Citizen ANA-DIGI JMOXXX User's Manual
Contents
1. gt Water resistant characteristics air tank z Non water resistant must be kept away from water Ordinary water resistance can withstand light spray perspiration light rain etc during daily use Suitable for skin diving Suitable for scuba diving 6 Keep watch clean A watchband gets easily dirty with the sweat or dust since it directly touches the skin and evena Stainless or gold plated band may sometimes get rust in the long run if it is left dirty For a mesh band because the meshes are very fine its particularly flexibility will be lost if it is soiled in a long period of use In this respect it is necessary to wash a metallic watch band periodically in order to keep the band beautiful at all times A metallic watch band is usually washed with a brush in soapy water After that it is well wiped with the soft cloth having good water absorption properties to get rid of the water content Then the band is dried completely Please pay attention to prevent the water from getting inside the watch movement when the band is washed 7 Periodic Inspection Periodic Inspection of the watch at intervals of 1 to 2 years are recommended 8 Be sure to keep the power cell away from infants or small children should accidental ingestion occur consult a doctor at once 10 SPECIFICATIONS 1 2 3 Model Name CITIZEN QUARTZ Combination Quartz watch Quartz oscillator frequency 322. 768Hz Accuracy when worn under normal temperature Within 30 seconds per month Display types Analog Hours Minutes and Seconds Hand Digital FE type nematic liquid crystal Digital display method Push button operated change over display Time Hours Minutes Seconds AM PM A P Calendar Month Date Day Alarm Hours Minutes AM PM A P Stopwatch Minutes Seconds 1 100 second 60 minutes counter Additional features e Chime Automatic calendar Preset for February 28 12 24 hour display Sound Monitor Illumination lamp Power Cell One small silver oxide power cell with a life of approximately three years after replacing of new battery Cal C480 approximately two years and Cal T011 approximately one year and half Specifications are subject to change without notice
3. WATER R RESISTANT WATER WATER foorisom RESISTANT Aant WATER 200M or DEEPER RESISTANT WATER RESISTANT may sometimes be abbreviated as WATER RESIST Water resistant 2 Avoid Extremes of Temperature Avoid exposing this watch to direct sunlight or leaving it in a high temperature location for a long period of time This will cause malfunctioning and shorten the life of the power cell and liquid crystal display panel Do not leave this watch for long periods in a cold place This may cause the watch to gain or lose slightly If it is worn on the wrist the Original accuracy will be restored 3 Avoid Strong Shocks This watch will withstand normal shock incurred while playing golf or other sports Avoid dropping it on the ground or otherwise imparting a severe shock to it 4 Avoid Strong Magnetic Fields This watch is unaffected by magnetic fields from domestic appliances such as television and stereo sets 5 Avoid chemicals and gases Avoid wearing this watch in the presence of chemicals and gases Be careful of using chemicals Solvents such as benzene and paint thinner and products containing such solvents such as gasoline manicure remover certain cleaners and adhesives may cause discolouration melting and bracking gt Skin diving Can be worn swimming but not while diving Always set the crown in the normal position Tighten screwlock crown completely Diving without KA
4. CALENDAR display will show the 1st day of the next month when returned to the normal display ex February 31 March 1 e The CALENDAR function includes automatic month end adjustment but in the leap year changeover for February to March must be made manually The Cal C20 doesn t display the CALENDAR mode mark 7 SETTING THE CHIME AND SOUND MONITOR e Press and button simultaneously in the normal TIME or normal CALENDAR mode the CHIME can be set ON or OFF each time the buttons are pressed and the CHIME set mark will be indicated The SOUND MONITOR is conducted at the same time when the buttons are pressed Sy CHIME set mark 8 BATTERY REPLACEMENT RESET e Press the M and buttons simultaneously following battery replacement operations to reset the watch Failure to reset the watch after battery replacement will result in improper timekeeping e Pressing all three buttons simultaneously will cause the watch display to highlight and a confirmation signal to sound indicating the reset operation is complete Upon reset the watch displays will return to the following initial settings Time AM 12 00 00 Alarm AM 12 00 00 OFF Stopwatch 00 00 00 Calender Sunday January 1 Chime OFF 9 SPECIAL HANDLING INSTRUCTIONS 1 Resistance to water Indication Water related use gt Sorte A S iration cane Ufa light rain S27 bathing etc g WATER RESISTANT C Riia
