Black & Decker Power Series 90515795 Instruction Manual
Contents
1. SL102B ManualEN_051007 qxp 5 10 07 1 V 1 MILLION POWER SERIES SPOTLIGHT INSTRUCTION MANUAL SB US Catalog Number L102B Thank you for choosing Black amp Decker Go to www BlackandDecker com NewOwner to register your new product BEFORE RETURNING THIS PRODUCT FOR ANY REASON PLEASE CALL 1 800 544 6986 BEFORE YOU CALL HAVE THE CATALOG No AND DATE CODE AVAILABLE IN MOST CASES A BLACK amp DECKER REPRESENTATIVE CAN RESOLVE THE PROBLEM OVER THE PHONE IF YOU HAVE A SUGGESTION OR COMMENT GIVE US A CALL YOUR FEEDBACK IS VITAL TO BLACK amp DECKER TO REDUCE THE RISK OF INJURY THE USER MUST READ AND UNDERSTAND THE INSTRUCTION MANUAL SAVE THIS MANUAL FOR FUTURE REFERENCE Cat SL102B Form 90515795 April 07 Copyright 2007 Black amp Decker Printed in China SL102B ManualEN_051007 qxp 5 10 07 1 A GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS A WARNING Read all instructions before operating product Failure to follow all instructions listed below may result in electric shock fire and or serious injury AVOID DANGEROUS ENVIRONMENTS Don t use appliances in damp or wet locations Don t use appliances the rain KEEP CHILDREN AWAY All visitors should be kept at a distance from work area STORE IDLE APPLIANCES INDOORS When not in use appliances should be stored indoors in dry and high or locked up place2. coiled and unbroken the bulb is not blown If bulb is blown replace it 3 The battery may be completely discharged Charge the unit following the directions on page 3 4 If the Spotlight does not operate after recharging as directed contact Technical Support toll free at 1 800 544 6986 For assistance with your product visit our website www blackanddecker com for the location of the service center nearest you or call the BLACK amp DECKER help line at 1 800 544 6986 Accessories Recommended accessories for use with your tool are available from your local dealer or authorized service center If you need assistance regarding accessories please call 1 800 544 6986 A WARNING The use of any accessory not recommended for use with this tool could be hazardous SERVICE INFORMATION All Black amp Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service Whether you need technical advice repair or genuine factory replacement parts contact the Black amp Decker location nearest you To find your local service location refer to the yellow page directory under Tools Electric or call 1 800 544 6986 or visit www blackanddecker com FULL TWO YEAR HOME USE WARRANTY Black amp Decker U S Inc warrants this product for two years against any defects in material or workmanship The defective product will be replaced or repaired at no charge in either of two way
3. hour AC Charger UL Listed Class 2 12 volt DC 300 mA DC Plug Fuse 0 5A 250 V Imported by Black amp Decker U S Inc 701 E Joppa Rd aie Yellow Pages Towson MD 21286 U S A for Service amp Sales Vector Products Inc 4140 S W 30th Ave Fort Lauderdale FL 33312
4. out of reach of children DON T FORCE APPLIANCE It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed USE RIGHT APPLIANCE Do not use the appliance for any job except that for which it is intended DRESS PROPERLY Do not wear loose clothing or jewelry They can be caught in moving parts Rubber gloves and substantial non skid footwear are recommended when working outdoors Wear protective hair covering to contain long hair USE SAFETY GLASSES AND OTHER SAFETY EQUIPMENT Use safety goggles or safety glasses with side shields complying with applicable safety standards and when needed a face shield Also use face or dust mask if operation is dusty This applies to all persons in the work area Also use a hard hat hearing protection gloves safety shoes and dust collection systems when specified or required Safety glasses or the like are available at extra cost at your local dealer or Black amp Decker Service Center DON T ABUSE CORD Never carry appliance by cord or yank it to disconnect from receptacle Keep cord from heat oil and sharp edges DON T OVERREACH Keep proper footing and balance at all times DISCONNECT APPLIANCES Disconnect the appliance from the power supply when not in use before servicing and when changing accessories such as blades and the like AVOID UNINTENTIONAL STARTING Don t carry plugged in appliance with finger on switch Be s
