Home
Cambridge SoundWorks PD200 V2 User's Manual
Contents
1. Operating hours Singapore Time Mon Fri 9 00 A M 6 00 PM Sat Sun amp Public Holidays closed To reach Technical Support via the Internet visit our web site at http www creative asia com support 2002 Cambridge SoundWorks Inc All rights reserved Cambridge SoundWorks is a registered trademark of Cambridge SoundWorks Inc Newton Massachusetts USA All other brands and products are trademarks or registered trademarks of their respective holders All specifications are subject to change without prior notice Actual contents may differ from those pictured Gee wD SOUNDWORKS 311 Needham Street Newton MA 02464 A CREATIVE Company PlayDock PD200 v2 for Creative NOMAD Digital Audio Player Jukebox Signal Miniplug J DC output Introduction Thank you for purchasing the Cambridge SoundWorks PlayDock PD200 The PlayDock PD200 is designed for use specifically with Creative s NOMAD Jukebox players and we provide two flexible hold ers called Gloves for these products The Signal miniplug of the PlayDock PD200 can also be connected to the headphone minijack of a typical portable audio device However the Gloves are not designed to accommodate any device other than a Creative NOMAD Jukebox Contents A PlayDock PD200 v2 player with battery inside B Power Supply Adapter C Jukebox 3 Glove D 5V Voltage Plug for Jukebox 3 player E Original Jukebox Glove F 9V voltage plug for both 9V
2. Repeat for the other connector 5 Replace the endcap and charge the battery for at least 12 hours prior to portable operation Left endcap Warranty To the original purchaser Cambridge SoundWorks Inc will warrant the speaker system to be free of defec ship for a period o s in material and worksman one 1 year from date of pur chase With respect to defects Cambridge SoundWorks will at its option replace the product or repair the defec to the original purc in the product with no charge haser for parts or labor This warranty does not extend to abuse accident faulty hookup defective associated equipment or use of the speaker with equipment for which it was not intended This warranty is valid only when the speaker is retu rned to the retailer where the PlayDock PD200 was purchased This is the sole and expressed warranty This warranty is in lieu of all other warranties expressed or implied of mer chantability fitness for purpose or otherwise In no event shall Cambri dge SoundWorks be liable for incidental or consequential damages or have any liability with respect to defects other than the obligations set forth above To ensure warranty coverage it is incumbent upon the original pur chaser to contact t he retailer where the PlayDock PD200 was purchased and inform them of the defect within the w arranty period The only acceptable method of esta
3. and 12V original Jukebox players P81 1710 Bottom lip Bottom lip First Use 1 Connect the proper Voltage Plug All original Nomad Jukebox models 12V or 9V use the 9V Voltage Plug Nomad Jukebox 3 models use the 5V Voltage Plug Align the Voltage Plug mark ing with the PlayDock s DC Output gray dot then insert the Plug until it snaps into place see G To remove a Voltage Plug press the small catch on the opposite side of the Plug then pull apart see 2 Insert Adapter AC plug into AC outlet see I 3 Insert Adapter output plug into the PlayDock 12 14 VDC input on the right endcap next to the POWER button see J PlayDock s internal battery will now charge We recommend you charge the PlayDock PD200 for 12 hours before using it without the AC adapter portable operation J 12 14 DG IN POWER Preparing the Jukebox 4 Identify the correct Glove for your Jukebox see illustrations on the first page 5 Attach the Glove to the PlayDock as follows Locate the Stage and Bar on the PlayDock see K Slip the Glove lip underneath the PlayDock s Stage Press the Glove s claws onto the PlayDock bar see L 6 Insert your Jukebox into the Glove by spreading apart the sides of the Glove see M 7 Connect the Signal and Power as follows see N on facing page Route both wires through the cable restraint Ins
4. Battery Service Life Recharge the PlayDock overnight whenever possible even when the PlayDock has been used in portable operation only for a few hours If storage is necessary ensure the PlayDock battery is fully charged with the POWER switch in the out position Recharge the battery at six month intervals Remove screws on side for battery access The PD200 automatically shuts down to protect a low charge battery If the PD200 does not activate in portable operation do not attempt to defeat this protection feature by repeated activation cycles Recharge the PlayDock PD200 battery as soon as possible preferably within 24 hours Attempting to operate the PD200 after low battery shutdown may permanently reduce the service life of the battery Battery Replacement Assuming it is kept charged the battery inside the PlayDock PD200 should last for many years When the battery fails to operate the PlayDock for more than two hours after a 12 hour charge cycle replacement is indicated Contact Cambridge SoundWorks for a replacement 1 To replace the battery remove the three screws on the left hand endcap the endcap without the POWER switch 2 Note the red wire s connector is attached to the battery s red positive terminal Detach both connectors from the battery ter minals and slide out the battery 3 Install a new battery inside the PlayDock PD200 player 4 Attach the red wire s connector to the red battery terminal
