De'Longhi MAGNIFICA ESAM 3500 Instruction Manual
Contents
1. 17 16 3 DESCAUNG unre RRR A 18 16 4 CHANGING COFFEE TEMPERATURE 19 16 5 CHANGING THE LENGTH OF TIME THE APPLIANCE REMAINS ON 19 16 6 SETTING WATER HARDNESS 19 16 7 RESETTING FACTORY DEFAULT SETTINGS 20 17 CHANGING THE LANGUAGE 2 eee eens 20 18 TROUBLESHOOTING bac ts 20 19 PROBLEMS THAT CAN BE RESOLVED BEFORE CALLING THE SERVICE CENTER 21 LIMITED WARRANTY 0 2 cee ee tenet aca aa a a 23 IMPORTANT SAFEGUARDS When using electrical appliances basic safety precautions should always be followed including the fol lowing Read all instructions Do not touch hot surfaces Use handles and knobs protect against fire electrical shock and personal injury do not immerse cord plug or appliance in water or other liquid Never allow the appliance to be used by children e Unplug from the outlet when not in use and before cleaning Allow to cool before fitting or taking off parts and before cleaning the appliance Do not operate with a damaged cord or plug or after the appliance malfunctions or has been dam aged in any manner Return the appliance to the nearest authorized service facility for examination repair or adjustment The use of accessory attachments or spare parts no2. button to confirm the temperature selected e Press the MENU button to exit programming mode or NEXT to change other parameters 16 5 Changing the length of time the appliance remains on The appliance is factory preset to go off automatically one hour after the last coffee has been made The number of hours the appliance remains on max 3 can be increased as follows MENU button the light over the button comes on then press the NEXT button repeatedly until the appliance displays OFF AFTER 1 HOUR e Press the CHANGE button to change the number of hours the appliance remains on e Press the OK button to confirm the value e Press MENU button to exit programming mode or NEXT to change other parameters 16 6 Setting water hardness The descale message is displayed after the appliance has been operated for a factory set period of time cal culated on the basis of the maximum quantity of lime scale which may be contained in the water used If necessary this period of operation can be extended making descaling less frequent by programming the appliance based on the actual lime content in the water used Proceed as follows e remove the Total Hardness Test strip enclosed on page 2 from its packaging then dip it fully in the water for a few seconds Remove it and wait around 30 seconds until it changes color and a number of squares are formed e Turn the appliance on by pressing the button fig 6 e
3. INDEX IMPORTANT SAFEGUARDS 0 2 0 7 1 DESCRIPTION OF THE APPLIANCE see page 3 8 2 SAFETY WARNINGS oe aE eae 8 3 INSTALLATION cach nd ba noted Gas 9 4 USING FORTHE FIRST TIME 0 0 2 0 cee cee eee GR 9 5 TURNING ON AND PREHEATING 2 0 0 0 0 0 eee eens 10 6 PREPARING COFFEE USING COFFEE 10 7 CHANGING THE QUANTITY OF COFFEE INTHE CUP 12 8 REGULATING THE COFFEE MILL 2 00 eee eee eee 12 9 PREPARING ESPRESSO COFFEE WITH PRE GROUND COFFEE INSTEAD OF BEANS 1 2 0 2 0 0c c eee eee 13 PRODUCING HOT WATER miese sasea ete nen A 13 11 CHANGING THE QUANTITY OF HOT WATER 14 12 PREPARING CAPPUCCINOS OR LATTE MILK WITH COFFEE 14 13 PREPARING FROTHED MILK WITHOUT COFFEE 15 14 CHANGING THE QUANTITY OF COFFEE AND MILK FOR 15 15 CLEANING AND MAINTENANCE 0 0 2 0 00 eee eee ee eee 15 15 1 CLEANING THE COFFEE MAKER 15 15 2 CLEANING THE INFUSER 0 0 20 iaa ii A EEE i 16 15 3 CLEANING THE MILK CONTAINER 17 16 CHANGING AND SETTING THE MENU PARAMETERS 17 16 1 SETMING THE CLOCK cc cde hod seen Goede 17 16 2 SETTING AUTO START TIME
4. it can be pulled on by children or tripped over Your product is equipped with a polarized alternating current line plug a plug having one blade wider than the other This plug will fit into the power outlet only one way This is a safety feature If you are unable to insert the plug fully into the outlet try reversing the plug If the plug should still fail to fit contact your electrician to replace your obsolete outlet Do not defeat the safety purpose of the polarized plug 1 DESCRIPTION OF THE APPLIANCE SEE PAGE 3 A Grinding coarseness regulator 7 Milk intake tube for lid with the wording STEA B Coffee bean container MED MILK LATTE C Bean container lid Control Panel D Central lid for ground coffee 1 Display Compartment for measuring scoop 2 MENU light Cup warmer tray 3 Button to activate or deactivate menu parame G Ground coffee funnel ter setting mode H Milk container lid with the wording FROTHED 4 Button to select ground coffee or if the MENU MILK CAPPUCCINO light is on to display the next parameter on the 1 Milk spouts menu J Milk intake tube for lid with the wording FRO 5 Button to rinse the appliance or if the MENU THED MILK CAPPUCCINO light is on to change the menu parameters K Nozzle 6 Button to select hot water or if the MENU light L Water tank removable is on to confirm the menu parameters M Milk container 7 Appliance ON OFF button N Power cable 8 Coffee stren
