Casio 4726 MA0602-EA User's Manual
Contents
1. previously set alarm time 1 Pull the crown out to the second click e This will cause the hands of the alarm dial to move automatically to the current time setting 2 Push the crown back in to the normal position Using the Stopwatch Stopwatch minute hand Stopwatch 1 5 second hand The stopwatch lets you measure elapsed time up to 59 minutes 59 80 seconds To measure times with the stopwatch Elapsed Time Start Stop Re start Split Time i Start Split Split release E Timekeeping second hand moves in 2 second increments when power is low E For a watch with an elapsed time bezel Rotate the elapsed time bezel to align the mark with the minute hand After certain amount of time elapsed read the graduation on Ps the elapsed time bezel which the minute hand points to Elapsed time bezel The elapsed time is indicated e Some water resistant models are equipped with a screw lock crown e With such models you must unscrew the crown in the direction noted in the illustration to loosen it before you can pull it out Do not pull too forcibly on such crowns e Also note that such watches are not water resistant while their crowns are loosened Be sure to screw the crowns back in as far as they will go after making any setting2. MA0602 EA Operation Guide 4726 CASIO Hour hand Minute hand e To set the time e To adjust the positions First click of the alarm dial and Se d ae the stopwatch hands b B 1 Pull the crown out to the second click when the second hand is at 12 o clock position and the Second click second hand stops Setting time 2 Set the hands by rotating the Crewe crow ciate haa to Second hand iti move the hands clockwise Normal postion Move the minute hand four or Alarm hour hand five minutes past the time you want to set and then back it up to the proper setting e Carefully set the time making sure to distinguish between AM and PM Use to adjust the alarm dial hands to the current time e Each press of advances the alarm time by one minute e Holding down 8 advances the alarm time at high speed After adjusting the alarm dial hands hold down A for about two seconds e The stopwatch minute hand will perform one revolution automatically at this time When the stopwatch minute hand stops at 60 12 o clock advance to step 6 e If the stopwatch minute hand is not pointing at 60 12 o clock when it stops use to adjust its position so it does e Each press of advances the hand by one minute e Holding down advances the hand at high speed After adjusting the stopwatch minute hand hold down for about two seconds e The stopwatch 1 5 second hand will perform one revolution automatically at this time en the s
3. topwatch 1 5 second hand stops at 12 o clock advance to step 8 If the stopwatch 1 5 second hand is not pointing at 12 o clock when it stops use 8 to adjust its position so it does e Each press of 8 advances the hand by 1 5 second e Holding down advances the hand at high speed 8 Push the crown back in to the normal position To set the day 1 Pull the crown out to the first click 2 Set the day by rotating the crown away from you in the direction indicated by the arrow in the illustration 3 Push the crown back in to the normal position Avoid changing the date setting while the current time is between 9 00 p m and 1 00 a m Using the Alarm Alarm minutes hand Alarm hour hand is Alarm minutes hand When an alarm is turned on the alarm tone sounds for about 20 seconds when the alarm time is reached You can set an alarm time that is within 12 hours from the current time You can set only one Daily Alarm To set an alarm time 1 Pull the crown out to the first click 2 Use to set the alarm time you want Each press of 8 advances the alarm time by one minute Holding down advances the alarm time at high speed 3 Push the crown back in to the normal position To stop the alarm tone To stop the alarm tone after it starts to sound press any button After the alarm sounds the hands of the alarm dial will move to the current time position To cancel a
Download Pdf Manuals
Related Search