Home

Avaya Managing Routers HTTP Server User's Manual

1. For example the following command allows the use of the domain name myrouter http domain name myrouter Go to Starting and Configuring the HTTP Server 300019 B Rev 00 1 7 Managing Routers Using the HTTP Server Using Site Manager To configure or change the HTTP Server parameters first create HTTP on the router then complete the following tasks Site Manager Procedure You do this System responds al In the Configuration Manager window choose Protocols gt Global Protocols gt HTTP gt Global The Edit HTTP Global Parameters window opens Set the Enable Disable parameter to Enabled to enable the HTTP Server or to Disabled to disable the HTTP Server Specify the Port number on which you enabled the HTTP Server Set the Authentication parameter to Basic or Digest Specify the Domain Name to use for the router To use the IP address instead of a domain name leave this parameter value blank Click on OK You return to the Configuration Manager window Go to Starting and Configuring the HTTP Server 300019 B Rev 00 Chapter 2 HTTP Server Concepts HTTP Server software lets you access device information from anywhere in the network using any standard Web browser that conforms to HTTP and HTML specifications The HTTP Server is part of the router operating system for all Bay Networks non VME based GAME routers This chapter provid
2. Managing Routers Using the HTTP Server BayRS Version 13 10 Site Manager Software Version 7 10 Part No 300019 B Rev 00 November 1998 Bay Networks Where Information Flows Bay Networks Where Information Flows 4401 Great America Parkway 8 Federal Street Santa Clara CA 95054 Billerica MA 01821 Copyright 1998 Bay Networks Inc All rights reserved Printed in the USA November 1998 The information in this document is subject to change without notice The statements configurations technical data and recommendations in this document are believed to be accurate and reliable but are presented without express or implied warranty Users must take full responsibility for their applications of any products specified in this document The information in this document is proprietary to Bay Networks Inc The software described in this document is furnished under a license agreement and may only be used in accordance with the terms of that license A summary of the Software License is included in this document Trademarks AN BCN BLN BN and Bay Networks are registered trademarks and BayRS BCC and the Bay Networks logo are trademarks of Bay Networks Inc Internet Explorer Microsoft MS MS DOS Win32 Windows and Windows NT are registered trademarks of Microsoft Corporation All other trademarks and registered trademarks are the property of their respective owners Restricted Rights Legend Use duplication or
3. help getting 3 1 HSSI port statistics 6 4 HTTP authentication configured 5 3 HTTP configuration statistics 5 3 HTTP counters 5 3 HTTP domain name 5 3 HTTP parameters customizing BCC 1 7 Site Manager 1 8 HTTP port 5 3 HTTP request statistics 5 4 HTTP requests 5 5 http requests B 4 HTTP response statistics 5 4 HTTP responses 5 5 http responses show command B 4 HTTP Server concepts 2 1 starting 1 1 starting and configuring 1 1 statistics 5 3 HTTP server configuration statistics 5 6 HTTP Site Manaager parameter Enable Disable A 2 HTTP Site Manager parameter Authentication A 3 Domain Name A 3 HTTP state 5 3 Index 2 HTTP statistics 5 2 viewing 5 5 HTTP status 5 3 HTTP summary statistics 5 6 http summary show command B 3 httpreq dat 5 5 httpresp dat 5 5 httpsrv dat 5 6 httpsum dat 5 6 ICMP statistics 7 2 icon Circuit Alert 4 2 Events 4 2 Hardware 3 3 Info 3 3 support folder 2 2 tasks 3 3 in last time HTTP statistic 5 4 info event meaning 4 3 Info icon 3 3 install bat script 1 2 IP access control filter 1 6 IP address replacing with domain name 1 6 IP statistics 7 2 IPX statistics 7 2 J Java applets 1 1 Max Cache Age seconds parameter A 3 Max Cache Count parameter A 3 method HTTP statistic 5 4 modifying HTTP parameters 1 7 monitoring 4 1 monitoring device operation 3 1 300019 B Rev 00 N network address filtering 1 6
4. support contracts or information about educational services go to the following URL http www baynetworks com corporate contacts Or telephone the Bay Networks Technical Solutions Center at 800 2LANWAN 300019 B Rev 00 xiii Managing Routers Using the HTTP Server xiv 300019 B Rev 00 Chapter 1 Starting and Configuring the HTTP Server The Bay Networks HTTP Server is an embedded Web based router management tool included with the Bay Networks router operating system software and accessible from any standard Web browser Using HTTP Server software you can monitor network devices viewing summary fault and statistical information on a device by device basis Before you can use the HTTP Server to monitor a router you must configure and enable the HTTP Server software on the router using the Quick Start installation script install bat the Bay Command Console BCC or Site Manager Browser Requirements Starting the HTTP Server Using install bat Starting the HTTP Server Using the BCC Starting the HTTP Server Using Site Manager Setting HTTP Server Security Go to Starting and Configuring the HTTP Server Browser Requirements Your Web browser must support frames Java applets and cascading style sheets for example Netscape 4 0 or higher and Microsoft Internet Explorer 4 0 or higher If you have changed the default settings for these browsers you must ensure that Java is enabled If
5. 1 4 state HTTP 5 3 statistics AppleTalk 7 3 Ethernet port 6 2 FDDI port 6 3 HSSI port 6 4 HTTP 5 3 Index 3 HTTP configuration 5 3 HTTP request 5 4 HTTP requests 5 5 HTTP response 5 4 HTTP responses 5 5 HTTP server configuration 5 6 HTTP summary 5 6 ICMP 7 2 IP 7 2 IPX 7 2 port 6 1 router protocol 7 1 serial port 6 3 token ring portport statistics token ring 6 4 traffic all ports 6 2 viewing 5 1 Statistics Launch Facility 5 5 Statistics Manager 5 1 5 3 5 4 statistics available 5 1 status of a port changing 7 1 status HTTP 5 3 status HTTP statistic 5 4 summary http show command B 3 system status 3 2 summary statistics 5 6 support folder icon 2 2 support Bay Networks xii system status summary 3 2 T Tasks icon 3 3 TCP statistics 5 2 technical publications xi technical support xii Telnet statistics 5 2 text conventions x TFTP statistics 5 2 time outs HTTP statistic 5 4 token ring port statistics 6 4 Index 4 total in unknowns HTTP statistic 5 3 total in HTTP statistic 5 4 total out HTTP statistic 5 4 total request discards HTTP statistic 5 3 total request errors HTTP statistic 5 3 total requests received HTTP statistic 5 3 total responses HTTP statistic 5 3 total rx octets HTTP statistic 5 4 total time outs HTTP statistic 5 4 total tx octets HTTP statistic 5 4 trace event meaning 4 3 traffic stat
6. 4 300019 B Rev 00 A access control filtering 1 6 acronyms Xi administrative status of a port changing 7 1 alert circuit 4 2 AppleTalk statistics 7 3 authentication basic 1 5 configured 5 3 digest 1 6 Authentication parameter A 3 basic access authentication 1 5 BCC show command B 1 BCC using to start the HTTP Server 1 3 BootP statistics 5 2 browser requirements 1 1 C cascading style sheets 1 1 changing HTTP parameters 1 7 circuit Alert 4 1 circuit alert displaying 4 2 configuration files initial 1 2 configuration statistics HTTP 5 3 conventions text x counters HTTP 5 3 customizing HTTP parameters 1 7 300019 B Rev 00 Index D debug event meaning 4 3 device monitoring 3 1 digest authentication 1 6 DNS 1 6 Domain A 3 domain name configured 5 3 domain name instead of IP address 1 6 Domain Name parameter 1 6 A 3 E Edit HTTP Global Parameters window A 2 educational services xii Enable Disable parameter A 2 enabling HTTP Server 1 1 Ethernet port statistics 6 2 event 4 1 viewing 4 2 event log filtering 4 3 interpreting 4 3 severity levels 4 3 Events icon 4 2 F fault event meaning 4 3 FDDI port statistics 6 3 filtering the event log 4 3 flash memory card 1 2 Index 1 folder icon 2 2 frames 1 1 FTP statistics 5 2 G GAME 2 1 getting help 3 1 H hardware icon 3 3 help for show commands B 2
