Canon EOS-1D C Instruction Manual for Macintosh
Contents
1. Trademarks Macintosh and Mac OS are trademarks of Apple Inc registered in the U S and other countries All other trademarks are the property of their respective owners Confirming File Information 282. f you checkmark Rename Files you can change the file name UVa MOV of the merged movie file when saving it To create file names with consecutive numbering enter the initial a value in the Initial Value for Consecutive Numbers box You can With this software if the above folder structure is not maintained it enter an initial value that is up to 5 digits Checkmark Remember Reference may not be possible to merge the split movie files properly When Consecutive Numbering to allow consecutive numbering to performing Merge all the split movie files in the folder and save as a continue even after closing the Merge Files dialog box and single file operation make sure the above folder structure is opening it again to merge and save movie files maintained and the DCIM folder at the upper layer of the folder structure is selected Even when the folder structure is maintained be aware that it may not be possible to merge the movie files properly if the name of the selected folder originally DCIM has been changed to another name If you checkmark Include Unsplit Clips movie files not split but saved in the folder selected in step 2 are copied to the folder for saving the merged file together nan ca 00 NO NO Merging Split Movie Files for a Single Movie Clip and Saving as a Single File 1 In the main window select the View menu gt Clip list gt The Clip list dialog box appears Note tha
3. Canon Macintosh Software for Playing Merging and Saving Movies EOS MOVIE Utility Ver 1 2 e TEDS Instruction Manual Content of this Instruction Manual Switching Between Pages EMU is used for EOS MOVIE Utility Click on arrows on the bottom right of the screen Camera model is displayed as an icon O next page Example EOS 1D C gt previous page e displays the relevant camera model return to a page you had previously P indicates the selection procedure of the displayed menu 3 l pera Click on the headings on the right side of the Example File menu Quit screen to switch to the contents page of that Square brackets are used to indicate items such heading Also click the item you want to read as menu names button names and window about on the table of contents to move to the names that appear on the computer screen relevant page Text inside lt gt indicates a key on the keyboard p indicates a reference page Click to move to the relevant page Q Marks information that should be read before use Marks additional information you may find helpful CANON INC 2014 CCS MO55EMUME 002 Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference oS TELE ELH TEE E READ CAREFULLY BEFORE USING CANON SOFTWARE LICENSE AGREEMENT IMPORTANT READ THIS AGREEMENT BEFORE USING THE
4. duplication or disclosure is subject to restrictions as set forth in either subparagraph c 1 ii of the Rights in Technical Data and Computer software clause at DFARs 252 227 7013 or subparagraph c 1 and 2 of the Commercial Computer Software Restricted Rights Clause at FAR 52 227 19 as applicable 7 SEVERABILITY In the event that any provision of this Agreement is declared or found to be illegal by any court or tribunal of competent jurisdiction such provision shall be null and void with respect to the jurisdiction of that court or tribunal and all the remaining provisions of this Agreement shall remain in full force and effect 8 CONTROLLING LAW The terms of this Agreement as it relates to purchases of the Software in the United States of America shall be governed and construed in all respects in accordance with the laws and regulations of the State of New York without reference to choice of law principles The terms of this Agreement as it relates to purchases of the Software in Canada shall be governed by the laws of the province of Ontario 9 OWNERSHIP All rights including but not limited to copyrights and trade secret rights to the SOFTWARE belong to Canon its affiliated corporations and third party licensors Your use of the SOFTWARE is subject to the United States Canada and other applicable copyright and trademark laws and nothing in this Agreement constitutes a waiver of the rights of Canon its affiliated corporations
5. g position is displayed Effective when only one number is Screen LuT 200 gt oo Vrne at mm a Yael aE selected e Select a number from the list and click the Delete button to delete the selected maker F SS e You can save the frames at all the marker positions on the list 5 J n W S n E a as still images p 19 s MAA Cae CP I a E a ue You can set a marker by clicking the a Add marker button Confirming File even during playback information gt The marker is set Playing Back Timecode 10 08 21 25 Duration 00 00 02 27 Playback Rate x 1 0 kt Up to 5 markers can be set Click the or button to select the next marker in the arrow direction and display the frame at that position If there is no other marker between the selected marker and the Start of the clip the first frame in the clip is selected and displayed If there is no other marker between the selected marker and the end of the clip the last frame in the clip is selected and displayed Click the a Marker list button to display the list of markers lt displays a numbered list of markers and time codes in order from the beginning of the clip Reference F The marker settings in the selected clip are saved automatically and the settings continue to be effective the next time you work with the clip in EMU O 08 PEE Playing a Specified Range You can play back
