Home

D-Link DP-G321 User's Manual

Contents

1. IP Address 192 168 010 Subnet Mask 255 255 255 0 System Default Gateway 192 168 0 1 C Automatically Assign Wirel dii DNS Server Address 1 42 22 2 0 0 0 0 UPnP Enable C Disable MAC Rendezvous Enable C Disable Second HTTP Port OC Enable Disable Port Number 0 For Remote Web Configuration and IPP Printing Microsoft Network Workgroup WORKGROUP AppleTalk AppleTalk Zone USB1 Chooser Name PS 400E61 U1 Printer Type Laserwriter PostScript Level Level 2 v Font Group Standard 35 USB2 Chooser Name PS 400E61 U2 Printer Type Laserwriter PostScript Level Level 2 v Font Group Standard 35 LPT Chooser Name PS 400E61 P3 Printer Type Laserwriter PostScript Level Level 2 v Font Group Standard 35 v VI Apply Cancel TCP IP Printing for Windows 98SE Me continued Network Ed Configuration Identification Access Control The following network components are installed m Client for Microsoft Networks m Microsoft Family Logon D Link AirPlus treme G DWL GE50 Dial Up Adapter Realtek RTL8133 Family PCI Fast Ethernet MIC Go to Start gt Settings gt Control Panel Double click on Network af Remove Propenies Click Add Primary Network Logan Microsoft Family Logon File and Print Sharing Description OF Cancel Select Network Component Type Ei E4 Click the type of network compone
2. Then complete the following steps Install the network cards modems and cables Turn on all computers printers and external modems Connect to the Internet When you click Nest the wizard will search for a shared Internet connection an your network H etwork Setu D W izard In this window select the Select a connection method best description of your computer If your computer Select the statement that best describes this computer connects to the This computer connects directly to the Internet The other computers on my network connect Internet through a to the Internet through this computer gateway route f This computer connects to the Internet through another computer on my network or through select the second a residential gateway View an example option as shown Click Next Networking Basics continued Enter a Computer description and a Computer name Give this computer a description and name optional Network Setup Wizard Rotana Examples Family Room Computer or Monica s Computer Computer name Office Examples FAMILY or MONICA The current computer name is Office Click Next Cae fe Enter a Workgroup name All computers on your network should have the same Workgroup name Mame your network by specifying a workgroup name below All computers on pour network should have the same workgroup name Network Setup Wizard Workgroup name Acc
3. Apply Cancel Network SNMP Management SNMP Simple Network Management Protocol is a set of protocols for managing complex networks Community 1 2 3 Enter a name in the Name box and configure the Access Right by selecting Read Only or Read Write from the pull down menu Click Apply if you have made changes Using the Web Configuration continued Tools Click on the Tools link from the tools bar of the main screen to enter the Tools Page it provides the control options that include Print Test E mail Reset Upgrade and Backup Tools gt Print Test D Link DP G321 Building Networks for f A rRIusG wireless Print Server he Home Configuration yols Help Print Test Part Selectian Print test function requires Native DOS mode support on your USE printer USE C USB LPT Apply Print Test Click Test to print a test page from the selected USB or parallel port Using the Web Configuration continued Tools gt Email DP G321 A rRIUSG Wireless Print Server uration E mail Account Print Server E mail Address liemnn adelphia net Outgoing E mail SMTP Server Address mail adelphia net Account Narne iemnn Password fo o O Apply Cancel E mail Notification Enable e mail notification for printer status changing C ves No Admin E mail Address liemnnadelphia net Upgrade Use to separate multiple e mail add
4. Port Connectors The DP G321 s two USB ports and parallel port are located on its rear panel The printer port can be configured using the PS Admin program or the print server s Telnet interface See the PS Admin User s Guide available on the CD that came with the DP G321 for information about configuring the print server s ports The Print Server also supports web configuration permitting users to configure settings through the web browser The default IP Address is as follows d Default IP Address 192 168 0 10 E Subnet Mask 255 255 255 0 Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 Front Panel LED Indicators There are two front panel indicators each holding two separate LEDs aligned in a vertical position As shown below the first indicator holds the Power and the USB LED The second indicator holds the Ethernet and WLAN LED Upon boot up the Power light stays on continuously and all other LEDs light up momentarily one by one then turn off Power A steadily lit LED indicates proper operation of the Print Server Link Activity A steadily lit LED indicates proper network connection no lit LED indicates an unsuccessful network con
5. Type a name for this printer Because some programs do not support printer and server At this screen you can input a iso ry Tee chatacters it is best to keep the name as short as name for the printer Click Next Add Printer Wizard Print Test Page To confirm that the printer is installed properly you can print a test page Do you want to print a test page Kes C No Click Next Add Printer Wizard Completing the Add Printer Wizard You have successfully completed the Add Printer Wizard You specified the following printer settings Name Epson Stylus COLOR 740 ESC P 2 Share name lt Not Shared gt Port IP_192 168 0 10 Model Epson Stylus COLOR 740 ESC P 2 Default Yes Testpage No To close this wizard click Finish Click Finish TCP IP Printing for Windows 2000 Open the Web browser and type in the IP Address of the DP G321 For example type http 192 168 0 10 into the Location or Address field Press the Enter or Return Key Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 File Edit Vien 3 r P Favorites JAG p Address http 192 168 0 10 iS Server Name
6. Frequently Asked Questions Q I am unable to establish a connection between my print server and my D Link router A Verify that your connection between both units is good Check for valid link lights on your router and your print server You may be using a bad or incorrect cable Q I am unable to make a wireless connection between my wireless print server and my D Link router A Most wireless connection problems are either caused by distance between your print server and your router or your router may be using WEP encryption For trouble shooting please remove any form of wireless encryption and move the products closer together Q My printer will not print when connected to my print server A Verify that your printer and your print server are compatible Log into the Web based management and use the printing test function under Tools If your printer fails to print the test page then your printer is not compatible with this print server Q My test page prints fine from the Web based management but prints out unreadable text when I try a Windows based test page A Illegible text is caused by incorrect or corrupted drivers 80 of the time Please visit your printer manufactures web page and download the latest print drivers for your OS Q I have another manufacturer s wireless router and can not get the print server to connect A You will need to first change the IP address of your print server to match that IP address scheme
7. High v PJL Printer No o 29 Apply Cancel TCP IP Printing for Windows 98SE Me continued DP G321 3 Wireless Print Server D Link Building Networks for People zA rPlus Home 4 Tools Help Connection Made f Infrastructure C Ad Hoc SSID default Site Survey Wireless Channel 6 Transmission Rate Fully Automatic s Network WEP Encryption Disable 64 bits 128 bits WEF Key Format C ASCI HEX TET Key 1 key 2 3 Key 3 l SNMP i Key 4 Encrypt Data Transmissions Using key _T Beacon Interval 100 ms Preamble f Long Short Authentication Type C Open System Shared Key Both v 9 Apply Cancel Select your Connection Mode Enter the SSID of the remote access point or wireless router to which you wish to connect If you would like to set WEP Encryption select the encryption level and the key here Click Apply TCP IP Printing for Windows 98SE Me continued When you select TCP IP Protocol at the Network window the screen below will appear We recommend that you keep the default settings as shown If you need to make changes make sure to click Apply after you have made the changes You may wish to make a note of the IP address D Link DP G321 AirPlusG Wireless Print Server Home Jure Tools Help Manually Assign TCPAP IP Address
8. PS 400E61 Model DP G321 Firmware Version 1 00b 2004 03 22 MAC Addre OOFF 07 40 0E 61 oem IP Address 192 168 0 10 Manual Up Time days 00 13 20 USB1 Printer Nam PS 400E61 U1 Printer Speed Full Speed 12M bps Printer Stat Offline Total Print Jobs to iii Total Print Size OKBytes Printing Status Idle Name MAC IP Protocol Spooling Size 0 Bytes Printing Size O Bytes LPT Printer Name PS 400E61 P3 Printer Speed 3 High Printer Status q Off line Total Print Jobs Total Print Size 0 KBytes Printing Status E Idle Name MAC IP Protocol Spooling Size 0 Bytes Printing Size D Bytes Ethernet Status Link Yes Speed 100M bps Duplex Yes Tx Packets 407 Tx Errors W Rx Packets 785 Rx Em 0 AirPRIUSG Wireless Print Server Configuration Tools Help A DP G321 TCP IP Printing for Windows 2000 continued At the Configuration window write down the Port Names for future reference You will need this information later in the configuration process Wireless Network User SNMP TULIK Home System Device Server Name Location Admin Contact Password Port Setting USB1 USB2 LPT Tools PS 400E61 DP G321 A rRIUSG wireless Print Server New Password Confirm Again Port Name Description PJL Printer f Port Name Description PJL Printer fPort Name Description Sp
9. Chooser Name PS 400E61 U1 Printer Type flaserWriter PostScript Level Level 2 Font Group Standard 35 Chooser Name PS 400E61 U2 Printer Type llaserWriter PostScript Level Level 2 Font Group Standard 35 Chooser Name PS 400E61 P3 Printer Type a Laserwrter PostScript Level Level 2 Font Group Standard 35 o o9 Apply Cancel Using the Web Configuration continued Configuration gt Network TCP IP This field contains three options that allow you to configure the TCP IP setting IP Address This option allows you to set the IP address manually or automatically When you choose Manually Assign you should enter the related information in the following boxes including IP Address Subnet Mask and Default Gateway DNS Server Address Input the DNS Domain Name Server IP address provided by your ISP These entries must be filled to enable E mail base printing UPnP This option allows you to enable or disable UPnP mode MAC Rendezvous This option allows you to enable or disable MAC Rendezvous mode Second HTTP Port Select Enable or Disable Port Number Enter the Port Number if you have enabled the Second HTTP Port For remote Web configuration and IPP printing Microsoft Network Enter the name of the Workgroup that you want the print server associated with in this field AppleTalk Enter the Apple Talk Zone name in the box In the following opti
