Dakota Digital LAT-NR402 User's Manual
Contents
1. under normal use and condition be proven defective in material or workmanship DURING THE LIFETIME OF THE CAR IN WHICH IT WAS ORIGINALLY INSTALLED such defect s will be repaired or replaced at the Company s option without charge for parts or labor directly related to repairs of the defect s To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defects transportation prepaid to the factory This Warranty is valid for the original purchaser only and may not be transferred This warranty does not cover damage to vehicle electrical system This Warranty does not apply to any product or part thereof which in the opinion of the Company has been damaged through alteration improper installation mishandling misuse neglect or accident This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY ANY ACTION FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABLITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM DATE OF ORIGINAL PURCHASE IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESSED OR IMPLIED WHATSOEVER No person or representative is authorized to assume for the Company any liab2. INSTALLATION INSTRUCTIONS be a a Dakota Dig ital omen for 1980 90 Caprice 1986 90 Impala 1983 84 Pontiac Parisienne MAN 650235 rev B Kit Includes ee Gee GE ie eee z a Installation Remove the original bulb connector from the back side of the housing Remove the tail light housing from the car Remove any body trim from the housing so the screws holding the lens on are exposed Remove the tail light lens Pon gt 5 Now is a good time to clean the lens and housing If lenses are in bad shape a new set is recommended 6 Remove the lock nuts and aluminum back plate from the back of the new LED assembly MAN 650235 B 7 Insert the new LED assembly through the hole where the original bulb and connector were Use caution when feeding the wires through to avoid damaging the wire insulation 8 Feed the wires through the large hole in the back plate and attach the back plate onto the back side of the housing The flat side of the mounting disk should be toward the outside and the side with the slight raised center should go in toward the housing This will align the mount in the original housing A A Se 9 Secure the back plate with the supplied 6 lock nuts 10 Make sure the original lens gasket is in place and replace the tail light lens 11 Replace the body trim and reinstall the tail light housing into the vehicle MAN 650235 B 12 Cut off the existing light socket as it will n
3. ility other that expressed herein in connection with the sale of this product FOR SERVICE SEND TO DAKOTA DIGITAL 4510 W 61st ST N SIOUX FALLS SD 57107 USA 800 852 3228 Email us at techsupport dakotadigital com MAN 650235 B
4. or Pink Passenger s Turn Green Yellow or Purple Ground Black Chassis or body 14 Repeat for the other side 15 Test the tail lights brake lights and turn signals If the turn signals do not flash you will need to upgrade your flasher If you are replacing only the rear turn signals a heavy duty electronic flasher from your local parts store should be able to be used If you are replacing both front and rear or do not have front bulbs you will need a no load flasher Dakota Digital part number LAT NLF SERVICE AND REPAIR DAKOTA DIGITAL offers complete service and repair of its product line In addition technical consultation is available to help you work through any questions or problems you may be having installing one of our units Should you ever need to send the unit back for repairs please package the product in a good quality box along with plenty of packing material Ship the product by UPS or insured Parcel Post Be sure to include a complete description of the problem your full name and address street address preferred and a telephone number where you can be reached during the day An authorization number for products being returned for repair is needed We will contact you if any repair charges exist Any returns for warranty work must include a copy of the dated invoice or bill of sale LED LIGHTING LIMITED LIFETIME WARRANTY DAKOTA DIGITAL the Company warrants to the ORIGINAL PURCHASER of this LED Lighting product
5. ot be used Do not strip the wires Trim the wires from LED assembly to appropriate length once mounted making sure wires are routed cleanly and securely 13 Use the supplied moisture resistant pigtail connectors to attach the wires from the new LED assembly to the existing vehicle harness Insert appropriate wire from vehicle harness and mating LED assembly wire into a connector and crimp following instructions below For the best connection soldering is recommended But to simplify installation the supplied connectors will provide a fast weather resistant connection The correct crimp method for the supplied connectors is 1 Insert UNSTRIPPED wires into the connector and ensure they are all they way in by observing the clear bottom of the connector to see the wires are touching the end 2 Use pliers to push the blue cap down flush with the edge of the clear body completing the connection The connection will only be correct if pressed firmly down with pliers GREEN wire g C GREEN wire BROWN wire e BROWN wire BLACK wire i BLACK wire from LED from LED from LED from LED from LED from LED assembly assembly assembly assembly assembly assembly Turn Signal wire GREEN wire Tail Light wire BROWN wire ground wire from BLACK wire from vehicle from LED from vehicle from LED vehicle harness from LED harness assembly harness assembly assembly LED wires Vehicle harness Tail light Brown Brown or Black Driver s Turn Green Green
Download Pdf Manuals
Related Search