Blaupunkt BARCELONA RCM 104 A User's Manual
Contents
1. Use this function to select the language for the PTY indications in the display Choose between DEUTSCH or ENGLISH Use this function to change the default allocations of the preset buttons Press the preset button to be changed Use the rocker switch lt lt gt gt to select the desired program type and press the preset button once again Use this function to specify the scan time for the radio or cassette mode from between 5 and 30 seconds Use this function to adjust the seek tuning sensitivity for distant reception DX 1 high sensitivity DX 3 low sensitivity 45 ENGLISH S LO 1 SPEECH ST NAME TA LEVEL 46 Use this function to adjust the seek tuning sensitivity for local reception LO 1 high sensitivity LO 3 low sensitivity The seek tuning sensitivity values can be separately adjusted for AM and FM In future many RDS broad casters will differentiate bet ween music and speech programs Use the SPEECH function to separately adjust the sound settings for speech programs With this function you can name any preset radio stati on with a character se quence of up to 8 digits see Station naming Use this function to adjust the volume for the traffic announcements and the warning beep from between 1 and 9 The announcement will then be broadcast at this volume TIM TIME To adjust the TIM time To activate deactivate TIM For more information see chap2. PTY function is activated The program types listed below will then be available The letters printed in bold correspond to the actual PTY indication briefly displayed NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE education DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC M O R M middle of the road music LIGHT M light classical CLASSICS serious classical OTHER M other music PTY 16 to PTY 30 are not yet assigned Displaying the program type e Press lt lt or gt gt The program type selected last will be briefly displayed Selecting a program type a Using the preset buttons If PTY is switched on you can select the program types assigned at the fac tory with preset buttons 1 6 If you would like to store other PTYs read through chapter DSC pro gramming PTY SET e Press one of the buttons 1 6 The display shows the selected program type for three seconds e Press A V while the PTY is display ed This will start seek tuning for a station offering the specified pro gram type b Using the lt lt gt gt rocker switch If PTY is switched on you can select a program type via the lt lt gt gt rocker switch e Press lt lt or gt gt The PTY selected last will be displayed for three se conds During this period choose the desi red program type with lt lt back wards or gt gt forwards direction e Press lt lt or gt gt as many times
3. Scan Beginning with the station currently tuned in you can scan the following stations Choose the desired SCANTIME in the DSC menu To activate the scan Press PS for about 2 seconds Either the scanned frequency or the station name starts flashing in the dis play During the actual scan process SCAN is flashing To continue listening to a scanned stati on switch the scan off e Briefly press PS If no station is selected during the scan the scan function will be automatically switched off after the entire frequency band has been passed through The radio will revert to the station the scan began from For more information please also refer to chapter DSC programming SCANTIME PTY Program Type PTY is an RDS service offered by more and more radio broadcasters This feature allows you to select FM stations in accordance with their program type As soon as you have chosen the PTY of your preference the cor 36 responding stations can be selected by seek tuning or with the scan function Switching PTY on off e Press PTY When the function is active the display will briefly show the program type selected last PTY is permanently indicated in the lower right corner of the display Program types Use lt lt gt gt to let the system display the program type selected last and to choose a new one You can select stored PTYs with the preset buttons 1 6 For this it is necessary that the
4. as required Tuning into a station with PTY You may let the system find you the stations offering the adjusted program type using the seek tuning rocker switch or the PS SCAN button Precondition PTY must be illuminated on the display e Press lt lt gt gt or PS Seek tuning will stop at the first station offe ring the desired PTY If you have pressed PS SCAN the stations received will be scanned once until you switch SCAN off again press PS once again PTY priority When PTY is activated the system will con stantly search forthe corresponding program type within the station network of the recei ved program If you listen to NDR2 for example the set will also search through the other NDR programs to find out whether there is a program offering the desired PTY During radio operation as soon as such a program begins the unit will switch over to this program for the duration of the corre sponding broadcast During tape or CD operation the system will release a BEEP and display the program type in order to let you know that a program offering the desired PTY has started e If you wish to listen to this program press SRC to switch to radio operation Note As mentioned before the PTY function is presently not available with all RDS stations Station naming Using the ST NAME item of the DSC menu you can enter a name with a maximum of 8 digits for all stored frequencies of memory
