Chicago Electric 91761 User's Manual
Contents
1. WHITE PVC TRELLIS Mlete 1 91761 ASSEMBLY INSTRUCTIONS Distributed Exclusively by 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2004 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specifications Overall Dimensions 58 5 8 Wide X 27 1 4 Deep X 97 High Bench Max Weight Capacity 200 Lbs White PVC U V treated for Weather Protection Weight 89 Lbs Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using this product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Keep children away Children must never be allowed in the work area Do not let children play on this product without supervision 4 Dress properly2. OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO NOTE Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts SKU 91761 For technical questions please call 1 800 444 3353 Page 6
3. Do not wear loose clothing or jewelry as they can be caught in moving parts Protective electrically nonconductive clothes and nonskid footwear are recommended when working 5 Use eye and ear protection Always wear ANSI approved impact safety goggles when assembling this product 6 Do not overreach Keep proper footing and balance at all times Two or more people are needed to assemble this product 7 Use the right tool for the job Do not attempt to force a small product or attachment to do the work of a larger industrial product There are certain applications for which this product was designed Do not modify this product and do not use this product for a purpose for which it was not intended 8 Stay alert Watch what you are doing use common sense Do not assemble this product when you are tired 9 Check for damaged parts Before using this product any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for loose parts and any other condition that may affect the operation of this product Replace loose or worn parts immediately Any part that is damaged should be properly repaired or replaced by a qualified technician SKU 91761 For technical questions please call 1 800 444 3353 Page 2 10 11 Warning Locate Trelllis in a spot that is flat without an uneven surface away from electrical wires Caution Heavy winds could make the Trelli
4. ars 5 vertical Bars 11 horizontal Support Bar 7 Figure A Figure B SKU 91761 For technical questions please call 1 800 444 3353 Page3 Bars 11 horizontal 5 Choose your location The location site should be a flat even surface three possible set up options 7 The Trellis can be free standing but caution should be taken Always distribute weight evenly on the bench to prevent toppling 2 Stand the Trellis upright and place in 6 deep holes Test that the Trellis is level Pack dirt around Posts 6 3 Place cement in the holes before positioning the Posts 6 Test that the Trellis is level If you are not experienced in setting up this type of product it is recommended that you seek the assistance of a qualified handyman for placement of your Trellis 6 Place the assembled sides of the Trellis flat on the ground nearest to the location With an assistant insert the ladder assembly into the Posts 6 See Figure C Gothic Cap 1 Ladder Assembly Post 6 Figure C sampe Bench 8 Metal Support Bars a Bar 7 Figure D Figure E Figure F 7 There must be metal bars inserted in the two Braces 8 to support the weight placed on the Bench 8 See Figure D Snap the Bench 8 over the Support Bar 7 See Figure F G 8 Tap the Gothic Caps 1 on the end of each Post 6 See Figure C SKU 91761 For technical questions please call 1 800 444 3353 Page 4 9 Place Cov
5. ers 9 not shown over the ends of the ladder that are exposed Place the Covers 10 not shown over the Brace 8 pieces of the Bench Tap into place See Figure F 10 After assembly of the Trellis is complete test that the product is solid and stable before using the Trellis Cover 9 Bench 8 Support over 10 Bar 7 ki Figure G Figure H Parts List ee e 4 X4 Gothic Cap 62 x 2 x 3 1 2 Cross Beam 21 X 1 1 2 x 1 1 2 Bar 47 5 x 13 16 x 1 Bar 89 x 4 x 4 Post 20 1 2 x 2 x 3 1 2 Support Bar 59 x 2 x 6 Bench 2 x 3 1 2 Cover 2 x Cover 25 x 1 1 2 x 1 1 2 x 1 1 2 Bar 3 6 7 8 Po SKU 91761 For technical questions please call 1 800 444 3353 Page5 Assembly Drawing PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT
6. s unstable Always distribute objects on Bench evenly Uneven weight distribution could cause toppling Do not allow children to climb on the Trellis Warning The warnings cautions and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur It must be understood by the operator that common sense and caution are factors which cannot be built into this product but must be supplied by the operator Unpacking When unpacking check to make sure the following parts are included If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual Assembly Instructions Assemble all parts on a smooth surface to avoid scratching These parts fit together and no hardware is required Ladder Assembly Use Cross Beams 2 and Bars 3 to form ladder Set aside See Figure A Side Lattice Assembly Use four Bars 4 horizontally three Bars 5 vertically with two Bars 11 horizontally at the top and bottom to build the lattice assembly Repeat instructions for the second side lattice See Figure B Still working with the parts on the ground fit the Support Bar 7 between the Posts 6 Fit the side lattice assembly between the two Posts 6 Repeat for second side lattice with Posts Be sure all connections are secure See Figure B Post 6 Cross Bars 3 Beams 2 Pinte B
Download Pdf Manuals
Related Search