoofer is set to Yes at Speaker Configuration Setting or when speakers are set to Small FIXED THX Set to the THX rated 80 Hz crossover frequency VARIABLE 40 60 80 100 120 Hz Set as desired according to your speakers bass playback ability NOTES e The crossover frequency is set to 80 Hz in the HOME THX CINEMA mode e We recommend using with the crossover frequency set to FIXED THX but de
23. the use of specially designed surround speakers that offer a wide diffusion pattern bipolar dispersion or by using surround speakers that provide broad dispersion with a minimum of on axis localization dipolar dispersion Side wall mounting closer to the ceiling of the surround speakers provides the greatest envelopment minimizing localization of direct sound from the speakers 2 Music Surround With full range discrete surround channels as well as three iscrete full range front channels digital formats such as Dolby nd DTS offer thrilling surround sound music listening roducers of multi channel discrete digital music recordings most always favor the use of direct radiating monopolar urround speakers placed in the rear corners of the room ince that is how they configure their studios during the mixing creation process The DENON AVR 4802 provides the ability to connect two different sets of surround speakers and place them in the appropriate locations in your home theater room so that you can enjoy both movie soundtracks and music listening with optimum results and no compromise o vo nn 12 Component Video Switching In addition to composite video and S video switching the AVR 4802 provides 3 sets of component video Y PR CR PB CB inputs for the DVD TV and DBS SAT inputs and one set of component video outputs to the television for superior picture quality 13 Video Select Function Allo
24. 51 11 DENON ORIGINAL SURROUND MODES e The AVR 4802 is equipped with a built in high performance DSP digital signal processor that uses digital processing to recreate sound fields artificially Select one of the eight provided surround modes according to the program source you want to play and adjust the parameters to achieve a more real powerful sound field Surround modes and their features 1 WIDE SCREEN Select this to achieve an atmosphere like that of a movie theater with a large screen In this mode all signal sources are played in the 7 1 channel mode including Dolby Pro Logic and Dolby Digital 5 1 channel sources Effects simulating the multi surround speakers of movie theaters are added to the surround channels 2 SUPER STADIUM Select this when watching baseball or soccer programs to achieve a sound as if you were actually at the stadium This mode provides the longest reverberation signals 3 ROCK ARENA Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all directions 4 JAZZ CLUB This mode creates the sound field of a live house with a low ceiling and hard walls This mode gives jazz a very vivid realism 5 CLASSIC CONCERT Select this for the sound of a concert hall rich in reverberations MONO MOVIE i 6 NOTE 1 Select this when watching monaural movies for a greater sense of expansion Select this to emphasize the sense of expansion
25. Dolby Laboratories Confidential Unpublished Works 1992 1999 Dolby Laboratories All rights reserved 2 DTS Digital Surround 66 D1 DI TS Digital Surround also called simply DTS is a multi channel digital signal format developed by Digital Theater Systems TS offers the same 5 1 playback channels as Dolby Digital front left front right and center surround left and surround right as well as the stereo 2 channel mode The signals for the different channels are fully independent eliminating the risk of deterioration of sound quality du DI e to interference between signals crosstalk etc TS features a relatively higher bit rate as compared to Dolby Digital 1234 kbps for CDs and LDs 1536 kbps for DVDs so it operates with a re atively low compression rate Because of this the amount of data is great and when DTS playback is used in movie theaters a separate CD ROM synchronized with the film is played With LDs and DVDs there is of course no need for an extra disc the pictures and sound can be recorded simultaneously on the same disc so the discs can be handled in the same way as discs with other formats There are also music CDs recorded in DTS These CDs include 5 1 channel surround signals compared to two channels on current CDs They do not include picture data but they offer surround playback on CD players that are equipped with digital outputs PCM type digital output required DTS surro
26. E AE Em AN aa E E e E A E sco OL E w Fm m ojj TITE pon H E o bonde ond ndo onda nho nee PES wio 7 E E E H GE o Lom sen tan Sneeeeesnesnass e 0 ao E EE E IN OUT PREOUT SURROUND 4 E i aa T T va wens E AG e O la TE D OQO acoes oi E o 9 m E g uan o cia qr ae me O fel o Rito fel fo fe SWITCHED TOTAL 120W 1A MAX E i E E inte 2 a sla s la aa o HE fog no LD player or other component E nm equipped with digital output jacks E E 7 e E aa E E g o Video deck 2 og OPTICAL A KO A Ic E OUTPUT E E Roy R K L OUT IN E E al E Note on connecting the digital AUDIO voro i E input jacks ase E e Only audio signals are input to the E PE Rie ieee E digital input jacks For details see Video deck 1 page 6 and page 29 A O A E Roy R N L OUT IN Connecting a video decks LAUDIO VIDEO e There are three sets of video deck VCR jacks so three video decks can be connected for simultaneous recording or video copying Video input output connections e Connect the video deck s video output jack VIDEO OUT to the VIDEO yellow VCR 1 OUT jack using 75 Q ohms video coaxial pin plug cords Connecting the audio output jacks e Connect the video deck s audio output jacks AUDIO OUT to the OUT jacks using pin plug cords X Connect the another video deck to the VCR 2 or VCR 3 jacks in AUDIO yellow VCR 1 IN jack and the video deck s
27. LOGIC II O O OFF O 0dB O DOLBY DIGITAL O O OFF O 0dB O e DTS SURROUND O O OFF O 0dB O O DTS NEO 6 O O OFF O 0dB O O 5 7CH STEREO O O OFF O 0dB x O SUPER STADIUM O O OFF O 0dB x Oo ROCK ARENA O O OFF O 0dB x Oo JAZZ CLUB O O OFF O 0dB x O CLASSIC CONCERT O O OFF O 0dB x O MONO MOVIE O O OFF O 0dB x O MATRIX O O OFF O 0dB x O O Signal Adjustable O Able X No signal Not adjustable X Unable Turned on or off by speaker configuration setting Signals and adjustability in the different modes Parameter default values are shown in parentheses SURROUND PARAMETER PRO LOGIC II MUSIC MODE ONLY Modo co NEM wove ROOM EREET ORAY panorama mension Sen PURE DIRECT DIRECT x x x x x x x x x STEREO O 0dB x x x x x x EXTERNAL INPUT O 0dB x x x x x x x x WIDE SCREEN O 0dB O OFF x x O ON 10 x x x x HOME THX CINEMA x x x x x x x x x DOLBY PRO LOGIC II O 0dB O OFF O CINEMA x x x O OFF O 3 o 0 DOLBY DIGITAL O 0dB O OFF x x x x x x x DTS SURROUND O 0dB O OFF x x x x DTS NEO 6 O 0dB O OFF O CINEMA x x x x x x 5 7CH STEREO O 0dB x x x x x x x SUPER STADIUM O Note 1 O Medium O 10 x x x x ROCK ARENA O Note 2 x x O Medium O 10 x x x x JAZZ CLUB O 0dB x x O Medium O 10 x x x x CLASSIC CONCERT O 0dB x x O Mediu
28. PCM digital input 2 channel signals 1 Select the DTS NEO 6 mode DOLBY DTS SELECT Main unit Main unit Remote control unit 2 Play a program source 3 Disolay the Surround Parameter Menu SURROUND PARAMETER Main unit Remote control unit DTS NEO 6 TE a NEMA OFF EQ MIDI O dB SURROUND 2 5 gt AVAMP DENON 4 Set the various surround parameters SURROUND SELECT PARAMETER gt Q Main unit DTS NEO 6 ERINN NEMA EMA FQ AE gt OFF TED D COMP MD LFE 4 OdBp TONE 4 AFDM lt 10 SB CH OUT NON MTRX gt Default Yes a N as g M pO Be 5 Enter the setting PUSH ENTER Remote control unit PUSH ENTER Q gt Remote control unit DTS NEO 6 MUSIC D COMP MB LFE 4 0d TONE 4 AFDM lb SB CH OUT 4NON MTRX gt Default Yesa PUSH ENTER PUSH ENTER t MO E Q e Select CINEMA or MUSIC CINEMA is optimum for movies MUSIC is optimum for music software NOTES e When Default is selected and the jog stick is moved to the left MODE and TONE are automatically set to the default value e In addition CINEMA EQ is set to OFF
29. PUSH ENTER Switch to the On Screen Display screen On Screen Display EN 4 gt OFF PUSH ENTER 4m Select ON or OFF PUSH ENTER Enter the setting The System Setup Menu reappears Auto tuner presets Use this to automatically search for FM broadcasts and store up to 40 stations at preset channels A1 to 8 B1 to 8 C1 to 8 D1 to 8 and E1 to 8 NOTES e f an FM station cannot be preset automatically due to poor reception use the Manual tuning operation to tune in the station then preset it using the manual Preset memory operation 1 PUSH ENTER t 4 At the System Setup Menu select Auto Tuner Presets System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display 7Auto Tuner Presets 2 PUSH ENTER Switch to the Auto Preset Memory screen Auto Preset Memory Auto Tuning amp Preset Station Memory Storing Preset Memory Start Yes 4 Search YY 30 PUSH ENTER Select Yes for Start Search flashes on the screen and searching begins Completed appears once searching is completed The display automatically switches to screen X This completes system setup Once these settings are made there is no need to change them unl
30. a desired band AM or FM AVAMP DENON TUNER DENON lt l FUNCTION 1 5 23 D ING A v A TUNER 1 VI OF Remote control unit PHONO cl DBS SAT 3 Press the MODE button to set the auto tuning mode VCR 1 VCR 2 VCR 3 o 5 Auto appears on the display TAPE 1 TAPE 2 HOnDa ERLE V AUX Remote control unit 4 Press the TUNING UP or DOWN button DOWN UP 7 R TA Automatic searching begins then stops when a station is tuned in Remote control unit If tuning does not stop at the desired station use to the Manual tuning operation Manual tuning Set the input function to TUNER Press the MODE button to set the manual tuning mode 1 Check that the display s AUTO indicator turns INPUT SELECTOR O Main unit Remote control unit Remote control unit Press the TUNING UP or DOWN button to tune in the desired station The frequency changes continuously when the button is held in TUNING TUNING DOWN UP Remote control unit Nat Remote control unit Switch the remote control device to TUNER Watching the display press the BAND button to select the 4 desired band AM or FM NOTES e When in the auto tuning mode on the FM band the STEREO indicator lights on the display when a stereo broadcast is tuned in At open frequencies the noise is muted
31. and the TUNED and STEREO indicators turn off e When the manual tuning mode is set FM stereo broadcasts are received in monaural and the STEREO indicator turns off 57 Preset memory Use the Auto tuning or Manual tuning operation to tune in the station to be preset in the memory Press the MEMORY button MEMORY 4 Remote control unit Main unit Press the MODE SELECT button until TUNER PRESET appears on the set s display Remote control unit Press the SHIFT button and select the desired memory block lt l PRESET 13 gt lt MoDE 23 PD TUNER DENON TUNER DENON DOWN BAND A to E PRESET ga SHIFT Main unit Remote control unit Main unit Press the MEMORY button again to store the station in the Select the desired preset channel 1 to 8 Remote control unit Press the PRESET UP or DOWN button to select the desired preset channel 1 to 8 SELECT CHANNEL O Main unit Remote control unit preset memory Remote control unit To preset other channels repeat steps 2 to 5 A total of 40 broadcast stations can be preset 8 stations channels 1 to 8 in each of blocks A to E Checking the preset stations The preset broadcast stations can be checked on the on screen display 1 Press the ON SCREEN button repeatedly until the Tuner Preset Stations screen a
32. are selected automatically according to the A A A A A A surround mode speaker Crossover Set the crossover frequency according to the speakers bass FIXED THX Frequency playback ability Subwoofer mode This selects the subwoofer speaker for playing deep bass signals LFE THX SB CH Auto Set the method of playing the surround back channel for digital auto Flag Detect Mode ON Non Flag Source SBch Output THX Surround EX DTS ES Flag Detect signals This parameter is for optimizing the timing with which the audio Front L amp R Center Subwoster Surround L amp R SBL amp SBR Delay Time signals are produced from the speakers and subwoofer according to the listening position 12 ft 3 6 m 12 ft 3 6 m 12 ft 3 6 m 10 ft 3 0 m 10 ft 3 0 m Multi Zone 1 This sets the output level for the multi zone 1 E vol Level output jacks Variable Multi Zone 5 put Control 5 7 Power AMP Set this to switch the surround back channel s y e e Surround Back Assignment power amplifier for use for multi zone 2 This adjusts the volume of the signals output from the speakers and Front L Front R Center Surround Surround Surround Surround Subwoofer fae subwoofer for the different channels in order to obtain optimum Top L R Back L Back R effects 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB This parameter is for detecting the maximum level of the low bass Subwoofer ras signals output from the subwoofer channel in order
33. attention to the following before using this unit e Moving the set e Store this instructions in a safe place To prevent short circuits or damaged wires in the connection After reading store this instructions along with the warranty in a cords always unplug the power cord and disconnect the safe place connection cords between all other audio components when moving the set e Note that the illustrations in this instructions may differ from the actual set for explanation purposes e Before turning the power switch on Check once again that all connections are proper and that there are not problems with the connection cords Always set the power switch to the standby position before connecting and disconnecting connection cords X 10 cm or more 2 CAUTIONS ON INSTALLATION Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV If this happens take the following steps 1 Z e Install this unit as far as possible from the tuner or TV do e Set the antenna wires from the tuner or TV away from this unit s 40 cavenmore power cord and input output connection cords p e Noise or disturbance tends to occur particularly when using indoor antennas or 300 Q ohms feeder wires We recommend using outdoor antennas and 75 ohms coaxial cables wall For heat dispersal leave at least 10 cm of space between the top back and sides o
34. connections are correct then turn on the main unit s power ON STANDBY Main unit Either lightly press on the remote control unit s touch panel or press the LIGHT button to turn on the liquid crystal display The back light does not turn on when the touch panel is pressed By default the liquid crystal display is set to display for 30 seconds but this can be changed to approximately 120 seconds using the procedure described below so that operations during system up can be performed securely rie tv Lightly press the remote control unit s jog stick PUSH ENTER to display the icon display section Press the button in the icon display section to display the SETUP icon TAPE 1 NY TAPE 2 Press the SETUP icon for at least 3 seconds to display the setup screen PUSHENTER Push the remote control unit s jog stick to the right to display the SETUP 4 4 page Press the LCD 30s button on this page so that this part is displayed in half tone dot mesh Battery Sound Calibration Now press the A button to set the time display to 120s LCD 30s Light 5s RF IR Select RF Secret 18 oo oOo o oo amp ono Oo Dooooooo ono Oo 2 5 6 7 8 Press the button in the icon display section to display the AVAMP
35. enough so as not to damage the speakers to determine the proper setting 19 e Parameters None Yes 2spkr X If the and s range sera tis Select this when using speakers that have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode aunt ones Rares Select this when using speakers that do not have sufficient performance for reproducing bass sound below the frequency set for the Crossover Frequency mode When this is set bass sound with a frequency below the frequency set for the Crossover Frequency mode is sent to the subwoofer or main speakers selected Large LEERS Select this when no speakers are installed o E Select Yes when a subwoofer is installed No when a subwoofer is not installed s 1spkr Select the number of speakers to be used for the surround back channel subwoofer has sufficient low frequency playback capacity good sound can be achieved even when Small is set for the front center urround speakers e full advantage of the performance of the Home THX certified speaker systems set the front center and surround speaker size X To ta parameters to Small and the subwoofer to Yes X For the majority of speaker system configurations using the SMALL setting for all five main speakers and Subwoofer On with a connected oofer will yield the best results subw X When Front is set to Small Subwoofer
36. format the additional SB channel signals undergo matrix encoding and are input to the SL and SR channels beforehand Upon playback they are decoded to the SL SR and SB channels The performance of the encoder used at the time of recording can be fully matched using a high precision digital matrix decoder developed by DTS thereby achieving surround sound more faithful to the producer s sound design aims than with conventional 5 1 or 6 1 channel systems In addition the bit stream format is 100 compatible with conventional DTS signals so the effect of the Matrix 6 1 format can be achieved even with 5 1 channel signal sources Of course it is also possible to play DTS ES Matrix 6 1 encoded sources with a DTS 5 1 channel decoder When DTS ES Discrete 6 1 or Matrix 6 1 encoded sources are decoded with a DTS ES decoder the format is automatically detected upon decoding and the optimum playing mode is selected However some Matrix 6 1 sources may be detected as having a 5 1 channel format so the DTS ES Matrix 6 1 mode must be set manually to play these sources For instructions on selecting the surround mode see page 47 The DTS ES decoder includes another function the DTS Neo 6 surround mode for 6 1 channel playback of digital PCM and analog signal sources E DTS Neo 6 surround This mode applies conventional 2 channel signals to the high precision digital matrix decoder used for DTS ES Matrix 6 1 to achieve 6 1 channel surround playback Hi
