Blaupunkt MALTA RCR 45 User's Manual
Contents
1. The code system is on CODE will be briefly displayed each time the radio is turned on Restart following interruption of power supply Code system switched on Switch on the set CODE will appear in the display Briefly press preset button 1 0000 will appear in the display Enter the code number given in the Blaupunkt car radio passport Example the code number is 2521 Press preset button 1 twice 2000 appears in the display Press preset button 2 five times 2500 appears in the display Press preset button 3 twice 2520 appears in the display Press preset button 4 once 2521 appears in the display To confirm the code number Press the upper part of the rocker Switch Your car radio is now ready for operation If four dashes appear again in the display you have entered a wrong code number Now it is essential to enter the correct code after the waiting period has elapsed CODE in the display If the radio is turned off before the waiting period has elapsed then the waiting period restarts as soon as the radio is turned on again Switching the code system off Turn off the radio e Simultaneously press preset buttons 1 and 4 and hold them down Turn the set on CODE will appear in the display Enter the code number given in the Blaupunkt car radio passport and con firm See example Restart following interruption The code system is now deactivate2. information What you need to know Before starting to use your new car radio you should carefully read through the information on Traffic safety and Anti theft coding Traffic safety Traffic safety has always priority Use your car radio in such a manner that you are always able to cope with and react to the prevailing traffic situation at any given time Remember even at 50 km h you are still moving at a speed of 14 m per seconds It is also very important that you are able to hear and react to acoustic warning signals around you for example from the police or the firebrigade Therefore adjust the volume reasonably 18 Installation connection The code system can only be switched on and off if the radio is connected to perma nent power If you like to install your new car radio by yourself or add other audio components to the existing ones then please read carefully the enclosed instructions on installation and connection Do not connect the loudspeaker outputs to ground Only use the accessory and replacement parts approved by Blaupunkt Anti theft coding The car radio comes standard with the code System deactivated If the anti theft coding system is on while the power supply to the unit is interrupted e g theft disconnecting the car battery the set is electronically blocked Then it may only be used again after the appropriate code num ber has been entered see car radio pass port Wron
3. setting Select function LOCAL DIS COLOUR LOUD BEEP To adjust the tuning sensitivity for local reception LOCAL 1 high sensitivity LOCAL 3 low sensitivity To adjust the tuning sensitivity for distant reception DIS 1 high sensitivity DIS 3 low sensitivity To match the display colour to the dashboard illumination Select orange or green Loudness To boost low bass frequencies LOUD 0 no boost LOUD 6 strong boost Acknowledgement tone for function keys to be hold down for more than 2 seconds Ad just volume between 0 and 9 0 OFF 25 ENGLISH Appendix ARI adjust the volume of traffic Technical data announcements between 1 a 9 Amplifier Output power 4 x 6 W RMS power ac cording to DIN 45324 3 1 CODE LED To select the LED mode for into 4 Q optical theft protection LED 1 LED only flashes if FM the car is switched off sensitivity 1 0 uV at 26 dB via the ignition key signal to noise ratio LED 2 LED always flashes if ee 1 Frequency the car radio is swit response 35 15 000 Hz 3 dB ched off LED 0 No flashing Cassette Frequency To quit DSC programming and to store the response 35 16 000 Hz 3 dB setting press DSC Survey of DSC default settings LOCAL 11 DIS 11 COLOUR orange LOUD 15 BEEP 15 ARI 15 CODE LED 2 Subject to modifications 26
4. 22 Sampling stored stations briefly with Preset Scan 22 Sampling stations briefly with Radio Scan 22 Reception of traffic announce ments with RDS EON 23 Priority of traffic announcements ON OFF 4 ine tpe ges 23 Warning 23 Switching the warning beep off 23 Automatic seek tuning start 23 Adjusting the volume for traffic messages and warning beep 23 Tape operation 24 Inserting a tape 24 Ejecting a tape 24 Fast winding eene 24 Fast forward 24 Fastrewind 24 Autoreverse esses 24 Care of your audio equipment 25 DSC programming 25 Survey of DSC default settings 26 Appendix 26 Technical 26 15 ENGLISH Short description 1 Amplifier Ona Of X Volume Scan Press for 1 second When CODE lights up in the display read chapter Anti theft coding first SCAN Hold down for approximately 1 second to sample all stations to be received 16 2 Rocker switch Seek tu