7. Monitoring Routers Using the HTTP Server This chapter describes how to use the HTTP Server to monitor the operation of individual routers on your network For specific descriptions of how to use the information from the HTTP Web Server to troubleshoot the devices in your network refer to Troubleshooting Routers Getting Help Specifying a Router to Monitor Viewing Overall System Status Info Hardware PROMs Software Resources Tasks Getting Help For this information Click on Support then on HTTP Server interface help Help icon Release Notes Release Notes icon Bay Networks documentation Documentation icon Bay Networks technical support Bay Networks Technical Solutions Center icon After opening one of these links choose File gt Close to return to the HTTP Server page on the Web browser Clicking on File gt Exit shuts down the browser The Back button may not be available on linked pages 300019 B Rev 00 3 1 Managing Routers Using the HTTP Server Go to Monitoring Routers Using the HTTP Server Specifying a Router to Monitor 1 Start your Web browser 2 In the Location field enter http lt router_IP_address gt router_IP_address is an IP address on the device that you want to monitor for example hitp 192 168 12 54 The browser displays a summary window for the specified device Go to Monitoring Routers Using the HTTP Server Viewing Overall S
8. O online help for show commands B 2 out last time HTTP statistic 5 4 P parameters Site Manager A 1 Port parameter A 2 port statistics 6 1 Ethernet 6 2 FDDI port 6 3 HSSI 6 4 serial 6 3 traffic all 6 2 port status changing 7 1 port HTTP 5 3 port troubleshooting 6 2 7 2 product support xii protocol statistics 7 1 publications Bay Networks xi Q Quick Start procedure 1 2 R received rx octets HTTP statistic 5 4 request discards HTTP statistic 5 3 request errors HTTP statistic 5 3 request statistics 5 5 requests received HTTP statistic 5 3 requests show B 4 requirements browser 1 1 response status code 5 4 response statistics 5 5 300019 B Rev 00 responses HTTP statistic 5 3 show command B 4 router specifying 3 2 router monitoring 3 1 router protocol statistics 7 1 router statistics 5 1 S security setting 1 4 serial port statistics 6 3 server configuration statistics 5 6 severity levels events 4 3 show command BCC B 1 show commands command syntax B 2 config B 2 online Help for B 3 show commands help B 2 show http requests B 4 show http responses command B 4 show http summary command B 3 Site Manager parameter descriptions A 1 Statistics Manager 5 4 using to start the HTTP Server 1 4 1 8 SNMP statistics 5 2 specifying a router to monitor 3 2 start time HTTP statistic 5 4 starting HTTP Server 1 1 BCC 1 3 Site Manager
9. disclosure by the United States Government is subject to restrictions as set forth in subparagraph c 1 ii of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 Notwithstanding any other license agreement that may pertain to or accompany the delivery of this computer software the rights of the United States Government regarding its use reproduction and disclosure are as set forth in the Commercial Computer Software Restricted Rights clause at FAR 52 227 19 Statement of Conditions In the interest of improving internal design operational function and or reliability Bay Networks Inc reserves the right to make changes to the products described in this document without notice Bay Networks Inc does not assume any liability that may occur due to the use or application of the product s or circuit layout s described herein Portions of the code in this software product may be Copyright 1988 Regents of the University of California All rights reserved Redistribution and use in source and binary forms of such portions are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation advertising materials and other materials related to such distribution and use acknowledge that such portions of the software were developed by the University of California Berkeley The name of the University may not be used to endorse or promote products de
10. ee ties atacand mS HIPO onioumnion Stasies arsana NONA 5 3 POCIE C RN eS sas sacs on i A A Nua Mutindes 5 3 HTTP SS SSCS creion aea aE EAE ES 5 4 HTTP Responses SSeS Ss unnu a aa Using the Statistics Manager to View HTTP Sara Statistics ere oe Peper meneame 5 4 Selecing Me Windows t DMG AY es cstp tinea cect sccentaelecncnetin cctcasdepbaccueednectdesthpassteeieet 5 5 Starting the Statisties Launch Facility soa co assascentissiscentssentanegncendeeaneestanuedeatiedaeccua 5 5 Viewing HTTP Statistics G PR E EE E E TEP aii aein D Chapter 6 Viewing Router Port Statistics Changing the Administrative Status of a Port 0 PAAT i T oent eee 6 2 Viewing Fafe Statisties ior Al POIS acces esta cecccccrcateee te ccrenhieta tcp eaa a E 6 2 Viewing Ethernet Port StatisShieS sasise oiaoi anii 6 2 Viewing Serial Port Statistics PEE EE E eet endi pornu 6 3 yivin FUG Port Sta SE E aiaa AN A A AA 6 3 vonna Poal FON SISIE S ariaa E ASNE EENE a EANNA 6 4 Viewing Token Ring Port StanelicS nies sesceadeccctse tates ai a aa a S 6 4 Chapter 7 Viewing Router Protocol Statistics Changing the Administrative Status of a Port a e P P P 7 1 Se IP SSNS ain ee E oe RETA SU OS isch ze cies cians rasa vd sen N A apna E A danas Sak casa nasa 7 2 Viewing AppleTalk SISUGUCS feccectaccccae ts aictueds ccccasieroncteatgesevahe dataset deneetiellatiandes 7 3 vi 300019 B Rev 00 Appendix A Site Manager Parameters Site Manager PANAMGIONS ccssccdsacc cot
11. you configure digest authentication your browser must be enabled for this capability otherwise authentication reverts to basic Caution Internet Explorer lets you store your browser password For security reasons it is wise not to store your password 300019 B Rev 00 11 Managing Routers Using the HTTP Server Go to Starting and Configuring the HTTP Server Starting the HTTP Server Using install bat A new router comes with a flash memory card containing the software image for the router two configuration files config and ti cfg and the Quick Start script install bat The Quick Start installation script creates an initial IP network interface on the router so that your router can communicate with the configuration workstation from which you will manage the router The install bat script prompts you to enter the network information that dynamically configures the initial IP interface As the following example shows the script asks whether you want to enable HTTP Answer yes to this question The default is no Step 7 Enable HTTP Enable the HTTP Web Server Do you want to enable the HTTP Web server y n n y HTTP server enabled Note For complete instructions on running the install bat script and verifying that the installation is successful see Quick Starting Routers When you enable the HTTP Server during the Quick Start procedure you can use the HTTP Server with its d
12. 300019 B Rev 00 7 1 Managing Routers Using the HTTP Server The Enabled column displays the administrative setting but it is not a clickable link The State column shows the operational state of the interface up or down If the Enabled column shows that the interface is enabled but the State column shows that the interface is down there is a problem with the interface Viewing IP Statistics Clicking on Statistics gt Protocols gt IP in the navigational frame reveals the following subordinate links Global Traffic Interfaces Routes ARP Cache RIP and ICMP To see these statistics Use this path Global Statistics gt Protocols gt IP gt Global Traffic Statistics gt Protocols gt IP gt Traffic Interfaces Statistics gt Protocols gt IP gt Interfaces Routes Statistics gt Protocols gt IP gt Routes ARP Cache Statistics gt Protocols gt IP gt ARP Cache RIP Statistics gt Protocols gt IP gt RIP ICMP Statistics gt Protocols gt IP gt ICMP This reveals the following subordinate links Counters Received and Transmitted e Counters Statistics gt Protocols gt IP gt ICMP gt Counters Received Statistics gt Protocols gt IP gt ICMP gt Received e Transmitted Statistics gt Protocols gt IP gt ICMP gt Transmitted Viewing IPX Statistics Clicking on Statistics gt Protocols gt IPX in the navigational frame reveals the following subord