37. front speakers Front speaker e Consult the owner s manual for your subwoofer for advice on placing the subwoofer within the listening room e If the surround speakers are direct radiating monopolar then place them 60 to 90 cm slightly behind and at an angle to the listening position and parallel to the walls at a position 60 to 90 centimeters 2 to 3 feet above ear level at the prime listening position As seen from the side e Connect the surround speakers to the surround speaker A jacks on the AVR 4802 and set all settings on the setup menu to A This is the factory default setting For details see page 16 The surround speakers can be switched freely during playback with the surround parameter adjustment For instructions see page 35 The AVR 4802 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater 1 Dolby Surround Dolby Digital Dolby Surround AC 3 Dolby Digital is the multi channel digital signal format developed by Dolby Laboratories Dolby Digital consists of up to 5 1 channels front left front right center surround left surround right and an additional channel exclusively reserved for additional deep bass sound effects the Low Frequency Effects LFE channel also called the 1 channel containing bass frequencies of up to 120 Hz Unlike the analog Dolby Pro Logic form
38. monaural the surround left and right channels were the same with previous Dolby Pro Logic but Dolby Pro Logic II they are played as stereo signals e Various parameters can be set according to the type of source and the contents so it is possible to achieve optimum decoding see page 49 X Sources recorded in Dolby Surround These are sources in which three or more channels of surround have been recorded as two channels of signals using Dolby Surround encoding technology Dolby Surround is used for the sound tracks of movies recorded on DVDs LDs and video cassettes to be played on stereo VCRs as well as for the stereo broadcast signals of FM radio TV satellite broadcasts and cable TV Decoding these signals with Dolby Pro Logic makes it possible to achieve multi channel surround playback The signals can also be played on ordinary stereo equipment in which case they provide normal stereo sound There are two types of DVD Dolby surround recording signals 2 channel PCM stereo signals 2 channel Dolby Digital signals When either of these signals is input to the AVR 1602 the surround mode is automatically set to Dolby Pro Logic II when the DOLBY DTS SURROUND mode is selected EH Sources recorded in Dolby Surround are indicated with the logo mark shown below Dolby Surround support mark NI poy surrouno Manufactured under license from Dolby Laboratories Dolby Pro Logic and the double D symbol are trademarks of
39. or M DIRECT STEREO A Main unit Remote control unit 4 Set the recording mode 36 Dooooooo qq o Dooooooo on Display 2 DVD VDP TV DBS X MD TAPE NOTES e Recording sources other than digital inputs selected in the REC OUT mode are also output to the multi source audio video output jacks e Digital signals are not output from the MULTI ZONE audio output jacks AVAMP DENON lt SURROUND25 gt HOME THX PURE CINAMA DIRECT DOLBY DIRECT STEREO DSP SCHI7CH SIMU STEREO SURR CURSOR CH PARA IPAGE SELECT 3 Outputting a program source to an amplifier etc in a different room MULTI mode Press the REC MULTI button until M 1 ZONE SOURCE appears on the set s RES display Main unit Select the source you want to record SELECT appears on the set s display e The MULTI indicator lights e The indicator for the selected program source light e When the AVR 4802 is in the REC Main unit OUT mode the source cannot be output using the M ZONE 1 buttons on the remote control unit Start playing the source to be output e For operating instructions refer to the manuals of the respective components To cancel press the REC MULTI button REC MULTI and select SOURCE Main unit AVAMP DENON lt l M zoNE1 4 5 V VOLUME VOLUME D
40. or two channels are required in order to achieve a THX Surround EX system with the AVR 4802 Adding these however allows you to achieve stronger surround effects not only with sources recorded in THX Surround EX but also with conventional 2 to 5 1 channel sources The WIDE SCREEN mode is a mode for achieving surround sound with up to 7 1 channels using surround back speakers for sources recorded in conventional Dolby Surround as well as Dolby Digital 5 1 channel and DTS Surround 5 1 channel sources Furthermore all the Denon original surround modes see page 52 are compatible with 7 1 channel playback so you can enjoy 7 1 channel sound with any signal source E Number of surround back speakers With THX Surround EX the surround back channel consists of one channel of playback signals but we recommend using two speakers When using dipolar speakers in particular it is essential to use two speakers Using two speakers results in a smoother blend with the sound of the surround channels and better sound positioning of the surround back channel when listening from a position other than the center E Placement of the surround left and right channels when using surround back speakers Using surround back speakers greatly improves the positioning of the sound at the rear Because of this the surround left and right channels play an important role in achieving a smooth transition of the acoustic image from the front to the back As shown on the diagram abov
41. output to the VIDEO MONITOR OUT 1 video signal output jack yellow if the monitor TV is not connected to the S video MONITOR OUT 1 video signal output jack REMOTE CONTROL UNIT e The included remote control unit RC 8000 can be used to operate not only the AVR 4802 but other remote control compatible DENON components as well Furthermore it is equipped with a function for learning the control signals of remote control units of other manufacturers so it can also be used to operate non DENON remote control compatible video components e For details refer to the separate supplied RC 8000 operating instructions Using the remote control unit Approx 22 feet 7 m e Point the remote control unit at the remote sensor on the main unit as shown on the diagram e The remote control unit can be used from a straight distance of approximately 22 feet 7 meters from the main unit but this distance will be shorter if here are obstacles in the way or if the emote control unit is not pointed directly at the remote sensor e The remote control unit can be operated at a horizontal angle of up o 30 degrees with respec NOTES e It may be difficult to opera sensor is exposed to direc to the remote sensor e the remote control unit if the remote sunlight or strong artificial light e Do not press buttons on the main unit and remote control unit simultaneously Doing so may result in malfunction e Neon signs or o
42. phono etc is selected the digital processing circuitry is also turned off to achieve analog sound with even higher purity PURE DIRECT Main unit Remote control unit PURE DIRECT display lights SIGNAL odia EB DREST o o o X The display is off in the PURE DIRECT mode DIRECT mode Use this mode to achieve good quality 2 channel sound while watching images In this mode the audio signals bypass such circuits as the tone circuit and are transmitted directly resulting in good quality sound DIRECT PY Main unit Remote control unit STEREO mode Use this mode to adjust the tone and achieve the desired sound while watching images STEREO STEREO PY Main unit Remote control unit VIDEO ON OFF button When no video signals of a DVD etc are connected to the AVR 4802 and the DVD etc are connected directly to a TV etc the unneeded video circuitry can be turned off by selecting the VIDEO OFF setting VIDEO ON OFF Main unit oooon eG oooga oo o AVAMP DENON lt SURROUND25 gt HOME THX PURE CINAMA DIRECT DOLBY DIRECT ne DSP 5CH 7CH SIMU STEREO SURR CURSOR CH PARA IPAGE SELECT NOTES e The system setup function cannot be used when the PURE DIRECT mode is set or the VIDEO OFF setting is selected To use the system setup function cancel the PURE DIRECT mode or selec the VIDEO ON
43. position and the different speakers to set the delay time for the surround mode e The delay time can be set separately for surround speakers A and B Preparations Measure the distances between the listening position and the speakers L1 to L5 on the diagram at the right L1 Distance between center speaker and listening position L2 Distance between front speakers and listening position L3 Distance between surround speakers and listening position L4 Distance between surround back speakers and listening position L5 Distance between subwoofer and listening position FL Center FR A Subwoofer 2 L B a SBL SBR A an Y Listening position NW At the System Setup Menu select Delay Time 1 PUSH ENTER t System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets J Switch to the Delay Time screen PUSH ENTER Select the desired unit meters or feet Select darken the desired units Meters or Feet 3 PUSH ENTER Delay Time Set The Distance To Each Speakers Do You Prefer In Meters In Feet EMeters 4 Feet a 7 Delay Time Set The Distance To Each Speakers Do You Prefer In Meters In Feet GMeters 4 gt Lai Example When Fee
44. the literature accompanying the appliance WARNING To REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT FULLY INSERT ATTENTION POUR EVITER LES CHOCS ELECTRIQUES INTERODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This Class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations Cet appareil num rique de la classe B respecte toutes les exigences du R glement sur le mat riel brouilleur du Canada E NOTE ON USE OBSERVATIONS RELATIVES A L UTILISATION dust poussi re e Keep the set free from moisture water and e Prot ger l appareil contre l humidit l eau et la e Do not let foreign objects in the set e Ne pas laisser des objets trangers dans l appareil e Avoid high temperatures Allow for sufficient heat dispersion when installed on a rack e Eviter des temp ratures lev es Tenir compte d une dispersion de chaleur suffisante lors de l in
45. to these outlets is turned on and off in conjunction with the POWER switch on the main unit and when the power is switched between on and OUTPUT standby from the remote control unit AC cord Supplied il AC outlets wall AC 120V 60Hz ERR LOOP ANT m Ww m mus MONITOR COMPONENT VIDEO L 1 FM COAX 750 9 Stu 7 N fal 5 sveo DBs VAUX VCR 1 VCR2 VOR3 VCRA VCRZ VCRS 1 MONTOR SAT Eo ACIN SPEAKER IMPEDANCE FRONT CENTER ys ANTENNA O um mor AN Prono vena TE EE ES lt Turntable O A MM cartridge m O rhc neo O AE lee E POWER E ANP 1 my m E ROOM TO ROOM fo 0 fo 0 SWITCHED TOTAL 120W 1A MAX i REMOTEMONTROL AV 120V 60Hz E coa ota E E E r Extension jacks for future use nn Ground wire Connecting a turntable Connect the turntable s output cord to the AVR 4802 s PHONO jacks the L left plug to the L jack the R right plug to the right jack NOTE This unit cannot be used with MC cartridges directly Use a separate head amplifier or step up transformer If humming or other noise is generated when the ground wire i
46. 20 ELECTRIC SERVICE EQUIPMENT 2S GROUNDING CONDUCTORS NEC SECTION 810 21 GROUND CLAMPS POWER SERVICE GROUNDING dt ELECTRODE SYSTEM NEC ART 250 PART H NEC NATIONAL ELECTRICAL CODE AS Power Sources The appliance should be connected to a 20 Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them paying particular attention to cords at plugs convenience receptacles and the point where they exit from the appliance Cleaning The appliance should be cleaned only as recommended by the manufacturer Power Lines An outdoor antenna should be located away from power lines Outdoor Antenna Grounding If an outside antenna is connected to the receiver be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Article 810 of the National Electrical Code ANSI NFPA 70 provides information with regard to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode See Figure A Nonuse Periods The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time Object and Liquid Entry
47. ANNEL up down buttons 9 Battery charging contacts O MUTE button D RF frequency selector switch O USB terminal D Reset button O Jog stick PUSH ENTER Battery cover X The USB terminal is a terminal that will be used in the future to update the microprocessor program etc 15 SETTING UP THE SYSTEM e Once all connections with other AV components have been completed as described in CONNECTIONS see pages 6 to 13 make the various settings described below on the monitor screen using the AVR 4802 s on screen display function These settings are required to set up the listening room s AV system centered around the AVR 4802 e Use the following buttons to set up the system AVAMP DENON AVAMP DENON AVAMP DENON AVAMP DENON UNCTION 1 5 gt lt Function 15 gt r HOME THX PURE ON OFF TUNER CINAMA DIRECT a csi TV DTS STEREO co ie sit SURR e cH YAUN p TAPES TAPE 2 PARA IPAGE SELECT A SURROUND 2 5 gt lt seTTING 35 gt INPUT M ZONE 1 MODE ON OFF ON BATAN SCREEN SYSTEM CURSOR TEST SETUP IPAGE TONE p elo HG g AVAMP DENON AVAMP DENON Transmission codes lt m zone1 45 gt M ZONE2 515 gt of independent buttons lt VOLUME DOWN CHANNEL yor O O CHANNELA Tuner preset CHANNELY Tuner preset Screen while icons
48. AR PEER earner RASA 42 51 2 Cautions on Installato usasse romanas pesei aerea ees 4 11 DENON Original Surround Modes ccccccescsseeeseseeseesteeeseeeeeeseneeee 52 56 3 Cautionsiondiandling ses ecser sees acs seesaaia usaezberessazastaceeee EECA STEATEN 5 t2 Listening tothe Radio res saperostuest anita ninrin iadsaii iaie 57 59 4 SFEATUNES 2 225 2ssazesecetvesecenusousnes sus aaee AECE E AEE Eae 5 13 Last Function Memorare ceseawnesseica ssa ck eceieccquneronivrenand 59 5 COnne ction c cececccecccccccseseesesecseescsecsescsecseessescseceessseseeeessesaeeeeseseeeess 6 13 14 Initialization of the MicroproceSSOl ccccceeeeceeeeeeeeeeeeeeeeeeeeeees 59 6 PartiNames and Functions ss OR A ala TES 14 15 15 Troubleshotih gree ROEDOR RR RD O RO tides SEER 60 7 Setting up the system isentas 16 31 16 Additional Information 61 70 8 Remote Control Unit asso ateei aaraa canai EEEa naani aia aas dda 31 Z Specifications kainan A O EE atta a seats das EEE RESA 71 9 Operation E ACCESSORIES Check that the following parts are included in addition to the main unit D Operating instructions Warranty for North America model only 1 Service station list 1 OAC cord cect 1 AVR 4802 eee cececccceeee 1 Remote control unit LR6 AA alkaline batteries 4 7 AM loop antenna 1 FM indoor antenna 1 RUC ROOD irrien 1 RC 8000 e 1 pa NE 1 BEFORE USING Pay
49. CATE BLINKING SP Default Yes 4 Front L 12ft Front R 12ft Center 1ft ea Subwoofer 41 6ft gt B E PusueNteR Enter the setting The System Setup Menu reappears Setting the Multi Zone Control The AVR 4802 automatically sets the optimum surround delay time for the listening room Multi zone is a pre output with an output level adjustment function Using the power amplifier assignment function described below it is also possible to connect speakers to the SB MULTI speaker terminals 1 Power amplifier assignment function setting Make this setting to switch the power amplifier for the surround back channel to Multi zone 1 At the System Setup Menu select Multi Zone Control 5 Multi Zone Control System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets Ed 2 eee cine Press jog stick ENTER to switch to the Multi Zone Control screen Power Amp Assignment Multi Zone Control Multi Zone Vol Level Exit Select Power Amp Assignment then press the ENTE PUSH ENTER 3 f R button on the jog stick 24 Select Surround Back to use as the surround back P A Assi t P A Assi t channel Multi to use as multi zone then press jog WET AMP ASSI gNMEN OWE KAM
50. DENON AV SURROUND RECEIVER AVR 4802 OPERATING INSTRUCTIONS EH We greatly appreciate your purchase of the AVR 4802 EH To be sure you take maximum advantage of all the features the AVR 4802 has to offer read these instructions carefully and use the set properly Be sure to keep this manual for future reference should any questions or problems arise SERIAL NO PLEASE RECORD UNIT SERIAL NUMBER ATTACHED TO THE REAR OF THE CABINET FOR FUTURE REFERENCE E SAFETY PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the A presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and A maintenance servicing instructions in
51. L SYSTEM separately sold control line MULTI SOURCE AUDIO signal cable SPEAKER cable Refer to CONNECTIONS on pages 6 to 13 REMOTE CONTROL UNIT Room to Room Remote Control jacks e The OUT jack is an extension jack for future use e When the OUT jack is connected the signals input to the IN jack are output from the OUT jack directly Example RC616 signals are output e Do not connect only the OUT jack The signals from the AVR 4802 s remote sensor are not output to this jack 41 SURROUND Before playing with the surround function e Before playing with the surround function be sure to use the test tones to adjust the playback level from the different speakers This adjustment can be performed with the system setup see page 26 or from the remote control unit as described below e Adjusting with the remote control unit using the test tones is only possible in the Auto mode and only effective in the DOLBY SURROUND and HOME THX CINEMA modes The adjusted levels for the different modes are automatically stored in the memory da Test tones are output from the different speakers Press the smile sm CURSOR PAGE button to highlight the display then use the jog stick to adjust the channel level CURSOR IPAGER PUSH ENTER t button again so that the display is no longer highlighted then press the TEST TONE button to complete the operation 3 Af
