Cobra Electronics Series 3100 User's Manual
Contents
1. cata CAR SECURITY SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV 00 www cobrait O www cobra it MAKE DAEWOO moo NUBIRA yearn 98 gt DIESEL gt ALARM SIREN Position the compact alarms and the sirens in the engine compartment near the POSITION left lateral headlamp Position the modular systems and the modules under the dashboard drivers side POWER SUPPLY 30 connect to the 2 5mm RED wire located at the rear of the left lateral frame drivers side 31 connect with an eyelet cable terminal to one of the fastening bolt of the dashboard DIRECTION INDICATORS Connect to the 1 mm BLUE and LIGHT BLUE wires located in the wiring harness and coming out of the 22 way yellow connector located on the support of the connector holder above the fuse box behind the left lateral frame drivers side ELECTRIC WINDOWS Positive control signal Front window driver s side cut the BLUE wire directly outgoing from the switch of the window to the inner drivers side door Front window passenger s side cut the 1 5 mm LIGHT BLUE wire Rear window driver s side cut the 1 5 mm BROWN wire Rear window passenger s side cut the 1 5 mm GREEN wire located in the wiring harness coming out of the drivers side door CENTRAL DOORS LOCKING Negative control signal Connect to the LIGHT BLUE wires with WHITE reference located at the position nr 7 lock and the YELLOW at the position nr 1 unlock in the 9 way white connector of the2. central door locking unit located at the rear of the left lateral frame drivers side Note for the vehicles without original key less entry please refer to diagram nr 42 for the serie Bridge antithefts or refer to diagram nr 42A for serie 3100 antithefts IMMOBILISATION POINT The vehicle has an original equipment immobiliser that may be enabled immediately when the switchboard is switched off BONNET SWITCH Install an additional switch on the front headlamp support plate DOORS SWITCH Connect to the 0 5 mm WHITE wire located in the wiring harness coming out of the 16 way white connector on the support of the connector holder above the fuse box behind the left lateral frame drivers side BOOT SWITCH Connect to the 0 5 mm PINK wire with BLACK reference located in the wiring harness and coming out of the 16 way white connector located on the support mentioned above Note This information is not binding therefore it must be considered only an example for installation purposes that must be executed danub98gbb doc as per the instructions given on the product installation manual cairn CAR SECURITY SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV 00 www cobra it FITTING DIAGRAM N 42 Serie BRIDGE antitheft ORANGE VIOLET White connector coming out of the central doors locking unit VIOLET ORANGE Negative control signal For the versions without original radio control the positions Nr 1 and Nr 7 of the white conne
3. ctor of the central doors closing are free so insert suitable fastons Note This information is not binding therefore it must be considered only an example for installation purposes that must be executed danub98gbb doc as per the instructions given on the product installation manual aa CAR SECURITY SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV 00 www cobra it FITTING DIAGRAM N 42A Serie 3100 antitheft ORANGE WHITE VIOLET WHITE f White connector coming out of the central doors locking unit VIOLET ORANGE Negative control signal For the versions without original radio control the positions Nr 1 and Nr 7 of the white connector of the central doors locking are free so insert suitable fastons Note This information is not binding therefore it must be considered only an example for installation purposes that must be executed danub98gbb doc as per the instructions given on the product installation manual
Download Pdf Manuals
Related Search