Clarion Model RK1 User's Manual
Contents
1. the engine will start when the WAIT TO START indicator on the vehicle s dash goes out 4 Once the vehicle has started it will run for the pre programmed period of time either 12 24 or 60 minutes see Programming Options section of this guide or until a shutdown input is triggered 11 When you are ready to drive the vehicle OFF 1 Insert the ignition key and turn it to the RUN not the START po 2 G sition 2 Press the brake pedal Note If the brake pedal is pressed before the key is in the ON posi tion the engine will shut down While the vehicle is running during remote engine start operation the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut down inputs e The brake pedal is pressed The hood is opened The shutdown toggle switch is put into the OFF position The pre programmed run time 12 24 or 60 minutes has elapsed Remote button k is pressed twice in 3 seconds to start the vehicle 12 take over mode The Override take over feature allows the vehicle to remain running after the key has been removed from the ignition This feature is use ful for occasions when you wish to exit and lock the vehicle for short periods of time but would like to leave the motor running and the cli mate controls on To perform Take over mode 1 Before turning off the engine press and release k on the r2. 4 4 4 lt lt lt lt lt lt lt lt lt lt lt 4 4 2 what is included 0 cece eee eee eens 3 important information lt 4 44 4444 lt lt lt 3 system maintenance 0 02020202020 3 FC C IDINOtiCe L hn a Z ran 4 remote functions 0 0 000 ttt 4 standard configuration 2345 13384 G6 ddd tatik a h nA ad as 5 using your SYSTEM ea ea teens 6 Warning Safety Tis iria de REA ee 6 locking PARS R R A tre been ase ee ah 4 eee s 8 A et te et a A 9 disabling the starter kill without a remote lt 9 override Mode ie z S a Pee awe Ree ee EEES 10 panie Mu dat da ia A 10 remote engine start 11 take over MOdE iy zis kn PO PS DARE an POPR a k n Z 13 SHOT rUn t r DO 2 3 8 ors A NA dann 13 timer Mode iii a a Sopka uk aes 14 starter anti grind circuity 244440000 15 disabling the remote engine start system lt lt 15 POWEI UP ocre a vue A KE 16 programming options 2 16 glossary of terms lt 2 aea 18 convenience expansions lt 4 4 4444 19 DOTES iris s V A A Savy su OJ ae ad onde edo 21 standard configuration A controls the Lock Panic ON Panic OFF function 3 m e controls the Unlock function jes 5 U controls Silent Lock Unlock and an Auxiliary Output KJ controls remote engine start at wil EY controls Timer mode AUX k controls Turbo Short Run AUX D
3. Use of this product in a standard transmission vehicle is dangerous and contrary to the product s intended use remote functions se The receiver uses a computer based learn routine to learn the remote buttons This makes it possible to assign any specific remote button or combination of buttons to any receiver function The remote initially comes programmed with the Standard Configuration but may also be customized by an authorized dealer The remote buttons indicated in all of the instructions in this manual correspond to a Standard Configuration remote standard configuration A Button The lock and panic functions are controlled by pressing A on the remote for one second Button The unlock function is controlled by pressing N on the remote for one second AUX Button Silent Lock Unlock and an optional auxiliary function are controlled by this button in conjunction with the A or d button An optional auxiliary function such as trunk release can be controlled by pressing this button for 1 5 seconds The auxiliary output controls k Button The remote engine start function of your system is controlled by press ing this button twice within 3 seconds and Buttons An optional auxiliary convenience or expansion function that you have added to your system can be activated by pressing these buttons simultaneously The auxiliary output controls using your system eee warning safety first The following s
4. if the door locks are con nected and activates the starter kill The horn will honk if connected and the parking lights will flash once to confirm arming of the system While the system is locked the status LED will flash once per second The Starter Kill if installed will also prevent the vehicle s starter from cranking The system can also be programmed to arm the optional Starter Kill automatically called Passive Mode If the system has been pro grammed for Passive Mode the Starter Kill will automatically activate 30 seconds after the ignition has been turned off After the ignition has been turned off the status LED will flash rapidly to indicate that the sys tem is in Passive Mode If Passive Mode has been programmed on then it is also possible to pro gram the system for Passive Locking With Passive Locking the vehicle doors lock automatically at the same time that the Starter Kill is acti vated If Passive Locking is programmed on care must be taken to pre vent the keys from being locked in the vehicle NOTE For Passive Mode to be effective the Starter Kill relay must be installed unlocking Pressing d for one second unlocks the doors if connected The horn will honk twice if connected and the parking lights will flash twice to confirm unlocking of the system The optional Starter Kill will be deac tivated The status LED will turn off unless the system is programmed for Passive Mode In Passive Mode the sta