52. LTD 14 14 AKASAKA 4 CHOME MINATO KU TOKYO 107 8011 JAPAN Telephone 03 3584 8111 Printed in Japan 511 3770 002
53. OWN UP TUNER PHONO cl DVD DBS SAT VCR 1 VCR 2 VCR 3 V AUX TAPE 1 TAPE 2 BBR BORGE HE When Multi is selected for the system setup s multi zone setting the source selected here is output from the SB MULTI speaker terminals The volume can be adjusted and the input source can be selected using the VOLUME UP and VOLUME DOWN buttons on the remote control unit s M ZONE 1 page NOTES e The signals of the source selected in the Multi mode are also output from the TAPE and VCR recording output terminals e Digital signals are not output from the MULTI ZONE audio output jacks 37 Playback using the external input EXT IN jacks Set the external input EXT IN EXT IN mode Press the EXT IN on the EXT IN button on the remote control unit to switch the external input Main unit Remote control unit Once this is selected the input signals connected to the FRONT L FRONT R CENTER SURR L surround left and SURR R surround right channels of the EXT IN jacks are output directly to the front left and right center and surround left and right speaker systems as well as the pre out jacks 21 without passing through the surround circuitry In addition the signal input to the SW subwoofer jack is output to the PRE OUT SW subwoofer jack
54. P hss HEME stick ENTER EA Multi 4SurroundBack gt postar psn QE Ae a Z Q Q a O a 48 X When Surround Back is selected When Multi is selected 2 Setting the multi zone level At the System Setup Menu select Multi Zone Control 1 t 5 System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets Press jog stick ENTER to switch to the Multi Zone Control screen PUSH ENTER NOTE The multi zone volume level is not displayed when Multi is selected at the Power Amp Assignment setting Multi Zone Control Power Amp Assignment Multi Zone Vol Level Exit Select Multi Zone Vol Level then press jog stick ENTER usent O en 4 Select the desired setting then press jog stick ENTER PUSH ENTER aA Gy Variable The level can be adjusted freely using the buttons on the remote control unit M ZONE 1 4 5 VOLUME UP and VOLUME DOWN 40 dB 0 dB The output level is fixed at the set level and the volume can no longer be adjusted Multi Zone Vol Level gt 40dB OdB Setting the channel level Use this setting to adjust so that the playback level between the different channels is equa
55. RE OUT CORT MULTE ARB 660 TAPE ZONE al 127 emun g A a E iS pa ROOM TO ROOM fo fo o ey fe o SWITCHED TOTAL 120W 1A MAX AV 120 60Hz Extension jacks for future use X For instructions on operations using the MULTI SOURCE jacks see page 37 11 Speaker system connections e Connect the speaker terminals with the speakers making sure that like Speaker Impedance polarities are matched O with with O Mismatching of polarities will e Speakers with an impedance of from 6 to 16 Q ohms can be connected for result in weak central sound unclear orientation of the various instruments use as front and center speakers and the sense of direction of the stereo being impaired e Speakers with an impedance of 6 to 16 Q ohms can be connected for use When making connections take care that none of the individual conductors as surround speakers of the speaker cord come in contact with adjacent terminals with other speaker cord conductors or with the rear panel specified impedance are connected NOTE NEVER touch the speaker terminals when the power is on Doing so could result in electric shocks Connecting the speaker cords 1 Loosen by turning 2 Insert the cord 3 Tighten by turn
56. Speakers A the bipolar or dipolar speakers mounted at the sides of the listening position Choose Dolby Digital DTS without THX and Surround Speakers B the direct radiating speakers mounted at the rear corners of the listening room Then by simply activating the THX function used during movie playback the Surround A speakers are automatically activated For multi channel music listening Dolby Digital or DTS music programs turn off the THX enhancements by touching the Pa 60 to 90 cm THX button on the remote control and the Surround B speakers will be automatically activated Example Movie sources Dolby DTS surround etc THX or THX 5 1 mode Speakers A usic sources DVD video DTS CD etc As seen from the side Dolby DTS surround Speakers B Surround speakers A Surround back speaker Point slightly Front speaker downwards Surround speakers B X The speakers can be switched at the touch of a button by turning HOME THX CINEMA on when playing movies and off when playing multi channel music 2 When not using surround back speakers 64 Front speakers Center speaker E T Monitor Subwoofer 45 Surround speakers As seen from above e Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible Set the center speaker between the front left Surround speaker and right speakers and no further from the listening position than the
57. TS NEO 6 O 0dB O OFF O CINEMA x x x x x x 5 7CH STEREO O 0dB x x x x x x x x SUPER STADIUM O Note 1 O Medium O 10 x x x x ROCK ARENA O Note 2 x x O Medium O 10 x x x x JAZZ CLUB O 0dB x x O Medium O 10 x x x x CLASSIC CONCERT O 0dB x x O Medium O 10 x x x x MONO MOVIE O 0dB x x O Medium O 10 x x x x MATRIX O 0dB x x x x O 30msec x x x Note 1 BASS 6 dB TREBLE O dB O Adjustable Note 2 BASS 8 dB TREBLE 4 dB X Not adjustable E Differences in surround mode names depending on the input signals Input signals Surround Mode DTS DOLBY DIGITAL ANALOG LINEAR PCM DTS 5 1 ch DTS 96 24 5 1 ch DTS 6 1 ch D D 2 ch D D 5 1 ch PURE DIRECT DIRECT O O O O O O O STEREO O O O O O O O HOME THX CINEMA THX THX THX MTRX6 1 THX5 1 THX DSCRT6 1 THX THX SURROUND EX THX5 1 THX MTRX6 1 THX5 1 DTS SURROUND x x DTS ES MTRX DTS ES MTRX DTS ES DSCRT6 1 x x DTS SURROUND DTS 96 24 DTS MTRX6 1 DTS NEO 6 DTS NEO 6 DTS NEO 6 x x x DTS NEO 6 x DOLBY DIGITAL x x x x x x 6 1 SURROUND DOLBY DIGITAL DOLBY PRO LOGIC I DOLBY DOLBY x x x DOLBY x PRO LOGIC II PRO LOGIC I PRO LOGIC II DSP SIMULATION O O O O O O O O Selectable The surround mode name differs depending on the SB CH OUT surround parameter setting The surround mode name differs depending on the input signal x Not selectable SPECIFICATIONS EH Audio section e Power amplifier Rated output Dynamic power Output terminals
58. X The fader function does not affect the SW channel X The channel whose channel level is adjusted lowest can be faded to 12 dB using the fader function X If the channel levels are adjusted separately after adjusting the fader the fader adjustment values are cleared so adjust the fader again AVAMP DENON lt SURROUND 2 5 vV HOME THX CINAMA PURI DIRECT DOLBY DIRECT va a5 m e TE mS mn DTS STEREO DSP SIMU SURR CURSOR CH PARA IPAGE SELECT H H o T Camo FL C FR SR SBR SBL SL 125 41 tz MT a This is only displayed when setting the fader control 43 Playing modes for different sources The AVR 4802 is equipped with many surround modes We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source X is a 6 1 channel 7 1 channel surround mode THX SURROUND EX e Maximum performance for playing movies on the AVR 4802 Sources recorded in Dolby Digital Surround EX 6 1 SURROUND e We recommend these for sources consisting mostly of music DTS ES DSCRT 6 1 MTRX 6 1 Sources recorded in DTS ES e This is the optimum mode for playing sources recorded in DTS ES THX DSCRT 6 1 MTRX 6 1 e When playing movies se
59. age 31 e The AVR 4802 s on screen display function is designed for use with high resolution monitor TVs so it may be difficult to read small characters on TVs with small screens or low resolutions e The setup menu is not displayed when headphones are being used e Speaker system layout Basic system layout For a THX Surround EX system e The following is an example of the basic layout for a system consisting of eight speaker systems and a television monitor Subwoofer Center speaker system Surround back speaker systems Front speaker systems Set these at the sides of the TV or screen with their front surfaces as flush with the front of the screen as possible Surround speaker systems With the AVR 4802 it is also possible to use the surround speaker selector function to choose the best layout for a variety of sources and surround modes e Surround speaker selector function This function makes it possible to achieve the optimum sound fields for different sources by switching between two systems of surround speakers A and B The settings of the different speakers A only B only or A B are stored in the memory for the different surround modes so they are set automatically when the surround mode is selected SB Surround Back Speakers Using A only Using B only Multi surround speaker system Single surround speaker system 17 Before setting up the system 1 Check that all the
60. are displayed E r VOLA Main volume of AV amplifier V AUX TAPE 1 TAPE 2 V AUX TAPE 1 TAPE 2 VOLY i Main volume of AV amplifier MUTE Muting of AV amplifier e System setup items and default values set upon shipment from the factory System setup Default settings Input the combination of speakers in your system and their Front S Center S Sub s ds Ss d Sp Back Speaker corresponding sizes SMALL for regular speakers LARGE for full TOES P eas es UTOS RP SENG SP BES Configuration size full range to automatically set the composition of the signals output from the speakers and the frequency response Small Small Yes Small Small 2spkrs Use this function when using multiple surround speaker g d DOLBY combinations for more ideal surround sound Once the ee DTS ques ee pene pF EXT IN Surround pr mode THX 5 1 SCREEN STEREO SIMULATION combinations of surround speakers to be used for the SURROUND Speaker Setting different surround modes are preset the surround SUSU speakers are selected automatically according to the A A A A A A surround mode speaker Crossover Set the crossover frequency according to the speakers bass FIXED THX Frequency playback ability Subwoofer mode This selects the subwoofer speaker for playing deep bass signals LFE THX SB CH Auto Set the method of playing t
61. are for inputting multi channel audio signals from an outboard decoder or a component with a different type of multi channel decoder such as a Super Audio DVD player or a multi channel SACD player or other future multi channel sound format decoder e When making connections also refer to the operating instructions of the other components A a o O O DVD VDP TV DBS VAUX VCRA VCRZ VCRS VCR 1 VCR2 VCRS Byes O e2 ne f d E d O supino 250 ANTENNA gt E f j AUDIO N oor TES DVD vop TV SAT VAUX VERT VCR2 VCRS VCR 1 VCR2 VCR3 O P O oo ey A 4 OPTICAL Subwoofer Surround back Decoder with 8 or 6 channel analog output X For instructions on playback using the external input EXT IN jacks see page 38 Connecting the MULTI SOURCE jacks e f another amplifier is connected the multi source jacks can be used to play a different program source in another room at the same time See page 40 RC 616 Another room INFRARED RETRANSMITTER Integrated pre main amplifier ERES sensor OUTPUT INPUT E AUX OUT DVD DP WV DBY VAUX VCRA VORZ VORS VORA VCR E E S VIDEO VCR 3 1 MONTOR 2 OUT F
62. arge from that channel only Therefore the low frequency signal range that are played from the subwoofer channel are only the low frequency signal range of LFE only during Dolby Digital or DTS signal playback and the channel specified as Small in the setup menu THX is recommended in this play mode so that bass interference is less likely to occur in the room e Select the play mode that provides bass reproduction with body 21 Setting the THX Surround EX DTS ES Source Auto Set the operation for the digital signals when playing in the 6 1 SURROUND DTS ES and THX SURROUND EX surround modes FERA At the System Setup Menu select SB CH Auto Flag T System Set Men e t Detect and press the ENTER button Speaker Configurator a TSB CH Auto Flag Detect Delay Time 4 Multi Zone Control Channel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets Ro STHXSurrounEX DTS ES THXSurroundEX DTS ES 2 Select the desired setting Auto Flag Detect Mode Auto Flag Detect Mode X When set to ON the operation for software for which ORM gt OFF ON 4 gt ii no identification signals are recorded is set Non Flag Source SBch Output a gt NON OFF DIRE MTRX Push ENTER Enter the setting The System Setup Menu reappears THX surround EX DTS ES Auto Flag Detect Mode AFDM settin
63. arly for the surround speakers are required in order to achieve the ideal sound The AVR 4802 s surround speaker selection function makes it possible to change the settings according to the combination of surround speakers being used and the surrounding environment in order to achieve the ideal surround sound for all sources This means that you can connect a pair of bipolar or dipolar surround speakers mounted on either side of the prime listening position as well as a separate pair of direct radiating monopolar speakers placed at the rear corners of the listening room 61 Surround back speakers The THX Surround EX format adds new Surround Back SB channels to the conventional 5 1 channel system This makes it easy to achieve sound positioned directly behind the listener something that was previously difficult with sources designed for conventional multi surround speakers In addition the acoustic image extending between the sides and the rear is narrowed thus greatly improving the expression of the surround signals for sounds moving from the sides to the back and from the front to the point directly behind the listening position Change of positioning and acoustic image Change of positioning and acoustic image with 5 1 channel systems with THX Surround EX system L SlLch 7 SS SRch gt Movement of acoustic image from SR to SL Movement of acoustic image from SR to SB to SL Speaker s for one
64. as if the input is excessively high when the sound crackles Subwoofer Peak Limit Level Setting Turn Up The Volume With Master Vol Up Button When Distortion Begins Push Enter Button Press the ENTER button at the point where the test noise starts sounding distorted The AVR 4802 automatically sets the subwoofer peak limit level This prevents future inadvertent subwoofer overload due to excessively strong bass content when the master volume control is at a high level X To cancel the setting use the cursor buttons on the Subwoofer Peak Limit Level Setting screen after step 2 to select OFF for Peak 28 Limiter CAUTION The master volume is set to 30 dB when test tones are output The test tones are for confirming the low frequency playback limits and are played at an extremely high level When using a low output subwoofer be very careful about irregular operations exceeding clipping by for example turning down the subwoofer s attenuator before starting then slowly turning the attenuator up to the listening level Also when the subwoofer is set to No in the speaker configuration the test tones are output from the front speakers When using front speakers with low input resistance check that the sound is not clipped at sections where the signal is strong on the CD music source before starting the peak limit setting The peak limit setting should not be p
65. at Dolby Digital s main channels can all contain full range sound information from the lowest bass up to the highest frequencies 22 kHz The signals within each channel are distinct from the others allowing pinpoint sound imaging and Dolby Digital offers tremendous dynamic range from the most powerful sound effects to the quietest softest sounds free from noise and distortion EH Dolby Digital and Dolby Pro Logic Comparison of home surround systems Dolby Digital Dolby Pro Logic No recorded channels elements 5 1 ch 2 ch No playback channels 5 1 ch 4ch Playback channels max L R C SL SR SW L R C S SW recommended Audio processing Digital discrete processing Dolby Digital AC 3 encoding decoding Analog matrix processing Dolby Surround High frequency playback limit of surround 20 kHz 7 kHz channel EH Dolby Digital compatible media and playback methods Marks indicating Dolby Digital compatibility DM psy and The following are general examples Also refer to the player s operating instructions DU rosy surrouno AC3 DIGITAL Media Dolby Digital output jacks Playback method reference page Coaxial Dolby Digital RF output jack Set the input mode to AUTO LD VDP x 1 Page 33 Optical or coaxial digital output a i a DVD same as for PCM Set the input mode to AUTO X2 Page 33 Others Optical o
66. c While offering high compatibility with the conventional DTS Digital Surround format DTS ES Extended Surround greatly improves the 360 degree surround impression and space expression thanks to further expanded surround signals This format has been used professionally in movie theaters since 1999 In addition to the 5 1 surround channels FL FR C SL SR and LFE DTS ES Extended Surround also offers the SB Surround Back sometimes also referred to as surround center channel for surround playback with a total of 6 1 channels DTS ES Extended Surround includes two signal formats with different surround signal recording methods as described below EH DTS ES Discrete 6 1 DTS ES Discrete 6 1 is the newest recording format With it all 6 1 channels including the SB channel are recorded independently using a digital discrete system The main feature of this format is that because the SL SR and SB channels are fully independent the sound can be designed with total freedom and it is possible to achieve a sense that the acoustic images are moving about freely among the background sounds surrounding the listener from 360 degrees Though maximum performance is achieved when sound tracks recorded with this system are played using a DTS ES decoder when played with a conventional DTS decoder the SB channel signals are automatically down mixed to the SL and SR channels so none of the signal components are lost E DTS ES Matrix 6 1 With this