5. CE Before performing any cleaning operations the appliance must have cooled down and must be disconnec ted from the outlet power supply Never immerse the appliance in the water it is an electrical appliance Do not use solvents or abrasive cleaning products to clean the appliance A soft damp cloth will suffice The infuser grounds container water tank and drip tray must NEVER be washed in the dishwasher 15 1 Cleaning the coffee maker Clean the grounds container as described in section 6 note 7 whenever it requires emptying The water tank should also be cleaned regularly The drip tray is fitted with a level indicator red showing the level of water it contains When the indicator starts to become visible a few millimeters under the drip tray the drip tray must be emp tied and cleaned Check that the holes in the coffee spout are not blocked To unblock them scrape the dry coffee residues away with a needle fig 27 Clean the nozzle regularly with a sponge as shown in fig 26 15 2 Cleaning the infuser The infuser must be cleaned regularly to avoid the build up of coffee encrustations which could cause mal function Proceed as follows e turn the appliance off by pressing button fig 6 do not unplug and wait for the display to go off e open the service door Fig 14 e remove the drip tray and the grounds container Fig 15 and clean them e press the two red release buttons on the infuser sidewa
6. ILL TANK e tank is dirty or encrusted with lime Rinse or descale the tank scale Insert the hot water spout press 3 button and deliver water from the spout GROUND TOG EINE ADJUST FULL e appliance cannot make coffee AND for a few seconds e coffee runs off too slowly the grinding regulator fig 12 one INSERT WATER SPOUT AND click clockwise see section 8 PRESS OK e grounds container is full or missing e Empty the grounds container and clean EAPTY GROUNDS CONTAINER as described in section 6 note 7 then replace e After cleaning the grounds container e Open the service door and insert the INSERT GROUNDS CONTAINER has not been replaced grounds container L e With the function selected the pre e Add the ground coffee as described in ADD PRE GROUND ground coffee has not been poured into section 9 COFFEE the funnel coffee beans have run out e Fill bean container e If the coffee grinder is very noisy this e Contact an authorized De Longhi servi BEANS CONTAINER means a small stone in the coffee beans ce center has blocked the mill e indicates the presence of lime scale e The descaling procedure described DESCALE in the appliance section 16 3 needs to be performed as soon as possible 20 After cleaning the infuser has probably been left out of the coffee maker Leave the service door closed
7. Press MENU button the light over the button comes on then press the NEXT button repeatedly until the appliance displays WATER HARDNESS e Press the CHANGE button repeatedly until the number coincides with the number of squares on the test strip for example if there are 3 squares on the test strip press the button until WATER HARDNESS 3 is displayed e Press button to confirm the value The coffee maker is now programmed to provide the desca ling warning when necessary based on the actual hardness of the water 16 7 Resetting factory default settings reset If you change the original values the factory default values can be reset as follows Press the MENU button the light over the button comes on then press NEXT repeatedly until the applian ce displays RESET DEFAULT e Press the CHANGE button and the appliance displays RESET TO DEFAULT YES e Press button to reset the factory default values e The appliance is now reset to the factory default settings and the READY message is displayed 17 CHANGING THE LANGUAGE To change the language press the CHANGE button for at least 5 seconds until the appliance displays the installation message in various languages To select the required language follow the instructions in section 4 1 18 TROUBLESHOOTING e The water tank is empty is positioned Fill the water tank as described in sec incorrectly tion 6 note 6 and insert it fully F
8. RAMETERS After pressing the button when the appliance is ready you can use the internal menu to modify the fol lowing parameters and functions e Coffee temperature e Clock e Length of time the appliance remains e Auto start time e Water hardness e Descaling process Factory default values 16 1 Setting the clock To set the clock proceed as follows e Press the MENU button the light over the button comes on then press the NEXT button repeatedly until the appliance displays CLOCK 00 00 e Press the CHANGE button to set the clock IF you hold the CHANGE button down the time is changed rapidly e Press the OK button to confirm the value e Press the MENU button to exit programming mode or NEXT to change other parameters 16 2 Setting auto start time This programs the time the appliance will come on automatically and be ready for use Make sure the clock on the appliance is set as described above e Press the MENU button the light over the button comes on then press the NEXT button repeatedly until the appliance displays 17 START TINE 00 00 e Press the CHANGE button to set the auto start time If you hold the CHANGE button down the time is changed rapidly e Press the OK button to confirm the value e Press NEXT once and the appliance displays the message AUTO START NG Press the CHANGE button to modify the function the appliance displays AUTO START YES e Press the butt
