Clarion WXZ466MP User's Manual
Contents
1. bel or discs with marks where cellophane tape or rental CD labels were removed It may be impossible to extract these discs from the unit and they may cause the unit to break down Listening to a disc already loaded in the unit Turn the SOURCE knob to select the CD MP3 mode When the unit enters the CD MP3 mode play starts automatically If there is no disc loaded the indication NO DISC appears in the display 16 WXZ466MP Pausing play 1 Press the SEARCH knob to pause play PAUSE appears in the display 2 To resume CD play press the SEARCH knob again Displaying CD titles This unit can display title data for CD text MP3 WMA disc and user titles input with this unit 1 Press the DISP button to select the title dis play 2 Each time you press the TITLE button the title changes in the following order CD TEXT disc User title user gt CD text title disc gt Artist name gt CD text title track gt User title user MP3 WMA disc Folder Track 3 Album gt Artist gt Title gt Folder Notes If the CD playing is not a CD text CD or no user title has been input NO TITLE appears in the display If MP3 WMA disc is not input TAG NO TAG ap pears in the display e For MP3 supports ID3 Tags V2 3 2 2 1 1 1 0 Tag displays give priority to V2 3 2 2 In the case of album Tags for WMA the informa tion written into the extension hea2. 1 Press the A MODE knob and select TREBLE 2 Turn the A MODE knob to adjust the treble The factory default setting is 0 Adjustment range 6 to 6 3 Turn the SEARCH knob to select TREBLE FREQ Turn the A MODE knob to select the fre quency The factory default setting is 12k Adjust ment 8 kHz 12 kHz 4 When the adjustment is complete press the A MODE knob several times until the func tion mode is reached the balance Press the A MODE knob and select BAL ANCE 2 Turn the A MODE knob to adjust the bal ance of the left and right speakers The factory default setting is 0 Adjustment range L13 to R13 3 When the adjustment is complete press the A MODE knob several times until the function mode is reached Adjusting the fader 1 Press the A MODE knob and select FADER 2 Turn the A MODE knob to adjust the bal ance of the front and rear speakers The factory default setting is 0 Adjustment range F12 to R12 3 When the adjustment is complete press the A MODE knob several times until the function mode is reached Radio Operations Listening to the radio 1 Turn the SOURCE knob and select the radio mode The frequency appears in the display 2 Press the BAND button and select the radio band Each time the button is pressed the radio reception band changes in the follow ing order gt 2 gt FM3
3. Set how to scroll in CD TEXT MP3 WMA TITLE The factory default setting is ON 1 Press and hold the DISP button for 1 sec ond or longer to switch to the display adjust mode 2 Turn the SEARCH knob to select AUTO SCROLL 3 Turn the A MODE knob to select ON or OFF ON Scrolls automatically OFF Scrolls just 1 time when the title was changed or you press and hold the TITLE button for 1 second or longer 4 Press the DISP button to return to the previ ous mode Dimmer control You can set the dimmer control The factory default setting is ON 1 Press and hold the DISP button for 1 sec ond or longer to switch to the display adjust mode 2 Turn the SEARCH knob to select DIMMER 3 Turn the A MODE knob to select ON or OFF 4 Press the DISP button to return to the previ ous mode 20 WXZ466MP Adjust Mode Anti theft indicator The red Anti theft indicator is a function for detering theft The disc indicator of the DIRECT button 2 blinks The factory default setting is OFF 1 Press the ADJ button to switch to the adjust mode 2 Turn the SEARCH knob to select BLINK LED 3 Turn the A MODE knob to select ON or OFF 4 Press the ADJ button to return to the previ ous mode Adjusting the auxiliary input sensitivity Adjust the auxiliary sensitivity when the audio from an external device is difficult to
4. To cancel disc repeat play press the RPT button again Random play Random play selects and plays individual tracks on the disc in no particular order This function continues automatically until it is cancelled 1 Press the RDM button 2 To cancel random play press the RDM but ton again Disc random play The disc random play selects and plays indi vidual tracks or discs automatically in no par ticular order This function continues automati cally until it is cancelled 1 Press and hold the RDM button for 1 sec ond or longer 2 To cancel disc random play press the RDM button again WXZ466MP 23 TV Operations TV tuner functions When an optional TV tuner is connected through the CeNET cable this unit controls all TV tuner functions To watch TV it requires a TV tuner and a monitor ee a TV Turn the SOURCE knob and select the TV mode 2 Press the BAND button to select the desired TV band TV1 or TV2 Each time the button is pressed the input selection toggles between TV1 and TV2 3 Turn the SEARCH knob to tune in the de sired TV station Watching a video The TV tuner features a VTR input for an exter nal A V source such as a DVD player or game station 1 Press and hold the ADJ button for 1 second or longer to select VTR 2 To return to the TV broadcast press and hold the ADJ button for 1 second or longer TV tuning There are 3 types of TV tuning modes ava
5. gt AM gt FMi 3 Turn the SEARCH knob to tune in the de sired station Tuning There are 3 types of tuning modes available seek manual and preset tuning Seek tuning 1 Press the BAND button and select the de sired band FM or AM If MANU is lit in the display press and hold the BAND button for 1 second or longer MANU in the display goes off and seek tun ing is now available 2 Turn the SEARCH knob to automatically Seek a station When the knob is turned right the station is sought in the direction of higher frequencies if the knob is turned left the station is sought in the direction of lower frequencies Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the BAND button and select the de sired band FM or AM If MANU is not lit in the display press and hold the BAND button for 1 second or longer is lit in the display and manual tuning is now available 2 Tune into a station Quick tuning Turn the SEARCH knob for 1 second or longer to tune in a station Step tuning Turn the SEARCH knob to manually tune in a station Recalling a preset station A total of 24 preset positions 6 FM1 6 FM2 6 FM3 6 AM exists to store individual radio sta tions in memory
6. maximum Switching the display When the power is turned on 1 Each time you press the DISP button the display switches in the following order Radio mode Main display frequency gt Title display gt Clock display CD MP3 mode Folder Track No display MP3 WMA disc only gt Main display Play time gt Title display gt Clock display Once selected the preferred display becomes the display default When a function adjust ment such as volume is made the screen will momentarily switch to that function s display then revert back to the preferred display sev eral seconds after the adjustment When you have entered a title in a CD MP3 WMA it appears in the display If you have not entered a title NO TITLE appears in the dis play For information on how to enter a title refer to the subsection Entering titles in the section Common Operations When the power is turned off 1 Each time you press the DISP button the display switches in the following order Clock display gt Display off gt Clock dis play When the display is turned on 1 Press the SPE ANA button for 1 second or longer to turn off the display To turn on the display press the SPE ANA button again or press the DISP button The following buttons are valid while the dis play is turned off SOURCE VOLUME ISR LOAD 4 Basic Operations Setting the spectrum analyze