67. ck VCR 2 IN jack and Connect the components audio inputs and outputs as described on page 7 VCR 2 OUT jack using S jack NOTES set SOURCE as the REC MULTI input function The on screen display signals are not output from the video signal MONITOR OUT 2 yellow or S Video signal MONITOR OUT 2 jack The MONITOR OUT 2 output switches together with the input function selected with the REC MULTI button To use as the monitor output Connecting a Video Component Equipped with Color Difference Component Y PB CB PR CR Video Jacks DVD Player e When making connections also refer to the operating instructions of the other components e The signals input to the color difference component video jacks are not output from the VIDEO output jack yellow or the S Video output jack In addition the video signals input to the VIDEO input yellow and S Video input jacks are not output to the color difference component video jacks e The AVR 4802 s on screen display signals are not output from the color difference component video output jacks MONITOR OUT e Some video sources with component video outputs are labeled Y Pb Pr or Y Cb Cr or Y R Y B Y These terms all refer to component video color difference output COMPONENT
68. de to OFF 2 To play in the THX Surround EX Home THX Cinema Surround mode for sources recorded in Dolby Digital or DTS 1 Select the program source Selecting a digital input source Perform step 1 under Dolby Digital mode and DTS Surround page 47 2 Select the Home THX Cinema mode D220o00000 00 o Do0o000000 00 o HOME THX CINEMA CINAMA Main unit Remote control unit 2 3 Play a program source with the DX pos Prey mark For operating instructions refer to the manuals of the respective components The channel status information during playback of Dolby Digital and DTS sources can be checked using the STATUS button on the main unit OUTPUT The surround back LED lights green when playing 06 in the THX SURROUND EX mode DIGITAL The Dolby Digital indicator lights when playing O Dolby Digital sources oe When playing DTS sources the DTS indicator Pos ights 3 AVAMP DENON lt SURROUND2 5 gt HOME THX PURE CINAMA DIRECT DIRECT STEREO SCH 7CH STEREO DSP SURR CURSOR CH PARA IPAGE SELECT Checking the input signal The input signal can be checked by pressing the remote control unit s ON SCREEN button See page 35 SIGNAL Displays the type of signal DTS DOLBY DIGITAL PCM etc fs Displays the input signal s sampling frequency Remote control unit FORMAT
69. e e To select the digital input jack Select OFF for input sources for which no digital input jacks are used PUSH ENTER mp X If Yes is selected for Default the settings are automatically reset to the default values poser Enter the setting The System Setup Menu reappears NOTES The OPTICAL 4 and 5 jacks on the AVR 4802 s rear panel are equipped with an optical digital output jack for recording digital signals on a DAT deck MD recorder or other digital recorder Use this for digital recording between a digital audio source stereo 2 channel and a digital audio recorder Do not connect the output of the component connected to the OPTICAL 4 OUT jack on the AVR 4802 s rear panel to any jack other than the OPTICAL 4 IN jack Do not connect the output of the component connected to the OPTICAL 5 OUT jack on the AVR 4802 s rear panel to any jack other than the OPTICAL 5 IN jack PHONO and TUNER cannot be selected on the Digital In Assignment screen 29 Setting the on screen display OSD e Use this to turn the on screen display messages other than the menu screens on or off 1 PUSH ENTER t O At the System Setup Menu select On Screen Display System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control Channel Level Subwoofer Peak Limit Lev Digital In Assignment FOn Screen Display Auto Tuner Presets
70. e ina movie theater the surround signals are also produced from diagonally in front of the listeners creating an acoustic image as if the sound were floating in space To achieve these effects we recommend placing the speakers for the surround left and right channels slightly more towards the front than with conventional surround systems Doing so sometimes increases the surround effect when playing conventional 5 1 channel sources in the THX Surround EX mode Check the surround effects of the various modes before selecting the surround mode 62 Speaker setting examples Here we describe a number of speaker settings for different purposes Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose 1 For THX Surround EX systems using surround back speakers 1 Basic setting for primarily watching movies This is recommended when mainly playing movies and using regular single way or 2 way speakers for the surround speakers Front speakers Center speaker t Monitor S ubwoofer 45 Surround speakers Surround back speakers As seen from above e Set the front speakers with their front surfaces as flush with the TV or monitor screen as possible Set the center speaker between the Surround speaker Surround back ront left and right speakers and no further from the listening position speaker Point slightly han the front speakers Front speaker downwards
71. e surround sounds will also collapse into the closest speaker as you move away from the middle seating position Adaptive Decorrelation slightly changes one surround channel s time and phase relationship with respect to the other surround channel This expands the listening position and creates with only two speakers the same spacious surround experience as in a movie theater THX Ultra Before any home theater component can be THX Ultra certified it must incorporate all the features above and also pass a rigorous series of quality and performance tests Only then can a product feature the THX Ultra logo which is your guarantee that the Home Theater products you purchase will give you superb performance for many years to come THX Ultra requirements cover every aspect of the product including power amplifier performance pre amplifier performance and operation as well as hundreds of other parameters in both the digital and analog domain Lucasfilm THX Home THX Re Equalization Timbre Matching Adaptive Decorrelation and THX Ultra are trademarks of Lucasfilm Ltd 6 THX Surround EX In 1999 a new surround system was launched simultaneously with the release of the movie Star Wars Episode Dolby Digital Surround EX is a new movie sound track that greatly enhances the sense of spatial expression and the positioning of the surround channel sound The result is 360 degrees of movement and moving sound effects that seem to pa
72. e 42 MASTER VOLUME OD od Main unit voL Remote control unit in the range of 70 to O to 18 dB en the channel level is set as if the volume for any channel is set at 1 dB or greater the volume cannot be adjusted up to 18 dB In this case the maximum vo ume adjustment range is 18 dB Maximum value of channel level Input mode when playing DTS source e Noise will be output if DTS compa ANALOG or PCM mode es ible CDs or LDs are played in the When playing DTS compatible sources be sure to connect the source component to the digital and set the input mode to AUTO input jacks OPTICAL COAXIAL or DTS e In the AUTO mode auto C POMO DTS o O O ANALOG e In the PCM mode INPUT MODE AUTO PCM DTS o e In the DTS mode INPUT MODE AUTO PCM DTS o 0 e In the ANALOG mode INPUT MODE AUTO PCM DTS ANALOG 6 Input signal display 0 One of these lights depending on the Bo DOLBY DIGITAL es SIGNAL otal EB DRE DOPRO LOGIC DIGITAL 0 e DTS SIGNAL odia EB DIREGr DIGITAL o oo X The DIGITAL indicator lights when digital signals are being input properly If the DIGITAL indicator does not light check whether the digital input component setup page 29 and connections are correct and whether the component s p
73. e high picture sound quality DVD video sources with 96 kHz 24 bit stereo PCM audio tracks However because the data rate for these audio tracks is extremely high there are limits to recording them on two channels only and since the quality of the pictures must be restricted it is common to only include still pictures In addition 96 kHz 24 bit 5 1 channel surround is possible with DVD audio sources but DVD audio players are required to play them with this high quality DTS 96 24 is a multi channel digital signal format developed by Digital Theater Systems Inc in order to deal with this situation Conventional surround formats used sampling frequencies of 48 or 44 1 kHz so 20 kHz was about the maximum playback signal frequency With DTS 96 24 the sampling frequency is increased to 96 or 88 2 kHz to achieve a wide frequency range of over 40 kHz In addition DTS 96 24 has a resolution of 24 bits resulting in the same frequency band and dynamic range as 96 kHz 24 bit PCM As with conventional DTS Surround DTS 96 24 is compatible with a maximum of 5 1 channels so sources recorded using DTS 96 24 can be played in high sampling frequency multiple channel audio with such normal media as DVD videos and CDs Thus with DTS 96 24 the same 96 kHz 24 bit multi channel surround sound as with DVD Audio can be achieved while viewing DVD Video images on a conventional DVD Video player X 1 Furthermore with DTS 96 24 compatible CDs 88 2 kHz 24 bit mult
74. e only performed when PCM signals are being input Note that noise may be generated when using this mode to play signals other than PCM signals DTS exclusive DTS signal playback mode Decoding and playback are only performed when DTS signals are being input ANALOG exclusive analog audio signal playback mode The signals input to the analog input jacks are decoded and played 5 EXT IN external decoder input jack selection mode The signals being input to the external decoder input jacks are played without passing through the surround circuitry NOTE Note that noise will be output when CDs or LDs recorded in DTS format are played in the PCM or ANALOG mode Select the DTS mode when playing signals recorded in DTS from a laser disc player or CD player Note on playing a source encorded with DTS e Noise may be generated at the beginning of playback and while searching during DTS playback in the AUTO mode If so play in the DTS mode 33 Select the play mode Example Stereo STEREO STEREO A Main unit Remote control unit Start playback on the selected component e For operating instructions refer to the component s manual Input mode display Adjust the volume The volume level is displayed on the master volume level display X The volume can be adjusted with in steps of 1 dB However wh described on page 25 or pag
75. e room facing towards the prime listening position As seen from the side 63 3 When using different surround speakers for movies and music To achieve more effective surround sound for both movies and music use different sets of surround speakers and different surround modes for the two types of sources Front speakers Center speaker Monitor Subwoofer Surround back speakers A Surround speakers B As seen from above e Set the front speakers slightly wider apart than the setup for watching movies only and point them toward the listening position in order assure clear positioning of the sound e Set the center speaker in the same positions as in example 1 e Set surround speakers A for watching movies in the positions described in example 1 or 2 depending on the types of speakers used e Set surround speakers B for playing multi channel music at the same height as the front speakers and slightly at an angle to the rear of the listening position and point them toward the listening position e Connect the surround speakers for watching movies to the surround speaker A jacks on the AVR 4802 the surround speakers for playing multi channel music to the surround speaker B jacks Set the surround speaker selection on the setup menu For instructions see page 19 e To activate the appropriate speakers for movies and music we suggest that during setup choose Dolby Digital DTS with THX and Surround
76. eakers with an impedance of lower than 4 Q ohms are connected If the protector circuit is activated the speaker output is cut off Turn off the set s power wait for the set to cool down improve the ventilation around the set then turn the power back on 12 e The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the Connections e When making connections also re Connection jack for subwoofer with built in amplifier super woofer etc er to the operating instructions of the other components FRONT SPEAKER SYSTEMS CENTER SPEAKER SYSTEM SURROUND SPEAKER SYSTEMS A LOOP ANT DVD TRT Ww TRT FM COAX 750 Di AM ae sw CHI DVD v w MONITOR VOR VCRZ VCRS 1 MONTOR 2 O Om SPEAKER impeDaN OKO KOKORO KOKO OKOKO AOR PREOUT supRouno E Tt 8 y AiB 8 FRONT el TER B MUL sh DIGITAL N o fe SURROUND BACK SPEAKER SYSTEMS
77. ecorded in a special way so this problem does not occur X 2 The signals provided at the digital outputs of a CD or LD player may undergo some sort of internal signal processing output level adjustment sampling frequency conversion etc In this case the DTS encoded signals may be processed erroneously in which case they cannot be decoded by the AVR 4802 or may only produce noise Before playing DTS signals for the first time turn down the master volume to a low level start playing the DTS disc then check whether the DTS indicator on the AVR 4802 see page 46 lights before turning up the master volume X 3 A DVD player with DTS compatible digital output is required to play DTS DVDs A DTS Digital Output logo is featured on the front panel of compatible DVD players Recent DENON DVD player models feature DTS compatible digital output consult the player s owner s manual for information on configuring the digital output for DTS playback of DTS encoded DVDs Manufactured under license from Digital Theater Systems Inc US Pat No 5 451 942 5 956 674 5 974 380 5 978 762 and other world wide patents issued and pending DTS DTS ES Extended Surround and Neo 6 are trademarks of Digital Theater Systems Inc Copyright 1996 2000 Digital Theater Systems Inc All Rights Reserved 3 DTS ES Extended Surround DTS ES Extended Surround is a new multi channel digital signal format developed by Digital Theater Systems In
78. el meter at the listening position If a sound level meter is not available adjust the channels by ear so the sound levels are the same Because adjusting the subwoofer level test tone by ear is difficult use a well known music selection and adjust for natural balance NOTE When adjusting the level of an active subwoofer system you may also need to adjust the subwoofer s own volume control X When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode the channel level adjustments made will affect ALL surround modes Consider this mode a Master Channel Level adjustment mode X After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes Then whenever you activate a particular surround sound mode your preferred channel level adjustments for just that mode will be recalled Check the instructions for adjusting channel levels within each surround mode on Page 42 X You can adjust the channel levels for each of the following surround modes DIRECT STEREO 5CH 7CH STEREO DOLBY DTS SURROUND HOME THX CINEMA WIDE SCREEN SUPER STADIUM ROCK ARENA JAZZ CLUB CLASSIC CONCERT MONO MOMIE and MATRIX X When using either surround speakers A or B or when using surround speakers A and B at the same time be sure to adjust the balance of playback levels between each channel for the various selectio
79. elease your fingers from the 2 buttons 3 Check that the entire display is flashing with an interval of and the microprocessor will be initialized NOTES e f step 3 does not work start over from step 1 e f the microprocessor has been reset all the button settings are reset to the default values the values set upon shipment from the factory 200 0 0 0 ono Oo 2100000 ono Gp ON OFF This function eliminates the need to perform complicated resettings when the power is switched on The unit is also equipped with a back up memory This function provides approximately one week of memory storage when the main unit s TUNER DENON lt PRESET 113 Vv E E E E E Em oo This unit is equipped with a last function memory which stores the input and output setting conditions as they were immediately before the indication of the display is not normal or when the operation of the unit does not shows the reasonable result the initialization of the 59 15 TROUBLESHOOTING If a problem should arise first check the following 1 Are the connections correct 2 Have you operated the receiver according to the Operating Instructions 3 Are the speakers turntable and other components operating property If this unit is not operating properly check the items listed in the table below Shou
80. ens turn on the power of the this unit Connecting the audio components e When making connections also refer to the operating instructions of the other components OUTPUT INPUT CD recorder or Tape deck R L R L O L L Connecting a tape deck Connections for recording Connect the tape deck s recording input jacks LINE IN or REC to this unit s tape recording OUT jacks using pin plug cords Connections for playback Connect the tape deck s playback output jacks LINE OUT or PB to this unit s tape playback IN jacks using pin plug cords Connecting a CD player R Connect the CD player s analog Connecting the AC OUTLETS AC OUTLETS e SWITCHED total capacity 120 W 1 AJ output jacks ANALOG OUTPUT to this unit s CD jacks using pin plug cords Connecting the pre out jacks Use these jacks if you wish to connect external power amplifier s to increase the power of the front center surround and surround back sound channels or for connection to powered loudspeakers When using only one surround back speaker connect it to left channel L No power is supplied from these outlets when this unit s power is at standby Never connect equipment whose total capacity is above 120 W 1 A NOTE T Only use the AC OUTLETS for audio equipment Never use them for hair driers TVs or other electrical appliances The power