9. The cappuccino is ready Sweeten to taste and if desired sprinkle the froth with a little cocoa powder NOTE 1 While preparing the cappuccino milk or coffee delivery can be interrupted by pressing button NOTE 2 If you run out of milk while delivering the milk remove the container and refill it Then put it back in place and press the 2 button to request a cappuccino again NOTE 3 To ensure the milk frother is absolutely clean and hygienic after making cappuccinos clean the channels inside the milk container lid Place a cup under the milk spout Press the CLEAN button on the frothed milk container lid and hold down for at least 8 seconds fig 25 The appliance displays CLEANING After cleaning is complete remove the milk container and place in the refrigerator You should not leave the milk outside the refrigerator for more than 15 minutes NOTE 4 To change the quantity of coffee or milk delivered automatically into the cup follow the instructions in section 14 13 PREPARING FROTHED MILK WITHOUT COFFEE e Remove the lid of the milk container e Fill the container with the quantity of milk you want to prepare fig 19 e If you want to prepare hot frothed milk put the lid with the wording FROTHED MILK CAPPUCCINO on the milk container If on the other hand you want to prepare hot milk without froth put the lid with the wording STEAMED MILK LATTE on the milk container e Attach the milk c
10. and the infuser out of the appliance then follow PRESS the instructions displayed The service door is open e If the service door cannot closed CLOSE DOOR check that the infuser is inserted cor rectly section 15 2 note 1 INSERTINFUSER ASSEMBLY After cleaning the infuser has probably Insert the infuser see section 15 2 been left out of the coffee maker LESSUOFrEE GENERIC ALARN The ground coffee funnel is clogged Too many coffee beans or too much ground coffee has been added Empty the funnel with the help of a plastic knife as described in section 9 note 5 Fig 18 Select a milder taste or reduce the quan tity of ground coffee then deliver the coffee again The inside of the appliance is very dirty Clean the inside of the appliance tho roughly as described in section 15 If the message is still displayed after clea ning contact a service center 19 PROBLEMS THAT CAN BE RESOLVED BEFORE CALLING THE SERVICE CENTER If the appliance is not working the causes of the malfunction can be identified and resolved by referring to section 18 If the malfunction still remain run the following checks before calling the service center The coffee is not hot The cups have not been preheated e The infuser is too cold Heat the cups by rinsing them in hot water or leaving them to rest for at least 20 minutes on the cup war
11. bile drawer particularly near the hinges to ensure they are free to swing smoothly The milk does not run out of the milk spout The intake tube is not inserted or is inserted incorrectly e Insert the intake tube in the rubber washer in the milk con tainer lid fig 20 The milk is not well fro thed The milk container lid is dirty Clean the milk lid as described in section 15 3 The milk contains bub bles or squirts out of the milk spout The milk is not cold enough or is not skim or 2 milk e Use skim or 2 milk at refrigerator temperature If you are still not getting the required results try changing the brand of milk 22 LIMITED WARRANTY This warranty applies to all products with De Longhi or Kenwood brand names What does the warranty cover We warrant each appliance to be free from defects in material and workmanship Our obligation under this warranty is limited to repair at our factory or authorized service center of any defective parts or part thereof other than parts damaged in transit In the event of a products replacement or return the unit must be returned transportation prepaid The repaired or new model will be returned at the company expense This warranty shall apply only if the appliance is used in accordance with the factory directions which accompany it and on an Alternating current AC circuit How long does the coverage last This wa
12. completely normal for there to be tra ces of coffee in the mill This appliance is however guaranteed to be new 9 PREPARING ESPRESSO COFFEE WITH PRE GROUND COFFEE INSTEAD OF BEANS e Press the amp button fig 16 to select the ground coffee function This disables the coffee mill function The appliance displays READS PRE GROUNG Ke Lift the lid in the center place one measuring scoop of ground coffee in the funnel see fig 17 and proceed as described in section 6 Note you can make just one coffee at a time by pressing the y e wp button once only e After using the appliance with pre ground coffee to go back to making coffee using beans deactivate the ground coffee function by repressing the button to prepare the grinder for operation again NOTE 1 Never add the ground coffee when the appliance is off to avoid it from being dispersed inside the appliance NOTE 2 Never add more than one level measuring scoop otherwise either the appliance will not make the coffee the ground coffee will be lost inside the applian ce dirtying it or the coffee will run off in drips and the message GROUND TOO FINE ADJUST MILL AND INSERT WATER SPOUT AND PRESS OK will be displayed NOTE 3 When measuring the quantity of coffee to be added use the measuring scoop supplied only NOTE 4 Do not use freeze dried coffee or other materials that could damage the appliance NOTE 5 If the funnel block