10. Configuration Tools l Help PS 400E61 Model DP 6321 Firmware Version 1 00b 2004 03 22 MAC Address DOFF 07 40 0E 61 IP Address 192 158 0 10 Manual Up Time 0 days 00 13 20 Printer Statu USB1 Printer Name PS 400E61 U1 Printer Speed Full Speed 12M bps Printer Status Offline Total Print Jobs Total Print Size OKBytes Printing Status Idle Nam MAC IP Protocol Spooling Size O Bytes Printing Size 0 Bytes LPT Printer Name PS 400E61 P3 Printer Speed A High Printer Status i Off line Total Print Jobs 0 Total Print Size A 0 KBytes Printing Status Idle Nam MAC IP Protocol Spooling Size 0 Bytes Printing Size D Bytes Ethernet Status Link Yes Speed 100M bps Duplex Yes TCP IP Printing for Windows 98SE Me continued At the Configuration window write down the Port Names for future reference You will need this information later in the configuration process The Port Name shown here is only an example System Device Server Name Location Admin Contact Password Port Setting USB1 USB2 LPT A rRIUSG wireless Print Server Home New Password Port Name PS 400E61 U1 DP G321 Tools Help PS 400E61 Confirm Again Description PJL Printer No PS 400E61 U2 Description PJL Printer No Description Speed
11. DNS Server Address 1 42 22 sie 0 0 0 0 UPnP Enable C Disable MAC Rendezvous Enable Disable Second HTTP Port C Enable Disable Port Number 0 For Remote Web Configuration and IPP Printing Microsoft Network Workgroup WORKGROUP AppleTalk AppleTalk Zone F USB1 Chooser Name P8S 400EB1 U1 Printer Type LaserWriter PostScript Level Level 2 J Font Group Standard 35 v USB2 Chooser Name PS 400E61 U2 Printer Type LaserWriter PostScript Level Level 2 v Font Group Standard 35 v LPT Chooser Name PS 400E61 P3 Printer Type LaserWriter PostScript Level Level 2 Font Group Standard 35 v o O9 Apply Cancel TCP IP Printing for Windows XP continued Printers and Faxes Go to Start Settings Printers and Faxes File Edit View Favorites Tools Help Add a Printer e p Back gt 3 r Search Address 44 Printers and Faxes Printer Tasks s Add a printer See Set up Faxing Start the Add Printer Wizard Add Printer Wizard Welcome to the Add Printer Wizard This wizard helps you install printer or make printer connections X If you have a Flug and Play printer that connects 1 through a USE port or any other hot pluggable port such as IEEE 1394 infrared and so on you do nat need to use this wizard Click Cancel to close the wizard and then plug the printer s cable Into pour comput
12. Total Print Jobs Total Print Size Status Total Print Jobs Total Print Size Status Total Print Jobs Total Print Size DP G321 A rPIusG Wireless Print Server Tools Help Disable IP 0 0 0 0 Enable P 192 168 0 106 Enable IP 169 254 14 97 Running RU 0 KBytes Running in D KBytes Running 2 20 KBytes Running H 0 KBytes Running 0 0 KBytes gt Running 0 O KBytes Running D 0 KBytes Running 0 0 KBytes Refresh Using the Web Configuration continued Home gt User Click the User button in the left column to display the user s information DP G321 A rRIUSG Wireless Print Server System Wireless Hetwork i o Users Printing Log The items in this field display the user s information which include the user s Mac address IP address name and status of printing tasks Using the Web Configuration continued Configuration Click on the Configuration tab from the tools bar of the main screen to enter the configuration page it provides the configuration options that include System Device and Port Setting System Device and Port Setting This option will show you settings required to configure the DP G321 Print Server Consult your printers owner manual for the PJL Printer Job Language and print speed supported on your printer Click the Save button on the bottom of the configuration page to ensure the settings are
13. 98SE Mac OS with AppleTalk or Linux m A computer or a network of computers with wireless capability M Internet Explorer 6 0 or Netscape Navigator version 6 0 or above with JavaScript enabled m The printer must support the required Operating System 5 wire rat power server Introduction The D Link DP G321 Print Server is an 802 119 wireless Multi Port Print Server that allows you to connect your USB printer or parallel printer directly to your network Now you can locate printer services virtually anywhere in your home or office The DP G321 manages the flow of print files from workstations or file servers to connected printers delivering print jobs to printers much faster than a file server on a PC The DP G321 includes easy to use software to install on most Windows based networks Protocol support for TCP IP NetBEUI and AppleTalk are provided to ensure seamless connection to major networking operating systems The DP G321 has a built in Web based management feature that allows users to easily configure and manage print queues through TCP IP The DP G321 provides a 10 100Mbps auto sensing Ethernet port allowing flexible attachment to either 10BaseT or 100BaseTX networks With two USB 2 0 ports and one standard parallel port the DP G321 is an ideal wireless high speed Print Server for a home or office that has multiple printers The DP G321 improves network printing services in the following ways m The DP G3
14. Encryption This option allows you to select Disable 64 bit and 128 bit for encryption setting WEP Key Format You can decide the network key to be encoded by ASCII ASCII characters or HEX hexadecimal digitals 64 bit WEP encryption uses a 10 hexadecimal character key The WEP encryption key must match the WEP settings on your AP or wireless router to connect properly Then enter the key s for the network in the Key box 1 4 Advanced Setting Beacon Interval Enter the number for the beacon interval in milliseconds Preamble This option allows you to set the length of the preamble Setting options are DI Long set to 144 bits Ej Short set to 72 bits Authentication Type You can set the authentication type by selecting the settings Open System Shared Key and Both Using the Web Configuration continued Network D Link System Wireless User SNMP Tie Home TCPAP IP Address DNS Server Address UPnP MAC Rendezvous Second HTTP Port Microsoft Network Workgroup AppleTalk AppleTalk Zone USB1 USB2 LPT DP G321 AirPiusG Wireless Print Server Tools Help Manually Assign IP Address 192 158 0 10 Subnet Mask 255 255 255 0 Default Gateway 192 168 0 1 C Automatically Assign 1 42 22 F 0 0 0 0 Enable C Disable Enable C Disable C Enable Disable Port Number o For Remote Web Configuration and IPP Printing WORKGROUP
15. Favorites Tools Advanced Help Ox gt O P Bree m Networking Basics continued Assigning a Static IP Address in Windows XP 2000 The DNS server information will be supplied Click Internet Protocol TCP IP Click Properties Select Use the following IP address in the Internet Protocol TCP IP Properties window Input your IP address and subnet mask The IP addresses on your network must be within the same range For example if one computer has an IP address of 192 168 0 2 the other computers should have IP addresses that are sequential like 192 168 0 3 and 192 168 0 4 The subnet mask must be the same for all the computers on the network Input your DNS server addresses Note If you are entering a DNS server you must enter the IP address of the Default Gateway by your ISP Internet Service Provider Click OK Local rea Connection 7 Properties General Advanced o Connect using E D Link DWL A650 This connection uses the following items wi el Client for Microsoft Networks vi ie File and Printer for Microsoft Networks Install Description Transmission Control Protacal Intemet Protocol The default wide area network protocol that provides communication across diverse interconnected networks Show icon in notification area when connected ok cere Ea tei ternet Protocol TCP IP Properties General You can get IP
16. IS WITH THE PURCHASER OF THE PRODUCT Limitation of Liability TO THE MAXIMUM EXTENT PERMITTED BY LAW D LINK IS NOT LIABLE UNDER ANY CONTRACT NEGLIGENCE STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT INCONVENIENCE OR DAMAGES OF ANY CHARACTER WHETHER DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF GOODWILL LOSS OF REVENUE OR PROFIT WORK STOPPAGE COMPUTER FAILURE OR MALFUNCTION FAILURE OF OTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D LINK S PRODUCT IS CONNECTED WITH LOSS OF INFORMATION OR DATACONTAINED IN STORED ON OR INTEGRATED WITHANY PRODUCT RETURNED TO D LINK FOR WARRANTY SERVICE RESULTING FROM THE USE OF THE PRODUCT RELATING TO WARRANTY SERVICE OR ARISING OUT OF ANY BREACH OF THIS LIMITED WARRANTY EVEN IF D LINK HAS BEENADVISED OF THE POSSIBILITY OF SUCH DAMAGES THE SOLE REMEDY FORABREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR REPLACEMENT OR REFUND OF THE DEFECTIVE OR NON CONFORMING PRODUCT THE MAXIMUM LIABILITY OF D LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASE PRICE OF THE PRODUCT COVERED BY THE WARRANTY THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES EXPRESS IMPLIED OR STATUTORY Governing Law This Limited Warranty shall be governed by the laws of the State of California Some states do not allow exclusion or limitation of incidental or consequential
17. LED Faulty Component low speed flashing Need to reload firmware steady ON DRAM error Flash Erase Program error 1long 16 short Wireless LAN card CIS error 1long 17short Wireless LAN card I O error 1long 15 short Wireless LAN card detect error Using the Web Configuration Please use an Ethernet connection for the configuration of the DP G321 Using a CATS cable connect the DP G321 to the Ethernet adapter equipped computer in your network that you will be using for configuration Open your web browser and type http 192 168 0 10 in the address box and press Enter This set of numbers is the default IP Address of your Print Server Please note that the PC s IP Address must correspond with the Print Server s IP Address in the same segment for the two devices to communicate File Edit View Favorites Tools Help T in gt JAG gt When you enter the default IP address the main screen of the Print Server s con figuration will appear see below In addition to the product information you can access and control the Print Server s configuration through four links on the top of this main screen Home Configuration Tools and Help s D Link REX A frPiusG wireless Print Server pum EET NT Device Stati Server Name PS 400E61 Model DP 6321 Firmware Version 1 00b 2004 03 22 MAC Address OOFF 07 40 0E 61 IP Address 192 168 0 10 Manual Up Time 0 days 00 13 20 Printer Stati USB1 Printer
18. Name PS 400E61 U1 Printer Speed Full Speed 12M bps Printer Status Offline Total Print Jobs D Total Print Size 0 KBytes Printing Status Idle Name MAC IP Protocol Spooling Size 0 Bytes Printing Size 0 Bytes LPT PrinterName PS 400E61 P3 Printer Speed i Printer Status Off line Total Print Jobs 0 Total Print Size 0 KBytes Printing Status Idle Name MAC IP Protocol Spooling S 0 Bytes Printing S 0 Bytes Ethernet Stat Link Yes Speed 100M bps Duplex Yes Tx Packets 407 Tx Errors 0 Rx Packets 785 Rx Errors 0 Refresh Using the Web Configuration continued Home Click on the Home tab from the tools bar of the main screen to display information about the DP G321 s System Status and Printer Status Home gt System As shown here the System displays the status of your print server printer and network Clicking Refresh will update the information Device Status Information about the print server including the firmware version MAC IP address and the up time can be found in this field Printer Status The items in this field display information about the printer such as the given name of the printer speed printer status and the status of your printing tasks etc Wireless AirPlusG Wireless Print Server DP G321 Configuration Tools Help Device Status Server Name PS 400E61 Model DP 6321 Firmware Version 1 00b 2004 03 22 MA