6. m gt JO r a a ifm mm alltel om a Duration 00 00 01 23 Playback Rate x 1 0 m i Hz Save multiple still images button gt Still images are saved following the settings in the Still Image Capture Settings dialog box All frames between the In and Out points are saved as still images You can also click this button during movie playback to save still images In this case playback is paused during capture F The In and Out point settings in the selected clip are saved automatically and the settings continue to be effective the next time you work with the clip in EMU Saving All the Frames where Markers are Set as Still Images Click the gt button g N OR j 00 m zm Timecode 10 08 21 25 Duration 00 00 02 27 Playback Rate x 1 0 o i Hez H 7 e X _ _ nn Ss A r A LUT 200 CA gt a EVIL Ne rior a L mL a el om a a gt All the frames specified with the markers are saved as still images using the settings made in the Still Image Capture Settings window F You can also save all the specified frames with markers in the procedures as below Click the Marker list button in the control area to display the marker list Click the Capture all images button in the marker list Introduction Contents Preparation Basic Screen Playing Back Confirming File
7. and third party licensors under such laws Nothing contained in Paragraph 1 shall be construed to give Canon any ownership rights in any images graphics or textual material that you save in connection with the Software 10 ACKNOWLEDGEMENT BY USING THE SOFTWARE YOU ACKNOWLEDGE THAT YOU HAVE READ THIS AGREEMENT UNDERSTOOD IT AND AGREE TO BE BOUND BY ITS TERMS AND CONDITIONS YOU ALSO AGREE THAT THIS AGREEMENT IS THE COMPLETE AND EXCLUSIVE STATEMENT OF AGREEMENT BETWEEN YOU AND CANON CONCERNING THE SUBJECT MATTER HEREOF AND SUPERSEDES ALL PROPOSALS OR PRIOR AGREEMENTS VERBAL OR WRITTEN AND ANY OTHER COMMUNICATIONS BETWEEN THE PARTIES RELATING TO THE SUBJECT MATTER HEREOF NO AMENDMENT TO THIS AGREEMENT SHALL BE EFFECTIVE UNLESS SIGNED BY A DULY AUTHORIZED OFFICER OF CANON Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference O 08 EE Introduction System Requirements Introduction EOS MOVIE Utility hereinafter EMU is software for playing merging Refer to the Canon Web site for information on the system and saving MOV format movies shot on the supported camera requirements i Contents Main Features of EMU ES Supported Movies With EMU you can smoothly play movie files shot on the supported J camera You can also use View Assist for playing movies shot on an Movie type Extension EOS 1D C with Canon Log gamma I
8. only a specified range of a selected clip 1 Follow steps 1 to 3 in Movie Clip Playback p 6 Drag the frame position slider left or right until the frame where you want to start playback appears then click the In point button Timecode 10 08 23 22 Duration 00 00 01 23 Playback Rate x 1 0 aI i BE LS A mm LUT 200 Ze mm wa o h r oeer a mm Lm a ae oe as In point button In point marker gt The In point marker is now displayed and the starting point for playback is set You can click this button even during movie playback to specify the In point Once you have specified the In point you can jump to the frame at the In point by clicking the move to IN point button If no In point has been set clicking this button jumps to the first frame You can click the move to IN point button even during movie playback 3 Drag the frame position slider left or right until the frame where you want to stop playback appears then click the Out point button g N Gh K A Timecode 10 08 24 08 Duration 00 00 01 23 Playback Rate x 1 0 aL i B a2 LUT 200 o r err a ob m e a e 0 Out point button Out point marker The Out point marker is now displayed and the ending point for playback is set You can click this button even during movie playback to specify
9. the Out point Once you have specified the Out point you can jump to the frame at the Out point by clicking the r move to OUT point button If no Out point has been set clicking this button jumps to the last frame You can click the 7 move to OUT point button even during movie playback The maximum range between In and Out points is one hour Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference o0 08 IEE 4 Click the Play IN OUT button Timecode 10 08 24 08 Duration 00 00 01 23 Playback Rate x 1 0 al i H paa Sa 7 127 HH l gt m o V e a gt gt I gt i Mel om aE The range of the clip between the IN point and the Out point is played back The In and Out points can be removed from Marker on the main screen menu Select Delete IN point Delete OUT point or Delete both IN point and OUT point as required When no In or Out point has been set the range played back is as follows e When no In point has been set the playback range extends from the first frame of the clip to the Out point e When no Out point has been set the playback range extends from the In point to the last frame of the clip e When no In point and no Out point have been set the playback range is the entire clip F The In and Out point settings in the selected clip
10. the first frame You can also click the move to IN point button during movie playback Drag the frame position slider left or right to display the ending frame and then click the Out point button 7 N Timecode 10 08 24 08 Duration 00 00 01 23 Playback Rate x 1 0 aL i H lt GI i 9 Eaa Ih 7 s Ela EH i E gt a o Yreene a jlo gt gt a ae gt a a a Out point marker Out point button gt The Out point marker is now displayed and the ending point for still images to save is set You can also click this button during movie playback to specify the Out point Once you have specified the Out point you can jump to the frame at the Out point by clicking the 7 move to OUT point button If no Out point has been set clicking this button jumps to the last frame You can also click the 7 move to OUT point button during movie playback The maximum range between In and Out points is one hour The In and Out points can be removed from Marker on the main screen menu Select Delete IN point Delete OUT point or Delete both IN point and OUT point as required Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference o oS G 5 Click the Save multiple still images button ri N i C K 7 h l a mm Gur 200
