Curtis TID991 User's Manual
Contents
1. lt SSICURTIS TID991 OWNER S MANUAL AND OPERATING INSTRUCTIONS FEATURES e Up to 99 Message Memories e English Spanish French Selectable e Name and Number Display e Redial The Displayed Number e Date and Time Stamp e Real Time Clock e 6 Levels of LCD Contrast Adjustment e 3 One touch Dialing Memories e 10 Two touch Dialing Memories e Ringer Volume HI LO OFF Selectable e Speakerphone Volume Control Max to Min e Tone Pulse Switchable e Flash Time Selectable e Mute Function e Low Battery Indicator Location of Controls Data Jack DC 9V Jack Tel line Jack Caller ID we j Scroll Up Button Scroll Down Button Tone Pulse Switch Delete Button Ringer Hi Lo Otf Switch g Dial Button One touch Memory Button M1 M3 LCD Screen Mute Button Store Button I i Receiver switch eee TAN D Volume Switch Keypad In Use LED Speakerphone Button Flash Button Microphone Redial Button Microphone DATA JACK It can let you connect to PC or Fax machine WALL MOUNTING ON A TELEPHONE WALL PLATE The telephone can be mounted on a wall phone plate Fig 1 When the telephone is mounted on the wall the reversible handset holder must be adjusted so it will hold the handset Attach the wall mount bracket into bottom of the phone Fig 2 e Using the short line cord supplied plug2. Press DEL to confirm Use the same method to set Date Note If you want to reset the Press and hold A and Y and DEL for six seconds at the same time all of the present setting will be cleaned Ringer Indicator DESCRIPTION OF DISPLAYING A 3 line LCD displaying upper line displays the basic information middle line displays the number of in coming call and bottom line displays the name of caller e NEW appears when there are new incoming calls e CALL means the total amount of incoming calls RPT means the total amount of repeated incoming calls XX XX AM PM XX XX means Hour Minute Morning Afternoon Month Day respectively e MGS means Message B If a number was received more than once the LCD will only display the time and date of the last call when review the incoming calls C If the time and date of incoming call is different from the Telephone Company the telephone will adjust the time and date automatically according to Telecom Provider when receiving calls D If there is no operation or no incoming calls more than 30 seconds LCD only displays time and date total amount of received calls and amount of new incoming calls E Ringer LED will light when there is a new call coming in until any functional keys be pressed F This telephone can store up to 99 incoming calls If there is a new call after the 99th call the oldest one will be erased automatically and the new Call will be st
3. one end into the Tel Line jack on the back of the phone Plug the other end of the cord into the wall jack e place the phone over the wall plate making sure both posts fit into slots on the back of the phone Then push down to lock the phone into place on the wall plate AC ADAPTOR FOR DC JACK SPECIFICATION OUTPUT DC 9V 100MA POLARITY OF PLUG e eS E p Fig 1 SETTING UP You must finish the pre setting before using the unit Install 3pcs AA batteries Not Included or DC adapter Not Included then press and hold UP and DOWN button for six seconds until the LCD display Adjust Contrast to enter the setting manual including LCD Contrast Adjustment Language Selectable Area Code Setting and Time Date Setting A LCD Contrast Adjustment When Adjust Contrast display on LCD use A and F to select the contrast level There are totally six levels to select Press DEL to confirm B Language Selectable After LCD contrast adjustment the LCD will display ENG ESP FRA ENG English ESP Spanish FRA French use A and V to select the desire language mode Press DEL to confirm C Area Code Setting After language setting the LCD will display ENTER AREA CODE use A and V to set the first digit of area code Press DEL to confirm Use the same method to set the rest of digits D Time Date Setting After area code setting the LCD will display ENTER TIME DATE use A and V to set time
4. Dial 3 One Touch M1 M2 M3 Dialing Memories Get the dial tone Press M1 M2 M3 the location which was stored to dial out the number To Dial 10 Two Touch Dialing Memories Get the dial tone Press AUTO button Press the digit among 0 9 the location which was stored to dial out the number IMPORTANT NOTES To operate the unit you must have CALLER ID SERVICE setup with your local telephone company Some functions such as CALLER NAME INDICATION will only operate if such services are included in the user s Caller I D program with the local telephone company 4 5 6 7 8 91011 as ee CALLE RPT an 3 l vw 188 8808 9898188 12 i 2028989858898988 H pOUUOOOUOOOUOOOL 1 Name 7 AM PM 2 Number 8 Date 3 New calls 9 On Call Indicator 4 Number of calls 10 Message 5 Number of Repeat Call 11 Low Battery Indicator 6 Clock 12 Speakerphone IMPORTANT SAFETY INSTRUCTIONS When you use this telephone follow these safety precautions to reduce the risk of fire electric shock and injury Read and understand all instructions Unplug the phone from the wall jack before cleaning with a damp cloth Do not use liquid or aerosol cleanser Do not use this phone near water for example near a bath tub sink or pool To reduce the risk of electric shock do not push objects through the phone s slot or disassemble the phone Pushing objects in the phone or opening or removing covers might