5. starter kill however installation may require additional labor LED A blue light mounted at a discretionary location inside the vehi cle It is used to indicate the status of your system Remote A hand held remote control which operates the various functions of your system Override Switch A small push button mounted at a discrete location inside the vehicle It is used to override the Starter Kill when a remote is lost or damaged or to enter or exit override mode 18 convenience expansions o o o Listed below are some of the many expansion options available for use with your system Some options may require additional parts and or labor Please consult with your dealer for a complete list of options available for use with this system Domelight Supervision The domelight will illuminate for 30 seconds each time the system is disarmed using the remote This is useful for seeing inside the vehicle at night prior to entering it Power Door Lock Control Your system is capable of controlling many types of power door lock systems however some door lock systems may require extra parts Consult with your dealer to determine which type of locks your vehicle uses If power locks are connected the sys tem can be programmed to lock the doors automatically 30 seconds after the ignition has been turned off The system can also be pro grammed to lock the doors when the ignition is turned on and to unlock them whe
6. ModelRKT gt Owner s Guide limited lifetime consumer warranty gt This Ungo Pro Security system is warranted against defects in material and workmanship The main unit is covered by this limited lifetime warranty This Limited Lifetime Warranty applies to Ungo Pro Security systems that have been installed by an authorized Ungo Pro Security dealer This warranty is to the Original Purchaser Owner and to the original vehicle in which it was installed into This warranty is not transferable to any subsequent owner s of the product s Warranty Program Main Unit Limited Lifetime Remote Controls One year from date of purchase Siren One year from date of purchase Shock Sensor One year from date of purchase LED One year from date of purchase Override Switch One year from date of purchase The Warranty does not cover batteries or products deemed damaged through alterations or installation It also does not cover products mishandled misused neglected abused water damaged or with removed altered serial numbers PROOF OF PURCHASE WILL BE REQUIRED FOR WARRANTY SERVICE OF THIS PRODUCT This warranty does not cover the costs incurred for removal or reinstallation of the main unit and or any damage to the vehicle or the vehicle s electrical system The sole responsibility of Clarion Corporation of America Clarion under this Warranty shall be limited to the repair or replacement of the product at the sole discre
7. afety warnings must be observed at all times Due to the complexity of this system installation of this product must only be performed by an authorized dealer When properly installed this system can start the vehicle via a com mand signal from the remote Therefore never operate the system in an enclosed area or partially enclosed area without ventilation such as a garage When parking in an enclosed or partially enclosed area or when having the vehicle serviced the remote engine start system must be disabled using the installed toggle switch It is the user s sole respon sibility to properly handle and keep out of reach from children all remotes to assure that the system does not unintentionally remote engine start the vehicle THE USER MUST INSTALL A CARBON MONOXIDE DETECTOR IN OR ABOUT THE LIVING AREA ADJA CENT TO THE VEHICLE ALL DOORS LEADING FROM ADJACENT LIVING AREAS TO THE ENCLOSED OR PARTIALLY ENCLOSED VEHI CLE STORAGE AREA MUST AT ALL TIMES REMAIN CLOSED These precautions are the sole responsibility of the user Use of this product is intended only for automatic transmission vehicles Use of this product in a manner contrary to its intended mode of operation may result in property damage personal injury or death 1 Never remotely start the vehicle with the vehicle in gear and 2 Never remotely start the vehicle with the keys in the ignition The user must also have the neutral safety feature of the vehicle period