11. the save destination folder file system of output is located Check that the file system destination Do you specified for the save destination drive want to continue supports files of 4 GB or larger Reference Could not merge There is insufficient space on the drive because there was not where the save destination folder is enough available space located Create enough space or change the save destination and then repeat the merge process 25 Introduction Keyboard Controls Contents Key Space Play Stop Preparation Shift Space Play range between In and Out points Next frame Previous frame Basic Screen Shift Shift Shift T Shift 1 Jump to Out point for multiple still images Jump to In point for multiple still images Playing Back Select next marker between current position and start Select next marker between current position and end Confirming File Jump to first frame Heya Home End Jump to last frame Enable Disable look up table LUT Play Play range between In and Out points Shift L When pressed in playback state play again Reference Stop Adjust playback speed Switch display size a T OO PCa e 7 26 Uninstalling the Software Quit any applications before uninstalling the software Log into the account used when installation was performed When you have moved the folders
12. 00 mode you can use the guide area which represents the entire image to check the position of the image within the preview area Playing Back Confirming File Information Confirming the Movie File Information You can display and confirm shooting information for movie clips 1 WY Movie splitting flag Click the Clip list button in the control menu Compression format on the main screen RRN Shooting Date Time N Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 acl Image Size Frame Rate T Time Code Format A Audio Channel Sur zoo Pea 0 a y Yir Ie Prior a gt gt WD je gt a Lens Focal Length gt The Clip ist dialog box appears apnea Note that this function is available after you select a folder in onion rer na which the movie files to be confirmed are saved If no folder is oe selected follow steps 1 to 2 in Movie Clip Playback 0 6 to select a folder White Balance Mode Color Space In the Clip list dialog box select a movie clip to display its shooting information Click the i Shooting information button in the control menu on the main screen N Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 win H A LS A Out CI 200 i ioe EME mo I r err a jl gt gt m a ae gt a a The shooting information is displayed in the Shooting Info
13. Clip name MVI_0005 Nolumes EOS_DIGITAL DCIM 100E0S1 D MVI_0005 MOV Molumes EOS_DIGITAL DCIM 100EOS1 D MVI_0006 MOV Nolumes EOS_DIGITAL DCIM 100EOS1 D MVI_0007 MOV Close Movie file names are displayed in several lines for a movie clip made up of split movie files Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving es a OO Reference NO Merging Split Movie Files and Saving as a Single File You can merge multiple split movie files composing a movie clip and save them as a single file The original movie files are kept as they are in the folder they were originally saved Merging All the Split Movie Files in the Folder and Saving as a Single File 1 Click the Merge split files button in the main window Vi N OR i 00 g Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 lt i Hz J U dg oo 1 y j A EH LUT 200 a2 m I aer a gt o l ie fo t Merge split files button gt The Merge Files dialog box appears In the main window you can also select the Tools menu gt Merge split files to display the Merge Files dialog box Merge Files Folder for Files to be Merged Folder for Exported Files V Automatically Generate Subfolders File name _ Rename Files Initial Value for Consecutive Numbers Remember Consecutive Numbe
14. Error Messages The merge process has Check that there is a save destination been failed folder If the save destination folder is on an If an error message appears refer to the information below Message Cause and solution Cannot create a folder The memory card specified for the save at the selected destination is write protected Insert a destination writable memory card external storage device check that it is connected to the computer correctly Contents Preparation Please enter No consecutive numbering is entered consecutive numbers Enter an initial value for consecutive numbering when there are several movie clips with movie files to be merged Basic Screen The size of the file you The file system specified for the save are saving is not destination does not support the size of the supported on the file being saved Change the save destination file system destination Playing Back Confirming File Sufficient consecutive Consecutive numbering for file names numbers are not exceeds 99999 Change the value entered provided for the files for numbering or the file save destination Information EOS MOVIE Utility has Log into the user account in Macintosh in already started by other which EOS MOVIE Utility is running quit user EOS MOVIE Utility and start it up again Saving 4 GB or larger files may The merged movie file may not be saved to not be supported on the the drive where