5. expose you to dangerous voltages or other risk Take it to a service person when service to repair is required Incorrect reassemble can cause electric shock when you use the telephone Do not place the phone on a bed rug and any similar surface or near a heater The phone has slots and openings for ventilation that must not be blocked or covered Do not place this phone on an unstable cart stand or table The phone might fall and be seriously damaged Unplug the phone from the phone line jack and refer service to service person under the following conditions a If the phone is exposed to rain or water b If the phone fails to operate normally c If the phone is dropped or the cabinet is damaged d If the phone exhibits a distinct change in performance Avoid using the phone during electrical storms There is a risk of electric shock from lightning Do not use the phone to report a gas leak in the vicinity of the leak Follow all safety rules and use with caution when installing or modifying telephone lines For example a Do not install telephone wire during a lightning storm b Only install telephone jacks in dry locations unless the jack is specifically designed for wet locations c Avoid touching uninsulated telephone wires or terminals unless the telephone line is disconnected at the network interface SAVE THESE INSTRUCTIONS
6. ially if lines is busy 1 Get anew dial tone and press REDIAL button 2 To get anew dial tone press the HOOK SWITCH or hang up the phone for 2 seconds Then press REDIAL This phone will remember the last number dialed even overnight Flash Time Selectable When in an office equipped with PABX your unit makes it easy to transfer calls Ask calling party to wait Press and release FLASH button Dial number to which call is intended When the party answers announce the call and hang up If you receive a busy or no answer Press and release FLASH button to re connect to calling party You may select the flash time by following steps Under on hook or off hook state Press STORE and FLASH key at the same time The LCD will display FLASH press the number among 0 9 to select the flash time 1 100ms 2 200ms 3 300ms 4 400ms 5 500ms 6 600ms 7 700ms 8 800ms 9 900ms 0 1200ms Mute Function Holding down the MUTE button prevents the other party from hearing your conversation with other people on your side until the button is released To Store 3 One Touch M1 M2 M3 Dialing Memories Get the dial tone Press STORE button Enter the number you want to store Press the desire one touch button M1 M2 M3 To Store 10 Two Touch Dialing Memories Get the dial tone Press STORE button Enter the number you want to store Press AUTO button Press the desire location among the digit 0 9 To
7. ored CALLER ID STATUS INDICATIONS UNAVAILABLE The call is made through a telephone company which does not offer Caller ID service PRIVATE The call was blocked For privacy reason many states allow callers the option to prevent his or her telephone data from being displayed on the other part s Caller ID display If you receive a call which was blocked in this way PRIVATE will be shown on the display LINE ERROR An error data was received When ERROR is shown on the display the telephone number may include some error digits OPERATION INSTRUCTION Viewing the caller ID list This unit can store up to 99 calls received Press A and V the display shows the previous older data of call When the oldest data is viewed END OF RCV will appear on the display If the received number contains your own area code the area code will not appear on the screen Erasing data from the caller ID list This unit maintains the data of last 99 calls in memory If there is a new call after those 99 calls the oldest data will be automatically erased and the new call will be stored To erase one stored number at a time 1 Press A and V button to select the data 2 Press DEL twice continuously and the displayed data will be erased If you press DEL for more than 6 seconds the entire list will be deleted Calling back a number from the caller ID list Press A and V to select the wanted number Pick u
8. p the handset press DIAL twice to dial the displayed number out Or press DIAL key once then press DEL key once and press DIAL key once again the displayed number with adding 1 as first digit will be dialed out automatically add 1 before dialed number Tone Pulse Selector Select the type of dialing that you desire or that your telephone system requires TONE The unit will operate using tone dialing PULSE The unit will dial using rotary dial type pulses Ringer Volume Control Hi Lo Off Slide the RINGER switch to HI position or LO position to turn the ringer on HI for high volume and LO for low volume Slide the RINGER switch to OFF position to turn the ringer off You still can dial out but cannot hear ringer sound of any incoming calls Ringer LED will still flash to remind you there is incoming call Don t forget to switch the ringer to ON i e HI or LO position otherwise you cannot hear the ringer on next time Speakerphone Volume Control Max to Min Slide the SPEAKER switch from the right side of the base unit to adjust the speakerphone volume from maximum Max to minimum Min In Use Indicator This bulb will light if you lift the receiver showing you the phone is connected properly and will remind you the handset if off the hook or not seated in the base properly Last Number Redialing The last number you called can be redialed automatically This is useful espec
Download Pdf Manuals
Related Search