BENDIX TCH-001-021 User's Manual
Contents
1. Technical Bulletin Bulletin No PRO 01 21 Effective Date 5 15 81 Cancels NA Page 1 of 1 Subject COMPRESSOR CRANKSHAFT NUT TORQUE New and remanufactured Bendix compressors are not always furnished with a crankshaft nut Some O E vehicle manufacturers install their own special nut to mount drive components on the compressor crankshaft In these cases we do not furnish a nut with the compressor A nut of this type must be reused when the compressor or drive components are replaced It is important to torque the crankshaft nut properly Regardless of the type of crankshaft nut torque should not exceed 120 foot pounds When installing a castellated nut torque to 90 foot pounds and check for cotter pin alignment If the nut is not aligned with the crankshaft hole incrementally raise the torque to the maximum 120 foot pounds until the crankshaft hole and nut align DO NOT BACK OFF NUT TO ALIGN If the hole and nut cannot be aligned within the 90 to 120 foot pound range a new nut must be used
Download Pdf Manuals
Related Search