5. volt 55 watt only Battery Replacement Disposal Battery Replacement The battery should last the service life of the unit Contact Technical Support toll free at 1 800 544 6986 for any information you may need Safe Battery Disposal Contains a maintenance free sealed non spillable lead acid battery which must be disposed of properly Recycling is required contact your local authority for information Failure to comply with local state and federal regulations can result in fines or imprisonment A WARNINGS Do not dispose of the battery in fire as this may result in an explosion Before disposing of the battery protect exposed terminals with heavy duty electrical tape to prevent shorting shorting can result in injury or fire Do not expose battery to fire or intense heat as it may explode For more information on recycling this battery call toll free 877 288 7722 5 2 SL102B ManualEN_051007 qxp 5 10 07 6 TROUBLESHOOTING The Battery Status Indicator LED Does Not Light When Charging 1 Check connection to the 120 Volt AC Charger or 12 Volt DC Charging Port 2 Check connection to AC or DC power source 3 Confirm there is a functioning AC or DC current Unit Will Not Operate 1 The Spotlight will not operate when charging Be sure all adapters are disconnected before Spotlight use 2 If you suspect the bulb is blown check the filament If the filament is
6. 051007 qxp 5 10 07 5 1 Disconnect the unit from any charging adapters Push the rubber bezel forward toward the front of the spotlight to reveal two small Phillips screws in the retaining ring Using the screwdriver remove counterclockwise the two screws Set them aside Lift off the retaining ring glass lens and rubber O ring and set them aside Carefully remove the reflector and bulb assembly HAIRPIN RETAINING i _ N WIRES BULB REFLECTOR D Disconnect the bulb wire from the red power wire Unsnap the hairpin retaining wires from the reflector s flange Using the screwdriver loosen the retaining screw to remove the bulb from the reflector no need to completely remove this screw Lift out the bulb and detach wire 10 Insert the replacement bulb into the reflector s flange 11 Put back and secure the hairpin retaining wires 12 Connect the bulb power wire to the red power wire 13 Tighten the retaining screw on the flange 14 Place the reflector in position in the body of the spotlight 15 Replace the rubber O ring in the groove around the perimeter of the reflector 16 Replace glass and retaining ring so the screw holes are aligned 17 Secure retaining ring with two screws 18 Replace rubber bezel 19 Operate switch to ensure proper operation of spotlight A WARNING To reduce the risk of electric shock replace bulb with 6
7. RGING PORT SIMULTANEOUSLY OPERATING INSTRUCTIONS To turn the Spotlight ON depress the Trigger To lock the Trigger in the ON position depress the Trigger then slide the Trigger Lock up The spotlight will stay on until the TRIGGER lock is moved to the OFF position and the trigger is TRIGGER LOCK CARE AND MAINTENANCE All batteries lose charge with time especially when they are warm Recharge the unit every two months when not in frequent use preferably using the 120 volt AC method Never submerge the unit in water If the unit gets dirty gently clean the outer surfaces of the spotlight unit with a soft cloth moistened with a mild solution of water and detergent The quartz halogen bulb is the only user replaceable part in the Spotlight Periodically inspect the condition of adapters connectors and wires Contact Technical Support toll free at 1 800 544 6986 to replace any components that have become worn or broken Spotlight Bulb Replacement To replace the bulb you will need a small Phillips screwdriver and a 6 volt H3 55 watt replacement bulb During installation avoid touching the glass part of the bulb Bulb life may be shortened by installing a bulb with dirt or fingerprints on it The bulb can be wiped clean with a cloth moistened with alcohol QUARTZ HALOGEN BULB TRIGGER SWITCH REFLECTOR TRIGGER LOCK RUBBER RETAINING RING 0 RING RUBBER BEZEL COVER 4 2 SL102B ManualEN_