8. emote twice in 3 seconds or press and release the optional momentary switch The parking lights will flash for confirmation 2 Turn the ignition key to the OFF position The engine will stay running 3 The engine will run until the pre programmed time elapses or a shut down input is received See the previous remote engine start section for a complete list of shut down inputs NOTE This feature will not work if the brake pedal is being pressed short run turbo Short run turbo mode keeps the engine running after arriving at you destination for a programmable period of 1 3 5 or 10 minutes This allows the system s timer to conveniently cool down the turbo after you have left the vehicle To activate 1 Park the vehicle and set parking brake 2 Remove your foot from the brake pedal and leave the engine running 13 Press and release the K and aux buttons at the same time 4 The lights will flash to indicate the remote engine start has entered short run turbo mode 5 Turn off the key the engine will keep running 6 Exit and secure the vehicle 7 The engine will turn off after the programmed run time timer mode By pressing the remote A and EN buttons the parking lights will flash 4 times and then start the vehicle and run for the set duration The remote engine start can be shut off by the remote by pressing the remote engine start button and remain in timer mode but if any other shut down zones
9. ically checked wherein the vehicle must not remotely start while the car is in 6 gear This testing should be performed by an authorized dealer in accor dance with the Safety Check outlined in the product installation guide If the vehicle starts in gear cease remote engine start operation imme diately and consult with the authorized dealer to fix the problem e After the remote engine start module has been installed contact your authorized dealer to have him or her test the remote engine start module by performing the Safety Check outlined in the product instal lation guide If the vehicle starts when performing the Neutral Safety Shutdown Circuit test the remote engine start unit has not been prop erly installed The remote engine start module must be removed or the installer must properly reinstall the remote engine start system so that the vehicle does not start in gear All installations must be performed by an authorized dealer OPERATION OF THE REMOTE START MODULE IF THE VEHICLE STARTS IN GEAR IS CONTRARY TO ITS INTENDED MODE OF OPERATION OPERATING THE REMOTE START SYSTEM UNDER THESE CONDITIONS MAY RESULT IN PROPERTY DAMAGE OR PERSONAL INJURY YOU MUST IMMEDIATELY CEASE THE USE OF THE UNIT AND SEEK THE ASSISTANCE OF AN AUTHORIZED DEALER TO REPAIR OR DISCONNECT THE INSTALLED REMOTE START MODULE UNGO WILL NOT BE HELD RESPONSIBLE OR PAY FOR INSTALLATION OR REINSTALLATION COSTS locking Pressing A for one second locks the doors
10. ide mode and will turn off if you are exiting override mode panic mode If you are threatened in or near your vehicle you can attract attention by triggering the system with your remote Just press E for 1 5 sec onds to enter panic mode In panic mode the horn will honk and the parking lights will flash for 30 seconds To stop panic mode at any time press a or A on the remote NOTE In order for panic mode to be effective the vehicles horn or optional siren as well as the vehicle s parking lights must be connected 10 remote engine start This feature allows you to remotely start and run your vehicle for a pro grammable period of time This makes it possible to warm up the engine as well as adjust the interior temperature of the vehicle with the climate control system If interior heating or cooling is desired the climate controls must be preset and the fan blower must be set to the desired level prior to remote engine starting the vehicle IMPORTANT 1 This product is not for use in manual transmissions 2 Never remotely start the vehicle with the key in the ignition To remote engine start the vehicle 1 Press the k button twice within 3 seconds on the remote 2 The parking lights will flash to confirm that the vehicle will attempt to start 3 Release the k button as soon as the parking lights flash In gasoline vehicles the engine will start 4 seconds after the parking lights flash In diesel vehicles
11. n the ignition is turned off Power Trunk Release The system s auxiliary output can be pro grammed to operate a factory power release for the vehicle s trunk or hatch If the factory release is not power activated trunk release sole noid can often be added 19 Power Window Control Power window control can be provided by one of two systems The firsts system provides control that will roll up two windows automatically when the system is armed or roll two win dows down by using the remote The second system will roll two win dows both up and down This second system also provides one touch switch operation Progressive Door Unlocking For added security your system can be configured to unlock the driver s door only leaving the passenger doors locked Pressing the unlock button an additional time will unlock the passenger doors This option requires additional parts and labor 20 21 22 Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet PA nn DO QUICK REFERENCE GUIDE To lock using your remote E To lock the system press A for one second The doors will lock if con nected The LED will begin to flash The Starter Kill will prevent the vehicle s starter from cranking if it has been installed The vehicle s horn if connected will honk and the parking lights will flash once to con firm activation of the system To unlock using your remote E To unlock the sy