15. Files and Saving as a Single File 21 Merging All the Split Movie Files in the Folder and Saving aS a Single File eee cceeeeeeeeceeeeeeeeeees 21 Merging Split Movie Files for a Single Movie Clip and Saving as a Single File 0000nn00nnnnn0annnnnaannnennnnnnnnannni 23 Quitting EMU 0 cececcceeeeeeeeeeeeeeeeeeeeeeeeeeneees 23 RETEFENCE ccccccecceecceeccceeeceecceeccaeeceeeceeeseueeaeeenaees 24 hy to Ne eee 24 D o ACERT E 20 Keyboard Controls cccccseecccescseeceeeeeeeeeeeseeeeeeseaes 26 Uninstalling the Software cccccccssecceesseeeeseeeeeeeees 2 About This Instruction Manual cccceeeeeeeeeeees 28 NAGS VS osde EER R EEES 28 Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference O og Ee TBE Installing the SoftWare ce lt Starting up EMU Click the shortcut in your desktop s Dock Introduction When installing this software an administrator level privilege is required Contents Double click the compressed EMU file gz format downloaded from the Canon Web site to open it Preparation Double click emum 1 2 0 0 9l dmg in the folder The disk image emum120 is mounted Double click the disk image emum120 and double click EMUInstaller in the displayed folder Basic Screen 4 Follow on screen instructions for installation
16. Information Saving anand oo 0c Reference Merging and Saving Movie Files o TEDS When you shoot movies with the supported camera the movie file will be split by 4 GB and multiple movie files will be created automatically even for a single shooting You can merge these multiple files and save them as a single file with this function Note that this function only supports movies shot with or 7D Mk II Checking the Movie Files in a Movie Clip In EMU the split movie files will be displayed as a single movie clip You can check the structure of a movie clip and see the movie files that consist the movie clip in the procedures as below 1 In the main window select the View menu gt Clip list gt The Clip list dialog box appears To use this function you must first select the folder in which the movie clips to check are saved If a folder is not selected follow steps 1 to 2 of Movie Clip Playback 0 6 to select a folder 2 In the Clip list dialog box select the movie clip whose structure you want to check then click while holding down the lt control gt key and select Show structure of the clip from the menu that appears Clip list Clip name MVI_0001 MVI_0002 MVI_0003 MVI_0004 MVI_0005 MVI_0008 MVI_0009 MVI_0010 Show structure of the clip y vierge split fles The Structure of Clip dialog box appears eoo Structure of Clip
17. NndoOW 0 ccccceeeececeeseeeeceeceeceesececeeseeeeseaeeetees 5 Playing Back a Movie Clip cccceeccceeeceeeseeeseeeeees 6 Movie Clip Playback ccccccceccccccseseeeesceeeeeeeeeeeeeeess 6 Playpack COM Obese reecccceacnscencecaceneesspasdecneozertegemeatovenecen 7 Adjusting V OLIN oet2ac2e2scuse2nce ccnmnteosissegenacaseceseecaenteonsopace 8 Changing the Playback Speed cssseeeeeseeeeeeeeees 8 Moving the Playback POSItion cccccsssecceeeseeeeeees 8 SCC aes ee 9 Playing a Specified RAnge ccccsssseeeeeeseeeeeeeeeeees 10 Playing Back Movies Shot with Canon Log Gamma set to OD eeaeee E E cesthten sinning e E a 11 Playing Back in Full SCree n cccccceseeceeeeeeeeeeeaees 12 Switching the Movie Display SiZ ccccceeeeeeeees 13 Confirming the Movie File Information 06 14 SAVING Still IMAGES esse eecseeeceeeeeteeeeeeeeeseeeeees 15 Still Image Capture Settings ccccccccseccceeeeeeeeeees 15 Still Image Saving Controls cccceecceseeeeeeseeeeeeeees 17 saving Individual Still Images ceeceeeeeeeeeeeeeeees 17 Saving Multiple Still IMAQG S ccc ceeceeeeeeeeeeeeeeees 18 saving All the Frames where Markers are Set as Still NAVA SS sero ce tee seo E traces E 19 Merging and Saving Movie Files ecceeeeees 20 Checking the Movie Files in a Movie Clip 20 Merging Split Movie
18. Playing Back Confirming File Information Saving i Reference F Starting up multiple EMU at the same time is not possible O 08 IPE Basic Screen Main Window You can view play back stop movie clips save still images or merge and save movie files in the main window Introduction Contents EOS MOVIE Utility File Edit View Marker Tools Windows Menu Menu to execute all functions Preparation EOS MOVIE Utility ere Basic Screen Playing Back Confirming File Preview area Information Displays a clip to be played back Timecode 10 08 21 28 Duration 00 00 02 27 Reference Control area Owr 200 For operations such as controlling o C UJE ll JL gt j I gt Me aE playback capturing still images merging and saving movie files 08 PEE Playing Back a Movie Clip The method for playing back a movie clip is described here lt is recommended that you first copy the folder where the movie clip is saved on the memory card to your computer with a card reader Movie Clip Playback 1 In the main window select the File menu gt Open gt A dialog box for selecting a folder appears 2 Select the folder where the movie clip to play is saved and then click the Open button Specify DCIM folder a se iy m Gocm Q FAVORITES z I 100E0Sxx E All My Files _ gt 08 Eosmisc Applications L Deskt