5. banks I and Il Most of the FM stations are RDS stations the names of which will be shown in the display The displayed RDS name has priority over all entries specified by the user If you have named an RDS station this name will only be shown briefly and be replaced by the RDS name afterwards For this reason we recommend that you only name non RDS stations which only show their frequency but not the name All long wave stations are provided with a station name at the factory To start your entry Choose a station press DSC e select item ST NAME with rocker switch A V and press dB The first position is flashing Now select a character with rocker switch A V You have the choice between the capital letters A Z special characters and the numbers 0 9 37 ENGLISH e Use the rocker switch lt lt gt gt to move to the next position and select a charac ter In this way up to 8 characters can be en tered Once you have completed the name as desi red press dB now the entry has been stored The display returns to ST NAME To name the next station Select it with one of the preset buttons 1 6 if required change the memory bank and or waveband Then start to enter the next name To finish the entry press DSC You will leave the DSC menu at the same time Any name entered for a preset station will be deleted by re assigning it either with aname or fre
6. re activate the TIM function according to your preference RT Radiotext Radiotext is an RDS feature used by the broadcasters to transmit texts The texts can be displayed in two subse quent lines with a maximum of 64 characters each which are moved through the display slowly Depending on the individual broadcaster these texts can be of a different nature for example brief news program information commercial broadcasts etc For safety reasons the radiotext function can only be used if the ignition is switched off When activating RT with the ignition being switched on the message NO TEXT will appear in the display To read radiotext messages proceed as follows Park the vehicle in a suitable place and turn off the ignition The radio will be switched off automatically In order to re activate the car radio press the ON button for about 1 se cond Select a station and press RT It takes some time until the aired messages are fully available in the system In the mean time the radio will display the message WAIT Afterwards the text will be displayed If the adjusted station does not provide radio text information the message NO TEXT is displayed To switch off radiotext Press the RT button once again 41 ENGLISH Tape operation In order to play a tape the car radio has to be switched on The unit automatically switches to tape ope ration when
7. tongue flash in order to indicate that the set is equipped with security coding Use DSC to select one of two settings LED ON or LED OFF For more information please read through chapter DSC programming LED ON OFF KeyCard The car radio can only be operated using either KeyCard 1 or 2 Their codes are stored in the unit Turn on the set and introduce the KeyCard completely The car radio is now ready for operation When inserting a wrong KeyCard the display will show After approximately 10 seconds CARD ERR will appear in the display In this case do not make any further adjustments until you have the corresponding KeyCard availa ble Never try to pull out the KeyCard by force 32 First slightly press the card in This releases the KeyCard the display shows LEARNING Now you can pull out the card Should the KeyCard be lost or damaged then please contact one of our authorised service partners to get a new card The service centres are marked O in the car radio service centre list In case of doubt please contact the central service centre in your country for more information on the KeyCard service centre closest to you Use either KeyCard 1 and 2 to individually store the following functions as desired bass treble balance and fader settings pre set stations loudness TA traffic announce ment volume SPEECH tone control for speech programs BEEP volume SCANTI ME VOLFI
8. M function being activa ted The antenna may also be extracted in the car wash when the set is turned off and the TIM function activated TIM is deactivated TIM OFF if the motor antenna is retracted as soon as the set is turned off You can now drive through a car wash when the radio is off Do not switch on the radio until you have left the car wash If the display shows TIM ON when switching off the radio then the TIM timer is activated The motor antenna will remain extracted If you are sure that now and while being in the car wash you are outside the recording period around the adjusted TIM TIME adjusted start TIM TIME end I 1 5 hours ee 1 5 hours The motor antenna will be extracted e Switch off the radio and press TIM The display briefly shows STBY OFF The antenna will then remain retracted when the radio is turned off until the three hour recording period starts Attention You should by all means deactivate the TIM timer TIM OFF if the adjusted re cording period is soon to start For this purpose Press DSC with the radio being activa ted Use the A V rocker button to select the item TIM TIME e Press dB and switch to TIM OFF with rocker button A V you find this item between the time settings for 23 00 and 0 00 If you now turn off the radio the anten na will be retracted You can now drive into the car wash After you have left the car wash you may
9. ORT POP MUSIC SCIENCE etc G TIM TA TIM Trafflc Memo To play all the stored traffic announce ments Press TIM briefly To activate deactivate the priority for traffic announcements Press TIM for approximately 2 seconds TA Traffic Announcement If TA lights up in the display the system will only play traffic stations TA on off Press the TIM button for approximately 2 seconds Note the warning under Traffic Memo TIM 12 1 2 3 4 5 6 preset buttons You can store 6 stations on each FM memory bank I Il and T and another 6 stations on MW and LW each To store a station Press button during radio operation and hold down until the radio comes on again To recall a station Select the wave band On FM select the desired memo ry bank and press the corresponding preset button 43 PS Preset Scan Press button briefly to scan the stations stored on the preset buttons SCAN For briefly playing all receivable stati ons or the titles during tape or changer operation option To start stop Scan Press PS for ap prox 2 seconds The scan time can also be altered see chapter DSC programming SCANTI ME RM Radio Monitor Press this button to listen to the radio while fast forwarding or fast rewinding the tape During tape operation To switch RM on off Press RM When this function is activated the display shows RM The radio is played during fast t