19. Network Properties Page Highlight LPR for TCP IP Printing The following network components are installed Click Properties Primary Network Logon Microsoft Family Logor File and Print Sharing Description TCP IP Printing for Windows 98SE Me continued LPR for TCP IP Printing Properties Ports Settings Port List Click Add Port Add Port Delete Part Cancel i Type in the IP Address of the DP G321 Make sure IP Address 192 168 0 10 the Port Name is accu rate The Port Name at Port Name right is just an example fans Click OK X Cancel LPR for TCP IP Printing Properties Ports Settings The Port name and IP dpi Address will be displayed The Port Name at right is just an example 1192 168 0 101P5 116683 01 Add Port Delete Port Click OK Cancel TCP IP Printing for Windows 98SE Me continued Hetwork Ei Ei Configuration Identification Access Control The following network components are installed mi Client for Microsoft Networks mi LPR for TCP IP Printing m Microsoft Family Logan D Link ArPlus treme G D vVvL GERI Dial Up Adapter F H i Remove Properties Primary Network Lagar Microsoft Family Logon File and Print Sharing Description Click OK Cancel Windows will ask for E AGE OIE ei a restart Youmust restart your computer before the new settings will ta
20. in conjunction with any other antenna or transmiter Register your D Link product online at http support dlink com register 06 15 04 Appendix DP G321 Printer Compatibility List For Windows The Canon Printer Canon BJC 55 85 Canon S100SP Canon S200SP Canon S300 Canon S330 Canon S400SP Canon S450 Canon S520 Canon S600 Canon S750 Canon 54500 Canon S6300 Canon S9000 The Epson Printer Epson Stylus Color 900 Epson Stylus Color 1160 Epson Stylus Color 2200 Epson Stylus Photo 720 Epson Stylus Photo 810 820 830 890 Epson Stylus Photo 900 Epson Stylus Photo 1280 1290 Epson Stylus C41UX C405 C42UX Epson Stylus C60 C61 C62 Epson Stylus C80 C82 The Lexmark Printer Lexmark Z13 Lexmark Z25 Lexmark Z33 Lexmark Z35 Lexmark Z43 Lexmark Z45 Lexmark Z53 The HP Printer HP DeskJet 640C 656C HP DeskJet 845C HP DeskJet 920C HP DeskJet 948C HP DeskJet 960C HP DeskJet 990Cxi 995C HP DeskJet 1125C 1180C HP DeskJet 1220C HP DeskJet 3320 HP DeskJet 3420 3425 HP Color Inkjet CP1700 HP LaserJet 1200 HP LaserJet 2200 2200d Appendix DP G321 Printer Compatibility List for Windows continued The Lexmark Printer Lexmark 4039 10R Lexmark 5700 Lexmark Optra Color 45 Lexmark Optra C710 Lexmark Optra E E E310 Lexmark Optra K1220 Lexmark Optra M410 M412 Lexmark Optra N Lexmark Optra R Lexmark Optra 51250 51855 Lexmark Optra SC 1275 Lexmark Optra SE 3455 Lexmark Optra T614
21. of your wireless router Ex D Link uses 192 168 0 x for its default IP scheme Where x is a number between 2 to 254 Run PS Admin from a Windows based PC This will allow you to connect to the print server and change its default IP from 192 168 0 10 to something that matches your wireless network For testing connections make sure that you disable any WEP encryption on the wireless router Q I plug in my USB printer but the USB light does not turn on A Please be aware that your USB light will only illuminate when traffic is being passed across the USB port If you would like to make sure that your printer is being detected by the print server log into the Web based management and check the printer status Technical Support You can find software updates and user documentation on the D Link website D Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product U S and Canadian customers can contact D Link technical support through our website or by phone Tech Support for customers within the United States D Link Technical Support over the Telephone 877 453 5465 24 hours a day seven days a week D Link Technical Support over the Internet http support dlink com email support dlink com Tech Support for customers within Canada D Link Technical Support over the Telephone 800 361 5265 Monday to Friday 8 30am to 9 00pm
22. only replace the defective portion of the Product and will not ship back any accessories fl The customer is responsible for all in bound shipping charges to D Link No Cash on Delivery COD is allowed Products sent COD will either be rejected by D Link or become the property of D Link Products shall be fully insured by the customer and shipped to D Link Systems Inc 17595 Mt Herrmann Fountain Valley CA 92708 4160 D Link will not be held responsible for any packages that are lost in transit to D Link The repaired or replaced packages will be shipped to the customer via UPS Ground or any common carrier selected by D Link with shipping charges prepaid Expedited shipping is available if shipping charges are prepaid by the customer and upon request D Link may reject or return any product that is not packaged and shipped in strict compliance with the foregoing requirements or for which an RMA number is not visible from the outside of the package The product owner agrees to pay D Link s reasonable handling and return shipping charges for any product that is not packaged and shipped in accordance with the foregoing requirements or that is determined by D Link not to be defective or non conforming What Is Not Covered This limited warranty provided by D Link does not cover Products if in D Link s judgment have been subjected to abuse accident alteration modification tampering negligence misuse faulty installation lack of reaso
23. printer to install the printer drivers Click Next Add Standard ICP7IP Printer P Additional Port Information Required I The device could not be identified The detected device is of unknown type Be sure that 1 The device is properly configured 2 The address on the previous page is correct Either correct the address and perform another search on the network by retuming to the previous wizard page or select the device type if you are sure the address is correct Device Type Standard Oo ene Configure Standard ICP IP Part Port Settings Part Mame 1P192 168 010 Pinter Maree of VP dana 192 158 0 10 Protocol C2 Raw e LPR qae Piani ae L LPR Byte Counting Enabled _ SNMP Status Enabled Add Printer Wizard Install Printer Software VA The manufacturer and model determine which printer software to use T X Select the manufacturer and model of your printer If your printer came with an installation Sa disk click Have Disk If your printer is not listed consult your printer documentation for compatible printer software W Epson Stylus COLOR 760 ESC P 2 Sl Epson Stylus COLOR 777 ESC P 2 SH Epson Stylus COLOR 800 ESC P 2 iix A o ema mm are enm im c v GF This driver is digitally signed Windows Update a go ape gap __Cancel 37 TCP IP Printing for Windows XP continued Add Printer Wizard Name Your Printer 7 You must assign a name to this printer SP
24. settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically IP address Subnet mask Use the following DNS server addresses Preferred DNS server 132 Alternate DNS server Technical Specifications Printer Connection Printer Port USB 2 0 or Parallel Bidirectional Communication Hewlett Packard PJL Printer Job Language standard for bidirectional communication Network Connection Network Standards IEEE 802 3 10Base T Ethernet IEEE 802 119 Wireless Standard Network Data Transfer Rate 10 100 Mbps megabits per second up to 54Mbps Network Connector CAT5 cable Network Protocols Ethernet Frame Types 802 2 802 3 Ethernet Il SNAP auto switching Transport Protocols TCP IP NetBEUI AppleTalk EtherTalk LPR SMB TCP IP Protocols Supported BOOTP SNMP Telnet TFTP FTP LPD RARP DHCP IPP Management and Diagnostics Standard SNMP MIBs MIB Il RFC 1213 Diagnostic LED Indicators Power LAN USB WLAN Environmental and Physical Power Supply External power supply providing 5V 2 5A DC Dimensions 3 54 x 3 19 x 1 57 90mm x 81mm x 40mm Weight approx 5 19 oz 1479 Operating Temperature 32 t0122 F 0 to 50 C Storage Temperature 13 to 131 F 25 to 55 C Humidity 5 to 95 non condensing Emissions FCC Class B CE Class B VCCI Class B
25. using it If your network is not divided into zones the AppleTalk Zone field should contain a single asterisk Printing from Mac OS Client Workstations The exact procedure for selecting a PostScript printer connected to your Print Server may vary slightly depending on what printer driver version you are using The procedure described below assumes you are using the LaserWriter 8 To choose a printer connected to your Print Server as your Mac OS workstation s default printer Open the Chooser by selecting Chooser from the Apple menu Select the LaserWriter 8 icon on the left Make sure that AppleTalk is set to Active A list of all networked PostScript printers will be displayed Chooser Select a Postscript Printer Double click the name of el e PS 116688 U1 the Printer Port you wish i MEE es to use The Printer Ports e shown are examples only LaserWriter 300 LS Laser writer 8 fan Prev ig Tr i Active 3 Inactive AppleTalk Printing from Mac OS Client Workstations continued If you have not previously set this printer as the default your computer Current Printer Description File PPD Selected Generic von fre PostScript Printer Description file Choose Select PPD 1 gt gt Select the appropriate _ _ _ printer description file for 3 Printer Descriptions your printer TEE nee mete CE HP L
26. 21 delegates print jobs to the network printer This provides workload relief to your file servers and allows the file servers full capacity to be used for file access or other direct services to network users On peer to peer networks workstations can print directly to the Print Server without increasing the load of another workstation or server M The DP G321 s USB 2 0 ports can transmit data to high speed laser printers much faster than a PC s parallel printer port With a separate parallel port you will still have the option to use a standard parallel printer with the DP G321 E Because the DP G321 is very portable and inexpensive compared to a PC based print server and the Print Server connects to your file servers through the network printers can be deployed to locations of maximum convenience to users The DP G321 offers extraordinary flexibility operating with all major network operating systems and protocols TCP IP UNIX lpr lpd Windows NT 2000 Windows 95 98SE Me Windows XP NetWare 5 x NDPS LPR Remote Printing ri NetBEUI Windows 2000 XP Windows 95 98SE Me Microsoft LAN Manager IBM LAN Server E AppleTalk MacOS EtherTalk Windows based setup and administration software PS Admin is supplied with the Print Server making configuration and management quick and easy The Print Server also supports configuration and management via the Telnet protocol for networks without Windows compatible systems External Features
27. AC Rendezvous Enable Disable Second HTTP Port Enable Disable Port Number 0 For Remote Web Configuration and IPP Printing SNMP Microsoft Network Workgroup WORKGROUP AppleTalk AppleTalk Zone EF USB1 Chooser Name PS 400E61 U1 Printer Type LasehWriter PostScript Level Level 2 Font Group Standard 35 USB2 Chooser Name PS 400E61 U2 Printer Type LasehWriter PostScript Level Level 2 Font Group Standard 35 EPT Chooser Name PS 400E61 P3 Printer Type a Lase wrter PostScript Level Level 2 Font Group Standard 35 o o9 Apply Cancel When you select TCP IP Protocol at the Network window the screen below appears We recommend that you keep the default settings as shown If you need to make changes make sure to click Apply after you have made the changes You may wish to make a note of the IP Address TCP IP Printing for Windows 2000 continued Go to Start gt Settings gt Lg Printers 2 a a Cut Copy Faste Double click on the Add Printer icon E rinters Add Printer The Add Printer wizard walks you step by step through installing printer Just follow the Instructions on each screen NE i xi Welcome to the Add Standard TCP IP Printer Port Wizard You use this wizard to add a port for a network printer Before continuing be sure that 1 The device is turned on 2 The network iz c