13. d warranty with De Longhi Some states countries do not allow limitations how long an implied warranty lasts so the above exclusions may not apply to you De Longhi does not authorize any other person or company to assume for it any liability in connection with the sale or use of its appli ance How does country law apply This warranty gives you specific legal rights and you may also have other rights which vary from state to state country to country 23
14. e all residue deposited on the bottom are removed IMPORTANT when removing the drip tray the grounds container MUST be emptied even if it is not com pletely full If this is not done when making your next coffee the grounds in the container may exceed the maximum level and block the appliance NOTE 8 while the appliance is delivering coffee never remove the water tank If it is removed it will not be possible to make the coffee and the appliance will display GROUND TOO FINE ADJUST HILL ANG INSERT WATER SPOUT AND PRESS To turn the appliance on again you must insert the water spout fig 4 press the QK button and run off water from the spout for a few seconds When using the appliance for the first time 4 5 cups of coffee need to be made before the applian ce starts to give satisfying results If the appliance malfunctions do not contact the service center right away The problem can almost always be resolved by following the instructions indicated in sections 18 and 19 If this is not the case or for further explanations contact customer service by calling the number listed in the or visit www delonghi com for a list of service centers near you U S and Canada 7 CHANGING THE QUANTITY OF COFFEE IN THE CUP The appliance is factory preset to automatically deliver the following quantities of coffee short coffee 1 35 oz when the 7 button is pressed normal coffee 2 7 when the button is
15. e closed NOTE 2 If it is hard to insert the infuser before inserting it squeeze to size by pressing it vigorously from above and below at the same time as shown in Figure 31 NOTE 3 If it is still hard to insert the infuser leave it out of the appliance close the service door unplug from the outlet then plug in again Wait for all the lights to go off after the self diagnosis then open the door and replace the infuser 15 3 Cleaning the milk container Proceed as follows e Remove the milk spouts fig 32 and the milk intake tubes e Wash the container and lids a dishwasher or in hot soapy water Make sure there are no milk residues inside the two holes in the lids of the milk container indicated by the arrows in the figure or the milk intake tubes replace the components of the lid with the wor ding STEAMED MILK LATTE insert the milk spout and milk intake tube the softer in the hole in the lid as shown in fig 20 replace the components of the lid with the wor ding FROTHED MILK CAPPUCCINO insert the milk spout and milk intake tube the harder one in the hole in the lid as shown in fig 20 Note To avoid using the wrong intake tube the STEAMED MILK LATTE tube cannot be inserted in the FROTHED MILK CAPPUCCINO lid and the FROTHED MILK CAPPUCCINO tube cannot be inserted in the STEAMED MILK LATTE lid 16 CHANGING AND SETTING THE MENU PA
16. gth selection button O Cup tray 9 One or two cups short coffee button P Measuring scoop for pre ground coffee 10 One or two cups normal coffee button Q Drip tray removable 11 or two cups long coffee button R Hot water spout 12 Single Touch Cappuccino Latte button 5 Service door T Coffee grounds container removable U Coffee spout adjustable in height V Mobile drawer W Infuser X Control panel Y Milk container lid with the wording STEAMED MILK LATTE 2 SAFETY WARNINGS READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE CONSULTATION This appliance is designed to make espresso coffee and hot drinks Use with care to avoid scalds from the water and steam jets or through incorrect use This appliance is intended for domestic use only Any other use is considered improper and thus dange rous The manufacturer cannot be held responsible for any damage caused through incorrect wrong or unrea sonable use When using the appliance do not touch the hot surfaces Never touch the appliance with wet or damp hands or feet The appliance is not intended for use by young children or infirmed persons without supervision Never allow children to play with the appliance In the event of failure or malfunction unplug the appliance from the outlet and do not tamper with it in any way If it requires repair contact an authorized service center only and ask for original spare parts to be used Failure t
17. ically performs a series of run offs and pauses to remove lime scale depo sits from inside the coffee maker e After about 30 minutes the appliance displays RINSING FILL TANK The appliance must now be rinsed thorougly to eliminate residues of descaling solution from inside the appliance Proceed as follows e empty the water tank rinse and fill with clean water e Reposition the tank 18 e Empty the collection container and put it back under the hot water spout e Press the OK button Hot water is delivered from the spout into the container below and the appliance displays RINSING e When the water tank is empty the appliance displays the message RINSING COMPLETE PRESS OK e Press the OK button and refill the water tank with clean water The descale program is now terminated and the appliance is ready to make coffee again NOTE If the descaling cycle is interrupted before completion the appliance continues to display the descale message and the program must be started again from the beginning IMPORTANT FAILURE TO DESCALE THE APPLIANCE REGULARLY INVALIDATES THE WARRANTY 16 4 Changing coffee temperature To change the temperature of the coffee proceed as follows e Press the MENU button the light over the button comes on then press the NEXT button repeatedly until the appliance displays TEMP EXTRA HOT e the CHANGE button until the appliance displays the required coffee temperature e Press