10. Operating instructions O50 BLE i Io Mix FMT N u lo FP Aga T Ci O gt LD AF TF raPrr ML BLAUPUNKT EAATELOMA ADA NM A hl Barcelona RCM 104 A HDR 2 F Mr fies ar TP TA IERT Table of contents Quick instructions 27 Important notes unnnserennnnnnnennnnn 31 What you really have to read 31 Traffic Safety 0 eee eeeseeeeseeeeeeneeeee 31 Installation connection seee 31 Optical indication of theft protection 32 Keybard az a esnnel tsekienn 32 Replacing a KeyCard 32 Selecting the operating mode 33 Radio operation with ADA and RDS ana 33 ADA nee 33 ADD Hast deh Bertha 33 AF Alternative Frequency 33 REG Regional a se 34 Selecting the waveband 34 Automatic seek tuning eee 34 Manual seek tuning eeeseeeees 34 Adjusting the seek tuning sensitivity 34 Stereo mono switch FM 34 Changing the memory bank FM 35 Storing stations ueeesnenssennsneennnennnn 35 Storing the strongest stations auto matically with Travelstore 35 Recalling stored stations 35 Preset SCANNING uuesnseersennner ernennen 35 Scanning stations with Radio Scan 36 26 PTY Program Type neezennnesennnenenenen 36 Station NAMING 2erneer seen nnennnenn nenn 37 Reception of traffic an
11. Selecting the waveband This car radio can be used in any of the three following wavebands FM 87 5 108 MHz MW 531 1602 kHz and LW 153 279 kHz 34 e Select the desired waveband by pres sing the FMT or MeL button To switch between MW and LW press MeL Automatic seek tuning A V e Press A V The radio will automatically tune into the following station If you keep the upper or lower part of the rocker switch A V depressed seek tuning speeds up in upwards or downwards direc tion down in short intervals when AF is off down Manual seek tuning lt lt gt gt Prerequisite AF is switched off e Press lt lt or gt gt to change the frequency in small steps in upwards downwards direction If you hold down the right or left part of the rocker switch then the car radio will move through the stations quickly Adjusting the seek tuning sensi tivity The set allows you to modify the seek tuning sensitivity If lo is indicated the radio will only pick up strong stations low sensitivity If lo is deactivated the radio will also pick up less powerful stations higher sensitivity The degree of sensitivity can be separately adjusted for both levels see chapter DSC programming Stereo mono switch FM If reception is poor you may get better sound quality if you switch to mono Press lo for approximately 2 seconds The stereo symbol co will disappear for m
12. Use the rocker switch and the dB button to make your selection from the following functions and to carry out the desired adjust ments The current setting for that function will appear in the display Select function Select function 44 TIME CDC NAME ADA The current time will be dis played or it has to be adju sted Use the rocker button lt lt gt gt to select the hours or minu tes flashing and the A V switch to set the time Start with dB The precise time setting is required for the proper operation of TIM only if changer is connec ted Use this function to name your discs see also CD changer control Entering displaying CD names ANGLE To switch the ADA system on off and to test the anten nas Use the lt lt gt gt rocker switch to activate one of the follo wing modes ADA OFF ANT 1X ANT 2 X ADA ON X The X stands for a number between 0 and 9 depending on the intensity of the anten na signal BAS F R TRE F R Test If the antenna signal intensi ty between ANT enna 1 and ANT 2 still varies strongly even after having changed the vehicle position by metres you should have the antenna furnishing the wea ker signal checked ADA ON OFF Normal setting ADA ON If only one antenna is con nected you should adjust ADA OFF Use one of the values 1 0 or 1 to adapt the individual viewing angle Adjust the ANGLE so as to provide the best vi
13. X In addition to this the settings activated be fore switching the radio off such as the wavebang station TA priority loudness AF CPS Dolby B C RM REG ON OFF or seek tuning sensitivity will also remain stored When you insert your KeyCard the basic settings you have programmed will automa tically be activated Replacing a KeyCard Any KeyCard can only be replaced by a new one with the same number 1 or 2 Should you wish to replace KeyCard 2 for example Insert KeyCard 1 and switch the radio on e Slightly press the card and it will move into the removal position LEARNING will then appear in the display Remove KeyCard 1 and insert the new KeyCard 2 while the display is still showing LEARNING Now you can operate the set with the new KeyCard 2 You can switch the radio on only after inser ting either a KeyCard 1 or 2 Selecting the operating mode With the SRC source button you can select between the following modes radio tape CD changer option or operation of another audio component connected To select one of the operating modes it is of course necessary that the corresponding system is available i e the add on compo nent must be adequately connected and the sound carrier cassette disc changer maga zine inserted To switch over to the next operating mode available e press the SRC button Radio operation with ADA and RDS ADA This car radio features ADA Au
14. a cassette is inserted Inserting a tape Turn on the set Insert the cassette The cassette is automatically transported to the playback position The system then starts to play back side A or 1 During tape operation the display shows TR1 or TR2 track Insert cassette with side Ao 1 Eject facing up the open side facing cassette to the right Removing a tape e Pressa The cassette will eject 42 Fast forward rewind Press gt gt to fast forward a tape FF Press lt lt to fast rewind a tape FR Fast rewind CPS Select title in forwards direction CPS Select title in backwards direction To stop the function Press the opposite button lt lt gt gt 0r A V Fast forward Selecting titles with CPS Cassette Program Search Use this function to repeat or skip cassette titles with buttons A forwards or V back wards The system allows you to skip up to 9 titles For this purpose press the rocker switch as many times as required The display will show you the number of titles to be skipped Correct your entry by pressing the opposite button Press AV to stop the tape immediately For CPS operation it is necessary that there is a blank section of at least 3 seconds between the titles Autoreverse To switch sides while playing a cassette press AV At the end of a side the unit will automatically switch over The display shows TR1 for s