19. SOFTWARE ON THE CD ROM IN THIS BOX BY USING THE SOFTWARE YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT This is a license agreement the Agreement between you and Canon Inc Canon IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS AGREEMENT DO NOT USE THE SOFTWARE PROGRAM ON THE CD ROM AND THE USER MANUAL IN THIS BOX COLLECTIVELY THE SOFTWARE AND RETURN THE SOFTWARE WITHIN 30 DAYS FROM THE DATE OF PURCHASE TO YOUR POINT OF PURCHASE FOR A REFUND In consideration of the right to use the SOFTWARE you agree to abide by the terms and conditions of this Agreement 1 LICENSE Canon grants you the non exclusive right to use the SOFTWARE only on a single computer You may physically transfer the SOFTWARE from one computer to another provided that the SOFTWARE is used on only one computer at a time You shall not install or use the SOFTWARE on a network multiple CPU multiple site arrangement or any other hardware configuration where the SOFTWARE is accessible to more than one CPU or to more than one user YOU SHALL NOT ASSIGN SUBLICENSE RENT LEASE LOAN CONVEY OR OTHERWISE USE TRANSFER COPY TRANSLATE CONVERT TO ANOTHER PROGRAMMING LANGUAGE ALTER MODIFY DECOMPILE OR DISASSEMBLE THE SOFTWARE IN WHOLE OR IN PART EXCEPT AS EXPRESSLY PROVIDED IN THIS AGREEMENT 2 BACK UP COPY You may make one copy of the SOFTWARE solely for back up purposes or copy the SOFTWARE onto the permanent storage device e g a hard d
20. and the software to be deleted to the Trash select the Finder menu Empty Trash and empty the Trash You cannot reinstall the software until you have emptied the Trash 1 Display the folder in which the software is saved Open the Canon Utilities folder 2 Drag the folder for the software to be uninstalled to the Trash Select Finder menu on the desktop gt Empty Trash gt The software is deleted When uninstallation ends restart your computer Wy You cannot retrieve deleted data once you have emptied the Trash so be particularly careful when deleting data Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference oo Al os BUE Introduction About This Instruction Manual It is prohibited to reproduce in whole or part the contents of this Instruction Manual without permission Canon may change without notice the software specifications and contents of this Instruction Manual The software screens and displays printed in this Instruction Manual may differ slightly from the actual software The content of this Instruction Manual has been reviewed thoroughly However if you should notice any errors or omissions please contact a Canon Service Center Please note that irrespective of the above mentioned Canon does not take responsibility for the outcome of the operation of the software
21. are saved automatically and the settings continue to be effective the next time you work with the clip in EMU Playing Back Movies Shot with Canon Log Gamma set to On Goc Movies shot on an EOS 1D C with Canon Log gamma p 2 set to On will look dark and have low contrast by default If you apply a look up table LUT and view the clip you can check the clip with an image close to normal display 1 Checkmark the LUT checkbox Duration 00 00 01 23 Timecode 10 08 24 08 Playback Rate x 1 0 a i Hez Gt 4 a gf 200 EDE iA or AA LO WM aus dil gt gt lb Mel om WE LUT checkbox is not available if movies were shot with Canon Log gamma set to Off Play back the selected movie Perform the operations described in Movie Clip Playback p 6 gt The LUT is applied and the movie is played back F You can check or uncheck the LUT checkbox with the lt B gt key on the keyboard Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference o0 08 IME Playing Back in Full Screen Play back a movie Follow operations in Movie Clip Playback p 6 In the main window select the View menu gt Full Screen gt The movie played back is displayed in full screen You can also double click the preview area to display the movie in full screen To ca
22. ind of file under Image format is set to JPEG and Capture as is when re encoding is not necessary is checkmarked still images will be extracted from movies without modifications for the following movies Faster processing will be achieved e 4K movies shot with Canon Log gamma set to Off e 4K movies shot with Canon Log gamma set to On without applying an LUT To specify the destination click the button under Folder for Exported Files and choose the location in the Browse For Folder dialog box To save still images in a new subfolder checkmark Automatically generate a subfolder for each clip switch This option prevents files from being renamed if the destination folder already contains files with the same name Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference o0 08 PE On the File name tab complete the settings as necessary and click the OK button gt The settings are now complete Still Image Capture Settings General i Rename Files New file name CINE W Include still image capture count Still image capture count 00005 i Reset when selected as clip Image sequence settings Time code Initial Value for Consecutive Numbers Ex CINE_O0000_HHMMSSFF JPG SSS To name still image files or edit existing names checkmark Rename Files In New file name en
23. isk of your computer and retain the original for back up purposes Any other copying of the SOFTWARE is a violation of this Agreement You must reproduce and include the copyright notice on the back up copy 3 SUPPORT AND UPDATES Canon is not responsible for providing maintenance or support for use of the SOFTWARE No updates fixes or support will be made available for the SOFTWARE 4 LIMITED WARRANTY AND LIMITATION OF LIABILITY It is your responsibility to choose maintain and match the hardware and software components of your computer system Thus Canon does not guarantee uninterrupted service or correction of errors or that the functions or performance of the SOFTWARE will meet your requirements THE SOFTWARE IS LICENSED ON AN AS IS BASIS AND WITHOUT WARRANTY OF ANY KIND The CD ROM storing the SOFTWARE is warranted only against defective material under normal use for a period of ninety 90 days after purchase from an authorized Canon dealer as evidenced by your sales receipt Your sole remedy for a defective CD ROM shall be replacement of the same without charge when returned by you at your expense to your point of purchase and proven to be defective upon inspection The replacement CD ROM will be warranted for the remainder of the original ninety 90 day warranty period of the defective CD ROM The limited warranty does not apply if the failure of the CD ROM resulted from accident abuse or misapplication of the SOFTWARE and shall not exte
