BENDIX BW2775 User's Manual
Contents
1. forward collision warning system Bendix BackSpotter Rear Collision Warning System Installation Notes and Kit Contents Formerly L 2005 16 Install Kit Contents e 1 BENDIX BACKSPOTTER ELECTRONICS KIT e 1 LOOM CORRUGATED LCP 500 5 ID 40FT e 1 GROMMET 11 16 ID X 1 5 16 OD e 1 BRACKET MOUNTING SS ROUND CENTER WITH PEMNUTS e 1 LUBRICANT TERMINAL WIRE HARNESS NYOGEL e 5 TUBING HEAT SHRINK ADHESIVE LINED 225 ID X 3 LONG e 5 SOLDER SLEEVE e 5 TERMINAL 16 14 AWG IN LINE SPLICE e 1 HARNESS ASSEMBLY BACKSPOTTER EXTENSION 20FT Installation Notes e It is recommended to protect the Bendix BackSpotter wire harness by covering it with the corrugated loom provided e Route the harness along the existing vehicle harness securing it with wire ties or harness tape not provided e A 20 tt driver display unit extention harness is provided for applications requiring an extended harness 40 ft total harness length Additional harnesses can be purchased separately e Use the Nyogel Terminal Lubricant included to lubricate all harness terminals and connector seals before assembling the connections e Mount sensor using hardware kit supplied e Torque mounting screws 18 22 Ib in DO NOT OVER TORQUE Splicing the Power Connections Terminal splices and heat shrink tubing are provided to make a secure watertight splice into the reverse lamp power wire near the back of the vehicle Refer t2. m BW2775 2010 Bendix Commercial Vehicle Systems LLC a member of the Knorr Bremse Group 5 10 All Rights Reserved
3. o the Bendix BackSpotter Installation and Users Guide BW2768 formerly VODR 0038 included in this kit for complete installation and operation instructions Limitations of Collision Warning Systems The Bendix VORAD BackSpotter is intended solely as an aid for an alert and conscientious professional driver It is not to be used or relied upon to operate a vehicle The system should be used in conjunction with rear view mirrors and other instrumentation to maintain safe operation of the vehicle ground personnel and adjacent property A vehicle equipped with the Bendix VORAD BackSpotter should be operated in the same safe manner as if the system were not installed The system is not a substitute for normal safe driving procedures It will not compensate for any driver impairment such as drugs alcohol or fatigue Should the system become inoperative it could jeopardize the safety or lives of those who depend on the system for safety This drawing and or technical information is the property of Bendix Commercial Vehicle Systems LLC Bendix CVS Bendix CVS claims proprietary rights to the materials disclosed hereon This drawing and or technical information is issued in confidence for engineering information only and may not be reproduced or used to manufacture anything shown or referred to hereon without direct written consent from Bendix CVS to the user 901 Cleveland Street Elyria Ohio 44035 1 800 AIR BRAKE 1 800 247 2725 www bendix co
Download Pdf Manuals
Related Search