12. o controls Channel 4 output what is included Control module Receiver antenna Two four button remotes Blue status LED indicator light Push button Override switch Shut down toggle switch important information Congratulations on the purchase of your remote engine start keyless entry system Due to the complexity of this system it must be installed by an authorized dealer only Installation of this product by anyone other than an authorized dealer voids the warranty By carefully reading this Owner s Guide prior to using your system you will maximize the use of this system and its features system maintenance The system requires no specific maintenance Your remote is powered by a small lightweight 3 volt lithium battery that will last approximate ly one year under normal use When the battery begins to weaken operating range will be reduced and the LED on the remote will dim FCC ID notice This device complies with Part 15 of FCC rules Operation is subject to the following conditions 1 This device may not cause harmful inter ference and 2 This device must accept any interference received including interference that may cause undesirable operation Changes or modifications not expressly approved by the party responsi ble for compliance could void the user s authority to operate this device CAUTION This product is designed for fuel injected automatic trans mission vehicles only
13. or the ignition becomes active the timer mode will cancel 1 Press Timer mode buttons The vehicle will confirm with 4 parking light flashes A 1 second delay will start Pee h The system will start the car and will run for the specified dura tion unless shut down by the remote engine start button If shut down with the remote start button k the system will remain in timer mode 5 The system will start every 3 hours until canceled by the brake hood or neutral safety shut down wires To exit timer mode turn the ignition switch on any time the engine is running The parking lights will flash 4 times indicating timer mode has been exited 14 6 The system will start every 3 hours until canceled by the brake hood or neutral safety shut down wires important Timer Mode should be used only in open areas Never start and run the vehicle in an enclosed space such as a garage or carport starter anti grind circuity Whenever the vehicle is remote engine started advanced anti grind cir cuitry prevents the starter from engaging even if the key is turned to the start position This prevents damage to the starter motor if the key is turned to the start position during remote engine start operation NOTE Anti grind circuitry only works when the remote engine start sys fem is operating the motor and the Starter Kill relay is installed disabling the remote engine start system This feature allows your system
14. r to turn on the parking lights constantly dur ing the entire remote engine start operation Passive Mode or Active Mode In Passive Mode the Starter Kill will automatically activate 30 seconds after the ignition has been turned off 16 ignition switch controlled door locking on or off With this feature on the doors will lock 3 seconds after the ignition key is turned on and unlock when the ignition key is turned off Passive Locking or Active Locking doors lock only with the remote With Passive Locking the vehicle doors lock automatically 30 seconds after the ignition has been turned off Passive Locking can only be selected when the system has been programmed for Passive Mode The horn honk confirmations for locking and unlocking can be programmed on or off In order for this feature to be programmed on the horn must be connected to the system 17 glossary of terms o ooo Control Unit The brain of your system Usually hidden underneath the dash area of the vehicle It houses the microprocessor which mon itors your vehicle and controls all system functions Starter Kill An automatic switch controlled by your system which pre vents the vehicle s starter from cranking whenever the system is acti vated The vehicle is never prevented from cranking when the system is deactivated in override mode or if the starter kill switch itself fails Your system has feature ready circuitry for the