7. CDC655Tz or DCZ625 1 Press the DISP button to select the title dis play Each time you press the TITLE button the title changes in the following order User title user gt CD text title disc gt Artist name gt CD text title track gt User title user Notes If the CD playing is not a CD text CD or no user title has been input NO TITLE appears in the display If a CD text CD is not input its disc title or a track title NO TITLE appears in the display N 22 WXZ466MP Procedure to scroll a title Set SCROLL to ON or OFF The factory default setting is ON Refer to the subsection Setting the method for title scroll in the section Common Operations When set to ON The title is automatically kept scrolling When set to OFF To scroll just 1 time when the title was changed or you press and hold the TITLE button for 1 second or longer Selecting a CD Press the DIRECT buttons to select the de sired disc The DIRECT button is valid only when correspond ing disc indicator is turned on Selecting a track Track up 1 Turn the SEARCH knob right to move ahead to the beginning of the next track 2 Each time you turn the knob right the track advances ahead to the beginning of the next track Track down 1 Turn the SEARCH knob left to move back to the beginning of the current track 2 Turn the knob left twice to m
8. PAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL CHANGES OR MODIFICATIONS NOT EX PRESSLY APPROVED BY THE MANUFAC TURER FOR COMPLIANCE COULD VOID THE USER S AUTHORITY TO OPERATE THE EQUIP MENT INFORMATION FOR USERS CHANGES OR MODIFICATIONS TO THIS PRODUCT NOT APPROVED BY THE MANU FACTURER WILL VOID THE WARRANTY 2 Driving on extremely bumpy roads which cause severe vibration may cause the sound to skip 3 This unit uses a precision mechanism Even in the event that trouble arises never open the case disassemble the unit or lubricate the ro tating parts WXZ466MP 3 Handling Compact Discs Use only compact discs bearing the or mark TAL AUDIO Do not play heart shaped octagonal or other specially shaped compact discs Some CDs recorded in CD R CD RW mode may not be usable Handling Compared to ordinary music CDs CD R and CD RW discs are both easily affected by high temperature and humidity and some of CD R and CD RW discs may not be played Therefore do not leave them for a long time in the car New discs may have some roughness around _Ball point pen the edges If such discs are used the player may not work or the sound may skip Use a ball point pen or the like to remove any roughness from the edge of the disc Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen Never play a compact disc with an
9. Pressing the corresponding DIRECT button recalls the stored radio fre quency automatically 1 Press the BAND button and select the de sired band FM or AM 2 Press the corresponding DIRECT button to recall the stored station Press and hold one of the DIRECT buttons for 2 seconds or longer to store that station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory Auto store Auto store is a function for storing up to 6 sta tions that are automatically tuned in sequen tially If 6 receivable stations cannot be received a previously stored station remains unoverwritten at the memory position 1 Press the BAND button and select the de sired band FM or AM 2 Press and hold the SEARCH knob for 2 seconds or longer The stations with good re ception are stored automatically to the preset channels WXZ466MP 13 Radio Operations Preset scan Preset scan receives the stations stored in pre set memory in order This function is useful when searching for a desired station in memory 1 Press the SEARCH knob 2 When a desired station is tuned in press the SEARCH knob again to continue receiving that station Note Be careful not to press and hold the SEARCH knob for 2 seconds or longer otherwise the auto
10. hear even after adjusting the volume The factory default setting is MID 1 Press the ADJ button to switch to the adjust mode 2 Turn the SEARCH knob to select AUX SENSE 3 Turn the A MODE knob to select from LOW MID or HIGH 4 Press the ADJ button to return to the previ ous mode Performing a system check This function verifies the devices hooked up through CeNET 1 Press the ADJ button to switch to the adjust mode 2 Turn the SEARCH knob to select SYS CHECK 3 Press and hold the SEARCH knob for 1 second or longer to start the system check The digital connection configuration is auto matically checked When the system check is complete the dis play returns to the previous mode Common Operations Entering titles Titles up to 10 characters long can be stored in memory and displayed for CD CD changer and Radio TV stations The number of titles that can be entered for each mode are as follows Number of titles CD mode 50 titles TV mode 20 titles Radio mode 30 titles Number of titles 100 titles CD changer mode DCZ625 connected CDC655Tz connected 100 titles 1 Turn the SOURCE knob to select the mode you want to enter a title Radio CD CD changer or TV 2 Play a track or tune in to a radio TV station for which you want to enter the title 3 Do one of the following In the CD or CD changer mode Press the TITLE butt
11. or longer to turn off the power SCN button Performs scan play for 10 seconds of each track while in the CD MP3 mode Press and hold for 1 second or longer to perform all scan play TITLE button Switches the titles Press and hold for 1 second or longer to input or scroll the title DIRECT buttons Stores a station into memory or recalls it directly while in the radio mode Selects the disc 6 WXZ466MP A MODE knob PUSH G EQ e Turn to select the folder MP3 WMA disc only Press to switch to the audio mode LPO D Z LEVEL G EQ EDIT BASS TREBLE BALANCE FADER Press and hold for 1 second or longer to turn on or off the G EQ D Z button Selects one of the 3 types of sound characteristics preset in memory ADJ button Switches to the adjust mode SEARCH knob PUSH PS AS gt II ENT Turn to select a station while in the radio mode or se lects a track while in the CD MP3 mode Turn for 1 second or longer to switch the fast forward fast rewind Press to perform preset scan in the radio mode Press and hold for 2 seconds or longer to perform auto store Press to play or pause a CD while in the CD MP3 mode ISR button Instant station recall Recalls ISR radio station in memory Press and hold for 2 seconds or longer Stores cur rent station into ISR memory radio mode only BAND button Switches the band Press and hold for 1 second or longer to sw
