Avery MONARCH 9465 User's Manual
Contents
1. OPERATING INSTRUCTIONS The Monarch 9465 Four Station Battery Charger charges from one to four 7 4V lithium ion batteries for the following printers Sierra Sport2 9460 Sierra Sport3 9433 Monarch Pathfinder Ultra Silver 6032 Monarch Pathfinder Ultra Gold 6037 Monarch Pathfinder Ultra Platinum 6039 Note You must charge a battery before using it gt gt gt WARNINGS Use only a Monarch qualified battery The battery could be damaged or explode if placed on a different charger Do not throw the battery in the trash Dispose according to your local regulations Do not disassemble short circuit heat above 80 C or incinerate the battery It may explode Follow the operating and storage limit specifications listed at the end of these instructions Otherwise the battery may permanently lose its charge capacity A AVERY DENNISON TC946501 Rev AE 12 07 2005 Paxar Americas Inc a subsidiary of Avery Dennison Corp All rights reserved Connecting the Power Supply To connect the power supply 1 Plug one end of the power supply into a wall electrical outlet 2 Plug the other end of the power supply into the back of the charger The Power LED is on when the charger is set up and plugged in 2 Operating Instructions Charging a Battery To charge a battery insert the battery into the charger as shown Charging time can take up to three hou2. put 12 VDC 80W max Visit www paxar com for sales service supplies information and telephone numbers for our locations throughout the world Toll Free 1 800 543 6650 In the U S A 1 800 363 7525 In Canada 4 Operating Instructions
3. rs It takes approximately two hours to reach the 80 level where it is now usable To reach 100 it takes approximately one hour more Reading the Display Once the charger is plugged into an electrical outlet the Power LED is on solid There are four charging stations and each has its own set of LEDs D Power 4 Charging Solid Complete a QO mi Flashing Useable 80 Charging LED flashes when you insert the battery is solid while charging and is off when charging is complete Complete LED flashes when the battery is 80 charged and is solid when the battery is 100 charged Operating Instructions 3 Troubleshooting When an error occurs the Charging and Complete LEDs blink together In this case repeat the charging process If the error still occurs repeat the process with a new battery If there is a problem after the second repeat charge call Service In between charges remove the battery wait for the lights to stop flashing then re insert the battery Specifications Operating Limits Temperature 32 F to 104 F 0 C to 40 C Humidity 5 to 90 non condensing Storage Limits Temperature 40 F to 158 F 40 C to 70 C Humidity 5 to 90 non condensing Charger Length 11 8 300 0 mm Width 6 25 158 75 mm Height 2 75 70 0 mm Input 12 to 16 VDC 50W Weight 4 55 Ibs 2 06 kg Power Supply Input Universal switching power supply 85 to 264 VAC 50 60 Hz Out
Download Pdf Manuals
Related Search