28. C Address DOFF 07 40 0E 61 IP Address 182 158 0 10 Manual Up Time D days 00 13 20 Printer Status USB1 Printer Name PS 400E61 U1 Printer Speed Full Speed 12M bps Printer Status Offline Total Print Jobs z W Total Print Size D KBytes Printing Status Idle Name MAC IP Protocol Spooling Size O Bytes Printing Size 0 Bytes LPT Printer Name PS 400E61 P3 Printer Speed High Printer Status Off line Total Print Jobs D Total Print Size 0 KBytes Printing Status Idle Name MAC IP Protocol Spooling Size D Bytes Printing Size D Bytes Ethernet Status Link Yes Speed 100M bps Duplex Yes Tx Packets 407 Tx Errors 7 lt 0 Rx Packets 785 Rx Errors D h Ethernet Status You can monitor the networking status in this field including the network connection speed and the packets status Using the Web Configuration continued Home gt Wireless Click the Wireless button in the left column to display information about the wireless LAN Clicking Refresh will update the information D Link mar AirPlusG Wireless Print Server z EE Wireless Status Tools d Helps Connection Mode Infrastructure Link Yes SSID default MAC 00 OD 88 65 13 8F Channel d Transmission Rate 54M bps WEP Encryption Disable Tx Packets 460 Tx Errors m di Rx Packets 1012 Rx Errors amp UJ Refresh Wireless Status The items in this field display infor
29. D Link DP G321 AirPlus G Wireless Print Server Manual D Link Building Networks for People Contents Package Contents EE MA 9 INIOGUCIO 4 MESSE 8 Installation Considerations ona tied Soi out ut Mun ead 9 Seting WO the DP G32T 10 Power On Self T T 11 Using the Web Fre 12 TCP IP Printing for Are OE GE NR 30 TCP IP Printing for Windows 2000 39 TCP IP Printing for Windows 98SE Me 49 Unix Linux Printing See PS Admin Manual on CD ROM 61 Setting up AppleTalk or LPR Printing in MAC OSX 62 Setting up Apple Talk Printing in MAC OSS 67 Printing from Mac OS Client Workstation 68 INST WORKING BASIC pini 70 Technical Specifications EN 82 Frequently Asked Questions cst etu it io epson 83 Contacting Technical Support eese cse enean 84 Warranty and Registration EE uU DUI Ed eus 95 Appendix DP G321 Printer Compatibility LISt cc eeeeeeeeeeeeees 88 Package Contents Contents of Package m D Link DP G321 Wireless Multi port Print Server m Manual and Warranty on CD m Printed Quick Installation Guide If any of the above items are missing please contact your reseller System Requirements A computer with an installed Ethernet adapter for initial configuration purposes only Windows XP 2000 Me
30. EST D Link Technical Support over the Internet http support dlink ca email support dlink ca When contacting technical support please provide the following information e Serial number of the unit e Model number or product name e Software type and version number Warranty and Registration Subject to the terms and conditions set forth herein D Link Systems Inc D Link provides this Limited warranty for its product only to the person or entity that originally purchased the product from fi D Link or its authorized reseller or distributor and fl Products purchased and delivered within the fifty states of the United States the District of Columbia U S Possessions or Protectorates U S Military Installations addresses with an APO or FPO Limited Warranty D Link warrants that the hardware portion of the D Link products described below will be free from material defects in workmanship and materials from the date of original retail purchase of the product for the period set forth below applicable to the product type Warranty Period except as otherwise stated herein 1 Year Limited Warranty for the Product s is defined as follows fl Hardware excluding power supplies and fans One 1 Year fl Power Supplies and Fans One 1 Year ll Spare parts and spare kits Ninety 90 days D Link s sole obligation shall be to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner
31. Lexmark Optra W810 Lexmark Z53 Other printers from the brands listed above may also be supported For an updated compatibility list please visit http www support dlink com
32. Printer No Mi o O9 Apply Cancel TCP IP Printing for Windows XP continued DP G321 AirPlusG wireless Print Server Home j Toos Help Wireless Interface Connection Mode f Infrastructure Ad Hoc aep default Wireless Channal Transmission Rate Fully Automatic WEP Encryption tun i i Network WEP Encryption Disable 64 bits 128 bits WEP Key Format ASCII HEX vid i Key 2 p Key 3 SNMP x Key 4 i Encrypt Data Transmissions Using Fey 1 Beacon Interval 100 ms Preamble Long Short Authentication Type Open System Shared Key Both Select your Connection Mode Enter the SSID of the remote access point or wireless router you wish to connect to If you would like to set WEP Encryption select the encryption level and the key here Click Apply TCP IP Printing for Windows XP continued When you select TCP IP Protocol at the Network window the screen below appears We recommend that you keep the default settings as shown If you need to make changes make sure to click Apply after you have made the changes You may wish to make a note of the IP address D Link DP G321 AirPlusG Wireless Print Server Home iguratic Tools Help gt TCPAP IE aderess 16 Manually Assign IP Address 192 168 010 Subnet Mask 255 255 255 0 System Default Gateway 192 168 0 1 automatically Assign
33. aserJet 4ML 5 7 01 B Click Open EP HP LaserJet AMP 5 7 01 If your printer is not listed E HP LaserJet 4MP 300 dpi 5 7 01 lick G Ug HP LaserJet 45i 300 dpi 5 7 01 Cic eene to use a J HP LaserJet 45i v2011 110 5 7 01 generic printer HP LaserJet av 5 7 01 B description 5 Use the Generic Post cript Printer Description file cancer Joven _ If you wish to access this setting in the future you can use the Setup button in the Chooser window The selected printer will become your computer s default printer You may need to choose Page Setup in any applications you have open Networking Basics Using the Network Setup Wizard in Windows XP In this section you will learn how to establish a network at home or work using Microsoft Windows XP Note Please refer to websites such as http www homenethelp com and http www microsoft com windows2000 for information about networking computers using Windows 2000 ME or 98SE Go to Start Control Panel Network Connections Network Setup Wizard Welcome to the Network Setup Wizard This wizard will help you set up this computer to run om your network With a network pou can Share an Internet connection Set up Internet Connection Firewall Share files and folders Share a printer To continue click Next When this screen appears click Next Networking Basics continued Network Setup Wizard Please follow all the instructions in this window
34. be used for network communications over standard Ethernet or Fast Ethernet using the EtherTalk transport or over a proprietary low speed LocalTalk transport Your Print Server can be used for network printing to PostScript printers You can print from any MacOS computer connected to your Ethernet network either directly using an EtherTalk connection or indirectly through a Local Talk to Ether Talk router NOTE The Chooser name of a printer connected to one of the Print Server s ports is the same as its Port Name If you are using Apple Talk printing you will need to make sure that every Port Name is unique among all of the network printers in your Apple Talk zone The Port Names shown in this manual are examples only Setting up the Print Server for AppleTalk Printing To set up your Print Server so that it can be used for Apple Talk printing m Make sure the Apple Talk protocol is enabled in your Macintosh m Change the IP address on one of the computers on your network to 192 168 0 x where x is any number between 11 254 m Type 192 168 0 10 into the address field of your Web browser 192 168 0 10 is the default IP Address of the DP G321 m Select the Network tab and scroll to the bottom to the AppleTalk protocol section m If your AppleTalk network is divided into Apple Talk zones you will have to specify which zone the Print Server should be in You should locate the Print Server in the same zone as most of the users who will be
35. cted and configured To continue click Next TCP IP Printing for Windows XP continued Add Standard TCP IP Printer Port Wizard xj Type in the IP address of NNN ipae the Print Server i e Enter the Printer Name or IP address and a port name for the desired device 192 168 0 10 The Port a iii fint Name will automatically b id AEE be filled in Add Standard TCP IP Printer Port Wizard Additional Port Information Required The device could not be identified The detected device is of unknown type Be sure that 1 The device is ed 2 The address on the previous page is correct Either correct the address and perform another search on the network by returning to the previous wizard page or select the device type if you are sure the address is correct oelect Custom an Then click Settings Standard TS Configure Standard TCP IP Pi mM Port Settings Port Name IP 192 168 010 Printer Name or IP Address 192 168 010 Protocol Select LPR O Raw Raw Settings Input the Port Name of APR Settings the port being used by the printer PS 116688 U1 LPR Byte Counting Enabled SNMP Status Enabled Click OK 36 TCP IP Printing for Windows XP continued Click Next Click Finish Highlight the printer as shown If the desired printer is not on the list click Have Disk and insert the printer driver disk that came with your
36. damages or limitations on how long an implied warranty lasts so the foregoing limitations and exclusions may not apply This limited warranty provides specific legal rights and the product owner may also have other rights which vary from state to state Trademarks D Link is a registered trademark of D Link Systems Inc Other trademarks or registered trademarks are the property of their respective manufacturers or owners Copyright Statement No part of this publication or documentation accompanying this Product may be reproduced in any form or by any means or used to make any derivative such as translation transformation or adaptation without permission from D Link Corporation D Link Systems Inc as stipulated by the United States Copyright Act of 1976 Contents are subject to change without prior notice Copyright 2002 by D Link Corporation D Link Systems Inc All rights reserved CE Mark Warning This is a Class B product In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with th
37. e instructions may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with a minimum distance of about 8 inches 20cm between the radiator and your body This transmitter must not be co located or operated