12. the unit If you try to push it into the unit forcibly without removing it the CD cannot be ejected This will result in damage to the mechanism Please never do this Be sure to unfold and read the next page 417 7E EE S K 0 HOA Me OS HH SAIS WXZ466MP 4 3 CONTROLS 12 Source unit 27 CD SLOT IR Receiver Clarion 4 LOAD ES SPE ANA DISP SEARCH A MODE VOLUME a seanci 4 VOLUME G SOURCE A MODE BAND 3l Da JT lhe H BAND ISR ADJ 10 2 DIRECT TITLE SCN RPT RDM Li 4 Display Items 7AM SH HA SS Preset channel indication 1 to 6 Operation status indication Disc number indication 1 to 6 Titles clock etc are displayed MEMBER 1 6 ESE Source indication X85457 1 6 ania HHS HRR 1 6 AS EA me osa HS 1 6 AZ amp o HA AUCH um L P O MANU t ST MP3WMA 123 GEQ ALL P SCN RPT RDM Spectrum analyzer display Function indication Sie tT ER WREE AMER SAI E 216 A Display Screen TFF Spei In extreme cold the screen movement may slow down and the screen may darken but this is normal The screen will recover when it
13. to be played first is MPS WMA file data and no sound is heard Note When playing a CCCD Copy Control CD set the setting to CD type When this is set to MP3 WWA type the CD cannot be played normally in some cases AWARNING About a Single CD 8cm CD Since the unit is not compatible with a single CD do not load it into the unit Keep in mind the fact that a single CD can not be played even using a single CD adaptor for the unit If you try to push it into the unit forcibly without removing it the CD cannot be ejected This will result in damage to the mechanism Please never do this Disc In Play function Pressing the LOAD button inserts the disc even if the power to the unit is not turned on Loading a CD CD 1 Press the LOAD button The disc indicator of available slot blinks and the indication appears in the display After that the indication CD IN and SHUTTER OPEN appears in the display 2 Insert a CD into the CD SLOT The corre sponding disc indicator lights when loading is completed and the CD plays automatically If you want to insert a disc into the particular slot press the DIRECT button with corresponding disc indicator not lighting after pressing the LOAD but ton To cancel loading Press the LOAD button again Note You can insert a disc only within 15 seconds dur ing CD IN appears in the display and the shutter insi
14. 2 seconds or longer Auto store No function Scan play When pressed and held for 1 second or longer All scan play Repeat play When pressed and held for 1 second or longer All repeat play Scan play When pressed and held for 1 second or longer Disc scan play Repeat play When pressed and held for 1 second or longer Disc repeat play Preset scan When pressed and held for 2 seconds or longer Auto store No function No function Random play When pressed and held for 1 second or longer All random play Random play When pressed and held for 1 second or longer Disc random play Switches between TV and VTR Some of the corresponding buttons on the main unit and remote control unit have different functions WXZ466MP 9 6 OPERATIONS Basic Operations ACAUTION Be sure to lower the volume before switch ing off the unit power or the ignition key The unit remembers its last volume setting If you switch the power off with the volume up when you switch the power back on the sudden loud volume may hurt your hearing and damage the unit Turning on off the power Note Be careful about using this unit for a long time without running the engine If you drain the battery too far you may not be able to start the engine and this can reduce the service life of the battery Press the SOURCE knob The illumination a
15. ATIONS nece sa 10 BASIC OD rall nS ua Susan ayapana 10 Radio Operati niSuur a Sasu Sau SSS SSS Sasu ss 13 CD MP3 WMA Operations 14 Common Operations a 18 7 OPERATIONS OF ACCESSORIES 02 CD Changer Operations 2 22 TV Operations 24 8 TROUBLE SHOOTING ed 9 ERROR DISPLAYS 2 28 10 SPECIFICATIONS 29 1 FEATURES COMPACT Plays Windows DIGITAL AUDIO A TEXT m Media Built in 6 disc CD changer amp MP3 WMA compatible VF display with spectrum analyser and message information Digital Z Enhancer and Listening Position Optimizer for Sound Creation WXZ466MP 2 PRECAUTIONS 1 When the inside of the car is very cold and the player is used soon after switching on the heater moisture may form on the disc or the optical parts of the player and proper playback may not be possible If moisture forms on the disc wipe it off with a soft cloth If moisture forms on the optical parts of the player do not use the player for about one hour The con densation will disappear naturally allowing nor mal operation ACAUTION USE OF CONTROLS ADJUSTMENTS OR PER FORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE THE COMPACT DISC PLAYER and MINI DISC PLAYER SHOULD NOT BE ADJUSTED OR RE
16. Clarion Owner s manual AGAR NS ASA WXZ466MP 2 DIN 6 disc CD MP3 WMA Receiver CeNET Control 2 DIN 68ECD MPS3 WMAjZilirgg H 2DIN 6C AS CD MP3 WMA 2 A H CeNET HES Thank you for purchasing this Clarion product Please read this owner s manual in its entirety before operating this equipment After reading this manual be sure to keep it in a handy place e g glove compartment This manual includes the operating procedures of the CD changer and TV tuner connected via the CeNET cable The CD changer and TV tuner have their own manuals but no explanations for op erating them are described Contents WEARS d M E ie 2 2 JPRECAUTIONS rrr rate ei HET ns era ar ree DE EITHER Ere 3 Handling Compact Discs 3 CONTROLS 2 205 5 DiSplay MICI E 5 Display SCH OM ME 5 4 NOMENCLATURE ecce eec eee am er de Leve ed veu vd ed v od 6 Names of the Buttons and their Functions cicer ret tenentis 6 Major Button Operations When External Equipment is Connected to This Unit 7 5 REMOTE CONTROL rr t ete er E FO An eee ee 8 Ins rting th Batlety t dene reste hire Ea e cte e paarde ieaie riina 8 Functions of the Remote Control Unit Buttons 9 6 OPER
17. Press the DIRECT button to play the first track track No 1 on the disc In case of MP3 WMA the first track of a folder be ing played will be returned Scan play This function allows you to locate and play the first 10 seconds of all the tracks recorded on a disc or folder 1 Press the SCN button to perform scan play Scan play starts from the next track after the track currently being played 2 To cancel scan play press the SCN button again All scan play This function allows you to locate and play the first 10 seconds of the first track of all discs or folders 1 Press and hold the SCN button for 1 sec ond or longer to perform all scan play All scan play starts from the next disc or folder after the disc or folder currently being played 2 To cancel all scan play press the SCN but ton again Repeat play This function allows you to play the current track repeatedly 1 Press the RPT button to perform repeat play 2 To cancel repeat play press the RPT button again All repeat play This function allows you to play all tracks re peatedly in the disc or folder currently being played 1 Press and hold the RPT button for 1 second or longer to perform all repeat play 2 To cancel all repeat play press the RPT button again Random play This function allows you to play all tracks re corded on a disc or folder in a random order 1 Press the RDM button to perfo