15. ape run 5 B C Dolby B C NR This set allows you to play back tapes that have been recorded with Dolby B NR Dolby C NR or without Dolby noise reduction Press B C to adjust to the type of Dolby NR in which the tape was recorded or to disengage Dolby NR When Dolby is active the corresponding indicator B or C will light up 29 ENGLISH Eject button Press amp 17 Cassette loading slot Insert tape side A or 1 facing up the open side showing to the right Tape side selector Press AV to switch over during tape operation The display shows TR 1 track or TR 2 MIX see chapter CD changer control BLS Blank Skip Use this function to skip blank sections of the tape As soon as an unrecorded portion of more than 15 seconds is detected du ring playback the system will automati cally forward the tape to the beginning of the next title In this case the display will show CPS FF To switch BLS on off Press the BLS button When the function is active BLS will light up in the display 30 1 lo To change the seek tuning sensitivity lo lit up in the display indicates normal seek tuning sensitivity the system will only pick up powerful nearby stations lo off indicates high seek tuning sensiti vity the system will also pick up wea ker stations To change the seek tuning sensitivi ty Press lo Using DSC it is possible to preset the seek tuning
16. d Press the dB button The first character position is flashing e Use the rocker switch A V to enter the first letter special character or digit from 0 9 Use the rocker switch lt lt gt gt to change to the next position and select a cha racter Each name may have up to 7 characters 48 To finish the entry Press dB The entry is stored and you can now select another DSC function using the rocker switch A V Alternatively e Press DSC The entry is stored and the DSC mode is automatically quit To store the entry choose the next CD Press dB and select the next CD to be named using lt lt gt gt Press dB and enter a name Any specified name will be deleted by re assigning it with a new CD name Deleting CD names If you try to store more than 99 CD names FULL will be shown in the display In this case you can use DSC to delete the name of one or more CDs in order to get new memory capacity Use the CDC UPD function to confirm all CDs the names of which you wish to main tain All the other names will be deleted e Press DSC Insert a magazine with the CDs the names of which you wish to maintain e Press A V until CDC UPD is display ed e Press lt lt gt gt and LOAD CD is display ed After having read in the CDs of this magazi ne NEXT MAG appears in the display e Press the EJECT button on the CD changer and insert the next magazine Re
17. d hold down Select disc downwards i Select disc upwards Repeating a track Press briefly Selecting a track downwards Briefly press twice or more REVIEW fast reverse audible Press and hold down Extra functions AUD see GEO see 25 DSC MODE see 2 Select function and program parameter AF in the display Use the lt lt gt gt buttons to scroll through the programs of a radio AF MODE network e g from NDR1 to NDR4 North German broadcaster 7 Display Radio mode Station name RIAS DSK Waveband Memory bank FM 1 TR 1 track 1 Dolby B NR CD mode option Disc number title number KeyCard In order to operate the set the Key Card has to be inserted For this purpose introduce the Key Card contact area showing up into the corresponding slot above the Key Card tongue Read also the information given in the KeyCard chapter AF button alternative frequency du ring RDS operation When AF lights up in the display the system will automatically seek a fre quency offering better reception of the same RDS program AF on off Press the AF button briefly When pressing the AF button for about 2 seconds the display will show REG ON or REG OFF see also chapter REG Regional PTY button Program Type Activates the PTY mode In the PTY mode the station buttons become pro gram buttons for programs such as NEWS SP
18. djusted station If the priority for traffic announcements is activated TA lights up in the display the set will also record the traffic messages of the traffic station program within the same radio network see also Reception of traffic an nouncements with RDS EON Depending on the length of the new traffic bulletin the oldest messages will be deleted If a message is longer than four minutes the system will display OVERFLOW after four minutes of playback and release abeep tone to indicate that the message could only be recorded partially A Warning The motor antenna could be damaged in a car wash If you have installed a motor antenna then please take into account the corresponding warning note at the end of this chapter Recalling stored traffic announcements Press the TIM button briefly The display for example shows NDR2 sta tion name or frequency then briefly T4 14 30 T4 traffic message 4 recorded at 14 30 If four traffic messages were recor ded then T4 always represents the most recent announcement which will also be played first Use the A V rocker button to switch between T1 and T4 Hold down the A V rocker button to move through the message in forwards backwards direction quickly Press lt lt to go back to the beginning of the currently played message The TIM function is switched off by either pressing TIM or gt gt TIM standby mode when the radio is turned of
