Canon DR40-C-VB User's Manual
Contents
1. INC CANON INC 2011 Using the Indoor Dome Housing When using the indoor dome housing it is recommended you use with the VB M40B black model to reduce the camera s visibility and reflection Important e The angle of view is slightly wider when using the dome housing e Grime on the dome may reduce image quality Periodic cleaning is recommended Use a soft cloth moistened with water or diluted neutral detergent to wipe away grime then wipe dry Symbols Indicating Safety Precautions This Installation Guide uses the following marks to indicate the important information the user should know in order to use the product safely Be sure to observe these items Printed in Taiwan Inappropriate handling against the instruction accompanied by this sign may result in death or serious injury Be sure to observe these warnings to ensure safety A Warning Inappropriate handling against the instruction accompanied by this sign may result in injury Be sure to observe these precautions to ensure safety A Caution Inappropriate handling against the instruction accompanied by this sign may result in property damage Be sure to observe these precautions Caution This symbol indicates important or restricted items Be sure to read this document Important Contains reference information for operation or additional explanations B Note Safety Precautions This section explains precautions that must be ob2. YT1 1602 000 YT11602000 For use with Network Camera VB M40 Indoor Dome Housing DR40 C VB DR40 S VB Installation Guide ENGLISH The indoor dome housing DR40 C VB DR40 S VB is an optional product for exclusive use with VB M40 The dome is embedded into the ceiling for a clean appearance This Installation Guide describes the installation procedure using indoor dome housing DR40 C VB DR40 S VB Be sure to read the Safety Precautions section for correct use After reading this Installation Guide keep it in a readily accessible location for future reference In addition to this Installation Guide also read the bundled VB M40 Installation Guide and VB M40 Operation Guide included in the Setup CD ROM For the latest information firmware and bundled software instruction manuals operating environment etc please check our website Caution Request a professional installer for all camera installation work Never try to install by yourself Doing so may result in unforeseen accidents such as dropping the camera or electric shock Check Bundled Items This product comes with the following items If any item is missing contact the dealer where you purchased the product 1 Ceiling bracket 1 2 Backside ceiling bracket 2 3 Dome 1 4 Dust cover 1 5 Safety wire 1 6 Template 1 8 Ceiling bracket screws M4 3 10 Installation Guide this document 1 7 Fixing screws M3 7 9 Dome fixing screw M2 1 CANON
3. enzenes when cleaning the camera Installing in such places may cause fire or electric shock Notes on Power Supply Warning e Only use the dedicated AC adapter PA V17 optional for AC power e Do not set any heavy objects on the power cable e Do not pull forcibly bend scratch or modify the power cable e Do not cover or wrap the AC adapter optional with cloth or blankets Fire or electric shock may result Be sure to read the instruction manual for the PA V17 optional before use Caution e Never touch the camera head during initialization Initialization failure or malfunction may result e After turning off the power wait for at least five seconds before turning the power on again If the power is turned on again too quickly the camera may not operate well Bundled screw M3 x 4 gt Bundled screw M3 x3 Bundled Lt t screw M4 x3 OL LID wp a ae LLL Safety Wire 2 ng LAN cable structure 7 Backside o onal ceiling a s E bracket Dome a Camera au Ceiling board External Dimensions DR40 C VB DR40 S VB Backside ceiling bracket 204 0 mm 8 03 in 164 0 mm 6 46 in Height 10 0 mm 0 39 in 7 0 mm 0 28 in I 84 0 mm 3 31 in 92 0 m
4. era cannot be installed on vertical surfaces such as walls e Be sure to attach the safety wire when installing the camera e Use exclusively with VB M40 Failure to do so may result in the camera falling or other accidents e Do not touch the edge of the metal parts with bare hands e Do not insert your finger in the space between the brackets and the ceiling Injury may result Caution e Do not carry the network camera by the camera head e Do not turn the camera rotator by hand e Do not install the camera on an unstable or inclined surface Malfunction may result e Take care not to damage wiring or pipes in the room Damage to peripheral items may result Cautions on Use Warning e f you discover defective conditions such as smoke strange sounds heat or strange odors immediately stop using the camera and contact your nearest dealer Continued use may cause fire or electric shock e Do not disassemble or modify the camera e Do not damage the connecting cord e Do not spill water or other liquid inside the camera spray the camera with water or otherwise make it wet e Do not insert foreign objects into the camera e Do not use flammable sprays near the camera e Do not leave LAN cables external power supplies or AC adapter optional power connectors connected when the camera is not in use for long periods e Do not use flammable solvents such as alcohol paint thinner or b