18. a the TV tuner area setting changes 1 Press the ADJ button to switch to the adjust mode 2 Turn the SEARCH knob to select TV AREA 3 Press the SEARCH knob 4 Turn the A MODE knob to select the recep tion area 5 Press the SEARCH knob 6 Press the ADJ button to return to the previ ous mode The above operations are required when a TV tuner other than 75012 is connected Setting the TV diver You can change the reception setting for the TV antenna connected to the TV tuner The factory default setting depends on the TV 1 Press the ADJ button to switch to the adjust mode 2 Turn the SEARCH knob to select TV DIVER 3 Turn the A MODE knob to select ON or OFF ON Sets the diver setting to ON OFF Sets the diver setting to OFF 4 Press the ADJ button to return to the previ ous mode WXZ466MP 25 8 TROUBLE SHOOTING Problem Power does not turn on No sound is produced Fuse is blown Measure Replace with a fuse of the same amperage If the fuse blows again consult Clarion dealer Incorrect wiring Consult Clarion dealer No audio when operating the unit with amplifiers Amplifier turn on lead is shorted to ground or excessive current is required Turn the unit off and check each wire for a possible short If the amplifier turn on lead shorts out cover it with insulation such as tape Nothing happ
19. ble with all cellular tele phones Contact your local authorized Clarion dealer for information on proper installation and compatibility AUX function This system has an external input jack so you can listen to audio from an external device con nected to this unit WXZ466MP 21 7 OPERATIONS OF ACCESSORIES CD Changer Operations CD changer functions When an optional CD changer is connected through the CeNET cable this unit controls all CD changer functions This unit can control a to tal of 2 changers Turn the SOURCE knob and select the CD changer mode to start play If 2 CD changers are connected turn the SOURCE knob to se lect the CD changer for play If NO MAG appears in the display insert the maga zine into the CD changer DISC CHECK appears in the display while the player loads checks the magazine If NO DISC appears in the display eject the maga zine and insert discs into each slot Then reinsert the magazine back into the CD changer Note Some CDs recorded in CD R CD RW mode may not be usable ACAUTION CD ROM discs cannot be played from every CD changer it s depended on the model Pausing play 1 Press the SEARCH knob to pause play PAUSE appears in the display 2 To resume play press the SEARCH knob again Displaying CD titles This unit can display title data for CD text CDs and user titles input with this unit When connected to
20. de the slot is open When it s out of time CD IN disappears and the shutter is closed and you cannot insert a disc Please do not insert a disc forcibly when the shut ter is closed This may damage a disc or the mechanism of the shutter WXZ466MP 15 CD MP3 WMA Operations CDs at one time 1 Press and hold the LOAD button for 1 sec ond or longer 2 Insert a CD into the CD SLOT one by one Notes Never insert foreign objects into the CD SLOT If the CD does not insert easily there may be an other CD in the mechanism or the unit may re quire service Discs not bearing the MISC or disig mark and DIGITAL AUDIO CD ROMs cannot be played by this unit Some CDs recorded in CD R CD RW mode may not be usable Eject function Ejecting CD 1 Press the corresponding DIRECT button that you want to eject the CD 2 Press the 4 button Ejecting all CDs 1 Press and hold the 4 button for 1 second or longer Pressing the 4 amp button ejects the disc even if the power to the unit is not turned on f you leave the ejected CD without removing it it will be drawn into the unit automatically after about 15 seconds Auto reload function A CAUTION Do not try to put your hand or fingers in the disc insertion slot Also never insert foreign objects into the slot Do not insert discs where adhesive comes out from cellophane tape or a rental CD la
21. der is displayed Only ASCII characters can be displayed in Tags Selecting a track e Track up 1 Turn the SEARCH knob right to move ahead to the beginning of the next track 2 Each time you turn the knob right the track advances ahead to the beginning of the next track Track down 1 Turn the SEARCH knob left to move back to the beginning of the current track 2 Turn the knob left twice to move to the begin ning of the previous track CD MP3 WMA Operations Fast forward fast rewind Fast forward Turn the SEARCH knob right for 1 second or longer Fast rewind Turn the SEARCH knob left for 1 second or longer For MP3 WMA discs it takes some time until the start of searching and between tracks In addition the playing time may have a margin of error Folder select This function allows you to select a folder con taining MP3 WMA files and start playing from the first track in the folder 1 Turn the A MODE knob left to move to the previous folder Turn the A MODE knob right to move to the next folder Turn the A MODE knob right while in the fi nal folder to shift to the first folder Folder without an MP3 WMA file is not select able Selecting a CD Press the DIRECT buttons to select the de sired disc The DIRECT button is valid only when corre sponding disc indicator is turned on Top function The top function resets the CD player to the first track of the disc
22. e you press the A MODE knob the item changes as following order When DZE 1 2 3 is set LPO DZE LEVEL BALANCE FADER Last function mode e When DZE OFF is set LPO G EQ EDIT gt BASS gt TREBLE BALANCE FADER gt Last function mode Note e display automatically returns to the previous mode Adjusting the LPO Listening Position Optimizer This is the function that virtually optimizes the speaker distances of each type of a car to the listening position which realizes the clearer soundstage The setting value has to be adjusted to the lis tening position and the type of your car The factory default setting is OFF 1 Press the A MODE knob and select LPO 2 Turn the A MODE knob to select the listen ing position The adjustment items you can select are as follows L3 L2 L1 OFF R1 R2 R3 OG The setting value of the listening position L left seat R right seat 1 COMPACT com pact car 2 SEDAN sedan 3 1 BOX van 3 When the adjustment is complete press the A MODE knob several times until the func tion mode is reached Adjusting the DZE level You can adjust the DZE level in 3 steps and reg ister each adjustment respectively This adjustment can only be performed when the DZE is set to DZE 1 2 3 1 Press the A MODE knob and select DZE LEVEL 2 Turn the A MODE knob to ad
23. elect SCRN SVR Turn the A MODE knob to select or OFF Press the DISP button to return to the previ ous mode Entering MESSAGE INFORMATION When is selected for the screen saver setting you can change the contents of the message Up to 30 characters can be entered The factory default setting is Welcome to Clarion 1 A Press and hold the DISP button for 1 sec ond or longer to switch to the display adjust mode Turn the SEARCH knob to select MSG INPUT Press the SEARCH knob Turn the SEARCH knob to move the cursor Press the BAND button to select a character Each time you press the BAND button the character changes in the following orders Capital letters gt Small letters gt Numbers and Symbols gt Umlaut gt Capital letters Turn the A MODE knob to select the de sired character Repeat steps 4 to 6 to enter up to 30 charac ters for message 19 WXZ466MP Common Operations 8 Press and hold the SEARCH knob for 2 seconds or longer to store the message in memory and return to the display adjust mode Press and hold the BAND button for 1 second or longer to delete the message Then press and hold the SEARCH knob for 2 seconds or longer to return the message to the default setting 9 Press the DISP button to return to the previ ous mode Setting the method for title scroll