38. eceives data with radio signals instead of wires WLANSs are used increasingly in both home and office environments and public areas such as airports coffee shops and universities Innovative ways to utilize WLAN technology are helping people to work and communicate more efficiently Increased mobility and the absence of cabling and other fixed infrastructure have proven to be beneficial for many users Wireless users can use the same applications they use on a wired network Wireless adapter cards used on laptop and desktop systems support the same protocols as Ethernet adapter cards People use wireless LAN technology for many different purposes Mobility Productivity increases when people have access to data in any location within the operating range of the WLAN Management decisions based on real time information can significantly improve worker efficiency Low Implementation Costs WLANSs are easy to set up manage change and relocate Networks that frequently change can benefit from WLANs ease of implementation WLANSs can operate in locations where installation of wiring may be impractical Installation and Network Expansion Installing a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings Wireless technology allows the network to go where wires cannot go even outside the home or office Scalability WLANs can be configured in a variety of topologies to meet the needs o
39. ed on approved hardware and operated as contemplated in its documentation D Link further warrants that during the Warranty Period the magnetic media on which D Link delivers the Software will be free of physical defects D Link s sole obligation shall be to replace the non conforming Software or defective media with software that substantially conforms to D Link s functional specifications for the Software or to refund at D Link s sole discretion Except as otherwise agreed by D Link in writing the replacement Software is provided only to the original licensee and is subject to the terms and conditions of the license granted by D Link for the Software Software will be warranted for the remainder of the original Warranty Period from the date or original retail purchase If a material non conformance is incapable of correction or if D Link determines in its sole discretion that it is not practical to replace the non conforming Software the price paid by the original licensee for the non conforming Software will be refunded by D Link provided that the non conforming Software and all copies thereof is first returned to D Link The license granted respecting any Software for which a refund is given automatically terminates Non Applicability of Warranty The Limited Warranty provided hereunder for hardware and software of D Link s products will not be applied to and does not cover any refurbished product and any product purchased through the inventor
40. eed PJL Printer PS 400E61 P3 PS 400E61 U1 No wj PS 400E61 U2 High DI No vi o 29 Apply Cancel TCP IP Printing for Windows 2000 continued D Link gavn Building Networks for People AirPlus S Wireless Print Server Home Tools 1 Help i utens tota Connection Mode Infrastructure C Ad Hoc S8ID defaut Site Survey gt Wireless Channel E Fully Automatic Transmission Rate Network WEP Encryption Disable 64 bits 128 bits WEP Key Format ace HEX Key 1 DEBES u e Ker _ lar Key 4 EEE Encrypt Data Transmissions Using Key 1 Beacon Interval io gt ims Preamble Long Short Authentication Type C Open System Shared Key Both Select your Connection Mode Enter the SSID of the remote access point or wireless router to which you wish to connect If you would like to set WEP Encryption select the encryption level and the key here Click Apply TCP IP Printing for Windows 2000 continued DP G321 AirPiusG Wireless Print Server Manually Assign TCPAP IP Address IP Address 192 168 010 Subnet Mask 255 255 255 0 System Default Gateway 192 168 0 1 Automatically Assign Wirel m DNS Server Address 1 12 22 2 0 0 0 0 UPnP Enable C Disable M
41. er ar point the printer toward your computer s infrared port and turn the printer an Windows will automatically install the printer for vau To continue click Next Click Next ON i Cancel TCP IP Printing for Windows XP continued Select Local Printer Add Printer Wizard Local or Network Printer 74 The wizard needs to know which type of printer to set up GH Deselect Automatically detect and install my Plug and Play printer Click Next Select Create a new port At the pull down menu highlight Standard TCP IP Port Click Next Click Next C A network printer or a printer attached to another computer Tosetup a network printer that is not attached to a print server 1 use the Local printer option Add Printer Wizard 7 Select a Printer Port Computers communicate with printers through ports Select the port you want your printer to use If the port is not listed you can create a new port C Use the following port LETI Recommended Panter Port Note Mast computers use the LPT 1 port ta communicate witha local printer The connector for this port should look something like this Vr a cy Create a new port Type of port CAI Welcome to the Add Standard TCP IP Printer Port Wizard You use this wizard to add a port for a network printer Before continuing be sure that 1 The device is tumed on 2 The network is conne
42. er name Your Windows based programs will use this printer as the default printer lt Back Finish Cancel After your preter amp ritalad windows can pint a lest page so pou can conlim thet the parte ic sel up properly Would pou kke to par beet page Select Yes to print a test page Yes recommended l No Click Finish Go to Start gt Settings Printers J Printers Check to see that your File Edit View Go Favorites Help printer is installed EM y Back Eomsard Up Cut Copy Faste Address a Printers E gt Add Printer EPSON Stylus COLOR 740 Printers Add Printer The Add Printer wizard walks you step by step through installing printer Just follow the Instructions on each screen Unix Linux Printing Please refer to the PS Admin Manual on the CD included with your purchase for information on setting up the Print Server in Unix Linux Setting up Apple Talk or LPR Printing in Mac OS X With Mac OSX you can use Apple Talk or LPR printers using IP protocols for printing through Print Servers Follow the instructions below for setting up the Print Server After attaching the Print Server to your network using the directions provided in the Quick Installation Guide change the IP address of your Macintosh to access the Print Server s web configuration Open your System Preferences window and Click Network At the Configure pull do
43. ext Baci Network Setup Wizard Insert a disk into the Floppy Disk Drive in Insert the disk you want to use this case drive A Insert a disk the into the following disk dive and then click Next 34 Floppy A If you want to format the disk click Format Disk oma Dik Format the disk if you wish and click Next Networking Basics continued Please wait while the Network Setup Wizard copies the files F z m m T l EL n Please wait while the wizard copies Files Please read the information under Here s how in the screen below After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network To continue click Next H PT r k iT LI D Wiza oO To run the wizard with the Nety gt Complete the wizard and restart this computer Then use the Network Setup Disk to run AJ the Network Setup Wizard ance on each of the other computers on pour network Here s how 1 Insert the Network Setup Disk into the nest computer you want to network 2 Open My Computer and then open the Network Setup Disk 3 Double click netsetup Networking Basics continued Metwork Setup Wizard Completing the Network Setup Wizard Tou have successfully set up this computer for home or small office networking For help with home or small office networking see the following topics in Help and Suppor
44. f specific applications and installations Configurations are easily changed and range from peer to peer networks suitable for a small number of users to larger infrastructure networks to accommodate hundreds or thousands of users depending on the number of wireless devices deployed Inexpensive Solution Wireless network devices are as competitively priced as conventional Ethernet network devices Wireless Basics cont Standards Based Technology Based on the IEEE 802 11g standard the DP G321 is interoperable with existing compatible 2 4GHz wireless technology with data transfer speeds of up to 54Mbps when used with other D Link AirPlus G devices Installation Considerations The D Link AirPlus G DP G321 lets you print through your network using a wireless connection from virtually anywhere within its operating range Keep in mind however that the number thickness and location of walls ceilings or other objects that the wireless signals must pass through may limit the range Typical ranges vary depending on the types of materials and background HF radio frequency noise in your home or business The key to maximizing wireless range is to follow these basic guidelines 1 Keepthe antenna of the DP G321 in an upright position 2 Keep the number of walls and ceilings between the DP G321 and other network devices to a minimum each wall or ceiling can reduce your D Link wireless product s range from 3 90 feet 1 30 meters Posi
45. formation Required The device could not be identified The detected device is of unknown type Be sure that 1 The device is properly configured 2 The address on the previous page is correct Either correct the address and perform another search on the network by retuming to the previous wizard page or select the device type if you are sure the address is correct Select Custom Device Type Then click on Settings er TCP IP Printing for Windows 2000 continued ST Configure Standard TCP IP Port Monito gt SES Port Settings Port Name IP 192 168 0 10 Printer Name or IP Address 192 168 0 10 Select LPR Protocol O Raw Raw Settings Input the port name of ne the port being used by di the printer EYR r nd Gitt CI SNMP Status Enabled Click OK Add Standard TCP IP Printer Port Wizard Additional Port Information Required The device could not be identified The detected device is of unknown type Be sure that 1 The device is properly confi 2 The address on the previous page is correct Either correct the address and perform another search on the network by returning to the previous wizard page or select the device type if you are sure the address is correct Device Type Standard Custom Setinge Click Next Add Standard TCP IP Printer Port Wizard Completing the Add Standard TCP IP Printer Port Wizard You have selected a port with the fol
46. is printer Indicate whether vou want this printer to be avadable to other users If you share this printer vou must provide a share name C Share as Click Next i Prim Tes Page Select Yes to print a test page 3 caniem that the pide i mitaled mopery sou can pori las page Da you want to pont a lest page Mo Click Next Add Printer Wizard Completing the Add Printer Wizard You have successfully completed the Add Printer Wizard Y ou specified the following printer settings Name Epson Stylus COLOR 740 ESC P 2 Not Shared IP 192 168 0 10 Epson Stylus COLOR 740 ESC P 2 Yes No Click Finish The printer is now ready for printing with Windows 2000 on your network TCP IP Printing for Windows 98SE Me Open the web browser and type in the IP Address of the DP G321 For example type http 192 168 0 10 into the Location or Address field Press the Enter or Return Key Note Your PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 File Edit View Favorites Tools Help re 2 Address A http 1 3e di 68 0 10 DP G321 AirPlusG Wireless Print Server
