Cables Unlimited SPK-SHOWER User's Manual
Contents
1. N Ratio 70dB Operating Distance Up to 150 feet Package includes Wireless shower speaker x 1 Audio transmitter x 1 AC DC power adapters x 2 6 3mm to 3 5mm stereo adapter x 1 User manual x 1 ATTENTION The transmitter for this speaker set is designed to work with a wide variety of devices Our tests have shown the default volume levels of iPods MP3 players and other devices connected to the transmitter through the headphone jack does not have the signal strength required by the transmitter Raising the volume of your device will increase the signal strength to the transmitter The blue signal LED will light when the required signal strength from your device is reached We recommend that you keep the volume set on your iPod or MP3 player at a minimum of 3 4 of full volume2. it to prevent sliding down You can also connect the 3 5mm audio cable to the other end to the output jack of any of your desired audio sources like MP3 CD DVD TV Radio recorder etc When an audio signal reaches the transmitter the Blue indicator illuminates steady If the Blue indicator keeps flashing ensure the audio source is switched on Speaker Battery Operation 1 To operate the speaker using battery power open the battery compartment cover located at the rear of the speaker Insert six AA size batteries purchase separately into the battery compartment observing proper polarities as indicated Replace the battery compartment cover AC Operation 1 To operate the speaker using AC power plug the 9V power adapter into a standard wall outlet To insert the power adapter connector plugs firmly into the DC IN jacks located underneath the speaker Speaker Operation 1 To switch on the speaker press the POWER button located on the front panel of the speaker A blue power LED on the speaker illuminates To listen to a desired audio source through the speaker switch on the audio device that the transmitter base is connected to The blue LED on the transmitter illuminates steady Depending on location select CHANNEL 1 or 2 on the transmitter base for optimal performance To locate the strongest operating frequency press the AUTO TUNE button located on the front speaker panel When the Auto Tune function is engag
3. AUDIO UNLIMITED SPK SHOWER showerPOD 900MHz Wireless Shower Speaker On USER MANUAL www audio unlimited com www cablesunlimited com Introduction amp General Instructions Overview This Audio Unlimited showerPOD 900MHz wireless shower speaker system utilizes the latest advances in wireless transmission technology to deliver dynamic high quality audio from virtually any audio video device indoors up to 150 feet away Simply connect the transmitter to a desired audio source i Pod MP3 CD DVD Hi Fi system or radio to enjoy wireless full spectrum sound without complicated wiring and installation while having a shower Features Waterproof speaker High Quality interference free sound 900MHz Digital Hybrid RF technology speaker system RF technology allows full freedom of movement Operating distance up to 150 feet RF transmission travels freely through walls floors and other solid objects Auto On Off Control Auto Tuning function Warning To avoid electric shock do not handle the transmitter base or AC adapter with wet hands Do not attempt to repair or modify this unit Do not use attachments not recommended by the manufacturer Do not drop shock or apply pressure to the unit This may cause permanent damage Battery Precautions Only use specified AA batteries or equivalent replacements with this unit Batteries may leak or explode if recharged inserted improperly disposed of in fire or mixed with dif
4. eaker sound level press the buttons located on the front panel of speaker until the desired volume is reached This device must be used with the AC DC adapter supplied in the package Troubleshooting No Sound Ensure the AC adapter is securely plugged into the wall outlet and the transmitter DC IN jack Ensure the speaker POWER button is in the ON position Speaker batteries may be too weak Replace with new batteries or connect with the AC DC adapter Included Ensure the connected audio device is switched on and producing a signal Ensure that the volume level is set to a moderate level Distortion Ensure the speaker and transmitter are operating on the same frequency If not press the AUTO TUNE button until both units are operating on the same frequency Switch the CHANNEL selector position 1 or 2 on the transmitter base and press the AUTO TUNE button the speaker until the matching frequency is reached Speaker batteries may be too weak Replace with new batteries or connect with the AC DC adapter not supplied Ensure that the volume level is set to a moderate level The audio signal input level is too low Increase the volume level of the audio source Specifications Transmission Mode UHF mono Carrier Frequency 900MHz Digital Hybrid Operation Voltage Transmitter DC 12V 200mA adapter Speaker 6 x AA batteries not supplied or DC 9V 500mA adapter included Frequency Response 40Hz 12KHz Distortion 1 S
5. ed frequency scanning begins automatically and stops when a signal is detected You should experience interference free speaker reception during normal room to room operation If interference or poor signal reception occurs press the AUTO TUNE button located on the speaker once the blue LED indicator illuminates to locate the strongest operating frequency If peak reception remains elusive switch the CHANNEL setting 1 or 2 on the transmitter base then press the AUTO TUNE button on the speaker to locate the corresponding frequency The BASS BOOST button can be used to enhance the bass sound depending on your music preferences Turn bass boost effect ON simply by pressing the button down on the speaker and pressing it once again to turn it OFF To suit the needs of different users you can mount the speaker inside your bathroom Speaker Operation Note When transmitting over long distances the audio signal becomes weaker and interference increases If the source signal is too weak for reception the transmitter automatically switches off blue indicator will flash after approximately four minutes to protect the unit and save power If the source signal returns to an adequate level the transmitter automatically switches back on Power Off To switch off power press the ON OFF button on the front panel of the speaker And then slide power switch to OFF position at rear transmitter Volume Control To adjust sp
6. ferent types When installing batteries observe proper polarities Batteries positioned incorrectly may leak and cause damage to the unit Never attempt to recharge conventional dry cell batteries Replace only with fresh new batteries If unit will not be used for a long period of time remove batteries to prevent damage or injury due to possible battery leakage Keep all batteries away from children Parts Identification Transmitter DC IN Jack Channel Selector Power ON OFF 3 5mm Audio Cable Receiver Volume Bass Volume Power Tune Down Boost Up Switch Adapter 3 5 6 3mm Jack Plug lt gt ZES 12V 200mA AC DC j Power Adapter N EZ for Transmitter j OAA 9V 500MA AC DC Power Adapter Fa for Speaker Transmitter Operation 1 2 Plug the included AC adapter into a standard wall outlet Turn on the power switch on rear transmitter A blue indicator flashes when the AC adapter is plugged in If the blue POWER indicator does not illuminate ensure the adapter is plugged in Insert the adapter connector plug firmly into the DC jack located at the back of the transmitter You can pull out a 3 5mm audio cable in front of the transmitter which you can connect it to the i pod s output jack After used just pull it for a bit and release then it will roll back automatically Mp3 Playe j 24 The rubber surface of the transmitter is specially designed for you to lay your I pod on
Download Pdf Manuals
Related Search