81. erformed if the music source cannot be played with the master volume set at 15 Set the front speakers to Small and the subwoofer to Yes in the speaker configuration When this is done the low frequencies are cut so the effect is insufficient VVe strongly recommend adding a subwoofer If the test tone is clipped when it is set to 18 dB set the peak limit to 18 dB In this case the input resistance of the subwoofer or front speakers is insufficient so clipping may occur when playing music We recommend switching to a subwoofer with a higher input resistance Setting the Digital In Assignment e This setting assigns the digital input jacks of the AVR 4802 for the different input sources 1 PUSH ENTER t At the System Setup Menu select Digital In Assignment System Setup Menu Speaker Configuration SB CH Auto Flag Detect y Delay Time Multi Zone Control Channel Level Subwoofer Peak Limit Lev GDigital In Assignment On Screen Display Auto Tuner Presets 2 saia Switch to the Digital In Assignment screen Digital In Assignment LCD COAX1 gt TAPE OPT5 DVD COAX2 VAUX OFF VDP COAX3 TV OPT1 DBS OPT2 VCR 1 OPT3 Def aul tlvesl VCR 2 OPT4 _McR 3 OFF J Select the digital input jack to be assigned to the input source e To select the input sourc
82. ess different AV components are connected or the speakers are repositioned After completing system setup 1 VIDEO SELECT SYSTEM SETUR PN DIMMER CURSOR TEST IPAGE R While the System Setup Menu screen is displayed on the TV screen press the CURSOR PAGE button on the remote control unit to cancel the highlighted display then press the system setup button X The changed settings are entered and the on screen display turns off This button can be pressed at any time during the system setup process to complete the process X Finally set the remote control unit RC 8000 display time setting to a time that is short but long enough that operation is possible On screen display signals Signals input to the AVR 4802 On screen display signal output VIDEO MONITOR OUT 1 video S video MONITOR OUT 1 video VIDEO signal input jack yellow S video signal input jack signal output jack yellow signal output jack 1 x x O O 2 O x O x 3 x O x O 4 O O x O O Signal x No signal O On screen signals output x On screen signals not output NOTES The on screen display signals are not output from the video signal MONITOR OUT 2 yellow or S Video signal MONITOR OUT 2 jacks The on screen display signals are not output from the color difference component video signal MONITOR OUT jacks e For 4 above the on screen display signals are
83. f this unit and the wall or other components 3 CAUTIONS ON HANDLING Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks If this happens either turn down the MASTER VOLUME control or connect components to the input jacks Muting of PRE OUT jacks and SPEAKER terminals The PRE OUT jacks and SPEAKER terminals include a muting circuit Because of this the output signals are greatly reduced for several seconds after the power switch is turned on or input function surround mode or any other set up is changed If the volume is turned up during this time the output will be very high after the muting circuit stops functioning Always wait until the muting circuit turns off before adjusting the volume 4 FEATURES 1 Dolby Pro Logic II decoder Digital Surround Sound Decoding Featuring dual 32 bit high speed DSP processors operating entirely in digital domain surround sound from digital sources such as DVD DTV and satellite are faithfully re created Dolby Digital Using advanced digital processing algorithms Dolby Digital provides up to 5 1 channels of wide range high fidelity surround sound Dolby Digital is the default digital audio delivery system for North American DVD and DTV and is available on laser discs as well as some digital satellite direct to home services DTS Digital Thea
84. for music sources recorded in stereo Signals consisting of the difference 7 MATRIX component of the input signals the component that provides the sense of expansion processed for delay are output from the surround channel 8 5CH 7CH STEREO The front left channel signals are output to the surround and surround back signal left channels the front right channel signals are output to the surround and surround back signal right channels and the in phase component of the left and right channels is output to the center channel Use this mode to enjoy stereo sound X Depending on the program source being played the effect may not be very noticeable In this case try other surround modes without worrying about their names to create a sound field suited to your tastes OTE 1 When playing sources recorded in monaural the sound will be one sided if signals are only input to one channel left or right so input signals to both channels If you have a source component with only one audio output monophonic camcorder etc obtain a Y adaptor cable to split the mono output to two outputs and connect to the L and R inputs Personal Memory Plus This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the input different sources When the input source is switched the modes set for that source last time it was used are automatically recalled X T
85. fter the last button was pressed and the setting will be completed X Stop pressing buttons once you have completed setting the surround parameters After several seconds the normal display reappears and the settings you have made are automatically set 50 Surround parameters 3 Pro Logic II Mode The Cinema mode is for use with stereo television shows and all programs encoded Dolby Surround The Music mode is recommended as the standard mode for autosound music systems no video and is optional for A V systems The Pro Logic Emulation mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality Select one of the modes Cinema Music or EML Panorama Control This mode extends the front stereo image to include the surround speakers for an exciting wraparound effect with side wall imaging Select OFF or ON Dimension Control This control gradually adjust the soundfield either towards the front or towards the rear The control can be set in 7 steps from 0 to 6 Center Width Control This control adjust the center image so it may be heard only from the center speaker only from the left right speakers as a phontom image or from all three front speakers to varying degrees The control can be set in 8 steps from O to 7 DTS Neo 6 mode Surround playback can be conducted for the analog input and
86. g ON orrainn This function only works with software on which a special identification signal is recorded This is a function for automatically playing in the 6 1 channel mode using the surround back speakers if the software is recorded in THX Surround EX or DTS ES or in the normal 5 1 channel mode without using the surround back speakers when the software is not recorded in THX Surround EX or DTS ES OFF arsed Set the OFF mode to perform 6 1 channel playback with conventional 5 1 channel sources or sources on which the identification signal described below is not recorded Non Flag Source SB ch Output setting THX surround EX DTS ES Playback is conducted using the surround back speaker Surround back channel is reproduced using digital matrix processing Non MTRX Playback is conducted using the surround back speaker The same signals as those of the surround channels are output from the surround back channel ORR ete Playback is conducted without using the surround back speaker NOTES e The SB CH Auto Flag Detect setting screen is displayed when the surround back speaker is set to Large or Small at Speaker Configuration e The surround back speakers can also be turned on and off using the SB CH OUT surround parameter See pages 55 Select the setting according to the program source to be played 22 Setting the delay time e Input the distance between the listening
87. gh precision input signal detection and matrix processing enable full band reproduction frequency response of 20 Hz to 20 kHz or greater for all 6 1 channels and separation between the different channels is improved to the same level as that of a digital discrete system DTS Neo 6 surround includes two modes for selecting the optimum decoding for the signal source e DTS Neo 6 Cinema This mode is optimum for playing movies Decoding is performed with emphasis on separation performance to achieve the same atmosphere with 2 channel sources as with 6 1 channel sources This mode is effective for playing sources recorded in conventional surround formats as well because the in phase component is assigned mainly to the center channel C and the reversed phase component to the surround SL SR and SB channels e DTS Neo 6 Music This mode is suited mainly for playing music The front channel FL and FR signals bypass the decoder and are played directly so there is no loss of sound quality and the effect of the surround signals output from the center C and surround SL SR and SB channels add a natural sense of expansion to the sound field 67 4 DTS 96 24 5 68 The sampling frequency number of bits and number of channels used for recording of music etc in studios has been increasing in recent years and there are a growing number of high quality signal sources including 96 kHz 24 bit 5 1 channel sources For example there ar
88. h time the button is pressed DOLBY PL II CINEMA DOLBY PL MUSIC S CINEMA EQ EN 4 blorr D COMP lt I gt 5 LFE 4 OdB gt TONE 4 AFDM lt 4 SB CH OUT NON MTRX gt Default Yes4 Y aa gg Be AB DOLBY PL EMAA DOLBY PL DOLBY PL IE EMULATION E DOLBY PL EDEIEMD OPT IONS4 CINEMA EQ EN 4 gt OFF D COMP lt B gt D COMP lt I gt LFE 4 OdB gt Lees LFE 4 OdB gt TONE 4 a TONE 4 AFDM E AFDM BE SB CH OUT OB SB CH OUT 4NON 4 488 4NON MTRX gt Default Default Yes lt Set the various surround parameters CINEMA EO setting DOLBY PL EVON CINEMA EQ E4 gt OFF D COMP 40D OdB gt PANORAMA DIMENSION CENTER WIDTH setting DOLBY PL II MU OPTIONAL PARAMETERS PANORAMA NI gt OFF DIMENT ON 43 gt CENTER WIDTH 40 DEFAULT setting DOLBY PL II MODE 4 CINEMA gt CINEMA EQ N EA D COMP 10 gt LFE 4 0dBb TONE 4 AFDM db SB CH OUT 4NON MTRX gt Default Yes NOTE e When making parameter settings the display will return to the regular condition several seconds a
89. he surround back channel for digital auto Flag Detect Mode ON Non Flag Source SBch Output THX Surround EX DTS ES Flag Detect signals This parameter is for optimizing the timing with which the audio Front L amp R Center Subwooter Surround L amp R SBL amp SBR Delay Time signals are produced from the speakers and subwoofer according to the listening position 12 ft 3 6 m 12 ft 3 6 m 12 ft 3 6 m 10 ft 3 0 m 10 ft 3 0 m Multi Zone 1 This sets the output level for the multi zone 1 Variable o Multi Zone vol Level output jacks Control Power AMP Set this to switch the surround back channel s Surround Back Assignment power amplifier for use for multi zone 2 This adjusts the volume of the signals output from the speakers and Front L Front R Center Surround Surround Surround Surround oi Woofer O E subwoofer for the different channels in order to obtain optimum Top L R Back L Back R effects 0 dB 0 dB 0dB 0 dB 0 dB 0 dB 0 dB 0dB This parameter is for detecting the maximum level of the low bass Subwoofer 4 a pre signals output from the subwoofer channel in order to protect the os o eak Limit R Peak Limitter OFF ey subwoofer from damage and prevent unpleasant distorted sounds from being produced oe i ER mr ep DVD VDP TV DBS SAT VCR 1 VCR 2 VCR 3 TAPE V AUX D Digital I
90. he surround parameters tone control settings and playback level balance for the different output channels are memorized for each surround mode 52 DSP surround simulation 1 Select the surround mode for the input channel The surround mode switches in the following order each time the DSP SIMULATION button is pressed gt gt WIDE SCREEN SUPER STADIUM ROCK ARENA X WIDE SCREEN is not displayed when the operation is performed with the buttons on the main unit DIRECT STEREO REA SURROUND MODE WIDE 5CH 7CH DSP DOLBY DTS SCREEN STEREO SIMULATION Main unit gt JAZZ CLUB CLASSIC CONCERT MATRIX MONO MOVIE CINAM DOLBY 2 4 HOME THX s eo q ells 22 amp E lt SURROUND 2 5 CURSO IPAGE m m o AVAMP DENON v PURE DIRECT DIRECT STEREO 5CH 7CH STERI R CH SELECT Remote control unit Display the surround parameter screen on the monitor X The screen for the selected surround mode appears SUPER STADIUM FROOM SIZE med i um EFFECT 15 gt D COMP MIDI TONE SB CH a 4 OUT 4 OFF Def ault Yes 3 PUSH ENTER t Press the CURSOR PAGE button to highlight the display then use the jog
91. i channel surround can be achieved using normal CD LD players X 1 Even with the high quality multi channel signals the recording time is the same as with conventional DTS surround sources What s more DTS 96 24 is fully compatible with the conventional DTS surround format so DTS 96 24 signal sources can be played with a sampling frequency of 48 kHz or 44 1 kHz on conventional DTS or DTS ES surround decoders x 2 X1 A DVD player with DTS digital output capabilities for CD LD players a player with digital outputs for conventional DTS CDs LDs and a disc recorded in DTS 96 24 are required X2 The resolution is 24 or 20 bits depending on the decoder Home THX Cinema Surround THX is an exclusive set of standards and technologies established by the world renowned film production company Lucasfilm Ltd THX grew from George Lucas personal desire to make your experience of the film soundtrack in both movie theaters and in your home theater as faithful as possible to what the director intended Movie soundtracks are mixed in special movie theaters called dubbing stages and are designed to be played back in movie theaters with similar equipment and conditions The soundtrack created for movie theaters is then transferred directly onto Laserdisc VHS tape DVD etc and is not changed for playback in a small home theater environment THX engineers developed patented technologies to accurately translate the sound from the movie theater env
92. ideo output jack VIDEO OUTPUT to E the VIDEO yellow TV DBS SAT IN jack using a 75 Q ohms video coaxial E pin plug cord e Connect the TV s or DBS SAT tuner s audio output jacks AUDIO OUTPUT to the AUDIO TV or DBS SAT IN jacks using pin plug cords E 1 E E DO voeo Connecting a Monitor TV E R L OUT LD player CDV player etc k MONITOR OUT 1 e Connect the TV s video input jack SE VIDEO INPUT to the VIDEO E U Connecting a video disc player VDP a MONITOR OUT jack using a 75 E E VDP le Q ohms video coaxial pin plug cord E Rg E The monitor TV can also be E E e Connect the video disc player s video output jack VIDEO OUTPUT to the E ain ah h E VIDEO yellow VDP IN jack using a 75 Q ohms video coaxial pin plug cord E TL ONE DU ae ve tng E e Connect the video disc player s analog audio output jacks ANALOG AUDIO E h h h Ee eee ote E OUTPUT to the AUDIO VDP IN jacks using pin plug cords E ER at tne 48025 om e A DVD player can be connected to the DVD jacks in the same way E FS Sp E aes 3 aay output E E e It is also possible to connect a video disc player DVD player video camcorder a rom this jack See page 31 m game machine etc to the V AUX jacks E 5 7 E 7 a 5 E E Pela Namal darned SE Ee SEBS SRR oo eee E E E DvD a m wy epa WO nese a aPC SYS a tt 7 E E ZN IN 1 QO COMPONENT no L E E PRE OUT Y PalCo PaCa Y Pelo Pan Y Pee P TT TT IN OO BRE REE Bee fru not E
93. in unit With the name of the volume to be adjusted selected turn the SELECT knob to adjust the level e To increase the bass or treble Turn the control clockwise The bass or treble sound can be increased to up to 12 dB in steps of 2 dB e To decrease the bass or treble Turn the control clockwise The bass or treble sound can be decreased up to 12 dB in steps of 2 dB 54 Surround parameters 4 EFFECT This parameter turns the effect signals with multi surround mode speaker effects on and off in the WIDE SCREEN mode When this parameter is turned off the SBL and SBR channel signals are equivalent to the SL and SR channels respectively LEVEL This parameter sets the strength of the effect signals in the WIDE SCREEN mode It can be set in 15 steps from 1 to 15 Set this toa low level if the positioning or phase of the surround signals sounds unnatural SB CH OUT 1 Dolby Digital DTS source MTRX ON Playback is conducted using the surround back speaker Surround back chnnel is reproduced using digital matrix processing NON MTRX Playback is conducted using the surround back speaker The same signals those of the surround channels are output from the surround back channels O aerated Playback is conducted without using the surround back speaker 2 Other source CON cristo Mente Playback is conducted using the surround back speaker POBRE cette tac Playbac
94. ing Connecting banana plugs counterclockwise clockwise Either tightly twist or terminate the core wires N Oe Turn clockwise to tighten then insert the banana plug Protector circuit e This unit is equipped with a high speed protection circuit The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short circuited and a large current flows when the temperature surrounding the unit becomes unusually high or when the unit is used at high output over a long period which results in an extreme temperature rise When the protection circuit is activated the speaker output is cut off and the power supply indicator LED flashes Should this occur please follow these steps be sure to switch off the power of this unit check whether there are any faults with the wiring of the speaker cables or input cables and wait for the unit to cool down if it is very hot Improve the ventilation condition around the unit and switch the power back on If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit switch off the power and contact a DENON service center Note on speaker impedance The protector circuit may be activated if the set is played for long periods of time at high volumes when speakers with an impedance lower than the specified impedance for example sp