19. ew To distribute the bass level among the front and rear speakers between 6 dB front and 6 GB rear To distribute the treble level among the front and rear speakers between 6 dB front and 6 GB rear BEEP BRIGHT COLOUR This sound will confirm CDC DISP functions which are comple ted by pressing a button for longer than 2 seconds Adjust volume between 0 and 9 0 OFF You can adjust the display brightness from values bet ween 1 and 16 You can also select one day and one night adjustment Selecting the night bright ness Switch on the vehicle s light ing system and program the brightness value The audio equipment must be connec ted with the vehicle lighting for this to function properly LED ON Step by step adjustment of the display colour LOUDNESS only if changer is connec PTY LANG ted During CD operation use lt lt gt gt to select between the following displays NAME the CD name specified with CDC NAME TIME the playback time NUMBER the CD or track number PTY SET You can select between LED ON and LED OFF When setting LED ON the Key Card tongue will flash for additional optical theft pro tection when the set has been switched off and the KeyCard removed SCANTIME S DX 1 When listening at a low level the loudness function will create a more natural sound by emphasizing the low fre quency range LOUD 1 low boost LOUD 6 strong boost
20. f With this system it is possible to record inco ming traffic announcements automatically at pre determined times when the radio is tur ned off You may then recall such messages as des cribed above If you press the TIM button while a traffic announcement is being played TA lit up in the display the recording will be interrupted 39 ENGLISH When pressing TIM once again you will hear the message text recorded until that interrup tion Setting the time in the DSC menu TIM needs the exact time in order to operate precisely The time also has to be re adjusted after every interruption of the power supply Press DSC and the time will be display ed e Press lt lt to set the hours or gt gt to ad just the minutes The corresponding value is flashing To change the setting press the rocker button A V To confirm your entry press dB or DSC When pressing the dB button you can go on working in the DSC menu immediately Adjusting the TIM standby mode TIM time The TIM TIME to be set corresponds to the planned departure time TIM will then be active 1 5 hours before and after this adju sted time so that the traffic messages will be recorded during a period of three hours Note During this period a motor antenna will remain extracted Please take into account the warning note of the end of this chapter 40 adjusted start TIM TIME end Ha 1 5 hours fe 1 5 hours T
21. he motor antenna will be extracted Use the rocker button A V to choose TIM TIME in the DSC menu e Press lt lt or gt gt to call up the adjusted time If TIM OFF is displayed the TIM function is deactivated Use the rocker button A V to set the time Use lt lt to move to the hours or gt gt to adjust the minutes Confirm your entry by pressing dB or DSC The TIM TIME is stored TIM will be active 1 5 hours before and after the adjusted TIM TIME Also TIM will automatically stay on standby for three hours after the radio was turned off When TIM is activated the display will briefly show TIM ON when the set is switched off Deactivating the TIM standby mode e Press DSC with the radio being turned on Use the A V rocker button to select the item TIM TIME Press dB and switch to TIM OFF with rocker button A V you find this item between the time settings for 23 00 and 0 00 When TIM OFF is flashing press DSC or dB Ifthe motor antenna is retracted immediately after selecting TIM OFF you can be assured that the TIM function is deactivated Note If the TIM function is not used for a longer period of time we recommend you to switch it off in order to avoid that the battery goes flat A Warning The motor antenna could be damaged in a car wash If you have a motor antenna installed it will remain extracted after you have turned off the radio with the TI
22. he warning beep off a Tune to another traffic program station Press the rocker switch or press a preset button with a station offering traffic information Alternative b Switch off the priority for traffic an nouncements e Press TIM gt 2 sec In the display the TA indication goes out You can reduce the beep tone volume to the pre selected mute volume e For this purpose press dB Automatic seek tuning start Prerequisite The priority for traffic announcements is ac tivated If you leave the reception area of your traffic program while listening to a tape or disc or when having turned down the volume completely the car radio will automatically tune into another traffic program station If no such traffic program station is found within approximately 30 seconds tape or disc reproduction will be interrupted and the system will release a warning beep To switch the beep off proceed as described above Adjusting the traffic message volume The volume of the warning beep and of the current traffic message was pre adjusted at the factory If you would like to alter the setting proceed as described under DSC programming TA LEVEL Traffic Memo TIM This set is equipped with a digital speech memory allowing up to 4 traffic messages lasting a maximum of 4 minutes to be auto matically recorded As soon as TP is displayed the system will record all incoming traffic announcements of the a
23. ide 1 or TR2 for side 2 Note If there is too much tension on the tape during playback the set may switch over by itself In this case check the condition of the tape Sometimes it helps to rewind the cassette tape completely Tape type detection Correct equalization is automatically selec ted according to the tape used Scanning cassette titles with SCAN You can have the cassette titles played briefly by using the scan func tion If you like a title stop the scan to continue listening to that track To start stop the scan e Press PS briefly Choose the desired SCANTIME in the DSC menu Dolby B C NR Use this button to play tapes recorded with Dolby noise reduction Dolby C NR is a further development of Dol by B NR and reduces the unwanted tape noise even more Press B C to adjust to the type of Dolby NR in which the tape was recorded or to disenga ge Dolby NR When Dolby is active the corresponding indicator B or C will light up Noise reduction system manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories Skipping unrecorded tape sec tions with BLS Blank Skip As soon as the system detects a blank tape section of more than 15 seconds the casset te will automatically be fast forwarded to the beginning of the next track The display will then show CPS FF To switch BLS on off Press BLS If