18. ig 6 The appliance displays HEATINGUP PLEASE WAIT to indicate preheating is underway Once preheating is completed the appliance displays RINSING PLEASE WAIT and performs an automatic rinse cycle little hot water runs from the spouts and is collected in the drip tray below The appliance now displays the ready message READY REGULAR TASTE PREPARING COFFEE USING COFFEE BEANS 1 The appliance is preset to make coffee with a regular taste You can also choose coffee with an extra mild mild strong or extra strong taste To choose the required taste press the button fig 7 The selected coffee taste will be displayed Place 1 cup under the spouts to make 1 coffee fig 8 or 2 cups for 2 coffees fig 9 For a creamier cof fee lower the spouts to bring them as close to the cups as possible Fig 10 Press the button to make a short coffee fig 11 button for a normal coffee or the but ton for a long coffee To make 2 coffees press the button twice within 2 seconds To change the quantity of coffee delivered automatically into the cup follow the instructions in section 7 The appliance now grinds the beans and starts brewing the coffee into the cup Once the desired quantity has been reached the appliance automatically stops delivering the coffee and ejects the grounds into the coffee grounds container After a few seconds the ready message is displayed again and you ca
19. it for the first time carefully follow the step by step instructions described in the following paragraphs 4 USING FOR THE FIRST TIME Ie The first time you use the appliance select the language To set English plug the appliance into the outlet and wait for the following message to be displayed PRESS G6 TOINSTALL ENGLISH While the message is displayed press the button fig 1 for at least three seconds until the display shows ENGLISHINS TALLED The appliance then displays the setting message in English If you select the wrong language by mistake fol low the instructions in section 17 to choose the right one After 5 seconds the appliance displays FILL TANK To fill remove the tank fig 2 rinse and fill with fresh water Never exceed the MAX line Put the tank back and push as far as it will go Place a cup under the hot water spout fig 3 If the water spout is not in place INSERT WATER SPOUT is displayed Attach it as shown in figure 4 making sure the arrow on the spout is lined up with the arrow on the control panel of the appliance fig 4 The appliance now displays PRESS OA Press the OK button fig 1 and after a few seconds a little water will run from the spout running water stops automatically 5 The appliance displays TURNING OFF PLEASE WAIT and it goes off 6 Fill the coffee bean container with coffee beans fig 5 5 TURNING ON AND PREHEATING 1 Press the 1 button f
20. mer tray on the cup warmer tray on the top of the appliance with the appliance on see section 6 note 3 Heat the infuser by pressing the 29 button fig 13 befo re making the coffee see section 6 note 3 enough The coffee is not creamy The coffee is ground too coarsely Wrong type of coffee Turn the grinding adjustment knob one click counterclock wise see section 8 Use a type of coffee for espresso coffee makers The coffee runs out The coffee is ground too finely Turn the grinding adjustment knob one click clockwise see slowly section 8 The coffee runs out The coffee is ground too coarsely Turn the grinding adjustment knob one click counterclock quickly wise see section 8 The coffee does not come out of one of the spouts The spout holes are blocked Scrape the remains of dry coffee accumulated with a needle Fig 27 21 When the Sand W buttons are pressed the appliance does not deliver coffee but only water The ground coffee may be blocked in the funnel Remove the ground coffee inside the funnel using a plastic knife see note 5 section 9 Then clean the infuser and the inside of the appliance see section 15 When the button is pressed the appliance does not come on The appliance is not plugged in Check that the power cable is plugged into the outlet The infuser cannot be re
21. moved for cleaning The appliance is on The infuser can only be removed if the appliance is off e Turn the appliance off and remove the infuser see section 15 2 IMPORTANT the infuser can only be removed if the appliance is off Attempting to remove the infuser with the appliance on will risk causing damage Pre ground coffee 15 being used not beans and the appliance does not deliver coffee e Too much ground coffee has been added The 44 button has not been pressed and the appliance has used both the ground coffee added and the coffee ground by the grinder Ground coffee has been added when the appliance is off e e Remove the infuser and thoroughly clean the inside of the appliance as described in section 15 Repeat the operation using a maximum of 1 measuring scoop of ground coffee Thoroughly clean the inside of the appliance as described in section 15 Repeat the operation first pressing 4 but ton as described in section 9 Remove the infuser and thoroughly clean the inside of the appliance as described in section 15 Repeat the opera tion but switch the appliance on first The coffee does not come out of the spouts but rather around the service door e The holes in the spouts are clogged with dry coffee The mobile drawer inside the service door is blocked and cannot swing e e Scrape the holes with a needle see section 15 1 Fig 27 Thoroughly clean the mo
