Chicago Electric 90981 User's Manual
Contents
1. Blower is not a toy 3 Store idle equipment When not in use keep this product in a dry location to inhibit rust Always lock up tools and equipment and keep out of reach of children 4 Do not use this product if under the influence of alcohol or drugs Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs If there is any doubt do not attempt to use this product 5 Dress properly Do not wear loose clothing or jewelry as they can be caught in moving parts Nonskid footwear are recommended when working Wear restrictive hair covering to contain long hair 6 Maintain this product with care Keep tools clean and dry for better performance SKU 90981 Page 2 10 Do not overreach Keep proper footing and balance at all times Always use protection Wear ANSI approved safety impact eye glasses when using this product ANSI approved safety impact eye glasses are available from Harbor Freight Tools When necessary use hearing and breathing protection Wear ANSI approved hearing protectors when using the Vacuum Blower for extended time periods or using it in a noisy work area For dusty operations wear an ANSI approved dust mask ANSI approved hearing protectors and ANSI approved dust masks are available from Harbor Freight Tools Industrial Applications must follow OSHA requirements Stay Alert Watch what you are doing at all times Use common sense Do not use this pro2. off the air flow when the liquid in the Container 20 reaches the full level When this occurs make sure your hands and feet are dry turn OFF the Vacuum Blower at Switch 1 unplug the Power Cord 4 and empty the Container See Figure B and C Motor Housing 3 Hose 21 Vacuum Port Container 20 Bag 19 Figure C Figure B Note When the Ball shuts off the airflow the suction increases and the sound of the Motor becomes higher in pitch due to increased Motor speed TO AVOID DAMAGE TO THE VACUUM BLOWER DO NOT RUN THE MOTOR WITH THE BALL IN THE RAISED POSITION See Figure A and Assy Diagram When finished vacuuming make sure to turn the Switch 1 to its OFF position and unplug the Power Cord 4 from the electrical outlet To Use The Blower 1 NOTE The Vacuum Blower has the capability to blow sawdust dirt sand leaves and other debris out of work areas garages patios driveways etcetera ALWAYS wear ANSI approved safety equipment safety impact glasses dust mask hearing protection when using the Blower NEVER point the Hose 21 in the direction of another person or animal when using the Blower See Figures A B C and Assy Diagram Note Make certain that the vacuum is clean so that there will be no dust ejected when the blower is activated Locate the Blower Port on the Vacuum Blower and insert one end of the Hose 21 into the Port See Figures A B C D and Assy Diagram Turn t
3. replacement parts REV 03 04 SKU 90981 Page 8
4. CHICAGO a Yeyis ey POWer Tools VACUUM BLOWER WET AND DRY 2 2 GAL WNfexe 11 90981 OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd Camarillo CA 93011 Visit our Web site at http www harborfreight com Copyright 2003 by Harbor Freight Tools All rights reserved No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools For technical questions and replacement parts please call 1 800 444 3353 Specification ITEM DESCRIPTION Electrical Requirements 120V 60 Hz 1 5 Peak Horsepower Double Insulated Fan Cooled Motor 1 5 8 diameter X 56 3 4 Long 11 1 4 W X 14 1 4 L X 14 3 4 H Warning For Indoor Use Only Save This Manual You will need the manual for the safety warnings and precautions assembly instructions operating and maintenance procedures parts list and diagram Keep your invoice with this manual Write the invoice number on the inside of the front cover Keep the manual and invoice in a safe and dry place for future reference Safety Warnings and Precautions WARNING When using this product basic safety precautions should always be followed to reduce the risk of personal injury and damage to equipment Read all instructions before using this product 1 Keep work area clean Cluttered areas invite injuries 2 Keep children away Do not allow children to use this product The Vacuum
5. O NOT SUBMERGE THE MOTOR HOUSING 3 IN WATER OR OTHER LIQUIDS 2 Guard against Electric Shock Always prevent body contact with grounded surfaces such as pipes radiators ranges refrigerators etcetera Do not handle any part of the Vacuum Blower with wet hands when the unit is plugged in to its electrical supply source To comply with the National Electric Code NFPA70 and to provide additional protection from the risk of electrical shock this Vacuum Blower should only be connected to a receptacle that is protected by a Ground Fault Circuit Interrupter GFCI 3 Reduce the Risk of fire and or explosion Sparks inside the Motor assembly can ignite flammable vapors liquids and dust Do not use the Vacuum Blower in the presence of any flammable combustible or explosive substances 4 Avoid hazardous vapors and dusts Never use the Vacuum Blower in the presence of toxic materials 5 Do not use the Vacuum Blower as a sprayer Do not use to groom animals 6 Do not vacuum any material that is burning or smoking such as hot ashes lit cigarettes etcetera Avoid vacuuming ashes all together 7 Warning People with pacemakers should consult with their physician s before using this product Operation of equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker 8 Warning This product contains or produces a chemical known to the State of California to cause cancer and birth defects or o