8. ded for use outdoors and so marked Minimum Gage for Cord Sets Volts Total Length of Cord in Feet 120V 0 25 51 100 101 150 26 50 0 7 6m 7 6 15 2m 15 2 30 4m 30 4 45 7m 240V 0 50 51 100 101 200 201 300 0 15 2m 15 2 30 4 30 4 60 9 60 9 91 4 Ampere Rating Not more American Wire Gage Than 6 10 12 4 12 16 Not Recommended SL102B ManualEN_051007 qxp 5 10 07 2 EXTENSION CORDS Make sure your extension cord is in good condition When using an extension cord be sure to use one heavy enough to carry the current your product will draw An undersized cord will cause a drop in line voltage resulting in loss of power and overheating The following table shows the correct size to use depending on cord length and nameplate ampere rating If in doubt use the next heavier gage The smaller the gage number the heavier the cord SAFETY GUIDELINES DEFINITIONS A DANGER Indicates an imminently hazardous situation which if not avoided will result in death or serious injury A WARNING Indicates a potentially hazardous situation which if not avoided could result in death or serious injury A CAUTION Indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION Used without the safety alert symbol indicates potentially hazardous situation which if not avoided may result in property damage RISK OF UNSAFE OPERATION When using tools or equ
9. g rather than cord when disconnecting from the 120 Volt AC Charger Do not attempt to charge the unit if the 120 Volt AC Charger plug is damaged return the unit to manufacturer for repair INTRODUCTION Thank you for choosing the Black amp Decker V 1 Million Power Series Spotlight Please read this guide carefully before use to ensure optimum performance and to avoid damage to the unit FEATURES Powerful focused quartz halogen beam Protective rubber safety guard bezel around lens Rubber safety cap protects battery compartment Comfortable pistol grip Battery Status LED Indicator UL listed built in 120 volt AC charger that works with a standard household extension cord not included 12 volt DC charging adapter included Rechargeable non spillable sealed lead acid battery RUBBER BEZEL BATTERY LED INDICATO 120 VOLT AC CHARGER BACK OF UNIT QUARTZ HALOGEN BULB DC CHARGING ORT TRIGGER ON OFF TRIGGER LOCK PISTOL GRIP HANDLE CHARGING RECHARGING THE SPOTLIGHT This unit is shipped in a partially charged state Charge unit BEFORE first use using the 120 Volt AC Charger for 12 14 hours or until the red Battery Status LED flashes Charge after each use until red LED flashes Charging Recharging Using the 120 Volt AC Charger and a Standard Household Extension Cord not included Plug a standard North American 120 volt AC extension cord not included int
10. ipment basic safety precautions should always be followed to reduce the risk of personal injury Improper operation maintenance or modification of tools or equipment could result in serious injury and property damage There are certain applications for which tools and equipment are designed Black amp Decker strongly recommends that this product NOT be modified and or used for any application other than for which it was designed Read and understand all warnings and operating instructions before using any tool or equipment SAVE THESE INSTRUCTIONS THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE V 1 MILLION POWER SERIES SPOTLIGHT MODEL SL102B A WARNING TO REDUCE THE RISK OF INJURY Follow these instructions and those published by the manufacturer of any equipment you intend to use with this unit Review cautionary markings on these products IMPORTANT SAFETY INSTRUCTIONS WARNING This product or its power cord contains lead a chemical known to the State of California to cause cancer and birth defect or other reproductive harm Wash hands after handling A WARNING TO REDUCE THE RISK OF ELECTRIC SHOCK Do not plug in a power supply without the bulb lens and cover in place A WARNING FIRE HAZARD Never contact combustible material to the lens and never tape or tie the switch in the on position A CAUTION TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE All halogen lights give off heat Do no
11. o the 120 Volt AC Charger on the back of the unit BATTERY STATUS LED INDICATOR BUILT IN 120V AC CHARGER Make sure the Spotlight is OFF the Trigger Lock is in the OFF position and the Trigger is not depressed 3 SL102B ManualEN_051007 qxp 5 10 07 4 Charge until the Battery Status LED Indicator red LED flashes approximately 12 14 hours DO NOT CHARGE FOR LONGER THAN 14 HOURS Charging Recharging Using the 12 Volt DC Charging Adapter Plug the barrel tip of the supplied 12 Volt DC Charging Adapter into the 12 Volt DC Charging Port 12 VOLT DC CHARGING PORT 12 VOLT DC CHARGING ADAPTER Insert the 12 volt DC plug end into the accessory outlet of your vehicle or other 12 volt DC power source Make sure the Spotlight is OFF the Trigger Lock is in the OFF position and the Trigger is not depressed Charge until the Battery Status LED Indicator red LED flashes approximately 12 14 hours DO NOT CHARGE FOR LONGER THAN 14 HOURS Make sure the DC source jump starter battery pack vehicle accessory outlet etc is 12 volt DC and is able to supply at least one half amp at 12 volt DC for 8 hours This means a battery pack should be charged with at least 4 amp hours capacity Note When using a vehicle s 12 volt DC accessory outlet as a charging source be aware that some vehicles require you to turn on the ignition to power the accessory outlet A WARNING NEVER ATTEMPT TO USE THE AC CHARGER AND DC CHA