22. n make another coffee turn the appliance off press button Before going off the appliance performs an automatic rinse cycle a little hot water runs out from the spouts and is collected in the drip tray beneath Take care to avoid scalds wo ar NOTE 1 f the coffee is delivered a drop at a time or not at all turn the grinding coarseness regulator fig 12 one click clockwise see section 8 Turn one click at a time until the coffee is delivered adequately The grinding coarseness regulator must only be turned when the coffee mill is running 10 NOTE 2 If the coffee is delivered too fast and is not creamy enough turn the grinding coarseness regulator fig 12 one click counterclockwise see section 8 Avoid turning the grinding coarseness regulator excessively otherwise when you select 2 cups the coffee may run out in drips The grinding coarseness regulator must only be turned when the coffee mill is running NOTE 3 Tips to make hotter coffee e When you turn the appliance on if you want to make a short coffee less than 2 oz use the hot rinse through water to preheat the cups If 2 to 3 minutes have passed since you last made coffee before making coffee again you must preheat the infuser by pressing the button fig 13 Run off the water into the underlying drip tray or alternatively use this water to fill and then empty the cup to be used for the coffee so as to
23. o respect the above could reduce the safety of the appliance 3 INSTALLATION After unpacking make sure the appliance is complete and undamaged If in doubt do not use it Contact professionally qualified personnel The packing elements plastic bags polystyrene foam etc should be kept out of the reach of children as they are a safety hazard Place the appliance on a work surface far away from water taps basins and sources of heat After positioning the appliance on the work top leave a space of at least 2 in between the surfaces of the appliance and the side and rear walls and at least 8 in above the coffee maker Never install the appliance in environments where the temperature may be freezing the appliance could be damaged if the water freezes Connect the appliance to a grounded socket with a minimum current rating of 10 amps The manufac turer is not liable for possible accidents caused by failure to do so If the power socket does not match the plug on the appliance have the socket replaced with a suitable type by a qualified professional The power cable on this appliance must not be replaced by the user as this operation requires the use of special tools If the cable is damaged or requires replacing contact an authorized service center only to avoid all risks You should personalize water hardness as soon as possible following the instructions in section 16 6 To correctly learn how to use the appliance when starting
24. on to activate auto start NOTE when the appliance is turned off and auto start time is set the symbol 4 appears alongside the time on the unlit display e Press the MENU button to exit programming mode or to change other parameters 16 3 Descaling Over time the continuous heating up of the water used to make the coffee leads to lime scale building up in the inner circuits of the appliance When the appliance displays the message DESCALE you should perform the descale cycle Proceed as follows make sure the appliance is ready e press the MENU button the light over the button comes on then press the NEXT button repeatedly until the appliance displays BESCALE NG e Press CHANGE and the appliance displays the message DESCALE YES e Press the button to start the descale program e Empty the water tank and pour in the contents of one bottle 125 ml of DURGOL descaler plus 34 oz of water For subsequent descaling operations descaling solution can be purchased from authorized tech nical service centers Note Make sure splashes of descaler do not fall onto surfaces sensitive to acid such as marble limesto ne and granite Place a plastic or glass container with a minimum capacity of 34 ounces under the hot water spout Fig 3 e press the OK button Descaler runs off from the hot water spout into the container below The applian ce displays APPLIANCE IN GESCALE descale program automat