47. k Next Highlight the printer as shown If your desired printer is not on the list click Have Disk and insert the printer driver disk that came with your printer to install the printer drivers Click Next Click Next Browse for Printer x Select the network printer that you want to add Note Printers are usually attached to computers Network Neighborhood E Entire Network c Print Servers TCP IP LPR fi 192 168 0 10 S ps 116688 u1 OK Cancel Add Printer Wizard E Type the network path or the queue name of your printer If you don t know its name click Browse to view available network printers Network path or queue name fis 32 158 0 10 ps 115688 u1 Do you print from MS DOS based programs C Yes e No lt Back Cancel Add Printer Wizard LL Click the manufacturer and model of your printer If your printer came with an Ca installation disk click Have Disk If your printer is not listed consult your printer documentation for a compatible printer Manufacturers Printers Epson Stylus Pro ESC P 2 Epson Stylus Pro XL ESC P 2 Epson Stylus Pro XL ESC P 2 Epson T 750 Epson T 1000 EPSON Stylus COLOR 740 nm gm lt Back Cancel Add Printer Wizard You can type a name for this printer or you can use the name supplied below When you are ready click Finish to install the printer and add it to the Printers folder bS Print
48. ke effect Do you want to restart your computer now Click Yes TCP IP Printing for Windows 98SE Me continued Once your computer has rebooted click on 1 Add Printer Start gt Settings gt Printers gt Add Printer a Add Printer Wizard This wizard will help you to install your printer quickly and easily To begin installing your printer click Next When the Aad Printer Wizard screen appears click Next Select Network Printer How is this printer attached to your computer If itis directly attached to your computer click Local pu If itis attached to another computer click Network rinter Local printer Network printer Click Next Type the network path or the queue name of your printer If you don t know its name click Browse to view available network printers Type in the path if you know it or click Browse Network path or queue name Do you print from MS DOS based programs C Yes No lt Back Next gt Cancel TCP IP Printing for Windows 98SE Me continued At the next screen browse for the printer port Highlight the port as shown The Port Name in this window is just an example Click OK If the network path is not specified type in the IP Address of the DP G321 and the Port Name The Port Name shown at right is just an example Select Yes or No to answer the question Do you print from MS DOS based pro grams Clic
49. l printer cable to con nect the DP G321 to your printer Switch ON your USB or parallel printer Plug the DC power adapter into the DC 5V power socket on the rear panel of the Print Server Plug the power adapter into a power outlet This will supply power to the DP G321 as it has no external power switch The green Power LED on the Print Server s front panel should illuminate steadily and the Print Server s Self Test will proceed Power ON Self Test Every DP G321 has been factory tested to operate properly When the DP G321 is powered ON it also automatically performs a Self Test on each of its major components The final result of the Self Test is signaled by the state of the USB LED indicator following the Self Test Preliminary to the actual component tests the LED indicators are tested to confirm their steady and flashing operation Immediately after power up three of the green LEDs should illuminate steadily for several seconds Then the USB LED should flash three times Irregularity of the LED during this LED test may mean there is a problem with the LED itself The actual component tests immediately follow the LED tests A normal no fault result is signaled by a flashing of the USB LED followed by a darkened LED If the Self Test routine detects any component error then following the LED tests the Self Test will halt and the LEDs will continuously signal the error according to the following table USB
50. lowing characteristics SNMP No LPR PS 116633 U1 Device 192 168 0 10 IP 192 168 0 10 To complete this wizard click Finish Click Finish lt Back fn TCP IP Printing for Windows 2000 continued Add Printer Wizard Install Printer Software 7 The manufacturer and model detetmine which printer software to use PS Highlight the printer as shown bl ae in GE sur Md Vos iila ads D ui Pals e disk click Have Disk If your printer is not listed consult your printer documentation for printer software If the desired printer is not on the list click Have Disk and insert the printer driver disk that Tg uem came with your printer to install ompaq BE E 0501 Stylus COLOR 740 ESC P 2 s S4 Epson Stylus COLOR 760 ESC P 2 the printer drivers ici S t Epson Stylus COLOR 777 ESC P 2 Epson Stylus COLOR 800 ESC P 2 PO mm ere mmm c SH This diveris talg signed I Tellme why driver signing is important Click Next va i L Name Your Printer 7 You must assign a name to this printer SS en enne M aime Because some programs do not support printer and server of more than 31 characters it is best to keep the name as short as At this screen you can input a name for the printer Printer name Click Next 47 TCP IP Printing for Windows 2000 continued Add Printer Wizard Printer Sharing You can share this porte veth other network users QS a Select Do not share th
51. mation about the wireless LAN such as the connection mode Infrastructure or Ad Hoc SSID channel data transfer rate WEP encryption and the packets status Using the Web Configuration continued Home gt Network Click the Network button in the left column to display information about the wireless LAN Clicking Refresh wil update the information Auto IP This field contains the current settings of TCP IP including DHCP BOOTP UPnP and MAC Rendezvous The items in this field are configured in Configuration gt Network TCP IP TCP IP Printing In this field you can monitor the status of your printing tasks through TCP IP Microsoft Network Printing In this field you can monitor the status of your t Configuration Auto IP DHCP BOOTP UPnP MAC Rendezvous TCPAP Printing LPR Printing Port 9100 9101 9102 Printing IPP Printing FTF Printing E mail Printing Microsoft Network Printing SMB Over NetBEUI Printing SMB Over NBT Printing MAC AppleTalk Printing AppleTalk Printing printing tasks through Microsoft Network Mac AppleTalk Printing In this field you can monitor the status of your printing tasks through Mac Apple Talk Status Total Print Jobs Total Print Size Status Total Print Jobs Total Print Size Status Total Print Jobs Total Print Size Status Total Print Jobs Total Print Size Status Total Print Jobs Total Print Size Status
52. nable care repair or service in any way that is not contemplated in the documentation for the product or if the model or serial number has been altered tampered with defaced or removed Initial installation installation and removal of the product for repair and shipping costs Operational adjustments covered in the operating manual for the product and normal maintenance Damage that occurs in shipment due to act of God failures due to power surge and cosmetic damage Any hardware software firmware or other products or services provided by anyone other than D Link Products that have been purchased from inventory clearance or liquidation sales or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product Repair by anyone other than D Link or an Authorized D Link Service Office will void this Warranty Disclaimer of Other Warranties EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN THE PRODUCT IS PROVIDED AS IS WITHOUT ANY WARRANTY OF ANY KIND WHATSOEVER INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY FITNESS FORA PARTICULAR PURPOSE AND NON INFRINGEMENT IFANY IMPLIED WARRANTY CANNOT BE DISCLAIMED INANY TERRITORY WHERE APRODUCT IS SOLD THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY 90 DAYS EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN THE ENTIRE RISKAS TO THE QUALITY SELECTIONAND PERFORMANCE OF THE PRODUCT
53. nection A blinking LED indicates activity configuration or printing WLAN A steadily lit LED indicates a proper wireless network connection no lit LED indicates an unsuccessful wireless network connection A blinking LED indicates activity configuration or printing USB1 A steadily lit LED indicates that the Print Server is transferring print data to the USB1 printer port USB2 A steadily lit LED indicates that the Print Server is transferring print data to the USB2 printer port LPT A steadily lit LED indicates that the Print Server is transferring print data to the parallel printer port DP G321 Rear Panel Connectors Network Cable Connector The Print Server s rear panel has a LAN port for CAT5 Ethernet cabling The port supports the NWay protocol allowing the Print Server to automatically detect or negotiate the transmission speed of the network DC Power Connector The DC power input connector is located on the Print Server s rear panel and is labeled DC 5V Wireless Basics D Link wireless products are based on industry standards to provide easy to use and compatible high speed wireless connectivity within your home business or public access wireless networks D Link wireless products will allow you access to the data you want when and where you want it You will be able to enjoy the freedom that wireless networking brings A wireless LAN WLAN is a cellular computer network that transmits and r
54. nt vau want to install H Client Add Highlight Client gg Adapter Protocol Cancel Click Add Lotes EL Service client enables your computer ta connect to other computers TCP IP Printing for Windows 98SE Me continued At this window click Have Disk Insert the DP G321 CD ROM into your CD ROM drive Select the letter representing the CD ROM drive on your computer from the pull down menu 2 Double click on the folder Ipr 3 Highlight Ipr inf 4 Click OK Click OK to accept the location of the file Select Network Chent x Click the Network Client that you want to install then click OK If you have an installation disk for this device click Have Disk Manufacturers Network Clients 82 Banyan DOS windows 3 1 client Have Disk cence File name Folders pr inf g lpr 4 Cancel Network Install From Disk Insert the manufacturer s installation disk into the drive selected and then click OK Copy manufacturer s files from G ALPR Browse TCP IP Printing for Windows 98SE Me continued Select Network Clent Ei E Click the Network Client that you want to install then click OF IF pau have an Installation disk for this device click Have Disk Models Have Disk Click OK Hetwork Ki Configuration Identification Access Control You should now be back to the
55. ocol TCP IP Support tab Address Type Assigned by DHCP IP Address 132 158 0 114 Subnet Mask 255 255 255 0 Default Gateway 132 158 0 1 1 Click Close Assigning a Static IP Address in Windows XP 2000 Note DHCP capable routers will automatically assign IP addresses to the com puters on the network using DHCP Dynamic Host Configuration Protocol technology If you are using a DHCP capable router you will not need to assign static IP addresses If you are not using a DHCP capable router or you need to assign a static IP address please follow these instructions I Tour Windows XP h ay s Go to Start ta Printers and Faxes ni Files and Settings Transfer OG Wizard Paint re s Search Double click 4 se Control Panel kl Programs p ET Run Log Off D Turn OFF Computer Networking Basics continued Assigning a Static IP Address in Windows XP 2000 Double click Network Connections Right click Local Area Connections Double click Properties 80 i Control Panel File Edit View Favorites Tools Help o Back P 5 p Search Folders EJ Address Ld PT vs Control Panel Add or Remove Programs Qe Switch to Category View Administrative Tools See Also F gt Game Controllers P internet Options a Keyboard kin Network Connections Phone and Modem Options Sy Power Options Printers and Faxes Start Network Connections File Edit View