13. Command Output e Online Help for show Commands e Show Commands for the HTTP Server e show http summary e show http requests e show http responses 300019 B Rev 00 B 1 Managing Routers Using the HTTP Server Sample show Command Output The show command displays summary information about the HTTP Server on the router For example if you enter the command bcc gt show http requests You see this type of output show http requests Sep 21 1998 11 48 04 EDT Method Total In In Last Time get 186 Sep 21 1998 14 20 57 GMT 5 head 0 trace 0 post 0 options 0 put 0 delete 0 Online Help for show Commands You can display a list of available command options by entering show or show lt option gt without additional options or with a question mark as an option For example entering show or show http at the BCC prompt displays the list of all show or show http keyword subcommand options B 2 300019 B Rev 00 Show Commands for the HTTP Server Show Commands for the HTTP Server The show http or show http command lists the keywords also called subcommands available with this command These keywords are e summary e requests h responses The show http lt keyword gt command displays information about the HTTP Server activity on the router The HTTP Server show http commands have no command arguments filter flags or filter arguments The router shows information for all appl
14. Port Statistics Clicking on Statistics gt Ports displays the following folders in the navigational frame e Summary e Ethernet e Serial FDDI e HSSI e Token Ring To get statistical information about any port type click on the appropriate link Each port type folder contains links to summary statistics traffic number of packets transmitted and received statistics receive error statistics and transmit error statistics All but Ethernet also display system error statistics The following sections summarize these displays Changing the Administrative Status of a Port Viewing Traffic Statistics for All Ports Viewing Ethernet Port Statistics Viewing Serial Port Statistics Viewing FDDI Port Statistics Viewing HSSI Port Statistics Viewing Token Ring Port Statistics 300019 B Rev 00 6 1 Managing Routers Using the HTTP Server Changing the Administrative Status of a Port A user who has Manager level access privileges can click on the first column of the table in the summary statistics window for any port type to enable or disable that is change the administrative setting of the port Caution If you disable the interface through which your Web browser is communicating with a router you will no longer be able to monitor that router s operation with the HTTP Server The Enabled column displays the administrative setting but it is not a clickable link The State column shows the operat
15. SAP Service Advertising Protocol SMDS Switched Multimegabit Data Service SNMP Simple Network Management Protocol TCP Transaction Control Protocol Bay Networks Technical Publications You can now print Bay Networks technical manuals and release notes free directly from the Internet Go to support baynetworks com library tpubs Find the Bay Networks product for which you need documentation Then locate the specific category and model or version for your hardware or software product Using Adobe Acrobat Reader you can open the manuals and release notes search for the sections you need and print them on most standard printers You can download Acrobat Reader free from the Adobe Systems Web site www adobe com You can purchase Bay Networks documentation sets CDs and selected technical publications through the Bay Networks Collateral Catalog The catalog is located on the World Wide Web at support baynetworks com catalog html and is divided into sections arranged alphabetically xii 300019 B Rev 00 Preface e The CD ROMs section lists available CDs e The Guides Books section lists books on technical topics e The Technical Manuals section lists available printed documentation sets Make a note of the part numbers and prices of the items that you want to order Use the Marketing Collateral Catalog description link to place an order and to print the order form How to Get Help For product assistance
16. T LICENSEE HAS READ THIS AGREEMENT UNDERSTANDS IT AND AGREES TO BE BOUND BY ITS TERMS AND CONDITIONS LICENSEE FURTHER AGREES THAT THIS AGREEMENT IS THE ENTIRE AND EXCLUSIVE AGREEMENT BETWEEN BAY NETWORKS AND LICENSEE WHICH SUPERSEDES ALL PRIOR ORAL AND WRITTEN AGREEMENTS AND COMMUNICATIONS BETWEEN THE PARTIES PERTAINING TO THE SUBJECT MATTER OF THIS AGREEMENT NO DIFFERENT OR ADDITIONAL TERMS WILL BE ENFORCEABLE AGAINST BAY NETWORKS UNLESS BAY NETWORKS GIVES ITS EXPRESS WRITTEN CONSENT INCLUDING AN EXPRESS WAIVER OF THE TERMS OF THIS AGREEMENT iv 300019 B Rev 00 Contents Preface ETE e eee ee ee E eee eet er ee cere deter rear ery mere rrr mer nace er errr ix Bie tig Ree Talc ett aaeemeerer eer tect re terrence et tern err renner eer reer rer creat sere rermerrr ce tern reer er rrr rere x PTO E dacssttpccseuteapiastiaskapenisiapaaeeh santiarn ma ce pee A maT EA Ease MRR aMaaaSETTINES xi Bay Networks Technical Publications cccccsccccusssccodussbcensschsceecuscsececuussceocuss anandan xi Fow to Get HEI iranin aa cee xii Chapter 1 Starting and Configuring the HTTP Server Browser ReguirememiS osicmimesinneninnnnsnnninin rere Perr ter E rer rye te 1 1 Starting the HTTP Server Using install bat smiiid 1 2 Starting the HTTP Server Using the BCC or Site Manager ccecceseeeeteteeteees 1 3 Seting HTTP Serner SUNY ss ces caley cade aca sane based cata e eee amie deca nseateate 1 4 User Name Password Securify Concepts icccccccucec
17. e Bay Command Console BCC Using a Domain Name Instead of an IP Address By specifying the Domain Name parameter you let the server be accessible by a domain name rather than by IP address The Domain Name parameter must be set to the domain name that a DNS lookup would return for the router The name can consist of any valid string of characters that constitute a domain name Accept the default value no domain name to indicate that the server is accessible only by the IP address or specify a domain name to use instead of the IP address Go to Starting and Configuring the HTTP Server 300019 B Rev 00 Starting and Configuring the HTTP Server Customizing HTTP Parameters Adding the HTTP Server to a router automatically enables HTTP on the router using port 80 sets access authentication to basic and uses the IP address to access the router You can change these settings using either the BCC or Site Manager Using the BCC To change these parameter settings first navigate to the http prompt To disable http on the router enter disable For example http disable To change the port number enter port lt port_number gt For example http port 81 To specify access authentication level enter digest or basic For example the following command configures digest authentication box http http digest http To specify the use of a domain name for the router enter domain name lt domain_name gt
18. efault configuration settings after completing the install bat procedure For information on modifying the default HTTP Server settings see Customizing HTTP Parameters After you run the install bat script you can install Site Manager software as described in Quick Starting Routers Go to Starting and Configuring the HTTP Server 300019 B Rev 00 Starting and Configuring the HTTP Server Starting the HTTP Server Using the BCC or Site Manager If you did not use the Quick Start procedure to start the HTTP Server you can start it using the BCC or Site Manager When you complete this procedure the HTTP Server software is configured on the router Before you start the HTTP Server verify that you have configured IP on an interface You can start the HTTP Server using default values for all parameters For information on modifying the default HTTP Server settings see Customizing HTTP Parameters Using the BCC Adding the HTTP Server to a router automatically loads TCP on all slots To add the HTTP Server to a router navigate to the box prompt and enter http For example the following command adds HTTP Server to a router box http http Go to Starting and Configuring the HTTP Server 300019 B Rev 00 Managing Routers Using the HTTP Server Using Site Manager You can configure HTTP Server software in any Configuration Manager mode To start HTTP Server software complete the following task