5. a Radio Cassette Malta RCR 45 Operating instructions m al PT PI du Ir j EM gi LT m HH 4 rim a BLAUPUNKT Bosch Gruppe Contents Short description 16 Important information 18 What you need to know 18 Traffic safety 18 Installation connection 18 Anti theft coding 18 Wrong code number entered 18 Switching the code system on 19 Restart following interruption of power SUDply 1 1 retine 19 Switching the code system off 19 Optical indication of theft protection 19 Radio operation with RDS 20 AF Alternative Frequency 20 REG 20 Selecting a 20 Automatic seek tuning 20 Manual seek tuning 20 Adjusting the seek tuning sensitivity 21 Stereo mono switch FM 21 Changing the memory bank FM 21 Storing stations 21 Storing the strongest stations auto matically with Travelstore 21 Recalling stored stations
6. cated in the display Briefly press the desired preset button Sampling stored stations briefly with Preset Scan You can briefly sample all preset stations of the FM or TS memory bank using the Preset Scan function Press FMor TS Press PS The set will sample all stations of the selected memory bank Free preset buttons will be skipped To stop this function Press PS once again The radio will continue to play the cur rently sampled station 22 Sampling stations briefly with Radio Scan This function allow you to sample the subse quent stations briefly for approximately 8 se conds each To active Scan press button 1 for approximately 1 second Then sampled frequency or the station logo starts flashing in the display Du ring the actual searching process SCAN is flashing To select a sampled station switch Scan off press button 1 briefly If no station is selected during the scan operation the radio returns to the station where Scan has been started before Reception of traffic announcements with RDS EON Many FM broadcasters provide their service area with traffic messages at regular inter vals All traffic program stations transmit a special signal parallel to the radio program Your car radio is able to identify such traffic program station by this TP signal The display will indicate TP to confirm that a traffic program station is tuned in Other radio stations do not air t
7. d Optical indication of theft protec tion Whenthe caris stationary an optical security system in the form of a flashing LED can be activated to visualize that your radio is code protected Depending on how you have hooked up your radio three different LED modes are available which can be programmed with the DSC function See DSC programming for more details 19 ENGLISH Radio operation with RDS An ever increasing number of FM radio sta tions broadcast addition information in paral lelto their normal program via the Radio Data System to make reception even more con venient As soon as radio programs can be identified the station name and possibly the regional identifier are in the display e g NDR1 NDS local radio program in Lower Saxony Ger many With RDS the preset buttons turn into pro gram buttons Now you know exactly to which program your setis tuned in and thus you can choose precisely the desired program RDS offers further advantages AF Alternative Frequency The AF function assures that the strongest frequency ofthe selected program is tuned in automatically This function is on if the display shows AF To switch AF on off press AF briefly During seek tuning to the strongest frequen the radio operation is muted for a mo ment If SEARCH appears in the display when turning the set on or when calling up a stored frequency the set is automatically searching fo
8. g code number entered It should not be possible for thieves to ascer tain the code number by trial and error This is why the set will be blocked for a certain period of time if an incorrect code number is entered In this case will appear in the display This waiting time is 10 seconds after the first three attempts and 1 hour following subse quent attempts After 19 unsuccessful attempts OFF will appear in the display and the set can no longer be restarted Note Keep you car radio passport with the code number in a safe place in order to avoid unauthorized access to your car radio If the power supply to the radio is interrupted while the code system is switched on you need to know the right code number The radio will operate again as soon as you have entered the right code number If you lose your radio passport and have forgotten your code number you will not be able to restart the set after the power supply has been interrupted In this case your radio can only be reset in our central customer service workshop or in one of our service agencies abroad Switching the code system on Precondition The radio must be connected to permanent power In order to switch the code system on Turn the radio off Hold down the preset buttons 1 and 4 simultaneously Turn the radio on CODE briefly appears before the ra dio begins to operate Release preset buttons 1 and 4
