Dakota Digital LAT-NR291 User's Manual
Contents
1. INSTALLATION INSTRUCTIONS Dakota Digital ATN urera MAN 650201 Kit Includes Installation 1 Remove the original bulb sockets 2 Remove the tail light housing hardware so the housing can be removed from the car Remove the housings from the vehicle carefully so the body gaskets are not damaged 3 Next remove the lens to gain access to the housing There are four screws that hold the lens in place remove the screws and separate the lens carefully moe tet Fa y a md 4 Now is a good time to clean the lens and housing If lenses are in bad shape a new set is recommended 5 Remove the round mounting plate from the bottom of the assembly Itis attached with two lock nuts MAN 650201 6 Pass the wires through the housing where the original bulb and socket were Set the LED assemblies into the housing so the studs extend out the hole in the bottom of the housing a e 7 Feed the wires through the larger hole in the mounting plate Guide the mounting plate to the bottom of the housing The flat side of the mounting plate should be down and the side with the slight raised center should go up toward the housing This will align the mount in the original housing 8 Slide the mounting plate over the two studs and tighten it down with the two 6 lock nuts This will secure the LED assembly into the housing you are now ready for re assembly 9 Repeat the steps above for the second ligh2. nd condition be proven defective in material or workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at the Company s option without charge for parts or labor directly related to repairs of the defect s To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defects transportation prepaid to the factory This Warranty is valid for the original purchaser only and may not be transferred This warranty does not cover damage to vehicle electrical system This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liability other that e
3. ss harness assembly assembly Ground Black Chassis or body 14 Repeat for the other side 15 Test the tail lights brake lights and turn signals If the turn signals do not flash you will need to upgrade your flasher If you are replacing only the rear turn signals you should be able to use a heavy duty electronic flasher from your local parts store If you are replacing both front and rear or do not have front bulbs you will need a no load flasher Dakota Digital part number LAT NLF SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our units Should you ever need to send the unit back for repairs please package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include a complete description of the problem your full name and address street address preferred and a telephone number where you can be reached during the day An authorization number for products being returned for repair is needed We will contact you if any repair charges exist Any returns for warranty work must include a copy of the dated invoice or bill of sale LED LIGHTING LIMITED LIFETIME WARRANTY DAKOTA DIGITAL the Company warrants to the ORIGINAL PURCHASER of this LED Lighting product under normal use a
4. t 10 Install the lens and reassemble the housing insuring all gaskets are intact and in place 11 Install the housing back into the vehicle MAN 650201 12 Cut off the existing light socket as it will not be used Do not strip the wires Trim the wires from LED assembly to appropriate length once mounted making sure wires are routed cleanly and securely 13 Use the supplied moisture resistant pigtail connectors to attach the wires from the new LED assembly to the existing vehicle harness Insert appropriate wire from vehicle harness and mating LED assembly wire into a connector and crimp following instructions below For the best connection soldering is recommended But to simplify installation the supplied connectors will provide a fast weather resistant connection The correct crimp method for the supplied connectors is 1 Insert UNSTRIPPED wires into the connector and ensure they are all they way in by observing the clear bottom of the connector to see the wires are touching the end 2 Use pliers to push the blue cap down flush with the edge of the clear body completing the connection The connection will only be correct if pressed firmly down with pliers Attach to metal bolt or screw for Ground connection GREEN wire GREEN wire BROWN wire ks BROWN wire from LED from LED from LED from LED assembly assembly assembly assembly Turn Signal wire Tail Light wire geet ph BLACK Wkra from vehicle from vehicle rom rom harne
5. xpressed herein in connection with the sale of this product FOR SERVICE SEND TO DAKOTA DIGITAL 4510 W 61st ST N SIOUX FALLS SD 57107 USA 800 852 3228 Email us at techsupport dakotadigital com MAN 650201
Download Pdf Manuals
Related Search