19. es an overview of the HTTP Server What the HTTP Server Does Navigating the HTTP Server Interface To obtain Web accessible data you must configure the HTTP Server software on the router Chapter 1 Starting and Configuring the HTTP Server summarizes the configuration procedure What the HTTP Server Does The HTTP Server is a graphical user interface GUD that lets you view real time device summaries events alerts and statistics The HTTP Server graphically displays information similar to and a superset of the text only information available through the BCC show enable and disable commands Through this point and click interface you also have direct access to online documentation and Bay Networks Technical Support The information that you gather through the HTTP Server interface can help you monitor your network s performance on a device by device basis You can see for example where congestion is occurring or where transmission or reception problems exist For detailed information about interpreting this information refer to Troubleshooting Routers and Event Messages for Routers 300019 B Rev 00 2 1 Managing Routers Using the HTTP Server You see a multiframe window when you specify a device in your browser s location field or when you click on the Summary folder icon then on the Info icon in the navigational frame Banner The top frame shows the Bay Networks logo and the device type The banne
20. ess authentication security in use Domain Name The domain name if any that can be used to access this router HTTP Counters HTTP counters provide the following information HTTP Statistic Meaning Total Requests Received The total number of requests that this entity received Total Request Errors The total number of request errors that this entity detected as server Total Request Discards The total number of requests that this entity discarded as server Total Responses The total number of responses that this entity generated or received Total In Unknowns The total number of unknown messages that this entity received 300019 B Rev 00 Managing Routers Using the HTTP Server HTTP Request Statistics Total Rx Octets The total number of bytes that this entity received Total Tx Octets The total number of bytes that this entity transmitted Total Time Outs The total number of timeouts for this entity Start Time The date and time that the HTTP services were enabled HTTP request statistics provide the following information HTTP Statistic Meaning Method The HTTP standard request method to which these statistics apply Total In The number of requests of this type that this entity received In Last Time The date and time the last request was received HTTP Response Statistics HTTP response statistics i
21. etwork as clear text Digest authentication uses an encrypted password If you specify digest authentication but your browser does not support this authentication reverts to basic Accept the default value Basic or specify Digest 1 3 6 1 4 1 18 3 5 3 22 1 1 7 Domain Name Configuration Manager gt Protocols gt Global Protocols gt HTTP gt Global None Any valid string of characters constituting a domain name Lets the server be accessible by a domain name rather than by IP address The Domain Name parameter must be set to the domain name that a DNS lookup would return for the router Accept the default value no domain name to indicate that the server is accessible only by the IP address or specify a domain name to use instead of the IP address Accept the default value no domain name to indicate that the server is accessible only by the IP address or specify a domain name to use instead of the IP address 1 3 6 1 4 1 18 3 5 3 22 1 1 8 300019 B Rev 00 A 3 Appendix B Show Commands for the HTTP Server Use the Bay Command Console BCC show command to display statistical information about the HTTP Server on the router The statistics available through the BCC are a subset of the information available through the HTTP Server interface itself See Using the Bay Command Console for information about show scripts command syntax This chapter contains the following information about show commands e Sample show
22. ew e All circuit alerts on the router e All or a selection of event log messages Go to Monitoring Circuit Alerts and Events 300019 B Rev 00 4 1 Managing Routers Using the HTTP Server Displaying Circuit Alerts A circuit alert indicates a condition such as a port interface that has been brought down unexpectedly that requires your immediate attention To view any exceptional status conditions for any interface on the router click on Fault gt Circuit Alert in the navigational frame For each index item the circuit alerts display shows e Index number e Circuit name e Administrative state e Operational state e Type e MAC address e Maximum transmission unit MTU e Line speed Go to Monitoring Circuit Alerts and Events Viewing the Event Log An event is something that happens to the operating status of a router The router stores each event as a single entry in a memory resident log file The event log for a router is the composite of all the events that occur for all the processors in the router An event message provides a brief description of an event along with the event code associated with that event Use the event code to look up the meaning of the message and what you must do about it in the events database To view the events for a router click on Fault gt Events in the navigational frame Filtering What the Event Log Shows Interpreting Event Messages Go to Monitori
23. he user name and password are passed over the network as clear text While this serves to verify the identity of the user the information is vulnerable to anyone with a sniffer or similar device 300019 B Rev 00 1 5 Managing Routers Using the HTTP Server Digest Authentication Digest authentication based on RFC 2069 uses an encrypted password to verify a user s identity Like basic access authentication digest uses a challenge response model To use digest authentication you must configure the HTTP Server Authentication parameter as digest and your browser must be capable of supporting digest authentication If your browser lacks this capability the HTTP Server reverts to basic authentication Network Address Filtering For additional security you can implement IP access control filters when you configure IP on the router These filters further restrict access to the router limiting access to specific IP addresses or IP address ranges You must also ensure that IP is appropriately configured to support HTTP To do this you must ensure that e The configuration for the IP service also has HTTP configured e The appropriate access policy filters are configured for HTTP Specify these requirements as part of the IP configuration process using the BCC For additional information about IP access control filters and how to configure them see Configuring IP Utilities For general instructions about using the BCC see Using th
24. icable entries show http summary The show http summary command displays summary statistics about HTTP services on the router The output contains the following information Total Requests The total number of requests the router received Received Total Request Errors The number of received requests that were in error Total Request The number of received requests that were discarded Discards Total Responses The number of router responses Total In Unknowns The number of unrecognizable requests received Total Rx Octets The number of received octets Total Tx Octets The number of transmitted octets Total Time Outs The number of time outs that occurred since the last reset Start Time The time of the last router reset 300019 B Rev 00 B 3 Managing Routers Using the HTTP Server show http requests The show http requests command displays HTTP request statistics for the router The output contains the following information Method An HTTP keyword indicating a type of request Total In The number of requests received In Last Time The time the most recent request was received show http responses The show http requests command displays HTTP response statistics for the router The output contains the following information Status A numeric status code and a brief interpretation for a response category Total Out The number of responses sent Out Last Time The time the most recent response was sent B
25. ice Click on the line that indicates the type of information you want to display then click on Launch To return to this window click on File gt Exit in the resulting window Viewing HTTP Statistics Each statistical window shows the window name name dat window description SNMP agent IP address and number of elements in the display To see these statistics Choose this option What the window shows for each element HTTP requests httoreg dat HTTP request statistics Methods Total requests Total In for each method HTTP responses hittoresp dat HTTP response statistics Status Number of times the server responds for each status type TotalOut 300019 B Rev 00 5 5 Managing Routers Using the HTTP Server To see these statistics Choose this option What the window shows for each element HTTP server configuration httpsrv dat HTTP server configuration statistics e State enabled or disabled e Operational status Port number Access authorization level Domain name HTTP summary statistics httpsum dat HTTP summary statistics overview of the router s current state e Total requests received e Total request errors Total discarded requests Total responses Total unknown inputs e Total bytes received Total bytes sent e Total timeouts e Start time 5 6 300019 B Rev 00 Chapter 6 Viewing Router
