Chauvet NV-F18 User's Manual
Contents
1. eplace bulb Only use the appropriately rated bulb as use of any other lamp may cause the unit to be non operational Finally before using check that the bulb is housed correctly Cleaning The most important part of your lighting effect to keep clean is the bulb as this allows the light output to transmit This should be cleaned with a soft damp cloth The body of the unit may also be cleaned in the same way We recommend internal cleaning be carried out by a fully qualified technician Troubleshooting If the unit is not functional check main power supply is on If the bulb does illuminate shipping may cause bulb to loosen Tighten bulb e If the unit is functional but lamp does not light lamp may require replacing If after trying this solution you still have a problem contact your dealer or CHAUVET Maintenance amp Servicing Work on internal parts should be carried out by a qualified technician Removal of any covers is considered a breach of warranty and will not be covered under any such agreement unless authorized first by the company Caution No user serviceable parts please refer to CHAUVET for service Power Connections The unit is supplied with a power plug appropriate to its voltage and destination Should any other connections be required they must be carried out with the following configuration Earth Green Yellow cable Neutral Blue cable Live Brown cable In the USA amp Europe it is req2. uired that all plugs are 3 pin type i e with Earth Ground connection In the UK it is required that all mains plugs are fitted with 5A fuses Technical Specifications Wei User Information Please complete for your records Date Purchased Serial No Dealer Stamp Model NV F18 18 BLACKLIGHT
3. yiti il 18 Blacklight NV F18 Users Guide Please read these instructions carefully before use World wide Headquarters 3000 North 29 Ct Hollywood Florida USA FL 33020 Tel 1 954 929 1115 Fax 1 954 929 5560 www ChauvetLighting com At the Rear Power Cable Housing Flourescent Blacklight Bulb On Off Switch Fig 1 Introduction Congratulations on the purchase of your new CHAUVET lighting effect We are confident you will enjoy many trouble free hours with this unit To assist with the care and use of the product we have prepared this short guide Operation This lighting effect has been designed to function on a mains power supply of either 120V 60Hz or 230V 50Hz and has been fitted with a suitable power plug for use with this voltage Check the label on the unit and the power plug for the correct voltage Before beginning operation refer to section on Installing Replacing Bulbs Connect to the mains power supply and switch on The unit should illuminate casting an ultra violet glow The duty cycle for this effect should be no more than 15 minutes on then 15 minutes off Installing Replacing Bulbs 1 Disconnect from main power supply before attempting to install replace_lamp 2 Ensure that the unit is sufficiently cool before removing blown lamps In order to install the lamp disconnect from main power supply first Gently twist flourescent bulb counterclockwise to remove fig 1 R
Download Pdf Manuals
Related Search