24. isplayed briefly then for example 1 CD1 T1 Repeating a track Press briefly are played at random CD disc T track Selecting a track downwards MIX OFF MIX is switched off The tracks Briefly press twice or more REVIEW fast reverse audible Press and hold down are played in numeric order CDno Track no To change the MIX mode e Press MIX until the desired mode is briefly shown in the display If MIX is on MIX will appear in the lower The display mode name time or number can SCAN right corner of the display be selected under CDC DISP in the DSC Use this function for briefly sampling the CD AME SiE menu tracks e hoe To start the scan f Press PS on the car radio for approxi mately 1 sec The tracks will be briefly played in ascending order The display shows the selected mode 47 Entering displaying CD names With this system you can name up to 99 CDs When playing a CD the dis play will then give you the entered name for example VIVALDI Precondition NAME must be selected under DSC CD DISP To enter the name First switch off the priority for traffic an nouncements Otherwise the entry will be deleted if an announcement is broadcast Press the TA button to switch the TA dis play off Be sure that at least one CD is inserted in the CD magazine e Press SRC to change to CDC e Press DSC e Press the rocker switch A V until CD NAME is displaye
25. istening to This function is activated if AF lights up in the display In order to switch AF on off Press the AF button briefly During seek tuning for the frequency offering the best reception of the selected program the radio will be muted briefly When SEARCH appears in the display after the radio has been switched on or one of the stored frequencies retrieved then the radio is automatically searching for an alternative frequency SEARCH goes out as soon as the system has found an alternative frequency or after the frequency band has been run through completely 33 ENGLISH Should the reception quality of the selected program become too bad tune into another program REG Regional Certain radio programs are split up at times into regional programs offering local informa tion If you are listening to one program and move to an area where another linked regio nal program becomes stronger the unit will switch to that program If you wish to continue listening to the first station e Press the AF button for about 2 sec The display will show REG ON If you leave the service area of the regional station tuned into or if you would like to take advantage of the full RDS service then switch to REG OFF Press the AF button for about 2 sec until REG OFF is displayed The display will show REG ON or REG OFF every time the radio is switched on
26. n situation at all times Never use your car radio Balance in a way that could distract you rignt Please keep in mind that you travel a di stance of 14 m per second at a speed of only 50 km h Do not adjust your radio in difficult driving Fader rear conditions that demand your full attention Always make sure that you are still able to hear any warning signals coming from outsi de of the vehicle such as police or fire engine sirens so that you can react accordingly Balance left The last setting will be stored automati cally If the setting remains unchanged within 8 seconds the display will switch back to be previous indication Installation connection In order to ensure that the set functions RT Radiotext properly it is necessary that the positive po Use this function to display message wer supply line is connected to the ignition texts transmitted by an RDS station RT and the permanent 12 V connector of the messages will only be displayed if the car radio ignition is switched off If you would like to install your new car radio Turn on the set by yourself or add other audio components to the existing ones then please read carefully the enclosed instructions on installation and connection 31 Do not connect the loudspeaker outputs to ground Use only the accessory and replacement parts approved by Blaupunkt Optical indication of theft protection When the car is stationary you can let the KeyCard
27. ng a CD track using the rocker SWITCH ven ae 47 SCAN ana aan 47 Mina Rohe eeiel yee eee 47 Entering displaying CD names 48 Deleting CD names 48 Survey of DSC default settings 49 Appendix uusessnnnnenennnnnnnennnnnnnnnnnnn 49 Technical data uusr444e nennen 49 Quick instructions 1 Switching on Press the ON button the KeyCard has to be inserted the set plays with the pre adjusted volume Switching off Press ON for approximately 1 second If the set was turned on by pressing ON the KeyCard can be used for swit ching the system on and off Please read the information of chapter Key Card The set may also be turned off via the vehicle s ignition provided that it was connected correspondingly After the ignition was switched off a double beep tone reminds you that you should remove the KeyCard before leaving your vehicle To operate the set when the ignition is switched off KeyCard is inserted pro ceed as follows Press ON after the double beep tone The set will be turned on To avoid that the battery goes flat the system will be turned off automatically after a playback time of one hour 2 To change the volume Press VOL VOL Each time the set is switched on it will play with the pre adjusted volume VOL FIX You may also change the VOL FIX setting see chapter DSC pro gramming 3 FMT Press this but
28. nouncements with RDS EON nmuuu444HH Henn 38 Traffic announcement priority on off 38 Warning beep uunersneersnnnne nennen nn 38 Switching the warning beep off 38 Automatic seek tuning start 39 Adjusting the traffic message volume 39 Traffic Memo TIM 39 A Warning 39 Recalling stored traffic announce MONIS 2 cn an 39 TIM standby mode when the radio is Turned Off wa ee dee ee 39 Setting the time in the DSC menu 40 Adjusting the TIM standby mode IIMtimeza er se 40 Deactivating the TIM standby mode 40 A Warning sense 40 RT Radiotext 2 24444 nennen 41 Tape operation unnseenneeennenennennnn 42 Inserting a tape mnenunnennnne namen 42 REMOVING a tape seeren 42 Fast forward rewind seee 42 Selecting titles with CPS 42 Autoreverse nunnsnenensennnneennnnnennnennnnnnn nen 42 Tape type detection 42 Scanning cassette titles with SCAN 43 Dolby BC NR nennen 43 Skipping unrecorded tape sections with BLS Blank Skip ne 43 Listening to the radio during fast winding with RM Radio Monitor 43 Care of your audio equipment 43 DSC programming ursreunenenn 44 CD changer control option 47 Switching the CD mode on using SRC of the car radio 47 Selecti