56. onnected and configured To continue click Next Click Next TCP IP Printing for Windows 2000 continued Loge qi Makmak Pride i me pinta attached lo ver comer Select Local Printer V be piero recy attached io pou compute ck Loc irte Hn atchedio Local preter e Aulomabcaly detect and metal me Pug ard Play printer Mes Punter Detection This amend automatically detect and malai res Plug ered Play pintets an riene a a AN poi da ponte manual Click Next Select Create a new port at the Vater ema ae v er og sert pull down menu highlight Standard TCP IP Port lir est rogers umb PTT ui mein vi o pr gt n Ereate a new port Type TELE Click Next c Back Ca Cosi 44 TCP IP Printing for Windows 2000 aids PIP Pr inter Port Wizard Welcome to the Add Standard Sg TCP IP Printer Port Wizard auwe thes vazad bo add a poil loi a reso periei bom coninung be sue har he device n cared on 1 The rtvacale amp connected and conligaed Click Next Type in the IP address of the Print ERO Standen HE Lrinte Server in the Printer Name or IP p co re UNI Address field The Port Name field will automatically be filled in Enter the Printer Name or IP address and a port name for the desired device Printer Name or IP Address 192 168 0 10 Port Name IP 192 168 0 10 Click Next Add Standard TCP IP Printer Port Wizard Additional Port In
57. ons enter the related configuration such as the printer type USB1 USB2 LPT Chooser Name Display the print server name Printer Type Enter the printer s type in this box PostScript Level Select from the pull down menu Level 1 or Level 2 Font Group Select from the pull down menu TIP Once you have changed the settings in each option click Apply to store the settings Using the Web Configuration continued Configuration gt User DP G321 A rRIUSG Wireless Print Server Printing Control Enable User Printing Control vas No v 3 Apply Cancel Add User User Name Add Example 00 80 C8 A1 B2 C3 Printing Access S Yes ONo TERN Delete User E User List Name MAC Printing Access SNMP Printing Control By configuring the Enable User Printing Control option Yes or No the user in the User List is permitted to access the print server or not Define Users You can add delete the user s to from the User List The User List at the bottom of the screen displays the current defined user and related information for the print server Click Apply to save the changes Using the Web Configuration continued Configuration gt SNMP DP G321 G Wireless Print Server SNMP Management Community 1 Mame Access Right gt Ready rite J Community 2 Mame Access Right Community 3 Mame Access Right gt Read Only System Wireless o o9
58. or to refund at D Link s sole discretion Such repair or replacement will be rendered by D Link at an Authorized D Link Service Office The replacement Hardware need not be new or have an identical make model or part D Link may in its sole discretion replace the defective Hardware or any part thereof with any reconditioned product that D Link reasonably determines is substantially equivalent or superior in all material respects to the defective Hardware Repaired or replacement Hardware will be warranted for the remainder of the original Warranty Period from the date of original retail purchase If a material defect is incapable of correction or if D Link determines in its sole discretion that it is not practical to repair or replace the defective Hardware the price paid by the original purchaser for the defective Hardware will be refunded by D Link upon return to D Link of the defective Hardware All Hardware or part thereof that is replaced by D Link or for which the purchase price is refunded shall become the property of D Link upon replacement or refund Limited Software Warranty D Link warrants that the software portion of the product Software will substantially conform to D Link s then current functional specifications for the Software as set forth in the applicable documentation from the date of original retail purchase of the Software for a period of ninety 90 days Warranty Period provided that the Software is properly install
59. ormation to identify vour computer on the network You may enter a Computerdesoriom Computer Description example Kitchen Computer or Mary s amputer optional Full computer name Office workgroup Accounting Ta use the Network Identification Wizard to join Network ID n To rename the computer iii user account click Network and join a domain Click Change Ta rename this computer or join a domain click Change Networking Basics continued How to assign a Name to your Computer a In this window enter the Computer Name Changes Computer name You can change the name the membership of this computer Changes may affect access to network resources Select Workgroup and enter the name of the Computer name Workgroup Ow JJ All computers on your FE NONE Office network must have the same Workgroup name m Click OK How to find your IP Address in Windows XP The computers connected to your network must be in the same IP address range To verify the IP address please do the following Right click on the Dicabl Local Area Con SEDE nection icon in status _ o_LRL the task bar Repair View Available Wireless Networks Open Network Connections m Click Status s 3 05 PM Networking Basics continued How to find your IP Address in Windows XP This window will appear Wireless Metwork Connection 7 Status F fx Generall Support E Click the Internet Prot
60. ounting Examples HOME or OFFICE Click Next ass fe Networking Basics continued Please wait while Network Setup Wizard the Network Setup Wizard applies the changes Ready to apply network settings The wizard will apply the following settings This process may take few minutes to complete and cannot be interrupted Settings Network settings Computer description Mary s Computer Computer name Office Workgroup name Accounting The Shared Documents folder and any printers connected to this computer have been shared To apply these settings click Next When the changes are complete click Next Please wait while Network Setup Wizard the Network Setup Wizard configures the computer Please wait while the wizard configures this computer for home or small office networking This This may take a process may take a few minutes few minutes Please wait 4 Wier Networking Basics continued In this window select Network Setup Wizard the best option In this indes inad dana example Create a Network Setup Disk has been selected You will run this disk on uc beder Sd vecio ti s AAEE cd each of the computers Wide pou werd ir do on your network i j Tou need to run the Network Setup Wizard once an each of the computers om your Use the Network Setup Disk already have C Use my Windows XP CD CO Just finish the wizard don t need to run the wizard on other computers Click N
61. p e For US customer support please visit us online at http suppart dlink com Home System Wireless Network User Configuration System Wireless Network User SNMP Tools Print Test E mail Reset Upgrade Backup Click on the Help link from the tools bar of the main screen to enter the Help Page This page provides a link to D Link s support website D Link s support website will provide the most up to date information on your DP G321 Print Server Please check the website regularly for product and firmware updates Click on each topic for more information on any screen in the Web Configuration Utility TCP IP Printing for Windows XP Open the web browser and type in the IP Address of the DP G321 For example type http 192 168 0 10 into the Location or Address field Press the Enter or Return Key Note The PC s IP Address must be in the same subnet as the Print Server s IP Address for the two devices to communicate For example if your Print Server s IP Address is 192 168 0 10 with a subnet mask of 255 255 255 0 then your computer s IP Address should be 192 168 0 x where x is a value between 1 254 excluding 10 See Networking Basics Assigning a Static IP Address in this manual to find out how to change an IP Address File Edit Help 295 O uidt View Favorites Tools Address 4 http 192 168 0 10 LI DP G321 AirPlusG Wireless Print Server pum EE NT Device Sta
62. refer to your printer s manual Configuration Wireless D Link Building Networks for People DP G321 AirPlusG Wireless Print Server Connection Mode Infrastructure Ad Hoc SSID ault _stesuvey Wireless Channel 6 v Transmission Rate Fully Automatic WEP Encryption WEP Encryption Disable 64 bits 128 bits WEP Key Format C ASCII HEX Key 1 Encrypt Data Transmissions Using Key 1 Advanced Setting Beacon Interval Ro ms Preamble f Long Short Authentication Type Open System Shared Key Both Using the Web Configuration continued Configuration gt Wireless Wireless Interface Connection Mode Select one of two connection modes EJ Infrastructure default Connect to an existing wireless AP or router in a WLAN E Ad Hoc Connect to wireless clients in the Peer to Peer mode SSID Assign the SSID in this box You can manually input the name or select one from the pull down menu To search the available print server within the network click the Site Survey button Wireless Channel Select the channel from the pull down menu The default setting is 6 Transmission Rate Select the data transmit rate from the pull down menu The default setting is Fully Automatic WEP Encryption This field allows you to configure the settings of data encryption Please remember that the WEP key must be set before the data encryption is enforced WEP
63. ress Backup Apply Cancel E mail test will send an e mail to Admin s e mail address Test Do you want to test an e mail account E mail Account You can assign an E mail address to the print server so that the print server can send out mail to administrator directly through the print server if any change is made Enter the E mail account in the Print Server E mail Address box to enable this Outgoing E mail SMTP Server Address Enter the server address that is used to send your E mail in this box If your mail server needs to verify the user when sending E mail the DP G321 will apply the same Account Name and Password to the mail server as it does when receiving E mail E mail Notification You can set the print server to send a message through E mail when the printer status changes To enable this function set the Enable e mail notification for printer status changing option to Yes Then input the administrator s E mail address in the Admin E mail Address box Using the Web Configuration continued Tools gt Reset D Link Building Networks for People DP G321 ArPliusG Wireless Print Server Home Configuration Help Reset This device will naw be reset Print Test Upgrade kul Factory Reset All settings on this device will now be restored to the factory defaults Reset Click Apply to immediately reset the print server Factory Reset Click Apply to reload the factory default