24. ens when buttons are pressed The microprocessor has malfunctioned due to noise etc Press the reset button for about 2 seconds with a thin rod Reset button No audio The speaker protection circuit is operating Check the speaker connection 2 Turn down sound volume Function can also be restored by turning the power off and on again If the sound is muted again consult Clarion dealer Push EJECT is displayed Something is wrong with disc or mechanism Press the 4 button to avoid the trouble If the situation is not improved despite you press the A button several times please consult Clarion dealer FAIL is displayed Anti theft function is out of order Press and hold the reset button for 2 seconds or longer If the situation is not improved please consult Clarion dealer 26 No audio MP3 WMA files are absent on the disc Write MPS WMA files onto the disc properly Files are not recognized as an MP3 WMA file Use MP3 WMA files encoded properly File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system Sound skips or is noisy WXZ466MP Disc is dirty Clean the disc with a soft cloth Disc is heavily scratched or warped Replace with a disc with no scratches Problem Sound is cut or skipped Noise is generated or noise is mixed with sound MP3 WMA
25. files are not encoded properly Measure Use MP3 WMA files encoded properly Poor sound quality in extremely cold weather or extreme humidity Water droplets may form on the internal lens when the car is parked in a humid place Let dry for about 1 hour with the power on Wrong filename File system is not correct Use ISO9660 level 1 2 or JOLIET or Romeo file system WXZ466MP 27 9 ERROR DISPLAYS If an error occurs one of the following displays is displayed Take the measures described below to eliminate the problem Error Display ERROR 3 A DISC cannot be played due to scratches etc Measure Replace with a non scratched disc ERROR 4 A foreign object is pinched in the DISC slot or the shutter is damaged due to opening the shutter forcibly etc Remove the object inside the slot If there is no foreign object or the situation is not improved in spite of removing it please consult Clarion dealer ERROR 6 A DISC is loaded upside down inside the CD deck and cannot play Eject the disc then reload it properly ERROR 2 A DISC inside the CD changer is not loaded properly This is a failure of CD changer s mechanism and consult Clarion dealer ERROR 3 A DISC inside the CD changer cannot be played due to scratches etc Replace with a non scratched disc CD changer ERROR 6 A DISC inside the CD changer cannot be played because it is l
26. he car s battery or take out this unit the clock is re set While setting the clock if another button or operation is selected the clock set mode is can celed Setting the sensitivity of the spectrum analyzer display The factory default setting is MID 1 Press hold the DISP button for 1 sec ond or longer to switch to the display adjust mode Turn the SEARCH knob to select S A SENSE Turn the A MODE knob to select from LOW MID or HIGH Press the DISP button to return to the previ ous mode Setting the speed of the spectrum analyzer display The factory default setting is MID 1 2 3 4 Press and hold the DISP button for 1 sec ond or longer to switch to the display adjust mode Turn the SEARCH knob to select S A SPEED Turn the A MODE knob to select from LOW MID or HIGH Press the DISP button to return to the previ ous mode Turning the screen saver function on or off If the screen savers are not desired they can be turned off If the button operation is performed with the screen saver function on the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display The factory default setting is ON 1 Press and hold the DISP button for 1 sec ond or longer to switch to the display adjust mode Turn the SEARCH knob to s
27. ilable seek manual and preset tuning Seek tuning 1 Press the BAND button and select the de sired TV band TV1 or TV2 If MANU is lit in the display press and hold the BAND button for 1 second or longer MANU in the display goes off and seek tun ing is now available 2 Turn the SEARCH knob to automatically Seek a station Turn the knob right to auto matically tune up the frequency band to the next available TV station turn the knob left to automatically tune down 24 WXZ466MP Manual tuning There are 2 ways available Quick tuning and step tuning When you are in the step tuning mode the fre quency changes one step at a time In the quick tuning mode you can quickly tune the desired frequency 1 Press the BAND button and select the de sired band TV1 or TV2 If MANU is not lit in the display press and hold the BAND button for 1 second or longer lights the display and manual tun ing is now available 2 Tune into a station Quick tuning Turn the SEARCH knob for 1 second or longer to tune in a station Step tuning Turn the SEARCH knob to manually tune in a station Recalling a preset station A total of 12 TV stations can be stored 6 TV1 and 6 TV2 This allows you to select your favor ite TV stations and store them in memory 1 Press the BAND button and select the de sired TV band TV1 or TV2 2 To recall a stored TV station press
28. itch seek or manual tuning Press and hold for 1 second or longer to switch the track type to play in the CD MP3 mode SPE ANA button Switches the spectrum analyzer pattern Scan Pat tern 1 to 7 Off LOAD button Insets a disc Press and hold for 1 second or longer to insert two or more discs Major Button Operations When External Equipment is Connected to This Unit When the CD DVD changer is connected For details see the section CD Changer Opera tions For the DVD changer refer to the Owner s Manual provided with the DVD changer DISP button Switches the display indication main display title dis play and clock display RDM button Performs random play Press and hold for 1 second or longer to perform disc random play RPT button Performs repeat play Press and hold for 1 second or longer to perform disc repeat play SCN button Performs scan play for 10 seconds of each track Press and hold for 1 second or longer to perform disc scan play TITLE button Switches the titles Press and hold for 1 second or longer to input or scroll the title only CD changer DIRECT buttons Selects the disc SEARCH knob PUSH PS AS gt II ENT Turn to repeat or advance a track when listening to a disc Turn for 1 second or longer to switch the fast for ward fast rewind Press to play or pause a CD or DVD When the TV is connected For de