29. ono playback Each time the car radio is switched on stereo playback is activated The unit will automatically switch to mono playback under poor reception conditions Changing the memory bank FM You can shift between the memory banks I II and T to store and to recall preset stations The selected memory bank is indicated in the display e Press FMT until the desired memory bank lights up in the display press re peatedly if necessary Storing stations Using the preset buttons 1 2 3 4 5 6 you can store six stations on each FM memory bank I Il T In the MW LW range you can store six stati ons each Select the waveband with the FMT or MeL button e Select a station with the rocker switch either automatically A V or manually lt lt gt gt Press the desired preset button and hold it down The radio will be muted and resumes play after approximately 2 seconds Now the station has been stored The activa ted preset button is indicated in the display Note Should you tune into a station which has already been stored the corresponding pre set button and the memory bank will start flashing in the display for a short while if you have selected another memory bank Storing the strongest stations automatically with Travelstore You can use the Travelstore memory bank to automatically store the six strongest FM sta tions sorted on the preset buttons according to their signal s
30. peat these steps for all CDs the names of which you wish to maintain e To finish your entry press dB for about 2 sec until UPDATING is dis played The updating process is com pleted when the display shows READY The names of all CDs inserted in the maga zine remain stored in the memory The other CD names have been deleted You can interrupt this process by pressing DSC Appendix Survey of DSC default settings Technical data TIME 00 00 Amplifier ADA ON Output power 4 x 20 watts RMS acc 5 ANGLE 0 to DIN 45 324 3 BAS F R 4 x 25 watts music ui power acc to TRE Fah DIN 45 324 BEEP 4 BRIGHT 16 FM sensitivity 0 7 uV at 26 dB COLOUR Medium position orange S N ratio en Dane Frequency response ED on ar 35 16 000 Hz 3 dB LOUDNESS 3 Tape metal 30 18 000 Hz 3 dB PTY LANG DEUTSCH PTY SET NACHRICH TEN SCANTIME 10s S DX 1 S LO 1 SPEECH 0 TA LEVEL 5 TIM TIME 07 00 VOL FIX 26 We reserve the right to make changes 49 Blaupunkt Werke GmbH Bosch Gruppe 1 95 K7 VKD 3 D94 147 028 PM
31. quency 38 Reception of traffic announcements with RDS EON Enhanced Other Networks Many FM broadcasters provide their service area with traffic messages at regular inter vals All traffic program stations transmit a special telegram signal alongside their programs which is recognised and decoded by the car radio As soon as such a signal is received the display shows TP Traffic Program Other radio stations do not actually air traffic announcements themselves but by using RDS EON they make it possible to receive the traffic announcements of another station within the same radio network In this case TP will light up in the display as soon as the priority for traffic announcements is activa ted The display must then show TA If a traffic announcement is broadcast the radio will automatically switch to the linked traffic program for the duration of the messa ge and return to the original program after the end of the message Traffic announcement priority on off If the priority for traffic announcements is activated TA will appear in the display To switch the function on off Press the TIM button gt 2 sec Warning beep If you leave the reception area of the traffic program station you are currently listening to you will hear a warning beep after approxi mately 30 seconds This warning beep will also be released when pressing a preset without a traffic program Switching t
32. sensitivity for local S LO and distant reception S DX For more information read chapter DSC programming 22 DSC Direct Software Control Use the DSC function to adapt a num ber of programmable basic settings to suit your listening preference For more information read through chapter DSC programming 23 LD loudness Use this function to boost the low fre quencies for more bass especially at low volume levels To switch LD on off Press the button When the loudness function is activa ted the display shows LD For more information see chapter DSC programming AUD To adjust the treble and bass frequen cies using the rocker button Treble Bass Treble The last setting will be automatically stored If the setting remains unchanged within 8 seconds the display will switch back to the previous indication Important notes 5 GEO To switch RT on Press RT and wait What you really have to read To adjust the Balance left right and until the message text appears on the Bef t dio pl Fader front rear settings display FIR VOU OPEN VOUT NEW CANTAOIO pea To switch RT off Press RT se read the following information carefully 5 Fader front Traffic safety A 7 SRC source To select between the connected audio As the driver of a motor vehicle it is your sources for example cassette radio or responsibility to pay attention to the traffic CD changer optio
33. ter Traffic Memo TIM Adjusting the TIM standby mode CDC UPD _ only if changer is connec ted Use this function to delete disc names in order to get new memory capacities for other CD names see also CD changer control Dele ting CD names VOL FIX Use this function to adjust the initial volume when the set is switched on Use lt lt gt gt to adjust the desi red initial volume To quit the DSC mode and siore the set ting e Press DSC CD changer control option This car radio allows it to remote control one Selecting a CD track using the To stop the scan of the following Blaupunkt CD changers rocker switch e Press PS briefly The radio will continue CDC A03 F03 A05 FO5 to play the title scanned last e 7 H H Selecting a track upwards Press briefly ro Switching the CD mode on CUE tast advarice audible MIX 2 using SRC of the car radio Press and hold down Use this function for playing the CD tracks at random MIX CD The tracks of the selected CD Saiscrdiec are played at random The fol upwards lowing CDs are selected in nu meric order Their tracks will also be played at random MIX MAG All tracks of the CD magazine Be sure that a CD magazine is inserted in the changer Use the SRC button to change the audio source radio changer cassette Select disc Press SRC until the changer functions ap downwards J pear in the display First CD ON is d