24. k when playback speed is You can change the movie playback speed Confirming File x0 5 or x0 4 Information Click the button while a movie is played Moving the Playback Position Current You can move the playback position with the frame position slider playback speed Playback speed adjustment button r N Timecode 10 08 20 14 Duration 00 00 02 2 Playback Rate x 1 0 al i BE Drag the frame position slider left or right while a clip is played or stopped 4 HH J pogon eE b m a ae gt a a eye Frame position slider Reference V NI Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 em i lt OE GH g A gt gt i i LUT D 200 e KO I raer a jf bm o aefa aE oe O 08 niot Introduction 86090 Marker list Setting Markers oe TEN 01 22 34 22 Markers can be used for tasks such as specifying the playback start 01 22 43 23 01 22 50 09 o Content position Up to 5 markers can be set ontents Drag the frame position slider left or right and click the a Add marker button at the position where m m you want to set a marker Preparation e Select a number from the list and click the Move button to j NI Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 i Bz Ae ee move the position of the selected marker and the frame at that Basic 7
25. ker Display the marker list Save the frames at all the marker positions as still images Jump to the frame at the Out point Jump to the frame at the In point Set the Out point ending point Set the In point starting point These buttons specify the In start and Out end points when specifying a playback range p 10 or saving multiple still images p 18 F To save still images with the LUT applied checkmark LUT checkbox Focal length shutter speed ISO speed white balance and GPS information in the shooting information appended to the image are values when the movie shooting started However the date and time when the still image was actually shot will be calculated and appended as shooting date and time Saving Individual Still Images 1 In the main window select the View menu gt Clip list gt The Clip list dialog box appears 2 Select a movie clip in the Clip list dialog box Drag the frame position slider left or right to display the frame to save Timecode 10 08 23 11 Duration 00 00 01 23 Playback Rate x 1 0 aP iS 7 m LuT 200 4 Eps EH oo Ur err a mL SL a l tel om aE Click the Save individual still image button r N oi j o Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 al i JN do 1 x r A HH Gur 200 o mm t ae gt a a Save individual
26. n addition you can Deena dioh consecutively play back multiple 4 GB movie files created from one MOV format movies shot on the supported camera clip shot successively merge them into a single file and save it Video snapshot albums are not supported EOS 1 D C and EOS 7D Mark II only Extracting still images is also Video files in MP4 format are not supported Screen What is Canon Log gamma Supported Camera This function allows rich gradation expression from dark points to bright points applying a wide dynamic range It maximizes the EOS 1D C EOS 1D X EOS 5D Mark III Playing back excellent capability of CMOS sensor FOS 6D EOS 7D Mark II EOS 70D What is a movie clip eee l MANE l Confirming File A movie recorded in a single shooting operation is called a movie Information clip Do not remove the memory card from the card reader during access Reference QQ Contents FT Introduction parse ccssep seen ot eecretesees atone ciattenattwneranpenteeneneecte 2 System REQUIFEMENHS ccccseeeeceeeeesseeeeeeeteneesanes 2 Supported MOVIES cccceccccseeeeeeeeeceeseeeeeseeeseeeeeseees 2 Supported CAMEL A cccccceceececeeeeeseeceeseeeeeeeeenneetanes 2 Installing the SOfWAIrEe ccccccccseeeceeeeeseeeeseeeseeeeees 4 Starting UD EMU ecceceeccceeeeeseeeeeeneeeeeeeeneeeetenes 4 BASIC SClEOM ecancceanaxsiacatissvaarneasnncesuaenedssldecdanescedscsissinnmea 5 Main WI
27. ncel full screen display press the lt Esc gt key or double click the mouse Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference MP 08 PEE Introduction Switching the Movie Display Size Enlarged position in guide area You can apply either Fit to window mode 100 mode or 200 mode as the method for displaying a movie in the preview area Select the View menu P Fit to window Change magnification Our vi 100 When you select Change magnification choose SS 100 or 200 in the magnification change list box a in the control area Screen Timecode 10 08 24 08 Duration 00 00 01 23 Playback Rate x 1 0 acl i H e 17 m jut AEA che e am Jarina il l hm l OD e o fell om aE gt The image is displayed in the preview area with the selected display mode In Fit to window mode the image is displayed completely within the preview area In 100 mode the image is enlarged to 100 actual pixel size and displayed in the preview area In 200 mode the image is enlarged to 200 and displayed in the preview area To change the display position of an image in 100 mode or 200 mode drag the image in the preview area f you remove the checkmark from the 100 or 200 checkbox in the magnification change list box the display will change to Fit to window mode In 100 or 2