26. inate links Global Traffic Interfaces Forwarding Hosts Routes Services RIP and SAP 300019 B Rev 00 Viewing Router Protocol Statistics To see these statistics Use this path Global Statistics gt Protocols gt IPX gt Global Traffic Statistics gt Protocols gt IPX gt Traffic Interfaces Statistics gt Protocols gt IPX gt Interfaces Forwarding Statistics gt Protocols gt IPX gt Forwarding Hosts Statistics gt Protocols gt IPX gt Hosts Routes Statistics gt Protocols gt IPX gt Routes Services Statistics gt Protocols gt IPX gt Services RIP Statistics gt Protocols gt IPX gt RIP SAP Statistics gt Protocols gt IPX gt SAP Viewing AppleTalk Statistics Clicking on Statistics gt Protocols gt AppleTalk in the navigational frame reveals the following subordinate links Global Traffic Interfaces Routes ARP Cache and Zones To see these statistics Use this path Global Statistics gt Protocols gt AppleTalk gt Global Traffic Statistics gt Protocols gt AppleTalk gt Traffic Interfaces Statistics gt Protocols gt AppleTalk gt Interfaces Routes Statistics gt Protocols gt AppleTalk gt Routes ARP Cache Statistics gt Protocols gt AppleTalk gt ARP Cache RIP Statistics gt Protocols gt AppleTalk gt RIP Zones Statistics gt Protocols gt AppleTalk gt Zones 300019 B Rev 00 Append
27. ination of this license 8 Export and Re export Licensee agrees not to export directly or indirectly the Software or related technical data or information without first obtaining any required export licenses or other governmental approvals Without limiting the foregoing Licensee on behalf of itself and its subsidiaries and affiliates agrees that it will not without first obtaining all export licenses and approvals required by the U S Government i export re export transfer or divert any such Software or technical data or any direct product thereof to any country to which such exports or re exports are restricted or embargoed under United States export control laws and regulations or to any national or resident of such restricted or embargoed countries or ii provide the Software or related technical data or information to any military end user or for any military end use including the design development or production of any chemical nuclear or biological weapons 9 General If any provision of this Agreement is held to be invalid or unenforceable by a court of competent jurisdiction the remainder of the provisions of this Agreement shall remain in full force and effect This Agreement will be governed by the laws of the state of California Should you have any questions concerning this Agreement contact Bay Networks Inc 4401 Great America Parkway PO Box 58185 Santa Clara California 95054 8185 LICENSEE ACKNOWLEDGES THA
28. ion Manager window choose Protocols The Protocols menu opens Choose Global Protocols 2 The Global Protocols menu opens 3 Choose HTTP The HTTP menu opens Choose Global The Edit HTTP Global Parameters window opens The parameter descriptions follow Enable Disable Configuration Manager gt Protocols gt Global Protocols gt HTTP gt Global When you enable the HTTP Server this parameter is automatically set to Enabled Enabled Disabled Enables or disables the HTTP Server on this interface To prohibit the use of the HTTP Server on this interface set this parameter to Disabled 1 3 6 1 4 1 18 3 5 3 22 1 1 2 Port Configuration Manager gt Protocols gt Global Protocols gt HTTP gt Global 80 0 to 4096 Specifies the port number on which you enable the HTTP Server Accept the default value 80 or specify a value from 0 to 4096 1 3 6 1 4 1 18 3 5 3 22 1 1 4 A 2 300019 B Rev 00 Parameter Path Default Options Function Instructions MIB Object ID Parameter Path Default Options Function Instructions MIB Object ID Site Manager Parameters Authentication Configuration Manager gt Protocols gt Global Protocols gt HTTP gt Global Basic Basic Digest Specifies the type of authentication to use on this interface basic or digest Basic authentication verifies the user s identity using the user name and password passed over the n
29. ional state of the port up or down If the Enabled column shows that the port is enabled but the State column shows that the port is down there is a problem with the port Viewing Traffic Statistics for All Ports To view traffic statistics for all ports click on Statistics gt Ports gt Summary Viewing Ethernet Port Statistics Clicking on Statistics gt Ports gt Ethernet in the navigational frame reveals the following subordinate links Summary Traffic Rx Errors and Tx Errors To see these statistics Use this path Summary Statistics gt Ports gt Ethernet gt Summary Traffic Statistics gt Ports gt Ethernet gt Traffic Rx Errors Statistics gt Ports gt Ethernet gt Rx Errors Tx Errors Statistics gt Ports gt Ethernet gt Tx Errors 6 2 300019 B Rev 00 Viewing Router Port Statistics Viewing Serial Port Statistics Clicking on Statistics gt Ports gt Serial in the navigational frame reveals the following subordinate links Summary Traffic Rx Errors Tx Errors and Sys Errors To see these statistics Summary Use this path Statistics gt Ports gt Serial gt Summary Traffic Statistics gt Ports gt Serial gt Traffic Rx Errors Tx Errors Statistics gt Ports gt Serial gt Rx Errors Statistics gt Ports gt Serial gt Tx Errors Sys Errors Statistics gt Ports gt Serial gt Sys Errors Viewing FDDI Port Statis
30. is ethernet 2 1 lt parameter gt lt value gt you enter ethernet 2 1 and as many parameter value pairs as needed 300019 B Rev 00 italic text screen text separator gt vertical line Preface Indicates file and directory names new terms book titles and variables in command syntax descriptions Where a variable is two or more words the words are connected by an underscore Example If the command syntax is show at lt valid_route gt valid_route is one variable and you substitute one value for it Indicates system output for example prompts and system messages Example Set Bay Networks Trap Monitor Filters Shows menu paths Example Protocols gt IP identifies the IP option on the Protocols menu Separates choices for command keywords and arguments Enter only one of the choices Do not type the vertical line when entering the command Example If the command syntax is show ip alerts routes you enter either show ip alerts or show ip routes but not both 300019 B Rev 00 xi Managing Routers Using the HTTP Server Acronyms ARP Address Resolution Protocol BootP Bootstrap Protocol FDDI Fiber Distributed Data Interface FTP File Transfer Protocol HSSI High Speed Sserial Interface HTTP Hypertext Transfer Protocol ICMP Internet Control Message protocol IP Internet Protocol IPX Internet Packet Exchange MAC media access control RIP Routing Information Protocol
31. istics for all ports 6 2 transmitted tx octets HTTP statistic 5 4 troubleshooting a port 6 2 7 2 U unknowns HTTP statistic 5 3 Ww warning event meaning 4 3 300019 B Rev 00
32. ix A Site Manager Parameters This appendix contains the Site Manager parameter descriptions for the HTTP Server You can display the same information using Site Manager or the BCC online Help For each parameter this appendix provides the following information Parameter name Configuration Manager menu path Default setting Valid parameter options Parameter function Instructions for setting the parameter Management information base MIB object ID The Technician Interface allows you to modify parameters by issuing set and commit commands with the MIB object ID This process is equivalent to modifying parameters using Site Manager For more information about using the Technician Interface to access the MIB see Using Technician Interface Software Caution The Technician Interface does not verify the validity of your parameter values Entering an invalid value can corrupt your configuration 300019 B Rev 00 A 1 Managing Routers Using the HTTP Server Site Manager Parameters Parameter Path Default Options Function Instructions MIB Object ID Parameter Path Default Options Function Instructions MIB Object ID The Edit HTTP Global Parameters window contains the parameters that you can configure for the HTTP Server To access the Edit HTTP Global Parameters window complete the following tasks Site Manager Procedure You do this System responds 1 In the Configurat