34. the function is active BLS appears in the display Listening to the radio during fast winding with RM Radio Monitor When the tape is fast forwarded or rewound also with CPS SCAN BLS the radio is normally muted To listen to the radio during fast winding e Press RM RM lights up in the display Care of your audio equipment We recommend that you use only C 60 C 90 cassette tapes in your car radio Store your cassettes in a cool place away from dirt dust and temperatures exceeding 50 C During cold weather allow very cold cassettes to warm up before playing them in order to avoid uneven tape transport Operating pro blems and sound distortions may occur after approximately 100 hours of playing time and are caused by dust particles which adhere to the rubber roller and the audio head Use acleaner cassette to remove normal dirt build up For tougher cases use a cotton swab Q tip soaked with alcohol Do not attempt to clean the mechanism by inserting a hard object into the player 43 ENGLISH DSC programming Using DSC Direct Software Control you can adjust certain settings and functions for this car radio to your own liking and then store them The basic settings for this audio equipment have been made at the factory Please refer to the following overview for these settings so that you can always reset to these if desired If you wish to alter any of the programming e press button DSC
35. to Directio nal Antenna The 2 fold ADA system developed by Blau punkt incorporates two tuners Codem IV concept and sets new standards in recepti on quality which is clearly superior to other systems With ADA the set simultaneously analyses and processes the signals furnished by two antennas Compared to traditional concepts this leads to a considerable improvement in the radio reception quality Also multipath interference effects produ ced by hills or buildings are minimised to an extent unparalleled so far ADA on off antenna test You can switch off ADA and test the anten nas For more information read through chapter DSC programming ADA RDS Radio Data System The Radio Data System offers you more convenience when listening to FM More and more radio stations have begun to broadcast additional RDS information a longside their programs As soon as a radio program has been identi fied the station name including a regional identifier if applicable will appear in the display for example NDR1 NDS local ra dio program of Lower Saxony Germany With RDS the preset buttons become pro gram buttons Now you know exactly which program you have tuned into and in future you can select this program directly But RDS even offers you more advantages AF Alternative Frequency The AF function makes sure thatthe radio will always tune into the optimum frequency for the RDS station you are l
36. ton to switch between the memory banks I Il and T Travelstore As soon as this button is pressed the system will automatically switch to FM Extra function Store the six most powerful stations automatically with Travelstore Press FMT until seek tuning starts in the display 4 MeL To change between medium wave MW and long wave LW frequencies dB for instantly changing the volume Press the dB button to instantly mute the audio source The display will then show MUTE Return to normal volume by pressing either the dB or the VOL button When pressing VOL the normal play back volume is identical to the dB mu ted volume To program the mute volume proceed as follows Adjust the desired volume e Press dB for approximately 2 se conds beep tone is released This volume will then be stored as the mute volume Extra function Press this button to store the values set in the DSC menu 27 ENGLISH 6 Rocker switch Radio operation Station search down in short intervals when AF is off up in short intervals when AF is off Tape operation CPS Select title in forwards direction Fast I rewind i Fast forward CPS Select title in backwards direction 28 To stop the function Press the opposite button A V or lt lt gt gt Changer operation Selecting a track upwards Press briefly CUE fast advance audible Press an
37. trength This feature is espe cially useful when travelling because it will always give you the most powerful stations at a finger tip as you pass through the various reception areas e Press FMT for approximately 2 sec The radio will search for the six most powerful FM stations and store them on the T memo ry bank Travelstore When this process has been completed the radio will tune in the strongest station FM stations can also be stored manually on the Travelstore memory bank see Storing stations Recalling stored stations You can recall any stored station by pressing the corresponding preset button e Press FMT or MeL to select the wave band For FM also choose the corre sponding memory bank by pressing FMT until the desired bank is indicated in the display Briefly press the corresponding preset button Preset scanning You can have all of the stations stored in one waveband scanned by using the Preset Scan function Choose the desired SCANTIME in the DSC menu Briefly press PS All of the stations in that waveband will be scanned one after another Depending on which memory bank has been activated for FM all of the stations in either l Il or the Travelstore level will be scanned If a preset is not in use it is skipped To stop the scan Press the PS button once again The radio will continue to play the cur rently scanned station 35 ENGLISH Scanning stations with Radio
Download Pdf Manuals
Related Search