12. s The first which will result in exchanges only is to return the product to the retailer from whom it was purchased provided that the store is a participating retailer Returns should be made within the time period of the retailer s policy for exchanges usually 30 to 90 days after the sale Proof of purchase may be required Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges The second option is to take or send the product prepaid to a Black amp Decker owned or authorized Service Center for repair or replacement at our option Proof of purchase may be required Black amp Decker owned and authorized Service Centers are listed under Tools Electric in the yellow pages of the phone directory and on our website www blackanddecker com This warranty does not apply to accessories This warranty gives you specific legal rights and you may have other rights which vary from state to state or province to province Should you have any questions contact the manager of your nearest Black amp Decker Service Center This product is not intended for commercial use FREE WARNING LABEL REPLACEMENT If your warning labels become illegible or are missing call 1 800 544 6986 for a free replacement SL102B ManualEN_051007 qxp 5 10 07 7 SPECIFICATIONS Spotlight Bulb 6 volt H3 series 55 watt Battery Maintenance free sealed lead acid 6 volt 3 amp
13. t touch lens while operating Keep combustibles away from spotlight lens Extreme heat can cause fires Never place the light face down on any surface when lit e Never look directly into the light or shine the light into another person s eyes e Keep sharp objects away from lens it is glass and can break Do not immerse spotlight in water Do not drop or throw spotlight It contains glass and a sealed lead acid battery Only replace bulb with type indicated in specifications 6 volt 55 watt quartz halogen Use only with AC or DC charging adapters that are provided with unit Plug in the charging adapter at the spotlight first then plug into the charging source Do not overcharge AC recharge up to 14 hours maximum DC recharge up to 14 hours maximum NEVER ATTEMPT TO USE THE AC CHARGER AND DC CHARGING PORT SIMULTANEOUSLY After charging recharging disconnect charging adapter or extension cord and wait 5 minutes before use Do not crush cut pull or expose charging adapter cords to extreme heat 2 2 SL102B ManualEN_051007 qxp 5 10 07 3 Position charging adapter cords so they do not become entangled or become a safety hazard Keep charging adapter cords away from sharp edges e Use in a dry location only Do not open body casing There no user serviceable parts inside To reduce risk of damage to electric plug and cord pull by plu
14. ure switch is off when plugging in GROUND FAULT CIRCUIT INTERRUPTER GFCI protection should be provided on the circuits or outlets to be used Receptacles are available having built protection and may be used for this measure of safety USE OF ACCESSORIES AND ATTACHMENTS The use of any accessory or attachment not recommended for use with this appliance could be hazardous Note Refer to the accessory section of this manual for further details STAY ALERT Watch what you are doing Use common sense Do not operate tool when you are tired CHECK DAMAGED PARTS Before further use of the tool a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function Check for alignment of moving parts binding of moving parts breakage of parts mounting and any other conditions that may affect its operation A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual Have defective switches replaced by authorized service center Do not use tool if switch does not turn it on and off DO NOT OPERATE portable electric tools near flammable liquids or in gaseous or explosive atmospheres Motors in these tools normally spark and the sparks might ignite fumes OUTDOOR USE EXTENSION CORDS When tool is used outdoors use only extension cords inten
Download Pdf Manuals
Related Search