33. ken Ring gt Summary Traffic Statistics gt Ports gt Token Ring gt Traffic Rx Errors Statistics gt Ports gt Token Ring gt Rx Errors Tx Errors Statistics gt Ports gt Token Ring gt Tx Errors Sys Errors Statistics gt Ports gt Token Ring gt Sys Errors 300019 B Rev 00 Chapter 7 Viewing Router Protocol Statistics Clicking on Statistics gt Protocols displays the following folders in the navigational frame e IP e IPX e AppleTalk To get statistical information about any protocol type click on the appropriate link Each protocol folder contains links to summary statistics traffic statistics number of packets transmitted and received and interface statistics as well as to other statistics specific to that protocol The following sections show and briefly describe these displays Changing the Administrative Status of a Port Viewing IP Statistics Viewing IPX Statistics Viewing AppleTalk Statistics Changing the Administrative Status of a Port A user who has Manager level access privileges can click on a radio button in the first column of the table in the interface statistics window for any protocol type to enable or disable that is change the administrative setting of the port communicating with a router you will no longer be able to monitor that router s operation with the HTTP Server Caution If you disable the interface through which your Web browser is
34. n part The Software and user manuals embody Bay Networks and its licensors confidential and proprietary intellectual property Licensee shall not sublicense assign or otherwise disclose to any third party the Software or any information about the operation design performance or implementation of the Software and user manuals that is confidential to Bay Networks and its licensors however Licensee may grant permission to its consultants subcontractors and agents to use the Software at Licensee s facility provided they have agreed to use the Software only in accordance with the terms of this license 3 Limited warranty Bay Networks warrants each item of Software as delivered by Bay Networks and properly installed and operated on Bay Networks hardware or other equipment it is originally licensed for to function substantially as described in its accompanying user manual during its warranty period which begins on the date Software is first shipped to Licensee If any item of Software fails to so function during its warranty period as the sole remedy Bay Networks will at its discretion provide a suitable fix patch or workaround for the problem that may be included in a future Software release Bay Networks further warrants to Licensee that the media on which the Software is provided will be free from defects in materials and workmanship under normal use for a period of 90 days from the date Software is first shipped to Licensee Bay Network
35. nclude HTTP Statistic Meaning Status An HTTP standard code and message description indicating the status of the response Total Out The number of times this response was generated Out Last Time The date and time the most recent response was sent Go to Viewing Router Services Statistics Using the Statistics Manager to View HTTP Server Statistics To use Site Manager Statistics Manager tool to view statistical information for the HTTP Server click on Statistics on the toolbar or from the Site Manager menu choose Tools gt Statistics Manager Select the router that you want to monitor The Statistics Manager window appears showing the device IP address and for each circuit on that device showing the slot connector type and protocols 300019 B Rev 00 Viewing Router Services Statistics Selecting the Windows to Display Starting the Statistics Launch Facility Viewing HTTP Statistics Selecting the Windows to Display Use the Screen Manager tool to select the windows to display In the Statistics Manager window click on Tools gt Screen Manager Add the HTTP windows to the list of those to display then exit the Screen Manager Starting the Statistics Launch Facility In the Statistics Manager window click on Tools gt Launch Facility to display the Statistics Launch Facility window which lets you choose the type of statistical information that you want to view for this dev
36. nd Manager These are the same as the login names for the Technician Interface Similarly a user name password authorization mechanism controls access to each realm e User access privileges let you view information e Manager access privileges grant complete access to the router letting you for example enable and disable an interface Before allowing any Manager level operations however the HTTP Server requires that the system administrator set a nonnull Manager password If the system administrator does not set a User password the HTTP Server accepts an empty null string as the password Generally the system administrator sets passwords using Technician Interface commands just as for console access through the Technician Interface If you have User privileges and attempt to access information requiring Manager privileges or if you attempt to use the Manager login with a null password the HTTP Server prompts you for the Manager password If you do not provide the appropriate password an error message appears and you cannot perform that operation You control the level of access authentication protection when you configure the Authentication parameter For specific information about how to set user names and passwords see Using Technician Interface Software For information about securing a router as part of the Quick Start procedure see Quick Starting Routers Basic Access Authentication In basic access authentication t
37. nformation on using the Statistics Manager see Using the Statistics Manager to View HTTP Server Statistics 300019 B Rev 00 5 1 Managing Routers Using the HTTP Server Using the Web interface clicking on Statistics gt Services displays links to the Statistics for each service To see these Preferred servers Relay agents statistics Use this path TFTP Statistics gt Services gt TFTP TCP Statistics gt Services gt TCP FTP Statistics gt Services gt FTP Telnet Statistics gt Services gt Telnet BootP Statistics gt Services gt Bootp This reveals several subordinate links Traffic Interfaces Clients Preferred Srv Servers and Relay Agents Traffic Statistics gt Services gt Bootp gt Traffic Interfaces Statistics gt Services gt Bootp gt Interfaces Clients Statistics gt Services gt Bootp gt Clients Statistics gt Services gt Bootp gt Preferred Srv Statistics gt Services gt Bootp gt Relay Agents SNMP e Counters Communities e Entity traps Exceptions Statistics gt Services gt SNMP This reveals the following subordinate links Counters Communities Entity Traps and Exceptions Statistics gt Services gt SNMP gt Counters Statistics gt Services gt SNMP gt Communities Statistics gt Services gt SNMP gt Entity Traps Statistics gt Services gt SNMP gt Exceptions HTTP Configuration Counters Req
38. ng Circuit Alerts and Events 300019 B Rev 00 Monitoring Circuit Alerts and Events Filtering What the Event Log Shows By default the event log display shows Fault Warning and Info event messages e To show other event messages click on the check boxes to select the appropriate Event Message Severity Levels e To restrict the display to one or more specific slots or entities and to show only events that happen after a specific date and time fill in the fields in this frame separating individual entries with spaces Note All entity names are case sensitive For a list of entity names refer to the events database Go to Monitoring Circuit Alerts and Events Interpreting Event Messages Event Messages for Routers provides detailed information about interpreting event messages and taking appropriate action Most messages document routine occurrences that do not require you to do anything The following table lists and briefly describes the severity levels Event Message Severity Levels Severity Description Fault Major service disruption usually caused by a configuration network or hardware problem The entities involved keep restarting until the problem is resolved either by the router itself or by you Warning Service acted in an unexpected manner Info Routine event Usually no action is required Trace Detailed history of everything that happens on the router Because of