95. ironment into the home correcting the tonal and spatial errors that occur On the AVR 4802 when the Home THX Cinema mode is on THX processing is automatically added after the Dolby Pro Logic Dolby Digital or DTS decoder Re Equalization The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home because film soundtracks are designed to be played back in large movie theaters using very different professional equipment Re Equalization restores the correct tonal balance for watching a movie soundtrack in a small home environment Timbre Matching The human ear changes our perception of a sound depending on the direction from which the sound is coming In a movie theater there is an array of surround speakers so that the surround information is all around you In a home theater only two speakers located to the side of your head are used The Timbre Matching feature filters the information going to the surround speakers so that they more closely match the tonal characteristics of the sound coming from the front speakers This ensures seamless panning between the front and surround speakers Adaptive Decorrelation In a movie theater a large number of surround speakers help create an enveloping surround sound experience while in a home theater there are usually only two speakers This can make the surround speakers sound like headphones that lack spaciousness and envelopment Th
96. is automatically set to Yes and when Subwoofer is set to No set to Large Selecting the surround speakers for the different surround modes mou Front is automatically e At this screen preset the surround speakers to be used in the different surround modes 1 PUSH ENTER t PUSH ENTER quim When either Large or Small has been set for both speakers A and B on the System Setup Menu when using both A and B surround speakers the surround speaker setting screen appears Select the surround speakers to be used in the different surround modes e To select the surround mode e To select the surround speaker A When using surround speakers A B When using surround speakers B A B When using both surround speakers A and B P EDOLBY DTS B SURROUND Surround Sp Setting gt A B THX THX5 1 B A B WIDE SCREEN B A B 5 7CH STEREO B A B DSP B A B SIMULATION EXT IN B A B N 2 PUSH ENTER Enter the setting e When Subwoofer is set to Yes or other speakers is set to Small the set switches to the Crossover Frequency mode e When Front is set to Large and Subwoofer is set to Yes the set switches to the subwoofer mode See page 21 X Speaker type setting when using both surround speakers A and B If Small is set for either surround speakers A or B the output is the same as when Small
97. k is conducted without using the surround back speaker ROOM SIZE This sets the size of the sound field There are five settings small med s medium small medium med medium large and large small recreates a small sound field large a large sound EFFECT LEVEL ield This sets the strength of the surround effect The level can be set in 15 s DELAY TIME eps from 1 to 15 Lower the level if the sound seems distorted In the matrix mode only the delay time can be set within the range of 0 to 300 ms TONE CONTROL This can be set individually or the separate surround modes other than Direct and Home THX Cinema 55 E Surround modes and parameters Signals and adjustability in the different modes Channel output Parameter default values are shown in parentheses When playing Dolby Digital and DTS signals Mode FRONT L R CENTER bi es aaa aaa D COMP LFE AFDM SB CH OUT PURE DIRECT DIRECT O x x x O OFF O 0dB x x STEREO O x x x O OFF O 0dB x x EXTERNAL INPUT O x x x x WIDE SCREEN O O OFF O 0dB x O HOME THX CINEMA Oo O OFF O 0dB Oo DOLBY PRO
98. l From the listening position listen to the test tones produced from the speakers to adjust the level The level can also be adjusted directly from the remote control unit For details see page 42 When using both surround speakers A and B their playback levels can be adjusted separately PUSH ENTER t Oj At the System Setup Menu select Channel Level cr RE Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control FChannel Level Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets y PUSH ENTER Switch to the Channel Level screen Channel Level STest Tone EE gt Manual Surr Sp EB A B Test Tone Start yes Level Clear Yes 4 No 3 PUSH ENTER Select Test Tone Mode Select the mode Select Auto or Manual a aaaa h Chane Tevel tees e Auto iFTest Tone EEB gt Mana Adjust the level while listening to the test tones produced automatically isca from the different speakers Surr Sp EB A B e Manual Select the speaker from which you want to produce the test tone to Test Tone Start Wel4 adjust the level Level Clear ves 4 a P Example When the Auto mode is selected I PUSH ENTER 6 PUSH ENTER Select Surr Sp then select the s
99. lby Surround but also regular stereo sources into five channels front left right center and surround left right In addition various parameters can be set according to the type of source and the contents so you can adjust the sound field with greater precision Wide screen mode for a 7 1 channel sound even with 5 1 channel sources DENON has developed a wide screen mode with a new design which recreates the effects of the multi surround speakers in movie theaters The result is 7 1 channel sound taking full advantage of surround back speakers even with Dolby Pro Logic or Dolby Digital DTS 5 1 channel signals 10 24 bit D A Conversion All eight channels including the seven main channels and the low frequency effects LFE channel benefit from reference ANALOG DEVICES DACs for optimum high fidelity reproduction of music and movie soundtracks e Whenever the AVR 4802 is in the STANDBY state the apparatus is still connected on AC line voltage Please be sure to unplug the cord when you leave home for say a vacation 11 Dual Surround Speaker Mode Provides for the first time the ability to optimize surround sound reproduction using two different types of surround sound speakers as well as two different surround speaker positions 1 Movie Surround Motion picture soundtracks use the surround channel s to provide the ambient elements of the acoustic environment they want the audience to realize This is best accomplished by
100. ld the problem persist there may be a malfunction Disconnect the power immediately and contact your store of purchase e Band O ends of battery inserted in reverse Symptom Cause Measures Page DISPLAY not lit and sound not produced Power cord not plugged in securely e Check the insertion of the power cord plug 6 when power switch set to on e Speaker cords not securely connected e Connect securely 12 13 e Input source selector button position is not e Switch to the proper position 33 appropriate e Volume control set to minimum e Turn volume up to suitable level 34 DISPLAY lit but sound not produced e MUTING is on e Switch off MUTING 35 e No digital signal is being input e Properly select a digital signal input source 29 e Speaker A or B button is set to OFF e Set the button for the connected speaker 19 terminals to ON e AVR 4802 s video output jacks and monitor s e Check that the connections are correct 7 9 input jacks are not properly connected e Monitor TV s input setting is wrong e Set the TV s input selector to the jacks to which 7 9 Nothing is displayed on monitor idee signals ale contiegied 9 pray e Connections of the various component s video Unify to composite or S jack 7 9 signals are not unified e VIDEO OFF mode is set e VIDEO ON mode is set 39 e PURE DIRECT mode is set Mode other than PURE DIRECT mode is set 39 e DVD player s audio ou
101. m O 10 x x x x MONO MOVIE O 0dB x x O Medium O 10 x x x x MATRIX O 0dB x x x x O 30msec x x x Note 1 BASS 6 dB TREBLE O dB O Adjustable Note 2 BASS 8 dB TREBLE 4 dB X Not adjustable E Differences in surround mode names depending on the input signals Input signals Surround Mode DTS DOLBY DIGITAL ANALOG LINEAR PCM DTS 5 1 ch DTS 96 24 5 1 ch DTS 6 1 ch D D 2 ch D D 5 1 ch PURE DIRECT DIRECT Oo Oo O O O O O STEREO O S O O O O O HOME THX CINEMA THX THX THX MTRX6 1 THX5 1 THX DSCRT6 1 THX XTHX SURROUND EX THX5 1 THX MTRX6 1 THX5 1 DTS SURROUND x x DTS ES MTRX DTS ES MTRX DTS ES DSCRT6 1 x x DTS SURROUND DTS 96 24 DTS MTRX6 1 DTS NEO 6 DTS NEO 6 DTS NEO 6 x x x DTS NEO 6 x DOLBY DIGITAL x x x x x x 6 1 SURROUND DOLBY DIGITAL DOLBY PRO LOGIC II DOLBY DOLBY x x x DOLBY x PRO LOGIC II PRO LOGIC I PRO LOGIC II DSP SIMULATION O O O O O O O O Selectable The surround mode name differs depending on the SB CH OUT surround parameter setting The surround mode name differs depending on the input signal x 56 Not selectable 12 LISTENING TO THE RADIO To operate the tuner by remote control switch the remote control device to TUNER 1 Set the input function to TUNER TUNER INPUT SELECTOR O Main unit Remote control unit ES CI Qu ES Do o Watching the display press the BAND button to select the a A aes Pe
102. n This assigns the digital input jacks for the different input Assignment sources Digital COAXIAL COAXIAL COAXIAL OPTICAL OPTICAL OPTICAL OPTICAL opp OPTICAL ofp Inputs 1 2 3 1 2 3 4 5 This sets whether or not to display the on screen display that On Screen appears on the monitor screen when the controls on the remote On Screen Display ON Display control unit or main unit are operated from MONITOR 1 outputs paro only Al A8 87 5 89 1 98 1 107 9 90 1 90 1 90 1 90 1 MHz B1 B8 520 600 1000 1400 1500 1710 kHz 90 1 90 1 MHz Auto Tuner FM stations are received automatically and stored in the memory C1 C8 90 1 MHz Presets D1 D8 90 1 MHz E1 E8 90 1 MHz 16 NOTES e The on screen display signals are not output from the MONITOR OUT 2 output jack or the color difference component video signal MONITOR OUT jacks e The on screen display signals are output with priority to the S VIDEO MONITOR OUT jack during playback of a video component For example if the TV monitor is connected to both the AVR 4802 s S Video and video monitor output jacks and signals are input to the AVR 4802 from a video source VDP etc connected to both the S Video and video input jacks the on screen display signals are output with priority to the S Video monitor output If you wish to output the signals to the video monitor output jack do not connect a cord to the S VIDEO MONITOR OUT jack For details see p
103. n using headphones Doooooo0o 009 Dooooo o oo Use this to turn off the audio output Mure 1 temporarily Press the MUTE button X Cancelling MUTING mode Press the MUTE button again Remote control unit 4 Combining the currently playing sound with the desired image AVAMP DENON SETTING 3 5 A v INPUT MODI M ZONE 1 ON OFF ANALOG SPEAKER EXT IN 1 VIDEO SELECT SYSTEM SETUP ON SCREEN E TEST TONE CURSOR IPAGE Use this switch to monitor a video source other than the audio source Press the VIDEO SELECT button until the desired image appears X Cancelling simulcast playback 1 Simulcast playback VIDEO SELECT Main unit Remote control unit e Select SOURCE using the video select button e Switch the program source to the component connected to the video input 5 Checking the currently playing program source etc A SETTING 3 5 M ZONE 1 ON OFF INPUT E ANALOG SPEAKER AVAMP DENON v ON EXTIN SCREEN APES DIMMER 1 3 SELECT o 5 SYSTEM SETUP TEST TONE CURSOR IPAGE Soe 1 1000 oo Do Oo um 1 2 1 2 1 On screen display e Each time an operation is performed a description of that operation appears on the display connected to the unit s VIDEO MONITOR OUT jack Also
104. ns of A or B and A and B 27 Subwoofer peak limit level setting This unit features a subwoofer peak limit control which prevents distortion and damage in the loudspeaker system by controlling the maximum bass volume level With this feature you may set the maximum bass level for the system This feature operates with or without a subwoofer in the system 1 PUSH ENTER t 5 At the System Setup Menu select Subwoofer Peak Limit Lev System Setup Menu Speaker Configuration SB CH Auto Flag Detect Delay Time Multi Zone Control Channel Level E Subwoofer Peak Limit Lev Digital In Assignment On Screen Display Auto Tuner Presets PUSH ENTER Switch to the Subwoofer Peak Limit Level Setting screen Subwoofer Peak Limit Level Setting Find The Level When Distortion Begins Peak Limiter on EH 3 PUSH ENTER eu Select ON for Peak Limiter 4 PUSH ENTER PUSH ENTER The screen switches Select Setting Start then select Yes The screen switches and a test noise is produced from the speaker system Subwoofer Peak Limit Level Setting Find The Level When Distortion Begins GPeak Limiter EM lt blor Setting Start Yes YT Increase the master volume level until the test noise is distorted The test noise bass sound is distorted when it sounds
105. o obtain from a direct radiating speaker monopolar Place these speakers at either side of the prime listening position mounted above ear level Path of the surround sound from the speakers to the listening position Surround speakers Surround back speakers As seen from above e Set the front speakers center speaker and subwoofer in the same positions as in example 1 Surround speaker Surround back e Itis best to place the surround speakers directly at the side or slightly speaker Point slightly o the front of the viewing position and 60 to 90 cm above the ears Front speaker IH SA downwards e Same as surround back speaker installation method 1 Using dipolar speakers for the surround back speakers as well is more effective e Connect the surround speakers to the surround speaker A jacks on he AVR 4802 and set all settings on the setup menu to A This is he factory default setting For details see page 16 e The signals from the surround channels reflect off the walls as shown on the diagram at the left creating an enveloping and realistic surround sound presentation For multi channel music sources however the use of bipolar or dipolar speakers mounted at the sides of the listening position may not be satisfactory in order to create a coherent 360 degree surround sound field Connect another pair of direct radiating speakers as described in example 3 and place them at he rear corners of th
106. odes The mode switches as shown below each time the INPUT MODE button is pressed AUTO gt PCM gt DTS INPUT MODE Main unit Remote control unit 1 3 2 lt AVAMP DENON SETTING 3 5 gt AVAMP DENON FUNQTION 1 5 AVAMP DENON lt suRRouND 25 gt vV OFF TUNER cD DVD o E m i g DBS SAT VCR 1 V AUX SCH 7CH STEREO VCR 2 VCR 3 o ed m 2 in o SYSTEM CURSOR TEST SETUP IPAGE TONE TAPE 1 TAPE 2 Input mode selection function Different input modes can be selected for the different input sources The selected input modes for the separate input sources are stored in the memory D AUTO All auto mode n this mode the types of signals being input to the digital and analog input jacks for the selected input source are detected and he program in the AVR 4802 s surround decoder is selected automatically upon playback This mode can be selected for all input sources other than PHONO and TUNER The presence or absence of digital signals is detected the signals input to the digital input jacks are identified and decoding and playback are performed automatically in DTS Dolby Digital or PCM 2 channel stereo format If no digital signal is being input he analog input jacks are selected Use this mode to play Dolby Digital signals PCM exclusive PCM signal playback mode Decoding and playback ar
107. ower is turned on NOTE e The DIGITAL indicator will light when playing CD ROMs containing data other than audio signals but no sound will be heard After starting playback 1 Adjusting the sound quality tone The tone switches as follows each time the TONE 1 TONE CONTROL button is pressed CONTROL BASS TREBLE i Main unit With the name of the volume to be SELECT adjusted selected turn the SELECT knob to adjust the level O Main unit e To increase the bass or treble Turn the control clockwise The bass or treble sound can be increased to up to 12 dB in steps of 2 dB e To decrease the bass or treble Turn the control clockwise The bass or treble sound can be decreased to up to 12 dB in steps of 2 dB 34 one control function will not work in the DIRECT PURE DIRECT and Home THX Cinema mode If you do not want the bass and treble to be TONE 3 adjusted turn on the tone defeat mode DEFEAT X The signals do not pass through the bass and treble adjustment circuits providing higher quality sound Main unit 2 Listening over headphones Plug the headphones plug into the jack X Connect the headphones to the PHONES jack The pre out output including the speaker output is automatically turned off when headphones are connected NOTE To prevent hearing loss do not raise the volume level excessively whe
108. pending on the speaker setting it to a different frequency may improve frequency response near the crossover frequency Setting the Subwoofer mode gt PUSH ENTER Crossover Frequency FIXED G THX FSubwoofer Mode THX Main WE 1 Select the subwoofer mode ai Enter the setting The System Setup Menu reappears NOTES Assignment of low frequency signal range e The only signals produced from the subwoofer channel are LFE signals during playback of Dolby Digital or DTS signals and the low frequency signal range of channels set to Small in the setup menu The low frequency signal range of channels set to Large are produced from those channels Subwoofer mode e The subwoofer mode setting is only valid when Large is set for the front speakers and Yes is set for the subwoofer in the Speaker Configuration settings see page 19 e When the LFE Main playback mode is selected the low frequency signal range of channels set to Large are produced simultaneously from those channels and the subwoofer channel In this playback mode the low frequency range expand more uniformly through the room but depending on the size and shape of the room interference may result in a decrease of the actual volume of the low frequency range e Selection of the LFE THX play mode will play the low frequency signal range of the channel selected with L