29. just the level The factory default setting is MID Adjust ment LOW MID HIGH 3 When the adjustment is complete press the A MODE knob several times until the func tion mode is reached WXZ466MP 11 Basic Operations Adjusting the G EQ EDIT This function allows you to correct each fre quency band by 9 band equalizer This adjustment can only be performed when the DZE is set DZE OFF 1 Press the A MODE knob and select G EQ EDIT Turn the SEARCH knob to select the fre quency Adjustment range 63Hz to 16kHz Turn the A MODE knob to adjust the gain The factory default setting is 0 Adjustment range 6 to 6 Repeat steps 2 and 3 to adjust the gain and the frequency Adjusting the bass Gain Frequency This adjustment can only be performed when the DZE is set to DZE 1 Press the A MODE knob and select BASS 2 Turn the A MODE knob to adjust the bass The factory default setting is 0 Adjustment range 6 to 7 Turn the SEARCH knob to select BASS FREQ Turn the A MODE knob to select the fre quency The factory default setting is 60 Adjustment 60 80 120 Hz When the adjustment is complete press the A MODE knob several times until the function mode is reached 12 WXZ466MP Adjusting the treble Gain Frequency This adjustment can only be performed when the DZE is set to DZE
30. nd display on the unit light up The unit automatically remembers its last operation mode and will automatically switch to display that mode Press and hold the SOURCE knob for 1 sec ond or longer to turn off the power for the unit Note Disk check This unit will check the discs inside it when you turn on the power for the first time after wiring or when you press the reset button System check During the initial power up of this unit it will go through a system check procedure This proce dure verifies any devices connected through CeNET Any additional CeNET devices plugged into the unit after the initial power up will initiate the system check procedure When the power is turned on SYS CHECK appears in the display if the wire connections were modified The system check starts automatically within the unit N Selecting a mode 1 Turn the SOURCE knob to change the op eration mode Each time you turn the SOURCE knob the operation mode changes in the following or der Radio mode CD MP3 mode CD changer mode DVD changer mode TV mode AUX mode Radio mode External equipment not connected through CeNET will not be displayed 10 WXZ466MP Note Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Adjusting the volume 1 Turn the VOLUME knob to adjust the vol ume The volume level is from 0 minimum to 33
31. oaded upside down Eject the disc then reload it properly ERROR 2 A DISC inside the DVD changer is not loaded properly This is a failure of DVD mechanism and con sult Clarion dealer ERROR 3 A DISC cannot be played due to scratches etc Retry or replace with a non scratched disc ERROR 6 A DISC inside the DVD changer cannot be played because it is loaded upside down Eject the disc then reload it properly DVD changer ERROR P Parental level error Set the correct Parental level ERROR Region code error Eject the disc and replace correct region code disc If an error display other than the ones described above appears press the reset button If the problem persists turn off the power and consult Clarion dealer 28 WXZ466MP 10 SPECIFICATIONS FM Tuner Frequency Range 87 0 MHz to 108 0 MHz Usable Sensitivity 9 dBf 50dB Quieting Sensitivity 15 dBf Alternate Channel Selectivity 70 dB Stereo Separation 1 kHz 35 dB Frequency Response 3 dB 30 Hz to 15 kHz AM Tuner Frequency Range 531 kHz to 1629 kHz Usable Sensitivity 25 uV CD Player System Compact disc digital audio system Usable Discs Compact disc Frequency Response 1 dB 10 Hz to 20 kHz Signal to Noise Ratio 1 kHz 90 dB Dynamic Range 1 kHz 90 dB Harmonic Distortion 0 01 Channel Separation 1 kHz 75 dB Note Audio Maximum Power Out
32. on to select USER In the radio or TV mode Skip this step 4 Press and hold the TITLE button for 1 sec ond or longer to switch to the title input dis play 5 Turn the SEARCH knob to move the cursor 6 Press the BAND button to select a charac ter Each time you press the BAND button the character changes in the following order Capital letters gt Small letters gt Numbers and Symbols gt Umlaut gt Capital let ters 7 Turn the A MODE knob to select the de sired character 8 Repeat steps 5 to 7 to enter up to 10 charac ters for the title 9 Press and hold the SEARCH knob for 2 seconds or longer to store the title into memory and return to the previous mode Clearing titles 1 Play a track or tune in to a radio TV station for which you want to delete the title 2 Do one of the following In the CD or CD changer mode Press the TITLE button to select USER In the radio or TV mode Skip this step 3 Press and hold the TITLE button for 1 sec ond or longer to switch to the title input dis play 4 Press and hold the BAND button for 1 sec ond or longer to delete the title 5 Press and hold the SEARCH knob for 2 seconds or longer to store the setting and return to the previous mode Cellular telephone mute This unit requires special wiring to mute the au dio signal automatically when a cellular tele phone rings in the car This function is not compati
33. ou cannot complete the operation In that case the unit requests you to input the correct PIN 6 Press the ADJ button to return to the previ ous mode 18 WXZ466MP PIN Personal Identification Number check in the CATS Mode When the main power source is unconnected for battery exchange etc while the CATS mode is on input your PIN 1 Press the DIRECT buttons to input your PIN in 4 digits ACAUTION If you input your PIN wrongly is to be displayed and CATS lock mode is to be en tered You cannot perform any operation for a given period while in the CATS lock mode If your mistakes are less than 6 times the locking time will be for 15 seconds if more than 7 times it will be for 15 minutes If you forget your PIN and enter a wrong PIN you cannot perform any further opera tion Common Operations Display Adjust Mode d the clock 7 Press hold the DISP button for 1 sec ond or longer to switch to the display adjust mode Turn the SEARCH knob to select CLOCK Press the SEARCH knob Turn the SEARCH knob to select the hour or the minute Turn the A MODE knob to set the correct time The clock is displayed in 12 hour format Press the SEARCH knob to store the time into memory Press the DISP button to return to the previ ous mode Note You cannot set the clock when it is displayed with only the ignition on If you drain or remove t
34. ove to the begin ning of the previous track Fast forward fast rewind Fast forward Turn the SEARCH knob right for 1 second or longer Fast rewind Turn the SEARCH knob left for 1 second or longer CD Changer Operations Scan play Scan play locates and plays the first 10 seconds of each track on a disc automatically This func tion continues on the disc until it is cancelled The scan play is useful when you want to select a desired track 1 Press the SCN button 2 To cancel the scan play press the SCN but ton again Disc scan play Disc scan play locates and plays the first 10 seconds of the first track on each disc in the currently selected CD changer This function continues automatically until it is cancelled Disc scan play is useful when you want to select a desired CD 1 Press and hold the SCN button for 1 sec ond or longer 2 To cancel disc scan play press the SCN button again Repeat play Repeat play continuously plays the current track This function continues automatically until it is cancelled 1 Press the RPT button 2 To cancel repeat play press the RPT button again Disc repeat play After all the tracks on the current disc have been played disc repeat play automatically re plays the current disc over from the first track This function continues automatically until it is cancelled 1 Press and hold the RPT button for 1 second or longer 2