39. ning the latest version of Bay Networks BayRS and Site Manager software For information about upgrading BayRS and Site Manager see the upgrading guide for your version of BayRS 300019 B Rev 00 ix Managing Routers Using the HTTP Server Text Conventions This guide uses the following text conventions angle brackets lt gt bold text braces brackets ellipsis points Indicate that you choose the text to enter based on the description inside the brackets Do not type the brackets when entering the command Example If the command syntax is ping lt p_address gt you enter ping 192 32 10 12 Indicates command names and options and text that you need to enter Example Enter show ip alerts routes Example Use the dinfo command Indicate required elements in syntax descriptions where there is more than one option You must choose only one of the options Do not type the braces when entering the command Example If the command syntax is show ip alerts routes you must enter either show ip alerts or show ip routes but not both Indicate optional elements in syntax descriptions Do not type the brackets when entering the command Example If the command syntax is show ip interfaces alerts you can enter either show ip interfaces or show ip interfaces alerts Indicate that you repeat the last element of the command as needed Example If the command syntax
40. of the Rights in Technical Data and Computer Software clause of DFARS 252 227 7013 for agencies of the Department of Defense or their successors whichever is applicable 6 Use of Software in the European Community This provision applies to all Software acquired for use within the European Community If Licensee uses the Software within a country in the European Community the Software Directive enacted by the Council of European Communities Directive dated 14 May 1991 will apply to the examination of the Software to facilitate interoperability Licensee agrees to notify Bay Networks of any such intended examination of the Software and may procure support and assistance from Bay Networks 7 Term and termination This license is effective until terminated however all of the restrictions with respect to Bay Networks copyright in the Software and user manuals will cease being effective at the date of expiration of the Bay Networks copyright those restrictions relating to use and disclosure of Bay Networks confidential information shall continue in effect Licensee may terminate this license at any time The license will automatically terminate if Licensee fails to comply with any of the terms and conditions of the license Upon termination for any reason Licensee will immediately destroy or return to Bay Networks the Software user manuals and all copies Bay Networks is not liable to Licensee for damages in any form solely by reason of the term
41. puter or if applicable on a single authorized device identified by host ID for which it was originally acquired b to copy the Software solely for backup purposes in support of authorized use of the Software and c to use and copy the associated user manual solely in support of authorized use of the Software by Licensee This license applies to the Software only and does not extend to Bay Networks Agent software or other Bay Networks software products Bay Networks Agent software or other Bay Networks software products are licensed for use under the terms of the applicable Bay Networks Inc Software License Agreement that accompanies such software and upon payment by the end user of the applicable license fees for such software 2 Restrictions on use reservation of rights The Software and user manuals are protected under copyright laws Bay Networks and or its licensors retain all title and ownership in both the Software and user manuals including any revisions made by Bay Networks or its licensors The copyright notice must be reproduced and included with any copy of any portion of the Software or user manuals Licensee may not modify translate decompile disassemble use for any competitive analysis reverse engineer distribute or create derivative works from the Software or user manuals or any copy in whole or in part Except as expressly provided in this Agreement Licensee may not copy or transfer the Software or user manuals in whole or i
42. r also identifies the device by name specifies its physical location and IP address and lists the name of the contact person responsible for that device The IP address is a link that you can click on to establish a Telnet connection to the device Navigational frame The frame on the left contains links to each monitored function Initially these links are all folders The folders and the documents they contain in the navigational frame are active links to device information Display frame The large frame on the lower right side displays the retrieved web data Navigating the HTTP Server Interface The navigational frame contains the following expandable folders Summary System information hardware status PROM information software image information system resource information and system task information Fault Circuit alerts and the event log Statistics Services ports and protocols Support Help release notes technical manuals and customer support links Click on each folder in turn to display the information for the device you are monitoring To show the types of data a folder contains click on the folder icon The folder opens revealing document icons representing the types of data within that folder To view a specific data type within a folder click on its document icon To close that is collapse a folder s contents click again on the folder icon 2 2 300019 B Rev 00 Chapter 3
43. rived from such portions of the software without specific prior written permission SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE In addition the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure that may incorporate by reference certain limitations and notices imposed by third parties Bay Networks Inc Software License Agreement NOTICE Please carefully read this license agreement before copying or using the accompanying software or installing the hardware unit with pre enabled software each of which is referred to as Software in this Agreement ji 300019 B Rev 00 BY COPYING OR USING THE SOFTWARE YOU ACCEPT ALL OF THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT THE TERMS EXPRESSED IN THIS AGREEMENT ARE THE ONLY TERMS UNDER WHICH BAY NETWORKS WILL PERMIT YOU TO USE THE SOFTWARE If you do not accept these terms and conditions return the product unused and in the original shipping container within 30 days of purchase to obtain a credit for the full purchase price 1 License Grant Bay Networks Inc Bay Networks grants the end user of the Software Licensee a personal nonexclusive nontransferable license a to use the Software either on a single com
44. s Site Manager Procedure You do this System responds als In the Configuration Manager window choose Protocols The Protocols menu opens Choose Global Protocols The Global Protocols menu opens 3 Choose TCP The TCP menu opens A Choose Create TCP You return to the Configuration Manager window Choose Protocols The Protocols menu opens Choose Global Protocols The Global Protocols menu opens Choose HTTP The HTTP menu opens SINJ Oa Choose Create HTTP You return to the Configuration Manager window Go to Starting and Configuring the HTTP Server Setting HTTP Server Security The HTTP Server allows access to device information from anywhere in the network To protect your network information you can implement security controls The HTTP Server offers access control through user name password security basic access or digest authentication and network address filtering User Name Password Security Concepts Basic Access Authentication Digest Authentication Network Address Filtering 300019 B Rev 00 Starting and Configuring the HTTP Server User Name Password Security Concepts The HTTP Server controls access to network device information by grouping that information into collections called realms that share the same security attributes The HTTP Server defines two security realms on the router User a