109. ppears on the on screen display AVAMP DENON lt l SETTING 3 5 Vv M ZONE 1 ON OFF INPUT E ANALOG SPEAKER Remote control unit ON SERIN SCREEN 1 EL DADE DIMMER SYSTEM CURSOR TEST ETUP IPAGE TONE q q ms ma So Tuner Preset Stations AIM 87 50MH A2FM 89 10MH A3FM 98 10MH A4FM107 90MH A5F 90 10MH AGRI 90 10MH ATA 90 10MH ABEL 90 10MHz 58 Recalling preset stations Watching the display press the MODE SELECT button until 1 Main unit TUNER PRESET appears on the set s display Remote control unit Watching the display press the SHIFT button to select the preset memory block TUNING PRESET SH IFT A Main unit Remote control unit Main unit Watching the display select the desired preset channel Remote control unit Watching the display press the PRESET UP or DOWN button to select the desired preset channel SELECT CHANNEL RN Main unit Remote control unit 13 LAST FUNCTION MEMORY INITIALIZATION OF THE MICROPROCESSOR When the power is switched off power switch is off and with the power cord disconnected microprocessor is reguired by the following procedure outlet 1 Switch off the unit and remove the AC cord from the wall at the same time plug in the AC cord 2 Press and hold the DIRECT buttons and STEREO buttons and about 1 second and r
110. r coaxial digital output Set the input mode to AUTO satellite broadcasts CATV etc same as for PCM Page 33 X 1 Please use a commercially available adapter when connecting the Dolby Digital RF AC 3RF output jack of the LD player to the digita input jack Please refer to the instruction manual of the adapter when making connection X 2 Some DVD digital outputs have the function of switching the Dolby Digital signal output method between bit stream and conver o PCM When playing in Dolby Digital surround on this unit switch the DVD player s output mode to bit stream In some cases players are equipped with both bit stream PCM and PCM only digital outputs In this case connect the bit stream PCM jacks to this unit 65 Dolby Pro Logic II e Dolby Pro Logic I is a new multi channel playback format developed by Dolby Laboratories using feedback logic steering technology and offering improvements over conventional Dolby Pro Logic circuits e Dolby Pro Logic II can be used to decode not only sources recorded in Dolby Surround X but also regular stereo sources into five channels front left front right center surround left and surround right to achieve surround sound e Whereas with conventional Dolby Pro Logic the surround channel playback frequency band was limited Dolby Pro Logic II offers a wider band range 20 Hz to 20 kHz or greater In addition the surround channels were
111. r to the devices operating instructions MULTI ROOM MUSIC ENTERTAINMENT SYSTEM 1 When using a separately sold RC 8001ST charger base station When the MULTI ZONE terminal output is set to Variable The AVR 4802 is equipped with audio pre out terminals for which the volume is adjustable M ZONE 1 A separately sold stereo power amplifier POA T10 can be connected to enjoy multi zone playback Also refer to the operating instructions of the RC 8001ST AVAMP DENON lt m zone1 45 gt TN VOLUME VOLUME DOWN UP ANOTHER ROOM MAIN ROOM To AVR 4802 T Is Jz VCR 2 I E Z Gi TAPE 1 TAPE 2 RC 8000 RC 8001ST When connected as shown on the diagram below using connection cords included with Denon power amplifiers the power amplifier s power can be turned on and off using the M ZONE 1 ON OFF button on the remote control unit Y AVAMP DENONI lt SETTING 35 gt INPUT M ZONE 1 MODE ON OFF REMOTE Dm w y AUK VORA vene VCRS Vera we 10 660000000000 ANALOG SPEAKER OO or 6 6666066666630 n 6000009000000 To ON EXT IN SCREEN VIDEO SELECT SYSTEM CURSOR TEST SETUP PAGE TONE OOOO 0000DDDD Em
112. ree Wodrea D COMP LFE AFDM SB CH OUT PURE DIRECT DIRECT O x x x O OFF O 0dB x x STEREO O x x x O OFF O 0dB x x EXTERNAL INPUT Oo x x x x WIDE SCREEN O O OFF O 0dB x Oo HOME THX CINEMA O O OFF O 0dB O e DOLBY PRO LOGIC II G O OFF O 0dB O Oo DOLBY DIGITAL O O OFF O 0dB O Oo DTS SURROUND Oo O OFF O 0dB O O DTS NEO 6 O O OFF O 0dB O O 5 7CH STEREO O O OFF O 0dB x Oo SUPER STADIUM O O OFF O 0dB x O ROCK ARENA O O OFF O 0dB x O JAZZ CLUB O O OFF O 0dB x O CLASSIC CONCERT O O OFF O 0dB x O MONO MOVIE O O OFF O 0dB x O MATRIX O O OFF O 0dB x O O Signal Adjustable O Able x No signal Not adjustable x Unable Turned on or off by speaker configuration setting Signals and adjustability in the different modes Parameter default values are shown in parentheses SURROUND PARAMETER PRO LOGIC II MUSIC MODE ONLY Nowe odio TREY wove OOM TET SEY porn omenson Sint PURE DIRECT DIRECT x x x x x x x x x STEREO O 0dB x x x x x x EXTERNAL INPUT O 0dB x x x x x x x x WIDE SCREEN O 0dB O OFF x x O ON 10 x x x x HOME THX CINEMA x x x x x x x x x DOLBY PRO LOGIC II O 0dB O OFF O CINEMA x x x O OFF O 3 O 0 DOLBY DIGITAL O 0dB O OFF x x x x x x x DTS SURROUND O 0dB O OFF x x x x D
113. s connected disconnect the ground wire MD recorder DAT deck or other component equipped with digital input output jacks e e OUTPUT INPUT OPTICAL with digital output jacks Connecting the DIGITAL jacks Use these for connections to audio equipment with digital output Refer to page 29 for instructions on setting this terminal CD player or other component equipped NOTES e Use 75 Q ohms cable pin cords for coaxial connections e Use optical cables for optical connections removing the cap before connecting Connecting video components e To connect the video signal connect using a 75 Q ohms video signal cable cord Using an improper cable can result in a drop in picture quality e When making connections also refer to the operating instructions of the other components TV or DBS SAT tuner AUDIO viDEO RL OUT RJ E Connecting a TV DBS SAT tuner E Monitor TV E TV or DBS SAT and e Connect the TV s or DBS SAT tuner s v
114. s made at Speaker Configuration in the System Setup Menu 35 Multi source recording playback With the exception of the case in 2 below only the signal connected to the analog input jacks are output from the REC OUT and multi room output jacks 1 Playing one source while recording another REC OUT mode Press the REC MULTI button until REC PS CULT OUT SOURCE appears on the set s display Main unit Select the source you want to record SELECT appears on the set s display e The indicator for the selected program source lights Main unit Set the recording mode e For operating instructions refer to the manual of the component on which you want to record 4 To cancel press the REC MULTI button REC MULTI and select SOURCE Main unit 2 Recording Dolby Digital and DTS multichannel sources e With this set it is possible to record Dolby Digital and DTS multichannel signals converted into 2 channel analog signals e The recording signals are output to the MULTI ZONE OUT TAPE and VCR output terminals Press the REC MULTI button until REC SEG OUT SOURCE appears on the display Main unit Set the input mode according to the A source to be played Suing Main unit Set the surround mode by pressing the DIRECT or STEREO 3 button e The multichannel digital signals are down mixed and output to the TAPE and VCR output terminals DIRECT STEREO or R
115. ss right over the listener s head This system was developed jointly by Lucasfilm THX and Dolby Laboratories fusing Lucasfilm s idea of improving spatial expression and achieving a uniform 360 degree sound positioning with Dolby Laboratories matrix encoding technology Emphasis was placed on compatibility with the existing system Dolby Digital 5 1 channel and the new surround back SB channel was added to achieve improvements over the conventional 5 1 channel system in terms of the positioning of the sound at the rear the acoustic image of sound moving from the two sides to the back as well as sound moving from the front to the center rear with the multi surround speaker systems used in movie theaters thereby enabling various types of surround sound The surround back channel signal is a matrix encoded signal inserted into both the Dolby Digital SL surround left and SR surround right channels Upon playback the signals are decoded by a high precision digital matrix decoder within the Dolby Digital decoder into the SL SR and SB channels and output as 6 1 channels of signals With the AVR 4802 the signals further undergo Home THX Cinema processing to achieve a THX Surround EX system Even without the proper environment for playing the SB channel Dolby Digital Surround EX signals are 100 compatible with existing 5 1 channel playback systems so they can be played as such In this case the SB channel signal is produced as a monaural signal from bo
116. stallation sur une tag re e Handle the power cord carefully Hold the plug when unplugging the cord e Manipuler le cordon d alimentation avec pr caution Tenir la prise lors du d branchement du cordon pe a e Unplug the power cord when not using the set for long periods of time e D brancher le cordon d alimentation lorsque l appareil n est pas utilis pendant de longues p riodes e Do not let insecticides benzene and thinner come in contact with the set e Ne pas mettre en contact des insecticides du benz ne et un diluant avec l appareil For sets with ventilation holes e Do not obstruct the ventilation holes e Ne pas obstruer les trous d a ration e Never disassemble or modify the set in any way e Ne jamais d monter ou modifier l appareil d une mani re ou d une autre 6A 10 11 SAFETY INSTRUCTIONS Read Instructions All the safety and operating 12 instructions should be read before the appliance is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the appliance and in the 14 operating instructions should be adhered to Follow Instructions All operating and use instructions 15 should be followed Water and Moisture The appliance should not be used 16 near water for example near a bathtub washbowl kitchen sink laundr
117. stick to set the parameters PUSH ENTER quim Remote control unit lt l SURROUND 2 HOME THX CINAMA Remote control unit Press the CURSOR PAGE button so that the display is no longer highlighted then press the SURR PARA button to complete the setting DSP SIMU AVAMP DENON gt PURE DIRECT STEREO 5CH TCH STEREO SURR CURSOR CH PARA IPAGE SELECT IT 15 NOTES e When Default is selected and the jog stick is moved to the left CINEMA EQ and D COMP are automatically set to OFF addition ROOM SIZE is set to medium EFFECT LEVEL to 10 and DELAY TIME to 30ms e The ROOM SIZE expresses the expansion effect for the different surround modes in terms of the size of the sound field not the actual size of the listening room In 53 Tone control setting e Use the tone control setting to adjust the bass and treble as desired 1 Remote control unit Display the surround parameter screen on the monitor X The screen for the selected surround mode appears TONE cannot be selected in the Direct or Home THX Cinema mode TI DS Oo o Be N SUPER STADIUM FROOM SIZE med i um EFFECT415 D COMP lt MID TONE 4 SB CH OUT E 4 plore Default Yes A
118. t is selected 4 Once Meter or Feet is selected in Step 3 the Delay Time screen appears automatically Delay Time D Default Yes 4 De ecrront L 4 Front R Center Subwoofer be g we MMMP Oh p U a R Delay Time o amm ESL a og Na i ny pO BE At the System Setup Menu select Delay Time PUSH ENTER 23 6 ee Set the distance between the Dean time center speaker and listening position Default Yes 4 The distance changes in units of 1 m foot 0 1 meters each time the Nee Front L 12ft button is pressed Select the value a eee as o closest to the measured distance 8 OB ae TA AABB a u A Example When the distance is set to 12 feet for the center speaker X If Yes is selected for Default the settings are automatically reset to the default values Please note that the difference of distance for every speaker should be 15 ft 4 5 m or less If you set an invalid distance a CAUTION notice such as screen right will appear In this case please relocate the blinking speaker s so that its distance is no larger than the value shown in highlighted line Delay Time ft cam PSL A 410ft gt SEG SRA 10ft Qa SL B 10ft SR B 10ft O A SBL 10ft 445 Bj SBR 10ft RELO
119. te control unit 42 Fader function e This function makes it possible to lower the volume of the front channels FL C and FR or the rear channels SL SR SBL and SBR together Use it for example to adjust the balance of the sound from the different positions when playing multi channel music sources Press the CH VOL button and select FADER 1 MAIN UNIT REMOTE CONTROL UNIT Select FADER CH VOL Main unit Remote control unit The channel switches in the order shown below each time this button is pressed FL gt C gt FR gt SR gt SBR SW je FADER A MAIN UNIT 2 Turn the SELECT knob clockwise to adjust the volume of the surround side collectively Turn the CONTROL knob counterclockwise to adjust the volume of the front side collectively REMOTE CONTROL UNIT Press the CURSOR PAGE button on the SURROUND 2 5 page to highlight the display The channel speaker switches as shown on the diagram below each time it is pressed REMOTE CONTROL UNIT Move jog stick ENTER to the top side to adjust the volume of the surround side collectively Move jog stick ENTER to the bottom side to adjust the volume of the front side collectively SELECT A Main unit CURSOR IPAGER Remote control unit PUSH ENTER t Remote control unit
120. ter Systems DTS provides up to 5 1 channels of wide range high fidelity surround sound from sources such as laser disc DVD and specially encoded music discs Lucasfilm Home THX Ultra Certified Home THX is the unique collaboration between Lucasfilm Ltd and audio equipment manufacturers THX Ultra certification is the highest performance level and provides a rigorous set of performance standards along with proprietary surround sound post processing technologies designed to enhance the surround soundtrack playback experience in the home theater THX Surround EX The AVR 4802 is fully compatible with THX Surround EX the latest surround format DTS ES Extended Surround and DTS Neo 6 The AVR 4802 is compatible with DTS ES Extended Surround a new multi channel format developed by Digital Theater Systems Inc The AVR 4802 is also compatible with DTS Neo 6 a surround mode allowing 6 1 channel playback of regular stereo sources DTS 96 24 compatibility The AVR 4802 is compatible with sources recorded in DTS 96 24 a new multi channel digital signal format developed by Digital Theater Systems Inc DTS 96 24 sources can be played in the multi channel mode on the AVR 4802 with high sound quality of 96 kHz 24 bits or 88 2 kHz 24 bits Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over conventional Dolby Pro Logic It can be used to decode not only sources recorded in Do
121. ter completing the adjustment press the CURSOR PAGE 1 CURSOR v gt O m e After adjusting using the test tones make the desired settings for each surround mode to be played then use the procedure described below to adjust the levels of the various channels MAIN UNIT 5 Press the CH VOL button and select Shes CH VOL Main unit REMOTE CONTROL UNIT Press the CH SELECT button on the SURROUND 2 5 page CH VOL is selected Remote control unit The setting mode switches in the following order each time the button is pressed AVAMP DENON JF FR I SR I SBR gt SBL a Ra gt HOME THX PURE CINAMA DIRECT FADER SWJ SLs ear E MAIN UNIT ey stereo Turn the SELECT knob to adjust the EE E level of the selected speaker O SURR CURSOR PARA IPAGE Main unit REMOTE CONTROL UNIT Press the CURSOR PAGE button on the SURROUND 2 5 page to highlight the display The channel speaker switches as shown on the diagram below each time it is pressed Remote control unit REMOTE CONTROL UNIT Ae o t Xx When the surround back speaker setting is set to 1spkr for Move jog stick ENTER back and forth Speaker Configuration this is set to SB to adjust the level of the selected speaker E Remo
122. th the SL and SR channels so none of the signal components are missing The effects specific to THX Surround EX the sense of spatial expression and the positioning of the sound however are the same as with conventional 5 1 channel surround systems OLucasfilm Ltd amp TM All Rights Reserved Surround EX is a jointly developed technology of THX and Dolby Laboratories and is a trademark of Dolby Laboratories Used under authorization System setup items and default values set upon shipment from the factory System setup Default settings Input the combination of speakers in your system and their Speaker corresponding sizes SMALL for regular speakers LARGE for full Front SP Center Sp pubwooter Surround Sp Surround Sp Back Configuration size full range to automatically set the composition of the signals output from the speakers and the frequency response Small Small Yes Small Small 2spkrs Use this function when using multiple surround speaker g d DOLBY combinations for more ideal surround sound Once the Nae DTS ages WIDE ACR DSP EXT IN Surround ere mode SURROUND THX 5 1 SCREEN STEREO SIMULATION S combinations of surround speakers to be used for the peaker E Setting different surround modes are preset the surround Sele speakers
123. the maximum sound level is lower than usual the Dynamic Range Compression allows you to hear all of the sounds in the soundtrack but with reduced dynamic range This only works when playing program sources recorded in Dolby Digital or DTS Select one of the four parameters OFF LOW MID middle or HI high Set to OFF for normal listening This parameter is displayed only when playing compatible sources in DTS mode LFE Low frequency Effect This sets the level of the LFE Low Frequency Effect sounds included in the source when playing program sources recorded in Dolby Digital or DTS If the sound produced from the subwoofer sounds distorted due to the LFE signals when playing Dolby Digital or DTS sources when the peak limiter is turned off with the subwoofer peak limit level setting system setup menu adjust the level as necessary Program source and adjustment range 1 Dolby Digital 10 dB to 0 dB 2 DTS Surround 10 db to 0 dB When DTS encoded movie software is played it is recommended that the LFE LEVEL be set to 0 dB for correct DTS playback X When DTS encoded music software is played it is recommended that the LFE LEVEL be set to 10 dB for correct DTS playback TONE This adjusts the tone control See Surround parameters on page 55 E Dialogue Normalization The dialogue normalization function is activated automatically when playing Dolby Digital program sources Dialog