5. g holes drilled in step 1 5 Temporarily tighten screws to the backside ceiling bracket Temporarily tighten the three bundled ceiling bracket screws M4 through the ceiling 6 Secure the safety wire Securely attach the safety wire to an anchor or structure After securing the end of the safety wire to the ceiling secure the other end to the camera using the screw that is fastened to the camera Connect the LAN cable to the camera through the wiring hole If an AC adapter PA V17 optional or external power supply is used connect the power connector to the camera Connect cables to external device I O terminals and audio input output terminals as necessary see Connecting the Camera in VB M40 Installation Guide Mount the ceiling bracket on the ceiling Position the ceiling bracket over the screws temporarily tightened in step 5 turn clockwise to temporarily secure in place and completely fasten the screws 9 Attach the dome Align the O mark on the dome with the 1 mark on the ceiling bracket and turn clockwise until the 1 mark on the dome aligns with the 1 mark on the ceiling bracket This procedure also aligns the ceiling bracket screw hole with the dome fixing screw hole Affix the dome To prevent the dome from rotating attach one dome fixing screw M2 11 Reboot the camera when the installation is complete The camera position is initiated see Maintenance in Chapter 4 Setting Pa
6. ge of the VB M40 Operation Guide B Note While the LED is on light may reflect inside the dome and be captured on video If this happens set the LED setting to Off see LED Setting in VB M40 Operation Guide Main Specifications Model DR40 C VB DR40 S VB Type Clear type smoked type Network camera mounting environments Temperature 10 to 50 C 14 to 122 F humidity 5 to 85 RH non condensing Dimensions x H 204 112 Dome x 92 mm 8 03 4 41 Dome x 3 62 in Including ceiling embedded section 176 mm 6 93 in H Weight Approx 765 g 1 687 Ib excluding camera Smoked DR40 S VB This dome is approximately 50 transparent Minimum subject illumination Day Mode color 0 8 lux F1 6 Shutter Speed 1 30 sec when Smart Shade Control is off 0 2 lux F1 6 Shutter Speed 1 8 sec when Smart Shade Control is off 0 06 lux F 1 6 Shutter Speed 1 8 sec when Smart Shade Control is on 0 02 lux F 1 6 Shutter Speed 1 30 sec when Smart Shade Control is off 0 004 lux F 1 6 Shutter Speed 1 8 sec when Smart Shade Control is off 0 002 lux F 1 6 Shutter Speed 1 8 sec when Smart Shade Control is on Night Mode monochrome
7. m 3 62 in 112 0 mm 4 41 in Installing the Camera The procedures for mounting the camera to the ceiling using the indoor dome housing are described below Before installing the camera set the IP address and other network information on the camera using the VB Initial Setting Tool For details on how to operate the VB Initial Setting Tool see VB M40 Operation Guide If using an SD memory card insert the SD memory card into the camera before installing see Using an SD Memory Card in VB M40 Installation Guide Important Once the camera is installed to the ceiling to insert and remove the SD memory card the camera must be removed from the ceiling and the ceiling bracket dismounted Determine an installation position for the camera and drill holes in the ceiling Using the bundled template line up the directon of the camera determine the locations of the backside ceiling bracket mounting holes three and the ceiling bracket holes then drill the holes into the ceiling Important When mounting the indoor dome housing be sure no shavings enter the dome 2 Mount the camera to the ceiling bracket Affix with four bundled fixing screw M3 3 Mount the dust cover to the ceiling bracket Affix with three bundled fixing screw M3 4 attach the backside ceiling brackets inside the ceiling From the inside of the ceiling insert the protrusions on the backside ceiling brackets through the mountin
8. served when using the camera If they are not observed injury death and or property damage may occur Read the following information carefully and be sure to observe the precautions Installation Precautions Warning Do not install in the following places e Places receiving strong direct sunlight near heat generating objects or places subject to high temperatures e Places near fire sources or flammable solvents alcohol thinner etc e Humid or dusty places e Places subject to lamp black or steam e Places subject to sea air e Confined or enclosed places Installing in such places may cause fire or electric shock Caution For installation or inspection of this camera consult or request the dealer where you purchased the product e Wire the power supply network and other cables safely and securely according to the relevant regulations such as technical standards for electrical installations e When installing on a ceiling make sure the surface is capable of withstanding the total weight of the camera and indoor dome housing and is sufficiently reinforced if necessary e Periodically check the ceiling brackets and fixing screws for rust and loose material to prevent injuries and equipment damage due to falling items e Do not install in unstable places places subject to significant vibration or impact or places subject to salt damage or corrosive gas as this may result in malfunction e The cam
Download Pdf Manuals
Related Search