5. blishing warranty sta tus is a copy of the original proof of purchase indicating customeris name and purchase date For Service and Support Inside U S A if purchased from a Cambridge SoundWorks retail out let Cambridge SoundWorks phone sales Cambridge SoundWorks www hifi com website If a speaker malfunctions due to a manufacturing defect within the warranty period just call us toll free at 1 800 FOR HIFI between 9 a m and 10 p m ET Monday through Friday 9 a m and 9 p m ET Saturday and Sunday and ask for a return authoriza tion number We will repair or replace your speaker at no charge to you Proof of purchase is required After 45 days you must pay for shipping back to us we will then pay the shipping costs to return it to you In Asia Creative Technology Ltd Technical Support 31 International Business Park Creative Resource Singapore 609921 Tel 65 895 4100 Fax 65 569 6640 For Service and Support if purchased from other retail outlets inside U S A Canada and Latin America Creative Labs Inc Technical Support 1523 Cimarron Plaza Stillwater OK 74075 Tel 405 742 6622 Fax 405 742 6633 Operating hours Central Time Daily 8 00 A M 10 P M To reach Technical Support via the Internet visit our website at att www creativehelp com You can reach Customer Service by phone at 1 800 998 1000 Mon Fri 8 00A M 7 00 P M Central Time You can also use our Faxback service at 405 372 5227
6. ert the DC Plug into the Jukebox s DC IN jack Insert the Signal Miniplug into a Line Out jack on the Jukebox 8 Tuck the junction of the Power cable behind the cable restraint see O on facing page G Connecting the voltage plug So Then press Glove claws onto PlayDock bar bee PlayDock s DC output Voltage plug M First spread apart sides of Glove H Removing the voltage plug Then Slip Jukebox into Glove Jukebox DC IN jack location varies with model Voltage plug Jukebox LINE Out location varies with model PlayDock Signal Miniplug Normal Operation Power Supply Adapter connected 8 Make sure the POWER button is pressed in on the right side endcap The MUTE light will glow green 9 With the Jukebox playing adjust VOLUME W or VOLUME A 10 Use the WIDE mode for enhanced sound 11 Press MUTE to silence the speaker the light glows red Press MUTE again to restore output 12 We recommend you use the MUTE button to silence the speaker whenever the AC power adapter is active Mute PlayDock Controls Activate portable operation Wide Mode Power cable junction Portable Operation without Power Supply Adapter 13 Make sure the POWER switch is in then press the MUTE switch to activate portable operation The light will glow green The PD200 automatically turns off after about five minutes of inactivity to pre serve the batt
7. ery In this case press the Mute switch to reactivate 14 Leave the POWER switch in its out position whenever the PlayDock is not needed and AC power is not available This eliminates power draw on the battery 15 Connecting the Power Supply Adapter without AC power available prevents proper portable operation Disconnect the AC power adapter if Power Supply Adapter is not available After a 12 hour charge the PlayDock PD200 will operate from its internal battery for about 10 12 hours of continuous play at moderate volume When the battery charge is low the sound distorts at higher volume levels Volume Down Volume Up Charging Keep the Power Supply Adapter connected to the PlayDock PD200 whenever portable operation is not needed and AC power is available This will keep both the Jukebox battery and PD200 battery at optimum charge level The PlayDock PD200 sealed battery lead acid type cannot be overcharged The PD200 battery will charge anytime an active AC power adapter is connected The POWER switch must be pressed in to charge the battery in a Jukebox connected to the PD200 s DC power output
Download Pdf Manuals
Related Search
Related Contents
Acronis True Image Home 2010 Hybrid 10KW PV Inverter User Manual Samsung BX2350 Haier Microwave HMV1632SBSS Service Manual V7 CK0G1 Typhoon™ FLA 7000 29 07 22 02 MicroLux m.D BIC C30 User's Manual Copyright © All rights reserved.
Failed to retrieve file