15. s remote engine start unit to be tem porarily disabled to prevent the vehicle from being remote started acci dentally This feature is useful if the vehicle is being serviced or stored in an enclosed area To disable the remote engine start move the shutdown toggle switch to the OFF position The switch can be installed in a location of your choice Check with your installer for recommended locations LOCATION OF SHUTDOWN SWITCH 15 power up gt o gt gt o o o oS This system will store its current state to non volatile memory If power is lost and then reconnected the system will recall the stored state from memory This means if the unit is in override mode and the battery is disconnected for any reason such as servicing the car when the bat tery is reconnected the unit will still be in override mode This applies to all states of the system including lock unlock and override mode programming options ses Programming options control your system s normal operational set up Most options do not require additional parts but some may require additional installation labor This system s programming options are listed below with the factory default settings in bold 12 24 or 60 minute run time Your system can be programmed to allow the vehicle to run for 12 24 or 60 minutes when remote engine started or in Timer Mode e Parking lights flashing or constant Your system can be pro grammed to either flash o
16. stem press E for one second The doors will unlock if connected The Starter Kill will be deactivated and the vehicles horn if connected will honk twice and the parking lights will flash twice Disabling the Starter Kill without a remote E Turn on the ignition Press and release the Override switch within 10 seconds The LED will stop flashing and the vehicle should start Be sure to check with the installer for the location of the Override switch To remote engine start the vehicle E Press k twice within 3 seconds The parking lights will turn on if con nected and the vehicle will start and run for the programmed amount of time To enter or exit override mode E Turn the ignition to the ON position Turn the ignition back off Press and release the Override switch within 10 seconds The status LED will light continuously if you have entered override mode To exit override mode repeat the steps above The LED will turn off when exiting override mode To activate panic mode E Press and hold A for 1 5 seconds To disable the remote engine start system E To disable the remote engine start move the shutdown toggle switch to the OFF position Location of Shutdown Switch 23 Get Started Get Protected A CLARION COMPANY Ungo Pro Security 661 W Redondo Beach Blvd Gardena Ca 90247 800 GO CLARION 2003 Directed Electronics Inc All rights reserved GRK1 10 03
17. tion of Clarion If it becomes necessary to send the product or any defective part to Clarion the product must be shipped in its original carton or equivalent carton fully insured with shipping charges prepaid Clarion will not assume any responsibility for any loss or damage incurred in shipping ALL IMPLIED WARRANTIES EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW SHALL HAVE NO GREATER DURATION THAN THE WARRANTY PERIOD SET FORTH ABOVE UNDER NO CIRCUMSTANCES SHALL CLARION CORPORATION BE LIABLE FOR ANY LOSS OR DAMAGE DIRECT OR CONSEQUENTIAL ARISING OUT OF THE USE OR INABILITY TO USE OF THE PRODUCT BECAUSE SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLU SIONS OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE THE OTHER RIGHTS WHICH VARY FROM STATE TO STATE Should you have any difficulties with the performance of this product during warranty please call 1 800 GO CLARION or visit your local Ungo Pro Security dealer You may also contact the National Service Manager at the following address below for additional service help you may need Clarion Corporation of America Attn National Service Manager 661 W Redondo Beach Blvd Gardena Ca 90247 table of contents limited lifetime consumer warranty ooococcccoccnco i standard configuration
18. tus LED will flash rapidly when the system is disabled This indicates that the system will re engage the starter kill and re lock the doors if Passive Locking has been programmed in 30 seconds unless the ignition is turned on disabling the starter kill without a remote If your remote is lost or damaged you can manually override the starter kill To do this you must have the vehicle s ignition key and know where the Override switch is located Be sure to check with the installer for the location of the Override switch To override the starter kill turn the ignition on and press the A Override switch within 10 sec 7 onds The status LED will stop lt flashing and the vehicle should start If it does not start you may have waited too long turn the ignition off and repeat the process LOCATION OF OVERRIDE SWITCH override mode You can prevent your system from automatically activating the Starter Kill and locking the doors by using override mode This is very useful when washing the vehicle or having it serviced In override mode the starter kill cannot be activated even with the remote but all conve nience functions door locks remote engine start etc will continue to work normally To enter or exit override mode Turn the ignition on 1 N 2 Turn the ignition off S o 3 Press and release the Override ems switch within 10 seconds The status LED will light continuously if you are entering overr
Download Pdf Manuals
Related Search