35. put 200 W 50 W X 4 ch Continuous Average Power Output 17 W X 4 into 4 Q 20 Hz to 20 kHz 1 THD Bass Control Action 60 Hz 80 Hz 120 Hz 14 dB 12dB Treble Control Action 8 KHz 12 kHz 12 dB 9 Band G EQ 63Hz to 16kHz 1 oct step GAIN 12dB Line Output Level CD 1 KHz 1 8V General Power Supply Voltage 14 4 V DC 10 8 to 15 6 V allowable negative ground Current Consumption Less than 15 A 3A Speaker Impedance 4 Q 4 Q to 8 Q allowable Weight Source unit 5 06 Ib 2 3 kg Weight Remote control unit 1 41 oz 409 including battery Dimensions Source unit 7 Width X 4 Height X 6 5 16 Depth 178 W X 100 H X 160 D mm Dimensions Remote control unit 1 3 4 Width X 4 7 16 Height X 1 2 Depth 44 W X 113 H X 13 D mm Specifications and design are subject to change without notice for further improvement WXZ466MP 29 Clarion Co Ltd 2005 11 All Rights Reserved Copyright 2005 Clarion Co Ltd 280 8289 00
36. r pattern The factory default setting is SCAN 1 Each time you press the SPE ANA button the spectrum analyzer pattern changes in the following order Scan gt Pattern 1 to 7 gt Off gt Scan The bars in the display move downward be fore scanning begins Setting the G EQ Graphic Equalizer This adjustment can only be performed when the DZE is set to DZE OFF The factory default setting is 1 Press and hold the A MODE knob for 1 second or longer to turn on the G EQ effect G EQ appears on the display 2 Press and hold the A MODE knob for 1 second or longer to turn off the G EQ effect G EQ OFF appears on the display Setting the DZE Digital Z Enhancer This unit is provided with 3 types of sound tone effects stored in memory Select the one you prefer The factory default setting is DZE OFF Each time you press the D Z button the tone effect changes in the following order DZE 1 DZE 2 DZE 3 DZE OFF gt DZE 1 DZE 1 suitable for the genuine speakers DZE2 suitable for separate speakers DZE3 suitable for coaxial speakers DZE OFF no sound effect Notes The volume changes each time the DZE Digital Z Enhancer setting is switched Sufficient effects cannot be obtained with some speaker systems In such cases adjust the vol ume Adjusting the tone Press the A MODE knob and select the item to adjust Each tim
37. returns to normal temperature WEBUORUDUS TS BR ole FS SoA SH Slo A Speo IFAD FE Alot Ae SAN sie ch sis HHE Note Be sure to unfold this page and refer to the front diagrams as you read each chapter it BEDALE EEGA P8H EMERE F 0 289 0 2 28 SIE TS YTA 5 WXZ466MP 4 NOMENCLATURE Notes Be sure to read this chapter referring to the front diagrams of chapter 3 CONTROLS on page 5 unfold Names of the Buttons and their Functions CD SLOT CD insertion slot IR Receiver Receiver for remote control unit Operating range 30 in all directions 4 button Ejects a disc Press and hold for 1 second or longer to eject all discs DISP button Switches the display indication main display title dis play and clock display Press and hold for 1 second or longer to switch to the display adjust mode VOLUME knob Turn to adjust the volume RDM button Performs random play while in the CD MP3 mode Press and hold for 1 second or longer to perform all random play RPT button Repeats play while in the CD MP3 mode Press and hold for 1 second or longer to perform all repeat play SOURCE knob PUSH POWER Turn to switch the operation mode among the radio mode etc Press to turn on the power Press and hold for 1 second
38. rm random play 2 To cancel random play press the RDM but ton again All random play This function allows you to play all the tracks of all discs or folders in a random order 1 Press and hold the RDM button for 1 sec ond or longer to perform all random play 2 To cancel all random play press the RDM button again WXZ466MP 17 Common Operations CATS function Clarion Anti Theft System This unit can deter theft by checking registered optional PIN Personal Identification Number POM to register delete PIN Press the ADJ button to switch to the adjust mode 2 Turn the SEARCH knob to select CODE 3 Press the SEARCH knob When registering ETRY 0000 appears When deleting DEL 0000 appears 4 Press the DIRECT buttons to input optional PIN in 4 digits A CAUTION Establish your PIN by combining numbers from 1 to 6 as you like in 4 digits Do not forget your PIN for you cannot per form any further operation without your PIN when you remove the battery for repair etc Write down your PIN for the future use 5 Press and hold the SEARCH knob for 2 seconds or longer to enter the PIN Note When registering PIN is completed the unit en ters the CATS mode If ACC is set to ON from OFF or if the power is turned on while in the CATS mode CODE appears in the display for 2 seconds and the unit starts up If you input wrong number when deleting your PIN y
39. s logo are trademarks or registered trademarks of Microsoft Corporation in the United States and or other countries To disable DRM Digital Rights Manage ment 1 When using Windows Media Player 9 click on TOOL gt OPTIONS MUSIC RECORD tab then under Recording settings unclick the Check box for RECORD PROTECTED MUSIC Then reconstruct files 2 When using Windows Media Player 10 click on TOOLS gt OPTIONS gt RIP MUSIC tab then under RIP SETTINGS unclick the Check box for COPY PROTECT MUSIC Then reconstruct files Personally constructed WMA files are used at your own responsibility Precautions when creating MP3 WMA disc Usable sampling rates and bit rates 1 MP3 Sampling rate 11 025 kHz 48 kHz Bit rate 8 kbps 320 kbps VBR 2 WMA Bit rate 48 kbps 192 kbps OG File extensions 1 Always add a file extension MP3 or to or WMA file by using single byte letters If you add a file extension other than specified or forget to add the file exten sion the file cannot be played CD MP3 WMA Operations 2 Files without MP3 WMA data will not play The indication appears in the play time display if you attempt to play files with out MP3 WMA data Logical format File system 1 When writing MP3 WMA file on a CD R disc or CD RW disc please select ISO9660 level 1 2 or JOLIET or Romeo as the writ ing software format Normal play may not be possible if
40. store function is engaged and the unit starts stor ing stations Instant station recall ISR Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button The ISR function even oper ates with the unit in other modes ISR memory 1 Select the station that you wish to store in ISR memory 2 Press and hold the ISR button for 2 seconds or longer Recalling a station with ISR In any mode press the ISR button to turn on the radio function and tune the selected radio station ISR appears in the display Press the ISR button again to return to the previous mode 14 WXZ466MP CD MP3 WMA Operations MP3 WMA What is MP3 MP3 is an audio compression method and clas sified into audio layer 3 of MPEG standards This audio compression method has penetrated into PC users and become a standard format This MP3 features the original audio data com pression to about 10 percent of its initial size with a high sound quality This means about 10 music CDs can be recorded on a CD R disc or CD RW disc to allow a long listening time with out having to change CDs What is WMA WMA is the abbreviation of Windows Media Au dio an audio file format developed by Microsoft Corporation Notes If you play a file with DRM Digital Rights Man agement for WMA remaining ON no audio is output The WMA indicator blinks e Windows Media and the Window