9. he unit will automati cally switch to the other track The display will show TR1 PLAY for track 1 or A and TR2 PLAY for track 2 or B Note Ifthere istoo muchtension onthe tape during playback the set may switch to the other track by itself In this case you should check thetape Sometimes itis helpfulto rewind the tape completely Care of your audio equipment Itis advisable to only use C 60 C 90 tapes in your car stereo Protect your tapes by storing them away from dirt and dust and do not expose them to excessive temperatures abo ve 50 In order to ensure smooth tape operation cold tapes should be warmed up before they are played If dust collects on the rubber roller or on the audio head problems may arise which affect tape operation or sound quality after approximately 100 hours of operation Normally itis sufficientto use ahead cleaning cassette to clean your tape player for tougher cases use a cotton swab Q tip soaked with alcohol Never use rigid tools to clean your unit DSC programming This car radio offers direct software control DSC to adjust a number of default settings to your personal needs and store them The following step describes all the default settings which can be changed To activate the DSC mode press DSC Use the rocker switch to select and change the following adjustments The default value is shown in the display Select function ae Change _ setting Change
10. ly tune into another traffic program station If no traffic program station is found within approximately 30 seconds the tape will be stopped and you will hear a warning beep To switch the warning beep off proceed as detailed above Adjusting the volume for traffic messages and warning beep A default value is set ex factory for the volu me of traffic announcements and the warning beep You can change this default setting with the DSC function see DSC programm ing ARI TA 23 ENGLISH Tape operation Inserting a tape Turn the set on Inserta tape Eject tape Insert tape with side A or 1 facing up the open side facing to the right The tape will be played in the direction used last If TR1 PLAY is displayed this means that track 1 or A of the tape is played Ejecting a tape Press The tape will be ejected 24 Fast winding Fast forward e Press FF fast forward At the end of the tape the set will switch to the other track and start play ing it Stop fast forward Press FR Fast rewind Press FR fast rewind When the tape has rewound to the be ginning the set will play the same track again Stop fast rewind Press FF Changing the track Press simultaneously TR1 PLAY or TR2 PLAY in the display Fast forward 7 To stop press FR Fast rewind To stop press FF Autoreverse Press FR and FF at the same time At the end of the tape t
11. ning up in short steps down in short steps Extra functions Coding Enter code and confirm with A DSC mode Select and program DSC settings 3 Eject tape Press 4 Cassette slot Insert tape side A or 1 facing up the open side facing to the right 5 Fast winding of the tape autoreverse Changing the track Press simultaneously TR1 PLAY or TR2 PLAY in the display Fast rewind Fast forward To stop 7 To stop press FF press FR 6 Display Waveband Station name frequency ILI Z Memory bank 1 Preset button s announcements N Traffic program identifier Stereo symbol 7 1 2 3 4 5 6 preset buttons You can store 6 stations on each FM memory bank I Il and T To store a station Press button during radio operation and hold it down until the radio resumes play To recall a station Select a memory bank press repeatedly if necessary and then press the required preset but ton Extra function Coding Read chapter Anti theft cod ing first Buttons 1 2 3 4 To enter the four digit code Press each button repeatedly until the four digit code given in the car radio passport is displayed PS Preset Scan To briefly sample all stored stations of the selected memory bank FM I III or T 9 lo dx Seek tuning sensitivity lo lit up in the display indicates normal seek tuning sensitivity the system will pick up strong stations only d
12. r an alternative frequency 20 SEARCH goes out as soon as the system has found an alternative frequency or after the frequency band has been scanned com pletely Should the reception quality of the selected program become too bad e tune into another program REG Regional The AF function can also be used to activate and deactivate the regional function At some time of the day larger radio stations split up their main program into regional program versions offering local information If you want the radio to lock onto a regional program hold down the AF button for about 2 seconds The display will show REG ON If you leave the service area of the regional program or if you wish to use the entire RDS service switch to REG OFF Hold down the AF button for about 2 seconds until REG OFF is displayed If REG ON is activated the display will show REG ON each time the radio is switched on Selecting a station FM radio stations in the range between 87 5 and 108 MHz can be received Automatic seek tuning A V Press A V The radio will automatically tune to the following station If you press the upper or lower part of the rocker switch A V seek tuning speeds up in forward and backward direction Seek tuning down in short steps up in short steps Manual seek tuning lt lt gt gt Press or to change the frequency in small steps in either direction Hold do