25. ontainer to the appliance fig 22 Place a sufficiently large cup under the milk spout fig 23 e Press button twice within 2 seconds The appliance displays FILA FRETHING and after a few seconds the frothed milk is delivered from the milk spout into the cup below e After delivery clean the channels inside the milk container by pressing the CLEAN button as described in the previous section note 3 14 CHANGING THE QUANTITY OF COFFEE AND MILK FOR CAPPUCCINOS The appliance is factory preset to automatically deliver a standard cappuccino To change these quantities proceed as follows e Fill the container with milk up to the maximum level indicated on the container e Press 92 button for at least 8 seconds until the appliance displays FILA FOR CAPPUCCING PROGRAM QUANTITY Now release the button The appliance starts to deliver milk Once the required quantity of milk has been delivered press gt button again Milk delivery stops and the quantity is memorized You should not run frothed milk for more than 3 minutes at a time e After a few seconds the appliance delivers coffee into the cup and displays COFFEE FOR CAPPUCCINO PROGRAM QUANTITY Once the required quantity of coffee has been delivered press the button again Coffee delivery stops and the quantity is memorized The appliance is now re programmed with the new settings and displays READY 15 CLEANING AND MAINTENAN
26. preheat it e Unless preheated do not use cups that are too thick as they will absorb too much heat e Use cups that have been preheated by rinsing them with hot water or by leaving them for at least 20 minutes on the cup warmer tray on top of the appliance with the appliance on NOTE 4 while the appliance is making the coffee delivery can be stopped at any time by pressing the w or W button as previously selected NOTE 5 as soon as delivery is complete to increase the quantity of coffee simply press and hold the SZ w or W button as previously selected until the desired quantity is reached this operation must be performed within 3 seconds from when coffee delivery from the spouts ceases NOTE 6 when the appliance displays FILL TANK the water tank must be refilled or the appliance will not make coffee It is normal for there to be a little water left in the tank when the message is displayed NOTE 7 The appliance counts the number of coffees made Every 14 single coffees or 7 doubles the appliance displays EAPTYGROUNGS CONTAINER indicating that the grounds container is full and must be emptied and cleaned Until the grounds container has been cleaned the appliance continues to display the message and cannot make coffee To clean open the service door at the front by pulling the handle fig 14 remove the drip tray fig 15 empty and clean Empty the grounds container and clean thoroughly making sur
27. pressed long coffee 4 when the wp button is pressed To change these quantities proceed as follows press the button corresponding to the quantity you want to change we W for at least 8 seconds then release until the message PROGRAM QUANTITY is displayed and coffee is delivered when the coffee in the cup reaches the required level press the same button again to memorize the new amount The appliance is now re programmed with the new settings and displays READY 8 REGULATING THE COFFEE MILL The coffee grinder is preset in the factory to prepare coffee correctly and should not require regulating ini tially However after making the first coffees if you find that coffee delivery is either too fast or too slow in drips the grinding coarseness regulator can be adjusted fig 12 Turning it 1 click 1 number clockwise speeds up coffee delivery without drips Turning 1 click counterclockwise slows down delivery giving a creamier appearance to the coffee These adjustments will only be evident after at least 2 cups of coffee have been delivered The grinding coarseness regulator must only be turned when the coffee mill is running Turn one click counterclockwise to obtain slower delivery and a creamier appearance finer ground coffee Turn one click clockwise for faster delivery not a drop at a time coarser ground coffee Coffee has been used to factory test the appliance and it is therefore
28. rranty runs for two years 2 from the purchase date found on your receipt and applies only to the original purchaser for use What is not covered by the warranty The warranty does not cover defects or damage of the appliance which result from repairs or alterations to the appliance outside our factory or authorized service centers nor shall it apply to any appliance which has been subject to abuse misuse negligence or accidents Also consequential and incidental damage resulting from the use of this product or arising out of any breach of contract or breach of this warranty are not recoverable under this warranty Some states do not allow the exclusion or limitation of incidental or consequential damage so the above limitation may not apply to you How do you get service If repairs become necessary see contact information below U S Residents Please contact our toll free hotline at 1 866 528 8323 1 866 Latte Best log onto our website at www delonghi com Residents of Canada Please contact our toll free hotline at 1 888 335 6644 or log onto our website at www delonghi com Residents of Mexico Please contact our toll free number 01 800 711 8805 for assistance or log onto our website at www delonghi com The above warranty is in lieu of all other express warranties and representations All implied warranties are limited to the applicable warranty period set forth above This limitation does not apply if you enter into an extende