41. tails see the section TV Operations DIRECT buttons Stores a station into memory or recalls it directly ADJ button Press and hold for 1 second or longer to switch the TV picture mode or VTR external picture mode SEARCH knob PUSH PS AS gt Il ENT Turn to select a station Press to perform preset scan Press and hold for 2 seconds or longer to perform auto store BAND button Switches the band Press and hold for 1 second or longer to switch seek or manual tuning WXZ466MP 5 REMOTE CONTROL Receiver for remote control unit CHANGER PLAYER larion MP3 WMA FILE PLAYABLE MOS FET 50W x 4 5 Operating range 30 in all directions Remote control unit Signal transmitter SRC BND rit a IV lt gt IMuurEl 2 DISP We ISR t Q Gr rpm SCN J RPT Clarion Inserting the Battery Turn over the remote control unit and slide the cover in the direction indicated by the arrow in the illustration Insert the battery CR2025 into the insertion guides with the printed side facing upwards 8 Press the battery in the direction indicated by the SA arrow so that it slides into the compartment ES Replace the cover and slide in until it clicks into place Notes Misuse may result in rupture of the battery producing leakage of fluid and resul
42. the de sired DIRECT button to select that station Press and hold one of the DIRECT buttons for 2 seconds or longer to store the current station into preset memory Manual memory 1 Select the desired station with seek tuning manual tuning or preset tuning 2 Press and hold one of DIRECT buttons for 2 seconds or longer to store the current sta tion into preset memory TV Operations Auto store Auto store selects 6 TV stations automatically and stores each one into preset memory If the 6 stations with good reception are avail able stations previously stored in memory re main Only stations with strong reception are stored into memory 1 Press the BAND button and select the de sired TV band TV1 or TV2 2 Press and hold the SEARCH knob for 2 seconds or longer The stations with good re ception are stored automatically to the preset channels Preset scan Preset scan allows the user to view each preset position before it automatically advances to the next preset This function is useful for searching for a desired TV station in memory 1 Press the SEARCH knob 2 When the desired station is found press the SEARCH knob again to remain tuned to that station Note Do not press and hold the SEARCH knob for 2 seconds or longer Doing so will trigger the auto store function and start storing stations into memory Setting the TV area When you select the TV area TV reception are
43. the disc is recorded on another format 2 The folder name and file name can be dis played as the title during MP3 WMA play but the title must be within 128 single byte alpha betical letters and numerals including an ex tension 3 Do not affix a name to a file inside a folder having the same name Folder structure 1 Adisc with a folder having more than 8 hier archical levels will be impossible Number of files or folders 1 Up to 255 files can be recognized per folder Up to 500 files can be played 2 Tracks are played in the order that they were recorded onto a disc Tracks might not al ways be played in the order displayed on the PC 3 Some noise may occur depending on the type of encoder software used while recording Multisession function When a disc contains both normal CD type tracks and MP3 WMA type tracks mixedly you can se lect which type of the recorded tracks to play Default value is CD Each time you press and hold the BAND but ton for 1 second or longer the mixed mode is switched between CD type and MP3 WMA type 1 Types of recording that can be played are as follows Mixed with CD and Play MP3 WMA Play CD MP3 WMA type tracks CD type track only Play CD MP3 WMA type track only Play MP3 WMA Play MP3 WMA 2 After making these settings remove the disc and then reinsert it in case of one disc 3 When a mixed mode CD is loaded and CD is set the track
44. ting in personal injury or damage to surrounding materials Always follow these safety precautions Insertion guide Use only the designated battery When replacing the battery insert properly with polarities oriented correctly Do not subject battery to heat or dispose of in fire or water Do not attempt to disassemble the battery Dispose of used batteries properly 8 WXZ466MP Functions of the Remote Control Unit Buttons Mod Switches among radio CD MP3 CD changer DVD changer TV and CD changer DVD changer UX Switches reception band Moves the next disc in increasing order Switches reception band a v Increases and decreases volume in all modes lt q gt gt Moves preset channels up and down Moves tracks up and down When pressed and held for 1 second or longer Fast forward fast rewind Moves preset channels up and down gt No function Switches between playback and pause No function MUTE Turns mute on and off ISR DISP Recalls ISR radio station in memory When pressed and held for 2 seconds or longer Stores current station into ISR memory radio mode only Switches among main display title display and clock display When pressed and held for 1 second or longer Switches the titles except in the radio DVD changer TV mode SCN Preset scan When pressed and held for
45. y cellophane tape or other glue on it or with peeling off marks If you try to play such a compact disc you may not be able to get it back out of the CD player or it may damage the CD player Roughness Do not use compact discs that have large scratches are misshapen cracked etc Use of Such discs may cause misoperation or damage To remove a compact disc from its storage case press down on the center of the case and lift the disc out holding it carefully by the edges Do not use commercially available CD protection sheets or discs equipped with stabilizers etc These may damage the disc or cause breakdown of the inter nal mechanism Storage Do not expose compact discs to direct sunlight or any heat source Do not expose compact discs to excess humidity or dust Do not expose compact discs to direct heat from heat ers Cleaning To remove fingermarks and dust use a soft cloth and wipe in a straight line from the center of the compact disc to the circumference Do not use any solvents such as commercially avail able cleaners anti static spray or thinner to clean compact discs After using special compact disc cleaner let the com pact disc dry off well before playing it A WARNING About a Single CD 8cm CD Since the unit is not compatible with a single CD do not load it into the unit Keep in mind the fact that a single CD cannot be played even using a single CD adaptor for
Download Pdf Manuals
Related Search