124. the unit s operating status can be checked during playback by pressing the remote control unit s ON SCREEN button Such ON e SCREEN ry Remote control unit nformation as the position of the input selector and the surround parameter settings is output in sequence Front panel display e Descriptions of the unit s operations are also displayed on the front panel display In addition the display can be switched to check the unit s opera by pressing the STATUS button Using the dimmer function e Use this to change the brightness of the display The display brightness changes in four steps bright medium dim and off by pressing the DIMMER button repeatedly X The brightness changes in 3 steps each time the button is pressed and finally the display turns off DIMMER Main unit STATUS ing status while playing a source Main unit Remote control unit 6 Switching the surround speakers lt l SETTING INPUT MODE ANALOG EXT IN EL lee SYSTEM CURSOR SETUP IPAGE AVAMP DENON 3 5 vV M ZONE 1 ON OFF SPEAKER ON SCREEN DIMMER TEST TONE shown below each time the SPEAKER 1 The surround speakers switch as button is pressed m SURROUND A SURROUND B SURROUND A B SPEAKER Remote control unit X This operation is possible when the setting for using both surround speakers A and B i
125. ther devices emitting pulse type noise nearby may devices as possible esult in malfunction so keep the set as far away from such 31 9 OPERATION Before operating AVAMP DENONI lt FUNCTION 1 5 Refer to CONNECTIONS pages 6 to 13 and check that all connections are correct To operate with the remote control unit set the remote control unit s screen to the AVAMP 1 5 page 3 Turn on the power Press the POWER operation switch button ON STANDBY ndo 5 O Lights MR ON STANDBY Main unit Remote control unit e When pressed the power turns on and the display lights The sound is muted for several seconds after which the unit operates normally When pressed again the power turns off the standby mode is set and the display turns off Whenever the ON STANDBY button is in the STANDBY state the apparatus is still connected to the AC line voltage Please be sure to unplug the cord when you leave home for say a vacation 32 Operating the remote control unit e For details refer to the separate supplied RC 8000 operating instructions 1 m ither lightly press on the remote control unit s touch panel or press the LIGHT button to turn on the liquid crystal display Remote control unit s jog stick Lightly press ENTER to display the icons PUSH ENTER u m Press the
126. this apparatus FEEDER CABLE 75 Q ohms COAXIAL CABLE FM INDOOR ANTENNA Supplied 300 Q ohms AM loop antenna assembly Connect to the AM antenna terminals Remove the vinyl tie and take out the Bend in the reverse connection line direction a With the antenna on top any stable surface b With the antenna attached to a wall Installation hole Mount on wall etc 10 AM LOOP ANTENNA Supplied oo TS f y FRONT f A p BANS ANTENNA AM OUTDOOR ANTENNA GROUND Connection of AM antennas 1 Loosen by turning 2 Insert the 3 Tighten by turning counterclockwise cord clockwise o o o Note to CATV system installer This reminder is provided to call the CATV system installer s attention to Article 820 40 of the NEC which provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical Notes e Do not connect two FM antennas simultaneously e Even if an external AM antenna is used do not disconnect the AM loop antenna e Make sure AM loop antenna lead terminals do not touch metal parts of the panel Connecting the external input EXT IN jacks e These jacks
127. to protect the 2 Peak Limit Peak Limitter OFF Lev subwoofer from damage and prevent unpleasant distorted sounds from being produced an A RE 3 R gt or cD DVD VDP TV DBS SAT VCR 1 VCR 2 VCR 3 TAPE V AUX D Digital In This assigns the digital input jacks for the different input Assignment sources Digital COAXIAL COAXIAL COAXIAL OPTICAL OPTICAL OPTICAL OPTICAL opp OPTICAL oe Inputs 1 2 3 1 2 3 4 5 sg This sets whether or not to display the on screen display that On Screen appears on the monitor screen when the controls on the remote On Screen Display ON Display control unit or main unit are operated from MONITOR 1 outputs pay only A1 A8 87 5 89 1 98 1 107 9 90 1 90 1 90 1 90 1 MHz B1 B8 520 600 1000 1400 1500 1710 kHz 90 1 90 1 MHz Auto Tuner FM stations are received automatically and stored in the memory C1 C8 90 1 MHz Presets D1 D8 90 1 MHz E1 E8 90 1 MHz 69 70 Surround modes and parameters Signals and adjustability in the different modes Channel output Parameter default values are shown in parentheses When playing Dolby Digital and DTS signals Mode FRONT L R CENTER Pee
128. tput setting is not set to bit Make the DVD player s initial settings No dts sound is produced stream P i e DVD player is not dts compatible e Use a dts compatible player ms e AVR 4802 s input setting is set to analog e Set to AUTO or dts 33 Copying from DVD to VCR is not e Mode video software contains copy prohibit e Copying is not possible possible signals e Subwoofer s power is not on e Turn on the power No sound is produced from subwoofer e Subwoofer s initial setting is set to NO e Set the setting to YES 19 e Subwoofer s output is not connected e Connect properly 13 e Surround mode is set to a mode other than Set to Dolby Surround No test tones are produced Dolby Surround No sound is produced from surround Surround mode is set to STEREO e Set to a mode other than STEREO speakers Battei s dead d PeR K with new batteries 31 e Remote control unit too far from this unit eR Pao aa 31 This unit does not operate properly when Obstacle between this unit and remote control emove OPSLAG g 31 remote control unit is used unit ep th butt e Different button is being pressed eso UNG PIO pe seal a e Insert batteries properly 31 60 ADDITIONAL INFORMATION Optimum surround sound for different sources There are currently various types of multi channel signals signals or formats with more than two channels E Types of multi channel signals Dolby Digital
129. tting this mode sometimes results in amore natural sound Select the mode as desired Dolby Digital WIDE SCREEN Of 5 1 ch sources e Effective for 2 channel sources recorded in Dolby Surround or DTS Surround for 7 1 channel playback with 5 1 channel sources 2 ch sources recorded in Dolby Surround HOME THX CINEMA e This mode is optimized for playing 5 1 channel movies e For sources recorded in Dolby Surround as well this mode provides the same power as with 5 1 channel sources DOLBY DIGITAL DTS SURROUND DTS 96 24 e This mode is optimized for playing 5 1 channel music e For Dolby surround recording sources Dolby Pro Logic II playback is conducted PURE DIRECT e By suspending all the video circuits analog input music playback can be played with optimum quality The video outputs do not operate Sources recorded in stereo Sources recorded in monaural DIRECT STEREO e Effective for achieving pure playback e If there is no need for tone control or distribution of the low frequencies in function of the speaker configuration select the DIRECT mode to achieve the best sound quality DENON Original Surround Modes see page 52 e Select these for 7 1 channel playback with sources recorded in stereo or monaural e The effects are different for each of the surround modes Select the one most suited for the source being used
130. ue normalization is a basic function of Dolby Digital which automatically normalizes the dialog level standard level of the signals which are recorded at different levels for different program sources such as DVD DTV and other future formats that will use Dolby Digital When this function is activated the following message appears on the main unit s display The number indicates the normalization level when the currently playing program is normalized to the standard level 48 Dolby Surround Pro Logic II mode 1 is connected EX INPUT SELECTOR O Main unit Select the function to which the component you want to play Remote control unit Select the DOLBY PRO LOGIC II mode using the SELECT buttons Select the Dolby Surround Pro Logic I mode The surround mode switches when the SURROUND MODE button is pressed Select the DOLBY PRO LOGIC II lt FUNCTION 15 gt AVAMP DENON AVAMP DENON lt SURROUND25 gt mode DOLBY DTS 5CH 7CH is STEREO z IPAGE SELECT Main unit Remote control unit 5 e The Dolby Pro Logic indicator lights Light wi vA DOPRO LOGIC as AUTO Input DVD Mode DOLBY PL II CINEMA P 3 Play a program source with the NJ Doiey surrouno mark e For operating instructions refer to the manuals of the respecti
131. und track playback offers the same intricate grand sound as in a movie theater right in your own listening room DTS compatible media and playback methods DIGITAL Marks indicating DTS compatibility dts and ES SURROUND The following are general examples Also refer to the player s operating instructions Media DTS Digital output jacks Playback method reference page cD Optical or coaxial digital output Set the input mode to AUTO or DTS page 33 same as for PCM X 2 Never set the mode to ANALOG or PCM X1 LD VDP Optical or coaxial digital output Set the input mode to AUTO or DTS page 33 same as for PCM X2 Never set the mode to ANALOG or PCM X1 DVD re GI ghala ig tal ontpit Set the input mode to AUTO or DTS page 33 X 1 DTS signals are recorded in the same way on CDs and LDs as PCM signals Because of this the un decoded DTS signals are output as random hissy noise from the CD or LD player s analog outputs If this noise is played with the amplifier set at a very high volume it may possibly cause damage to the speakers To avoid this be sure to switch the input mode to AUTO or DTS before playing CDs or LDs recorded in DTS Also never switch the input mode to ANALOG or PCM during playback The same holds true when playing CDs or LDs on a DVD player or LD DVD compatible player For DVDs the DTS signals are r
132. urround speaker s from which you want to produce the tes ENS tone A B or A B e Surr Sp A Adjusts the balance of the playback level between the channels when using surround speake A e Surr Sp B Adjusts the balance of the playback level between the channels when using surround speake B e Surr Sp A B Adjusts the balance of the playback level between the channels when using surround speakers A and B at the same time X The Surr Sp can only be selected when both surround speakers A and B have been selected at the Speaker Configuration when both A and B have been set to Large or Small Select Test Tone Start 26 PUSH ENTER Select Yes Channel Level Test Tone Surr Sp Test Tone Start Yes 4 EB Mama EB A B L Level Clear Yes 4 J a If the Auto mode is selected N nais t Test tones are automatically emitted from the different speakers Test Tone Auto O The test tones are emitted from the different speakers in the SW ch 128 m following order at 4 second intervals the first time and second time A TD FL C FR SR SBRSBL SL SW y around 2 second intervals the third time around and on QE Gy trees enem x E 1spkr pe 0 0 0 aay f i FL H FR SR SBR SB SL Sw Flashing E 88 8 PPP Pe Pa 2spkrs K y PUSH ENTER 4m PUSH ENTER
133. ve components Select the surround parameter mode 4 S DOLBY PL 11 E MODE 4 CINEMA CINEMA CINEMA EQ MUSIC EN lt gt OFF w5 D COMP lt gt arg LFE 4 0d a TONE 4 AFDM lb ioe ds A O D SB CH OUT Main unit Remote control unit 4488 NON MTRX gt Default Yes 5 Select the optimum mode for the source CINEMA PUSH ENTER MUSIC IPAGER gt Main unit Remote control unit DOLBY PL II CINEMA DOLBY PL II MUSIC DOLBY PL II EMULATION A my VETA DOLBY PL EMDEEININAD DOLBY PL EMPENISAE DOLBY PL EXTEIEVSE CINEMA EQ OPT IONS4 CINEMA EQ NI lt gt OFF EMI gt OFF SEO D COMP MD SEO D COMP 410D ED D COMP HD LFE 4 OdBp LFE 4 OdB gt T LFE 4 0d Q TONE 4 eo TONE 4 eo TONE 4 AFDM lt 40 AFDM lt 40 AFDM lt 40 m o D SB CH OUT 6 OB SB CH OUT M oO SB CH OUT a8 8 NON MTRX gt AABB NON MTRX gt 1888 NON MTRX gt Default Yes k Default Yesa q Default Yesa 49 6 Set the surround parameters according to the mode SURROUND PARAMETER Main unit Remote control unit e The mode switches as shown below eac
134. video input jack VIDEO IN to the VIDEO VCR 1 IN jacks and the video deck s audio input jacks AUDIO IN to the AUDIO VCR 1 he same way Connecting a video component equipped with S Video jacks e When making connections also refer to the operating instructions of the other components Anote on the S input jacks The input selectors for the S inputs and pin jack inputs work in conjunction with each other e Precaution when using S jacks This unit s S jacks input and output and video pin jacks input and output have independent circuit structures so that video signals input from the S jacks are only output from the S jack outputs and video signals input from the pin jacks are only output from the pin jack outputs When connecting this unit with equipment that is equipped with S jacks keep the above point in mind and make connections according to the equipment s instruction manuals Connecting a video disc player VDP VDP e Connect the video disc player s S Video output jack to the S VIDEO VDP IN jack using an S Video connection cord e A DVD player can be connected to the DVD jacks in the same way e It is also possible to connect a video disc player DVD player video camcorder game machine etc to the V AUX jacks LD player CDV player etc TV or satellite broadcast tuner Gu Connecting a TV DBS SAT tuner
135. w you to watch one source visual while listening to another source audio 14 Seven Identical Power Amplifiers Featuring discrete high current power transistors the power amp section is THX Ultra certified for top performance with the widest range of speaker systems Rated at 125 watts into 8 Q ohms the amp channels feature additional low impedance drive capability 15 Future Sound Format Upgrade Capability via Eight Channel Inputs amp Outputs For future multi channel audio format s the AVR 4802 is provided with 7 1 channel seven main channels plus one low frequency effects channel inputs along with a full set of 7 1 channel pre amp outputs controlled by the 8 channel master volume control This assures future upgrade possibilities for any future multi channel sound format 5 CONNECTIONS e Do not plug in the AC cord until all connections have been completed e Be sure to connect the left and right channels properly left with left right with right e Insert the plugs securely Incomplete connections will result in the generation of noise e Use the AC OUTLETS for audio equipment only Do not use them for hair driers etc e Note that binding pin plug cords together with AC cords or placing them near a power transformer will result in generating hum or other noise e Noise or humming may be generated if a connected audio equipment is used independently without turning the power of this unit on If this happ
136. x 2 ch 2 Q ohms Front Center Surround Back 6 16 Q ohms Surround AorB 6 16 Q ohms A B 8 16 Q ohms 200 mV 47 kQ kohms 10 Hz 100 kHz 0 3 dB DIRECT mode 105 dB DIRECT mode 0 005 20 Hz 20 kHz DIRECT mode 1 2V Rated output 2 V at O dB playback Total harmonic distortion 0 005 1 kHz at 0 dB S N ratio 110 dB Dynamic range 108 dB Format Digital audio interface 2 5 mV 1 dB 20 Hz to 20 kHz 74 dB A weighting with 5 mV input 150 mV 8V 0 03 1 kHz 3 V 1 Vp p 75 Q ohms 5 Hz 10 MHz 0 3 dB Y brightness signal 1 Vp p 75 Q ohms C color signal 0 286 Vp p 75 Q ohms 5 Hz 10 MHz 0 3 dB Y brightness signal 1 Vp p 75 Q ohms PB CB blue signal 0 7 Vp p 75 Q ohms PR CR red signal 0 7Vp p 75 Q ohms DC 50 MHz 0 3 dB FM note uV at 75 Q ohms O dBf 1 x 10715 W AM 87 5 MHz 107 9 MHz 520 kHz 1710 kHz 1 0 uV 11 2 dBf 18 pV MONO 1 6 uV 15 3 dBf STEREO 23 uV 38 5 dBf MONO 79 dB 50 dB STEREO 74dB MONO 0 15 STEREO 0 3 AC 120 V 60 Hz 10 5 A 434 W x 179 H x 485 D mm 17 3 32 x 7 3 64 x 19 3 32 20 5 kg 45 Ibs 3 1 oz LR6 AA Type four batteries 96 W x 38 H x 168 5 D mm 3 25 32 x 1 1 2 x 6 41 64 242 g Approx 8 5 oz not including batteries For purposes of improvement specifications and design are subject to change without notice 71 NIPPON COLUMBIA CoO
137. y tub in a wet basement or near a swimming pool and the like Carts and Stands The appliance should be used only with a cart or stand that is recommended by the manufacturer An appliance and cart combination should be moved with care Quick stops excessive force and uneven surfaces may cause the appliance and cart combination to overturn IS Wall or Ceiling Mounting The appliance should be 18 mounted to a wall or ceiling only as recommended by the manufacturer Ventilation The appliance should be situated so that its 19 ocation or position does not interfere with its proper ventilation For example the appliance should not be situated on a bed sofa rug or similar surface that may block the ventilation openings or placed in a built in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings Heat The appliance should be situated away from heat sources such as radiators heat registers stoves or other appliances including amplifiers that produce heat power supply only of the type described in the operating instructions or as marked on the appliance Grounding or Polarization Precautions should be taken so that the grounding or polarization means of an appliance is not defeated FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE ANTENNA DISCHARGE UNIT NEC SECTION 810

Download Pdf Manuals

image

Related Search

Related Contents

Siemens S75 User's Manual  1. 化学物質等及び会社情報 2. 危険有害性の要約  29 07 22 02 MicroLux m.D  

Copyright © All rights reserved.
Failed to retrieve file