28. nd to anyone other than the original user of the SOFTWARE EXCEPT AS SPECIFICALLY SET FORTH IN THIS PARAGRAPH 4 CANON CANON S SUBSIDIARIES DISTRIBUTORS AND DEALERS DISCLAIM ALL WARRANTIES EXPRESS OR IMPLIED INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE SOFTWARE NEITHER CANON NOR ANY OF CANON S SUBSIDIARIES DISTRIBUTORS OR DEALERS IS LIABLE FOR ANY DAMAGES HOWSOEVER CAUSED INCLUDING WITHOUT LIMITATION DIRECT CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE INCLUDING LOSS OF PROFITS EXPENSE OR INCONVENIENCE HOWSOEVER CAUSED OR ARISING OUT OF THE SOFTWARE OR THE USE THEREOF NEITHER CANON NOR ANY OF CANON S SUBSIDIARIES DISTRIBUTORS OR DEALERS SHALL HAVE ANY OBLIGATION TO INDEMNIFY YOU AGAINST ANY CLAIM OR SUIT BROUGHT BY A THIRD PARTY ALLEGING THAT THE SOFTWARE OR THE USE THEREOF INFRINGES ANY INTELLECTUAL PROPERTY OF SUCH THIRD PARTY 5 TERM This Agreement is effective upon your using the SOFTWARE and remains in effect until expiration of all copyright interests in the SOFTWARE unless earlier terminated You may terminate this Agreement by destroying the SOFTWARE This Agreement will also terminate without notice to you if you fail to comply with any of the terms of this Agreement and you must then promptly return the SOFTWARE In addition Canon may enforce its other legal rights 6 U S GOVERNMENT RESTRICTED RIGHTS NOTICE The SOFTWARE is provided with restricted rights Use
29. o be played back in the Clip list dialog box gt The image of the movie clip appears in the main window 4 In the main window click the gt button ano EOS MOVIE Utility Timecode 10 08 20 14 Duration 00 00 02 27 Playback Rate x 1 0 A i ie tut 200x O vlr Nel ver ar iC gt gt ai ae om 0E BH The movie clip is played For operations during playback see Playback Control on the right of this page and p 8 to p 13 Adjusting Volume to Switching the Movie Display Size Consecutive playback of multiple 4 GB movie files created from one clip shot successively is only supported for and 7D MkII Playback Control During playback buttons allow you to perform the following operations In point marker display only Out point marker display only Timecode 10 08 24 08 Duration 00 90 01 23 Playback Rate x 1 0 me Ez BE Pi 7 eA h os EH Qur O 200 gt a o Uen Ca mm aaea a Play Stop Next frame Previous Adjust playback speed frame Jump to the frame at the Out point Play a specified range Jump to the frame at the In point Set the Out point ending point Set the In point starting point These buttons specify the In start and Out end points when specifying a playback range p 10 or saving multiple still images p 18 F In the Clip list dialog box you can switch between movie clip
30. op GI XXXXXXX bi Documents DEVICES L XXXXXXX Toc oilen EVO m aa C BOOTCAMP i o emuminA a Cancel f Open The Clip list dialog box appears After inserting the memory card in the card reader you can also connect the reader to the computer to select folders on the memory card directly You cannot connect the camera to the computer to directly select folders on the camera s memory card Movie files shot on a camera are recorded on the memory card with the folder structure shown below DCIM 100EOSxx MVI_xxxx MOV or 100CANON MVI_xxxx MOV MVI_xxxx MOV MVI_xxxx MOV 101EOSxx MVI_xxxx MOV or 101CANON MVI_xxxx MOV MVI_xxxx MOV MVI_xxxx MOV 102EOSxx MVI_xxxx MOV or 102CANON z MVI_xxxx MOV MVI_xxxx MOV MVI_xxxx MOV With this software if the above folder structure is not maintained it may not be possible to play back the movie clips properly When playing back movie clips make sure the above folder structure is maintained and the DCIM folder at the upper layer of the folder structure is selected Even when the folder structure is maintained be aware that it may not be possible to play back the clips properly if the name of the selected folder originally DCIM has been changed to another name Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference 08 APE Select the movie clip t
31. ring Saved Files Include Unsplit Clips Click the button for Folder for Files to be Merged and then select the folder in which the movie files to be merged are saved Merge Files Folder for Files to be Merged All the movie files saved in the selected folder will be merged Folder for Exported Files Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference 2 08 Up Introduction D Movie files shot on a camera are recorded on the memory card with Click the button for Folder for Exported Files mate the folder structure shown below and then select the folder for saving the merged movie file Contents DOCANGN Folder for Files to be Merged 7 p Preparation Folder for Exported Files M Automatically Generate Subfolders A Click the Start button ES Screen 101EOSxx Remember Consecutive Numbering 101 CANON Saved Files Include Unsplit Clips Playing Back gt Merging and saving starts Confirming File A message appears when merging and saving are complete Information 102EOSxx F f you checkmark Automatically Generate Subfolders a 102CANON subfolder is created in the folder for the merged movie file selected in step 3 then the merged movie file is saved there A file can be saved without changing its file name even if another file with the same file name is already in the folder