5. CITIZEN QUARTZ ANA DIGI Model No 30 7XXX JMOXXX Cal No C20 C480 T011 e INSTRUCTION MANUAL CTZ 6751 Cal No C480 TO11 Cal No C20 X 1 SELECTING BASIC FUNCTIONS Press M button to select functions TIME gt ALARM gt STOPWATCH gt CALENDAR Hours Crown Har Minutes Date inutes es M tt Calendar mode mark mode mark Chime set mark Minutes Alarm set alarm Seconds mar mode mark Stopwatch e Alarm Stopwatch and calendar modes are indicated by each flashing mode mark e Crown Analog display set M Mode change Instant manual return S Selection Reset Split RQ Adjustment Start Stop Alarm Set Illumination The Cal C20 doesn t have any STOPWATCH or CALENDAR mode mark 2 ADJUSTING THE ANALOG DISPLAY Pull out the crown one step and DAG o i turn clockwise or counterclockwise direction to A adjust the analog time display The seconds hand will start timekeeping synchronising with the digital time display when the crown is returned to the original position 3 ADJUSTING THE DIGITAL TIME DISPLAY TIME 1 Press M button to set to 2 Press button until PE OUST A SECONDS start flashing 3 Press to set seconds to 00 gt 4 Press for MINUTES adjustment MINUTES start flashing 5 Press R and adjust the minutes 6 Press for Hours adjustment HOURS start flashing 7 Pres
6. s Q and adjust the hours 8 Press for 12 24 HOURS selection 12 24 HOURS Starts flashing 9 Press and select 12 or 24 HOUR display 10 Press or M to finalise adjustment The watch returns to the normal TIME display e If the watch is left in the adjustment mode for about one minute without operating any buttons AUTO RETURN will activate to return to the normal TIME display e If seconds adjustment is made when the SECOND display is showing 30 59 seconds the MINUTE display will automatically advance to the next minute e INSTANT MANUAL RETURN to the normal time display can be made at any stage of adjustment by pressing M button e A and P marks display only under the 12 hour time system 4 SETTING AND USING THE ALARM e The setting procedure of the ALARM time is the same as that of the TIME display Setting order is as follows ALARM HOURS MINUTES e The HOURS display will synchronise with the selection of 12 or 24 HOURS in the TIME adjustment e If the watch is left in the adjustment mode for more than 1 minute without operating any button AUTO RETURN will activate to return to the normal ALARM display e INSTANT MANUAL RETURN to the normal ALARM display can be made at any stage of adjustment by pressing M button e Press R button in the normal ALARM mode to set ON or OFF the alarm The ALARM set mark will be indicated e ALARM sounds for 20 seconds at the ALARM set time Alarm bu
7. zzer can be ceased by pressing any button 5 USING THE STOPWATCH Stopwatch operation diagram meser gt STORWATCH STOPWATCH EA RESET ee a TK scare wake SPLIT spLitstop e Confirmation sound will be made each time or R button is pressed in the STOPWATCH mode e The SPLIT COUNTER mode will turn into the STOPWATCH COUNTER mode when it is changed to the other mode while it is in operation e The TIMEKEEPING of the stopwatch will be turned off if the ALARM buzzer is stopped by pressing or button when the watch is in the STOPWATCH COUNTER or SPLIT COUNTER mode While the split display is in use the SPLIT mark or S mark is displayed SPLIT TIME measures the time elapsed after Starting the split time function e The stopwatch measurement capacity is 60 minutes from 0 to 59 59 99 6 ADJUSTING THE CALENDAR CALENDAR gt 1 Press button to set to the normal CALENDAR display 2 Press until DATE starts flashing 3 Press and adjust the date 4 Press for MONTH adjustment MONTH starts flashing 5 Press RQ and adjust the month 6 Press G for DAY adjustment DAY starts flashing 7 Press Q and adjust the day 8 Press or to finalise adjustment The watch returns to the normal CALENDAR display e INSTANT MANUAL RETURN and AUTO RETURN system will activate in the same manner as described in the TIME adjustment e If non existent date is set the
Download Pdf Manuals
Related Search