13. r switch to tune to a sta tion either automatically or manually Press the desired preset button and hold it down The radio will be muted and resumes play after about 2 se conds Now the station is stored The activated preset button is indicated in the display Note If you tune into a station which has already been stored on another memory bank the corresponding preset button and the memo ry bank will start flashing on the display for a short while Storing the strongest stations automatically with Travelstore You can use the Travelstore memory bank to automatically store the six strongest FM sta tions sorted on the preset buttons according to their signal strength This feature is especially useful when travelling because it will always give you the most powerful stati ons at a fingertip as you pass through the various reception areas Press TS for at least 2 seconds The radio will seek for the most powerful nearby FM stations and store them on the memory bank T Travelstore Once the process is completed the station allocated to preset button 1 will be played FM stations can also be stored manually on the Travelstore bank see Storing stations 21 ENGLISH Recalling stored stations You can recall any stored station by pressing the corresponding preset button Use the FM or TS button to select the desired memory bank For this purpose press FM until the desired memory bank is indi
14. raffic announ cements by themselves but offer the possi bility to receive the traffic announcements of another radio station within the same radio network During reception of such a station e g NDR3 TP lights on the display as soon as the priority of traffic announcements is activated Then the display has to light TA If a traffic announcement is aired your radio will switch to the traffic program station for the duration of the message and will switch back to the previous station after the end of the message Priority of traffic announcements ON OFF TA lights up in the display if the priority of traffic announcements is on To switch the function on and off press the TA button Warning beep Whenever you leave the reception area of the traffic program station you are tuned to you will hear a warning beep after approxi mately 30 seconds This warning beep will also be released if you press a preset button to recall a preset station without traffic program Switching the warning beep off a Tune to another traffic program station Press the rocker switch 2 or press a preset button to recall a traffic program station or b Switch the traffic message priority off Press TA TA goes out in the display Automatic seek tuning start During cassette operation If you leave the reception area of your traffic program station while you are playing a cas sette the car radio will automatical
15. wn the right or left part of the rocker switch to speed up this process Adjusting the seek tuning sensi tivity Two basic levels can be selected for the seek tuning sensitivity If lo is displayed the radio will only tune to strong stations low sensitivity If dx is displayed you will also receive less powerful stations higher sensitivity To change the seek tuning sensitivity press lo or dx The two basic sensitivity levels can be further varied see DSC programming Stereo mono switch FM You can switch to mono when the reception quality becomes poor Press lo for approximately 2 seconds During mono reception the stereo sym bol C will go out in the display Each time the car radio is switched on the radio will automatically be setto stereo recep tion It will automatically shift to mono when the reception quality becomes poor Changing the memory bank FM You can shift between the memory banks I II and Ill to store and recall preset stations The selected memory bankis indicated in the display Press FM until the desired memory bank lights up in the display press re peatedly if necessary Storing stations On each FM memory bank I II you can store six stations on the preset buttons 1 2 3 4 5 6 Select the memory bank by pressing FM or TS to adjust the waveband Press the FM button to select one of the FM memory banks Usethe rocke
16. x lit up in the display indicates high seek tuning sensitivity the system will also pick up weaker stations To change the seek tuning sensitivi ty press lo or dx DSC Direct Software Control Use the DSC function to change a number of basic settings See DSC programming for more details 17 AF Alternative Frequency in RDS mode If AF is on the radio will automatically switch to the strongest frequency of the same program AF on off press AF briefly 12 TA Traffic Announcement If TA is on only traffic announce ments will be received TA on off press TA 13 TS Travelstore To store the six most powerful nearby stations automatically with Travelstore Store Press TS until seek tuning starts see display Recall Press TS until T appears in the display Then briefly press one of the presets 1 2 3 4 5 6 14 FM FM To select one of the FM memory banks I Il or 1 To change the memory bank Press button until the desired memory bank is indicated in the display 15 TRE Treble BAS Bass BAL Balance left right FAD Fader front rear To select press TRE BAS BAL or FAD The set value is shown in the display e g TRE 5 Then use the rocker switch 2 to chan ge the value Press any other button to store the new value If the value is not changed within 8 se conds the display will show the pre vious setting again 17 ENGLISH Important
Download Pdf Manuals
Related Search