32. rmation window Shooting Information Present MPEG 4 AVC H 264 Low compression intra frame ALL Canon EOS XXX XXXXXXXXXXXX XXXX KX KX X XX XX 1920x1080 59 94 Non drop frame 2 ch 48 kHz LPCM EF16 35mm f 2 8L USM 35 0 mm Manual 1 60 5 6 Center Weighted Average Metering 400 On 0 0 Introduction Contents Preparation Basic Screen Playing Back ES Confirming File Information Reference 08 EEE a N Saving Still Images Still images can be extracted and saved from the current movie clip Still Image Capture Settings First complete the settings for how still images are saved from movies 1 In the main window select the EOS MOVIE Utility menu P Still Image Capture Settings gt The Still Image Capture Settings dialog box appears 2 On the General tab complete the settings as necessary Still Image Capture Settings Filename Image format Kind of file JPEG Image quality L 10 v Capture as is when re encoding is not necessary Falder for Exported Files V Automatically generate a subfolder for each clip switch Cancel OK Under Kind of file select the desired file format Select TIFF to save images as uncompressed 8 bit RGB TIFFs By default JPEG saves images at the highest setting in Image quality When the file format specified in K
33. s with the lt T gt lt 1 gt keys on the keyboard or by clicking the mouse You can also double click a movie clip name in the Clip list dialog box to play back a movie clip Even if you close the Clip list dialog box the content of the list is saved If you click the Clip list button in the control area or select Clip list from the View menu the Clip list reappears Introduction Contents Preparation Basic Screen Confirming File Information Playing Back Reference QO 08 EE Introduction Each time you click the gt _ changes as follows Movie clip frame Playback Frame rate after changing rate speed playback speed 59 94p x1 0 59 94p x0 5 x0 4 button the playback speed Adjusting Volume You can adjust volume during playback with the volume slider Contents Drag the volume slider left or right Duration 00 00 02 27 Playback Rate x 1 0 r N Timecode 10 08 20 14 acl i B amp eam ae 29 97 Preparation 4 H 4 p JwT O 200 EDE fe Q Vf larr a l I gt I gt a ae a a I Basic Volume slider Mute button 23 98p 50 x1 0 x0 5 a Screen To temporarily turn audio off click the mute button Other than above x1 0 Movie frame rate You cannot click the playback speed adjustment button Playing Back Changing the Playback Speed F Audio is not played during slow playbac
34. still image button A still image is saved following the settings in the Still Image Capture Settings dialog box You can also click this button during movie playback to save still images In this case playback is paused as the current frame is saved as a still image Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference o0 08 Up Saving Multiple Still Images By specifying a segment in the current movie clip you can save all frames within the segment as still images 1 2 In the main window select the View menu gt Clip list gt The Clip list dialog box appears Select a movie clip in the Clip list dialog box Drag the frame position slider left or right to display the starting frame and then click the In point button when a frame from which you want to start saving appears Timecode 10 08 23 22 Duration 00 00 01 23 Playback Rate x 1 0 wu eS GS j lib Mel om t gt In point marker In point button The In point marker is now displayed and the starting point for still images to save is set You can also click this button during movie playback to specify the In point Once you have specified the In point you can jump to the frame at the In point by clicking the move to IN point button If no In point has been set clicking this button jumps to
35. t this function is available after you select a folder in which the movie files to be merged are saved If no folder is selected follow steps 1 to 2 of Movie Clip Playback 0 6 to select a folder 2 In the Clip list dialog box select the movie clip to be merged then click while holding down the lt control gt key and select Merge split files from the menu that appears The Merge Files dialog box appears Click the button for Folder for Exported Files and then select the folder for saving the merged movie file 4 Click the Start button gt Merging and saving starts A message appears when merging and saving are complete Quitting EMU In the main window select the EOS MOVIE Utility menu gt Quit EOS MOVIE Utility gt EMU quits Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Saving Reference QO 23 Reference Troubleshooting lf EMU is not operating correctly refer to the information below EMU does not work Even if your computer has the RAM capacity memory that meets the system requirements if other applications are running at the same time as EMU you may not have sufficient RAM memory Quit applications other than EMU Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference oo A os BUE Introduction
36. ter a name or change the existing name File names can be up to 30 characters Note that still image files cannot be renamed unless this option is checkmarked In such a case the file name will be the same with the original movie clip To append a serial number to file names that indicates the number of times still images have been captured from a movie clip checkmark Include still image capture count In Still image capture count enter the first serial number in the range 0 99999 To reset the serial number in Still image capture count when you select another movie clip checkmark Reset when selected as clip To append the time code to the end of file names select Time code under Image sequence settings To append a serial number select Initial Value for Consecutive Numbers Introduction Contents Preparation Basic Screen Playing Back Confirming File Information Reference o0 o LG Still Image Saving Controls When you save still images you can perform the following operation with buttons In point marker display only Out point marker display only Save a still image Save multiple Marker display only still images Timecode 10 08 24 08 Duration 00 00 01 23 ayback Rate x 1 0 aC i 2 sM E lt e E 10 a a N J l j Ye bisi 27 dll fi b I gt jt li gt a de k LL i Set the marker Move the mar
Download Pdf Manuals
Related Search