6. duct when you are tired or distracted from the job at hand Check for damaged parts Before using any tool any part that appears damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for damaged parts and any other condition that may affect proper operation Any part that is damaged should be properly repaired or replaced by a qualified technician Do not use the tool if any switch does not turn On and Off properly Replacement parts and accessories When servicing use only identical replacement parts Use of any other parts will void the warranty Only use accessories intended for use with this tool Approved accessories are available from Harbor Freight Tools Use proper size and type extension cord If an extension cord is required it must be of the proper size and type to supply the correct current to the tool without heating up Otherwise the extension cord could melt and catch fire or cause electrical damage to the tool Maintenance For your safety maintenance should be performed regularly by a qualified technician Use the right tool for the job Do not attempt to force a small tool or attachment to do the work of a larger industrial tool There are certain applications for which this tool was designed Do not modify this tool and do not use this tool for a purpose for which it was not intended SKU 90981 Page 3 SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1 D
7. he Switch 1 to its ON position to operate the Blower When finished using the Blower make sure to turn the Switch 1 to its OFF position and unplug the Power Cord 4 from the electrical outlet Figure D SKU 90981 Page 6 INSPECTION MAINTENANCE AND CLEANING 1 CAUTION Always disconnect the Vacuum Blower from its electrical supply source before performing and inspection maintenance or cleaning 2 Before each use inspect the general condition of the Vacuum Blower Check for broken parts damaged power cord and any other condition that may affect its safe operation If a problem with the Vacuum Blower occurs immediately discontinue using the tool and have the problem corrected before further use Do not use damaged equipment 3 Before each use remove the Motor Housing 3 from the Container 20 Empty all debris liquid from the Container Check to make sure the Bag 19 is clean If necessary remove the Rubber Band 18 and Bag from the Ball Basket 17 Clean the Bag Then replace the Bag Rubber Band and Motor Housing 4 Do not use solvents to clean the Vacuum Blower as damage to the tool may occur To clean use a damp cloth If necessary a mild detergent may be used Then completely dry 5 When storing keep the Vacuum Blower in a box or covered with a cloth cover PARTS LIST PART DESCRIPTION ad PART DESCRIPTION a Switch Screw Cap Screw 5 x 18 Motor Housing Worm Cover 8mm Sc
8. ou may place the Hose Attachment 22 over the end of the Hose See Figures A B and Assy Diagram To turn on the Vacuum Blower plug the Power Cord 4 into a 110V 120V 3 prong electrical outlet Then turn the Switch 1 to its ON position See Figures A B and Assy Diagram Motor Housing 3 Switch 1 Power Vacuum Cord 4 Port Blower Port Ball Basket 17 Ball 16 Figure A Note When vacuuming very fine dust or a large amount of dry material it may be necessary to empty the Container 20 and replace Bag 19 at more frequent intervals To do so remove the Motor Housing 3 from the Container 20 Empty all debris from the Container Remove the Rubber Band 18 and Bag from the Ball Basket 17 Clean the Bag Then replace the Bag Rubber Band and Motor Housing See Figures A B and Assy Diagram When finished vacuuming make sure to turn the Switch 1 to its OFF position and unplug the Power Cord 4 from the electrical outlet SKU 90981 Page 5 REV 03 04 To Vacuum Liquids 1 Switch 1 Power Cord 4 Blower Port For Vacuuming liquids it is necessary to remove the Rubber Band 18 and Bag 19 To do so remove the Motor Housing 3 from the Container 20 Empty all debris from the Container Remove the Rubber Band 18 and Bag from the Ball Basket 17 See Figures A B and Assy Diagram The Vacuum Blower is equipped with a Ball 16 which will automatically rise to cut
9. rew 4 X 18 Stator Ball Ball Basket Rubber Band Bag Power Cord Motor Screw 3 x 8 Screw 4 x 16 Motor Fixer Bushing Container Impeller Hose Washer 1 2 3 4 5 6 7 8 9 0 1 sy SS N BR SK Sst Sst IGN _ h k k h ee i gt M 1 1 Hose Attachment PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY NEITHER THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TOTHE BUYERTHAT HE OR SHE IS QUALIFIEDTO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT IN FACT THE MANUFACTURER AND OR DISTRIBUTOR EXPRESSLY STATES THat ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSEDTECH NICIANS AND NOT BY THE BUYER THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO SKU 90981 Page 7 REV 03 04 ASSEMBLY DRAWING Part 16 Part 17 Part 4 Part 5 A rm Part 6 Part 7 Part 8 a l Part 19 Part 9 Part 10 Part 11 _ Part 12 Part 20 Panag Part 14 I a es Pat 21 Part 15 Saas Par 22 NOTE Some parts are listed and shown for illustration purposes only and are not available individually as
10. ther reproductive harm California Health amp Safety Code 25249 5 et seq Unpacking When unpacking check to make sure the following parts Shown on page 7 are included If any parts are missing or broken please call Harbor Freight Tools at the number on the cover of this manual Operation Note For additional references to the parts listed below refer to the Parts List and Assembly Diagram on pages 7 and 8 of the manual SKU 90981 Page 4 To Vacuum Dry Materials 1 Note A dry bag 19 is necessary when vacuuming dry material If the Bag is wet when vacuuming dry material the Bag will clog quickly and become difficult to clean If the Bag is wet dry the Bag before performing dry vacuuming See Figures A B and Assy Diagram To remove the Motor Housing 3 in order to empty the Container 20 or clean or replace the Bag 19 pull outward on the latches located on each side of the Container See Assy Diagram and Figure C When vacuuming make sure the Bag 19 is in the proper position to avoid leaks an or damage to the Vacuum Blower Check to make sure the Bag completely covers the Ball Basket 17 and that the Rubber Band 18 is as close to the Worm Cover 13 as possible Any leaks will allow the vacuumed material to be blown out of the blower port and back into the surrounding environment See Figures A B and assy Diagram To use the vacuum insert the Hose 21 into the Vacuum Port If necessary y
Download Pdf Manuals
Related Search