64. settings of the print server Using the Web Configuration continued Tools gt Upgrade DP G321 Upgrade Mote Please make sure that you use the correct firmware before you proceed If vou do not know which firmare you should use please contact your local dealer for technical support Current Firmware Version and Date 1 006 2004 03 22 Select Firmware File Browse o o9 Apply Cancel Firmware Upgrade When a new version of firmware is available e g downloaded from the manufacturer s website you can upgrade the firmware of your print server Click Browse to locate the firmware file then click Apply Using the Web Configuration continued Tools gt Backup DP G321 A rRIusG Wireless Print Server Configuration ools j Backup Device Configuration to File Do vau want to backup the configuration to file Apply Print Test Restore Device Configuration from File n Select Configuration File Browse E mail Upgrade Backup Device Configuration to File Click Apply to backup your current configuration of the print server to file and then save in the computer Restore Device Configuration from File You can reload a configuration that you saved before Click Browse to point to the backup file and then click Apply Using the Web Configuration continued Help DP G321 APlus G Wireless Print Server Home Configuration Hel
65. t Center Using the Shared Documents folder Sharing files and folders To see other computers on pour network click Start and then click My Network Places To close this wizard click Finish The new settings will take effect when you restart the computer Click Yes to re start the computer System Settines Change q You must restart your computer before the new settings will take effect you want to restart your computer now You have completed configuring this computer Next you will need to run the Net work Setup Disk on all the other computers on your network After running the Network Setup Disk on all your computers your new wireless network will be ready to use Networking Basics continued How to assign a Name to your computer To name your computer please follow these directions in Windows XP m Click Start in the lower left corner of the screen a Right click My Computer Select Properties Em Command Prompt ER Open d Ina Explore Q windows Movie Maker Search Manage 9 MSN Explorer Map Network Drive Disconnect Network Drive Windows Media Player Show on Desktop Rename Tour Windows XP ans roperties All Programs gt Select the Computer Name tab in the System Properties window 2 Remote i i Hardware Advanced Windows uses the following inf
66. the PostScript printer is connected Then select the printer model from the dialog box displayed here Click Add Printer and the Printer Port configuration is complete Select the Printer Port just configured in the Print window Click Print to print your document 65 Setting up Apple Talk or LPR Printing in Mac OS X continued LPR Printers using IP protocol When you select LPR Printers using IP Proto col this window will ap pear LPR Printer s Address 192 168 0 10 Internet address or DNS name Use Default Queue on Server Type the IP Address of the Queue Name PS 116688 U1 Print Server into the LPR Printer s Address field Printer Model Generic In the Queue Name field type in the Port Name of the PostScript printer that is connected to the Print Server The Port Name illustrated here is only an example Select the printer model from the dialog box In the Queue Name field type in the Port Name of the PostScript printer that is connected to the Print Server The Port Name illustrated here is only an example Select the printer model from the dialog box Click Add and the process is complete Close all Print Center windows select the Printer Port that was just selected Click Print to print the document Click Add and the process is complete O O Setting up Apple Talk Printing in Mac OS 9 The Apple Talk network protocol is used with computers using the MacOS operating system It can
67. the rnet amp Make AppleTalk Active Computer Name D link s Computer Can be changed in Sharing Preferences AppleTalk Zone 3 Configure Automatically AppleTalk zones are unavailable until AppleTalk is on To start AppleTalk click Save Then choose a zone Click the lock to prevent further changes f Apply Now 63 Setting up Apple Talk or LPR Printing in Mac OS X continued Edit To print open a document Format Window Help and select File gt Print New SEN Intitied from the menu Open mo FE I Open Recent Close IEW Save 385 Save As 035 Save All Revert to 5aved Page Setup Prini Select Edit Printer List from the Printer dialog box ela ET Copies gem S Collated Pages All OFrom 1 to 1 e f Preview f Cancel f Print 3 e s Printer List Click Add Printer SN 64 Setting up Apple Talk or LPR Printing in Mac OS X continued Select the printing protocol preferred AppleTalk or LPR Printers using IP In this example Nimes Directory Services AppleTalk has been E ps 116688U1 Laserwriter selected Printer Model i Auto Select Cancel AppleTalk protocol After selecting AppleTalk the Port ps 116688 U1 Name of the Print Server will be dis played The Port Name shown here is k an example only 680 Printer List Kind Status Laserwriter Click on the Port to which
68. tion your devices so that the number of walls or ceilings is minimized 3 Be aware of the direct line between network devices A wall that is 1 5 feet thick 5 meters at a 45 degree angle appears to be almost 3 feet 1 meter thick At a 2 degree angle it looks over 42 feet 14 meters Position devices so that the signal will travel straight through a wall or ceiling instead of at an angle for better reception 4 Building materials can impede the wireless signal a solid metal door or aluminum studs may have a negative effect on range Try to position wireless devices and computers with wireless adapters so that the signal passes through drywall or open doorways and not other materials 5 Keep your product away at least 3 6 feet or 1 2 meters from electrical devices or appliances that generate extreme RF noise Setting up the DP G321 Installing the Print Server WARNING Configuration problems may result if the Print Server is powered up without first establishing its network connection Follow this procedure to avoid complications at the configuration stage 1 2 Confirm proper operation of your printer before connecting the DP G321 When you have confirmed proper operation of your USB or parallel printer turn your printer power OFF Confirm that your network is operating normally Connect the DP G321 to your network using a straight through CAT5 cable While the printer is powered OFF use the USB or paralle
69. tu Server Name PS 400E61 Model DP 6321 Firmware Version 1 00b 2004 03 22 OO FF 07 40 0E 61 192 168 0 10 Manual 0 days 00 13 20 a PS 400EB1 U1 Printer Speed Full Speed 12M bps Printer Stat Offline Total Print Jobs 10 Total Print Size OKBytes Printing Status Idle Name MAC IP Protocol Spooling Size 0 Bytes Printing Size 0 Bytes LPT PrinterName PS 400E61 P3 Printer Speed High Printer Status 4 Off line Total Print Jobs 0 Total Print Size 0 KBytes Printing Status Idle Name MAC IP Protocol Spooling Size 0 Bytes Printing Size 0 Bytes Ethernet Status Link Yes Speed 100M bps Duplex Yes Tx Packets 407 Tx Errors 0 Rx Packet 785 Rx Errors 0 Refresh TCP IP Printing for Windows XP continued At the Configuration window write down the Port Names for future reference You will need this information later in the configuration process Wireless Network User SNMP dar System Device Server Name Location Admin Contact Password Port Setting USB1 USB2 LET New Password s Port Name A Port Name PS 400E61 DP G321 AirPlusG Wireless Print Server Confirm Again Help PS 400E61 U1 Description PJL Printer PS 400E61 U2 Description PJL Printer No PS 400E61 P3 Description Speed High e PJL
70. updated and saved DP G321 A rRIUSG Wireless Print Server Home 1tiguratior Tools Help System Device Server Name PS 400E61 Location 5 Admin Contact Password NewPassword Confirm Again i Port Setting USB1 PortName PS 400E61 U Description PJL Printer No v USB2 PortName PS 400E61 U2 Description E PJL Printer No vi LPT Port Name PS 400E61 P3 Description 7 Speed High iv PL Printer No o O9 Apply Cancel Using the Web Configuration continued Configuration gt System Device and Port Setting System Device In this field you can configure the basic information of your print server Server Name Assign a name to the print server Location optional Assign a location for the print server Admin contact optional Assign the Admin s contact name for the print server Password Enter the Administrator password 3 8 characters To set up the password please enter the password in the New Password box and then enter the same one again in the Confirm Again box Port Settings In this field you can assign the Port Name for the print server and the description for the USB or printer ports It also allows you to select the PJL Printer setting Yes or No NOTE PJL Print Job Language has certain job requirements that must be met to work correctly for more information please
71. wn menu select Manually Internet amp Network Internet Network QuickTime Sharing BG Network Location Automatic m Built in Ethernet Show Configure ea Using BootP TRITATI ama me Servers Optional IP Address 4 2 2 2 Provided by DHCP Server Subnet Mask Router SE OR DHCP Client ID Optional Example apple com earthlink net Ethernet Address 00 05 02 33 a3 84 la Click the lock to prevent further changes Apply Now 62 Setting up Apple Talk or LPR Printing in Mac OS X continued The default IP ic mae address of the Print Show All Displays Sound Network Startup Disk Server is Location Automatic v 192 168 0 10 Manually change your IP Address to N TUEEREEEEE OOOO 102 168 0 x where Configure v Using rn x Is any number AE Servers Options except 10 whichis B except 10 which is Provided by DHCP Server Subnet Mask 255 255 255 0 Show PCI Ethernet Slot C1 the IP Address of the Print Server Router 192 168 10 1 Search Domains Optional The IP Addresses DHCP Client ID Optional and Subnet Mask l Example apple com earthlink net shown here are Ethernet Address 00 50 ba b0 00 05 examples only Click the lock to prevent fuii GNC o wy ow Apply Now 980 Merk 0 1 Select the AppleTalk Location Automatic tab in this window and check Make AppleTalk Active Show Built in E
72. y clearance or liquidation sale or other sales in which D Link the sellers or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case the product is being sold As Is without any warranty whatsoever including without limitation the Limited Warranty as described herein notwithstanding anything stated herein to the contrary Submitting A Claim The customer shall return the product to the original purchase point based on its return policy In case the return policy period has expired and the product is within warranty the customer shall submit a claim to D Link as outlined below The customer must submit with the product as part of the claim a written description of the Hardware defect or Software nonconformance in sufficient detail to allow D Link to confirm the same Bi The original product owner must obtain a Return Material Authorization RMA number from the Authorized D Link Service Office and if requested provide written proof of purchase of the BEA RE d as a copy of the dated purchase invoice for the product before the warranty service Is provided lll After an RMA number is issued the defective product must be packaged securely in the original or other suitable shipping package to ensure that it will not be damaged in transit and the RMA number must be prominently marked on the outside of the package Do not include any manuals or accessories in the shipping package D Link will

Download Pdf Manuals

Related Search

Related Contents

Manual General - Alge  03.27121.000 300CB NL-EN-FR-DE    Optoma DS330 data projector    Operating Instructions  PDF形式 - ELECOM  

Copyright © All rights reserved. Failed to retrieve file