De'Longhi MTR2000 User's Manual
Contents
1. or elsewhere on the plug Always state this colour when ordering a replacement fuse cover Only I3amp replacement fuses which are asta approved to B S 1362 should be fitted This appliance conforms to the Norms EN 55014 regarding the sup pression of radio interference 3 6 LEUTE Retro Living innovation 57850 12900 04 072. with minimum energy consumption Cleaning and maintenance The heater should not require any maintenance However before attempting to clean the heater unplug from the mains and wait for it to cool this should take around 30 minutes It is sufficient to remove external dust with a soft dry cloth Never use abrasive powders or solvents If necessary remove concentrated areas of dirt with a vacuum cleaner Warnings Do not use the heater in a bathroom or in the vicinity of bath tubs wash basins showers or swimming pools Never use the heater to dry laundry Never rest the power cable on the heater s elements while it is hot Only use the heater in an upright position The heater must be positioned at least 50cm from furniture or other objects If the supply cord is damaged it must be replaced by the manu facturer its service agent or similarly qualified persons in order to avoid a hazard It is normal for the heater to make crackling noises during its first use or if it has not been used for a long time The body of the heater is filled with an exact quantity of oil If repairs are necessary which call for the opening of the heater they must be done only by the manufacturer or an authorised service centre In the unlikely event of oil leakage contact the manufacturer or an authorised service centre Do not use this radiator in rooms which have a floor area small er than 4m as this may lead to
3. ing this MIN service Disposing of a household appliance separately avoids possible negative consequences for the environ ment and health deriving from inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources As a reminder of the need to dispose of household appliances separately the product is marked with a crossed out wheeled dustbin Retro COTA Living innovation Warning this appliance Electrical requirements Before using this appliance ensure that the voltage indicated on the product corresponds with the main voltage in your Green and Yellow to Earth home if you are in any doubt about your supply contact your must be earthed local electricity company u The flexible mains lead is supplied connected to a B S 1363 fused plug having a fuse of 13 amp capacity Should this plug not fit the socket out Brown lets in your home it should be cut off and replaced with a suitable plug AQ 2 to Live B Blueto 7 following the procedure outlined below Cord Clamp Note Such a plug cannot be used for any other appliance and should therefore be properly disposed of and not left where children might find it and plug it into a supply socket with the obvious consequent danger N B We recommend the use of good quality plugs and wall sockets that can be switched off when the machine is not in use Important the wires in the mains lead fit
4. instructions DeLonghi RETRO OIL FILLED RADIATOR MTR2000 Please retain these instructions for future reference Living innovation Indicator light Carry handle Thermostat knob 2 ENT Retr Living innovation Thank you for choosing this De Longhi radiator To get the very best out of your new radiator it is advisable to read these instructions before using it This will ensure that you gain optimum results and use the appliance safely General instructions Take the radiator out of its packaging and remove any poly styrene pieces or any other packaging material that might be lodged inside it 2 Check that neither the radiator nor the power cable has been damaged in any way during transportation 3 Do not operate the radiator if damaged Easy wheel system Turn the radiator upside down on a rug or a soft surface in order to prevent damaging the paint finish Fully unfold the castors by turning them outwards Fig 1 Turn the radiator back to its upright position Electrical connection Before plugging the radiator into the mains check that your supply voltage is the same as that shown on the rating plate of the radiator If using more than one appliance at a time it is important to ensure that the ring main is adequate to cope with the power requirements It is important to ensure that the socket is adequately earthed This appliance complies with EEC directive 89 336 regarding elect
5. overheating The heater must never be placed immediately under a fixed mains socket When scrapping the radiator respect legislation on the disposal of oil The use of an extension lead is not recommended however if it is necessary then follow carefully the extension lead s instructions and most importantly ensure that the extension lead is correctly rated in accordance with the radiator being used and NEVER overloaded In order to avoid any danger caused by an accidental resetting of the safety system this radiator must not be powered through an external timer As with any electrical radiator whilst the instructions aim to cover as many eventualities as possible caution and common sense should be applied when operating your radiator particularly in the vicinity of young children The radiator is fitted with a safety device which turns the radiator off in case of accidental overheating To reset disconnect the plug from the power for 30 minutes remove the cause of overheating then plug the radiator in again IMPORTANTT never for any reason cover the radiator during operation as this could lead to dangerous overheating IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002 96 EC At the end of its working life the product must not be disposed of as urban waste It must be taken to a special local authority differentia ted waste collection centre or to a dealer provid
6. romagnetic compatibility Instruction for use Using for the first time On using the radiator for the first time we advise that you turn it on to the maximum power setting for up to 8 hours This is to eliminate the heater s new odour During this time ensure that the room is well ventilated Operation and use Turning the appliance on Insert the plug into the mains socket and switch on turning the ther mostat knob clockwise until it can be turned no further then posi tion the switch up in the I position minimum power or down in the II position maximum power The indicator light will come on We suggest that on days when temperatures are not praticularly cold Select minimum output to optimize savings on energy con sumption 3 Retro UE Living innovation LEUTE Retro Living innovation How to switch the radiator off To switch the radiator OFF position the switch in the 0 position in the middle position Adjusting the thermostat When the room has reached the desired temperature turn the thermostat knob slowly in an anticlockwise direction until you hear a click and the radiator turns off indicator light off The thermostat will now keep the temperature in the room constant turning the heater on and off as appropriate Frost protection function With the thermostat knob in position and the switch in the II posi tion the radiator maintains the room at a temperature of about 5 C preventing freezing
7. ted to this appliance are coloured in accordance with the following code GREENANDYELLOW EARTH BLUE NEUTRAL BROWN LIVE As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows The wire which is coloured green and yellow must be connected to the terminal in the plug which is marked with the letter E or by the earth symbol or coloured green or green and yellow The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red When wiring the plug ensure that all strands of wire are securely retained in each terminal Do not forget to tighten the mains lead clamp on the plug If your electricity supply point has only two pin socket out lets or if you are in doubt consult a qualified electrician Should the mains lead ever require replacement it is essential that this operation be carried out by a qualified electrician and should only be replaced with a flexible cord of the same size After replacement of a fuse in the plug the fuse cover must be refitted If the fuse cover is lost the plug must not be used until a replacement cover is obtained The colour of the correct replacement fuse cover is that of the coloured insert in the base of the fuse recess
Download Pdf Manuals
Related Search