29. s due to moisture inside the appliance or if more than one measuring scoop of pre ground coffee has been used use plastic knife to push the coffee down fig 18 then remove and clean the infuser and appliance as described in paragraph 15 2 Cleaning the infuser 10 PRODUCING HOT WATER e Always make sure the appliance is ready Make sure the water spout is attached to the nozzle fig 4 e Position a container under the spout fig 3 e Press 4 button fig 1 The appliance displays WATER and hot water is delivered from the water spout into the container below you should not run off hot water for more than two minutes at a time To stop the flow press 28 button Once the set quantity of hot water has been reached delivery stops automatically 11 CHANGING THE QUANTITY OF HOT WATER The appliance is factory preset to automatically deliver 8 5 oz of hot water To change these quantities proceed as follows Attach the water spout fig 4 Position a container under the spout fig 3 Press the 2 button for at least 8 seconds then release The appliance displays HOTWATER PROGRAM QUANTITY and hot water is delivered from the water spout When the hot water in the cup reaches the required level press the 42 button to memorize the new amount You should not run off hot water for more than two minutes at a time 12 PREPARING CAPPUCCINOS OR LATTE MILK WITH COFFEE Select the taste of
30. t recommended by the appliance manufacturer may result in fire electrical shock or personal injury Do not use outdoors Do not let the cord hang over the edge of the table or counter or touch hot surfaces Do not place near hot gas or electrical burner or in a heated oven e Plug cord into the wall outlet To disconnect turn any control to off then remove plug from wall outlet Do not use the appliance for other than the intended use This appliance is to be utilized for domes tic use only Any other use is to be considered improper and therefore dangerous WARNING To reduce the risk of fire or electric shock do not remove the cover No user serviceable parts inside Repair should be done by authorized service personnel only SAVE THESE INSTRUCTIONS THIS PRODUCT IS FOR HOUSEHOLD USE ONLY SHORT CORD INSTRUCTIONS A short power cord is provided to reduce risks resulting from becoming entangled in or tripping over a longer cord Longer detachable power supply cords or extension cords are available and may be used if care is exercised in their use extension cord is used the marked electrical rating should be at least as great as the electrical rating of the appliance If the appliance is provided with 3 wire grounding type cord the extension should be a GROUNDING TYPE 3 WIRE CORD The longer cord should be arranged so that it will not drape over the counter top or table top where
31. the coffee you want to use to make the cappuccino by pressing the button Remove the frothed milk lid from the milk container Fill the container with about 3 5 ounces of milk for each cappuccino to be prepared fig 19 Never exceed the MAX level corresponding to about 25 oz marked on the container You are recommended to use skim or 2 milk at refrigerator temperature about 41 F 5 C If you want to make cappuccino frothed milk coffee put the lid with the wording FROTHED MILK CAPPUCCINO on the milk container If on the other hand you want to prepare hot milk with coffee put the lid with the wording STEAMED MILK LATTE on the milk container Make sure the milk intake tube is correctly inserted in the rubber washer fig 20 and that the frothed milk spout is moved outwards as shown in fig 23 Remove the hot water spout fig 21 and attach the milk container to the nozzle making sure the arrow on the container lid is lined up with the arrow on the control panel of the appliance fig 22 Position the milk tube as shown in fig 23 and then place a sufficiently large cup under the coffee and milk spouts fig 23 Press button fig 24 The appliance displays CAPPUCCINO OR LATTE and after a few seconds the frothed milk is delivered from the milk spout into the cup below Delivery stops automatically The appliance then grinds the beans delivers the coffee and displays the ready message again
32. ys and towards the center Fig 28 and pull it out e IMPORTANT THE INFUSER CAN ONLY BE REMOVED IF THE APPLIANCE IS OFF ATTEMPTING TO REMOVE THE INFUSER WITH THE APPLIANCE ON MAY CAUSE SERIOUS DAMAGE e wash the infuser under running water without using detergents Never wash the infuser in the dishwasher e carefully clean the inside of the appliance To remove the coffee stuck to the parts inside the appliance scrape it with a plastic or wooden fork Fig 29 and then pick up all the residues using a vacuum clea ner Fig 30 replace the infuser by sliding it onto the supports and pin at the bottom then push the PUSH symbol fully in until it clicks into place Infuser Push the PUSH symbol fully in until it clicks into place After having heard the click check that the red buttons have snapped out Bottom pipe on the infuser The pin must be inserted into the bottom Support Pin pipe on the infuser The two red buttons have not snapped out The two red buttons have snapped out CORRECTLY gt CORRECT INCORRECT Check that the two red buttons have snapped out otherwise the door cannot be closed e replace the drip tray complete with the grounds container e close the service door NOTE 1 If the infuser is not inserted correctly until it clicks into place and the two red buttons have not snap ped out the service door cannot b
Download Pdf Manuals
Related Search