Home

Code Alarm CA 440TW User's Manual

image

Contents

1. 2 Flashes Vehicle recieved command 1 Flash every 8 seconds Vehicle is remote started 4 Flashes Vehicle did not start 2006 Code Systems Inc SHUTING DOWN THE REMOTE START To shut down the remote start feature form the transmitter press and release the transmitter button 2 times within 2 seconds UNLOCKING THE VEHICLE optional To unlock the vehicle s doors press and hold the transmitter button for 3 seconds anytime the vehicle is remote started Note Additional parts and or labor may be necessary see your installing dealer for details VALET MODE Valet Mode is used to disable the system from remote starting To enter or exit valet mode simply follow the 4 steps outlined below 1 Push and hold the programming valet button 2 Cycle the ignition ON OFF ON OFF ON OFF 3 Release the programming valet button TRANSMITTER PROGRAMMING If the need arises for programming of additional or replacement transmitters simply follow the 4 steps outlined below 1 Turn the ignition to the ON position 2 Press and release the programming button 3 times 3 Press and hold the button of the transmitter you wish to add for 3 seconds The parking lights will flash indicating the transmitter has been learned 4 Repeat step 3 for each transmitter up to a total of 4 Code Systems Inc Limited Lifetime Warranty Code Systems Inc Limited Lifetime Warranty Code Systems Inc CODE warr
2. CODEALARM CA 440TW Owners Manual CAUTION Be certain that the vehicle is outdoors before using this or any re mote vehicle starting device A running engine produces dangerous carbon monoxide fumes which can be harmful or fatal if prolonged exposure occurs DO NOT remote start the vehicle if the car is garaged REMOTE STARTING THE VEHICLE The system WILL NOT start the vehicle if any one of the following situations exist 1 The vehicle s hood is opened 2 The gear shift selector is not in Park 3 The brake pedal is depressed 1 To start the vehicle press and release the transmitter button 2 times within 2 seconds The vehicle will start and remain running for the pre programmed 5 10 15 20 minute run cycle As a visual indication the parking lights will flash or remain on depending on the setting by your installation center 2 When you arrive at the vehicle turn the ignition key to the ON position Do not try to restart the vehicle then step on the brake pedal to disengage the remote start The vehicle will continue to run but now on it s own power 2 WAY TRANSMITTER CONFIRMATION The 2 way transmitter confirms the commands sent to the system by illuminating the transmitter button When the system recieves a command from the 2 way transmitter a signal is then sent back to the transmitter and the transmitter s button will begin to flash The number of flashes will indicate the vehicle s status
3. ants to the ORIGINAL PURCHASER of this CODE vehicle security product the Product purchased from an authorized CODE dealer that except as provided below should this Product under normal use and conditions be proven defective in material or workmanship DURING THE LIFETIME OF THE VEHICLE IN WHICH IT WAS ORIGI NALLY INSTALLED such defect s will be repaired or replaced at CODE s option without charge for parts directly related to repairs of the defect s Switches indicator lights and transmitter cases are similarly warranted to the original purchaser for a period of one 1 year from the date of purchase of the Product CODE accessories sold separately are covered by the applicable warranty accompanying the accessory This warranty is non transferable non assignable and is voided when 1 the Product is removed from the vehicle in which it was originally installed or 2 the vehicle in which the Product was originally installed is transferred to another party This warranty does not apply to any product damaged by accident physical or electrical abuse improper installation alteration or use contrary to its intended function fire flood or other natural acts In order for the Product to be repaired or replaced under the terms of this warranty the defective Product must be returned to an authorized CODE dealer and accompanied by a copy of the retail sales receipt The date of purchase and year make and model of the vehic
4. le in which the Product was originally installed must be clearly indicated on the sales receipt This warranty is exclusive and CODE MAKES NO OTHER WARRANTIES EXPRESSED OR IM PLIED ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANT ABILITY AND FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY IN NO CASE SHALL CODE BE LIABLE FOR ANY CONSE QUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR IMPLIED WHATSOEVER CODE does not warrant that the Product cannot be compromised or circumvented THE EXTENT OF CODESS LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACE MENT PROVIDED ABOVE AND IN NO EVENT SHALL CODE S LIABILITY EXCEED THE PUR CHASE PRICE PAID BY THE ORIGINAL PURCHASER OF THE PRODUCT WITHOUT INSTALLA TION LABOR Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state

Download Pdf Manuals

image

Related Search

Related Contents

USER MANUAL - Waismed Ltd.  Manual  Franklin BES-1240 User's Manual  取扱説明書  H8S/2170F E10A Emulator User`s Manual  

Copyright © All rights reserved.
Failed to retrieve file