45. s cissasctedacce tenets aaan E a A ORRA A 2 Appendix B Show Commands for the HTTP Server Sample show Command Output ossai orehia ere reer ae abrek oreet d B2 Galine Helt forsk Gonmande senuonanoniniaiiN a i i B 2 Show Commands forthe HTTP Server s ccccceecssceecnsteencusisedencensaeieeseaneennannncecinane B 3 SOU PUTS GUY a E E E A E E E T B 3 By TA POSTS sionin A A SAN B 4 show http responses Doekes arena ieni ro bes PET abota o B 4 Index 300019 B Rev 00 vii Preface This guide describes how to configure and use the Bay Networks HTTP Server an embedded Web based router management tool included with the Bay Networks router operating system software and accessible from any standard Web browser Using HTTP Server software you can monitor network devices viewing summary fault and statistical information on a device by device basis You can use the Bay Command Console BCC or Site Manager to configure the HTTP Server software on a router In this guide you will find configuration instructions using both the BCC and Site Manager Before You Begin Before using this guide you must complete the following procedures For a new router e Install the router see the installation guide that came with your router e Connect the router to the network and create a pilot configuration file see Quick Starting Routers e Configure IP on the router see Configuring IP Services Make sure that you are run
46. s will replace defective media at no charge if it is returned to Bay Networks during the warranty period along with proof of the date of shipment This warranty does not apply if the media has been damaged as a result of accident misuse or abuse The Licensee assumes all responsibility for selection of the Software to achieve Licensee s intended results and for the installation use and results obtained from the Software Bay Networks does not warrant a that the functions contained in the software will meet the Licensee s requirements b that the Software will operate in the hardware or software combinations that the Licensee may select c that the operation of the Software will be uninterrupted or error free or d that all defects in the operation of the Software will be corrected Bay Networks is not obligated to remedy any Software defect that cannot be reproduced with the latest Software release These warranties do not apply to the Software if it has been i altered except by Bay Networks or in accordance with its instructions ii used in conjunction with another vendor s product resulting in the defect or iii damaged by improper environment abuse misuse accident or negligence THE FOREGOING WARRANTIES AND LIMITATIONS ARE EXCLUSIVE REMEDIES AND ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Licensee is responsible for the securi
47. ssscievessssoviseteiaie vaca iatunecens ckectenssess 1 5 Basie Access AUNGNUCANON eida coccvnsceaeepniciawbin pan eancepneaeoee wunduea ae peatiawonapaiaabedamesiaienonies 15 Digest AUG IMIG AOI 22 cccsscisSoncnnncetecannedacanennnct oA E ERAR 1 6 Metwok Address FICE II aiisscaisscuns stirs dantesns cadovuinaddnnaronnckanennaain caso eaa aE N desired 1 6 Using a Domain Name Instead of an IP Address E T Saboia aeni ae B Gustomamg PHI TP Parame riiai a R a 1 7 Chapter 2 HTTP Server Concepts What the HTTP Server DOGG sicir Aran aaae aae Aaa aan A Aar ARARE a 2 1 Navigating the HTTP Server Interface ausirrswisiernususenninui saninin ennaii edia 2 2 Chapter 3 Monitoring Routers Using the HTTP Server GENNA MEI oiia A 3 1 Specifying a Router to Monitor 0 cceeceeeeeeeeee er PART PE P EE E 3 2 viewing eral System SAUS daccccessccaccccancetcictoniedcie aa neei Ai ona 3 2 300019 B Rev 00 V Chapter 4 Monitoring Circuit Alerts and Events FAUN ICON sccncestsceneercaiconieaseseniepedacsimnd EE AA 4 1 Benian Sre AEE nania N envi mee 4 2 Viewing the Event Log assesseer bie re aN T P irut re treed Filtering What the Event Log chews E EE T E E DRAG eae UNIAN 4 3 Interpreting Event Messages ccccceiccsstecttencteedesesteanresssieaeaastiaheectsanateossaheeneetacanbe 4 3 Chapter 5 Viewing Router Services Statistics Router Serves SUAS aamonga earki iniaa naaar kadaa Saa 5 1 Using the HTTP Server to View HTTP Statistics eimai acu
48. the amount of information that the Trace function records Bay Networks recommends viewing this type of message only when diagnosing specific network problems Debug Information that Bay Networks Customer Support uses With few exceptions these messages do not appear in Event Messages for Routers Return to Monitoring Circuit Alerts and Events 300019 B Rev 00 Chapter 5 Viewing Router Services Statistics Examining the router s statistics along with the event log can give you a picture of how well your router is working When you click on Statistics in the navigational frame the folder opens to show the Services Ports and Protocols folders each containing subordinate links This chapter shows the Services statistics For Port Statistics go to Chapter 6 Viewing Router Port Statistics and for Protocol Statistics go to Chapter 7 Viewing Router Protocol Statistics descriptions of statistics for the other services are in the guides for each service Note This guide presents the details of the HTTP statistics Detailed gt Router Services Statistics Using the HTTP Server to View HTTP Statistics Using the Statistics Manager to View HTTP Server Statistics Router Services Statistics You can display router services statistics either through the Web interface by clicking on Statistics gt Services in the navigational frame or by using the Site Manager Statistics Manager For i
49. the specified device For each router slot Name of the software image file Source of that image Date and time the image was created Name of the configuration file Resources System resources on the specified hardware device For each router slot usage data for CPU Memory e Buffers Tasks System tasks on the specified hardware device For each active task Name of each task Usage data for the CPU memory and buffers Slots on which the task is running For detailed information about interpreting the information obtained through this interface refer to Troubleshooting Routers 300019 B Rev 00 Chapter 4 Monitoring Circuit Alerts and Events With the HTTP Server you can view the events and alerts generated by the entities on the router When you click on the Fault icon the folder opens and displays two document icons Click on these document icons to view e All circuit alerts on the router e All or a selection of event log messages You must first have configured and enabled the HTTP Server on your router as described in Starting and Configuring the HTTP Server For a detailed description of how to isolate and correct problems with a specific device refer to Troubleshooting Routers Fault Icon Displaying Circuit Alerts Viewing the Event Log Fault Icon Clicking on Fault in the navigational frame reveals two additional choices You can vi
50. tics Clicking on Statistics gt Ports gt FDDI in the navigational frame reveals the following subordinate links Summary Traffic Rx Errors Tx Errors and Sys Errors To see these statistics Use this path Summary Statistics gt Ports gt FDDI gt Summary Traffic Statistics gt Ports gt FDDI gt Traffic Rx Errors Statistics gt Ports gt FDDI gt Rx Errors Tx Errors Statistics gt Ports gt FDDI gt Tx Errors Sys Errors Statistics gt Ports gt FDDI gt Sys Errors 300019 B Rev 00 Managing Routers Using the HTTP Server Viewing HSSI Port Statistics Clicking on Statistics gt Ports gt HSSI in the navigational frame reveals the following subordinate links Summary Traffic Rx Errors Tx Errors and Sys Errors To see these statistics Use this path Summary Statistics gt Ports gt HSSI gt Summary Traffic Statistics gt Ports gt HSSI gt Traffic Rx Errors Statistics gt Ports gt HSSI gt Rx Errors Tx Errors Statistics gt Ports gt HSSI gt Tx Errors Sys Errors Statistics gt Ports gt HSSI gt Sys Errors Viewing Token Ring Port Statistics Clicking on Statistics gt Ports gt Token Ring in the navigational frame reveals the following subordinate links Summary Traffic Rx Errors Tx Errors and Sys Errors To see these statistics Use this path Summary Statistics gt Ports gt To
51. ty of its own data and information and for maintaining adequate procedures apart from the Software to reconstruct lost or altered files data or programs 4 Limitation of liability INNO EVENT WILL BAY NETWORKS OR ITS LICENSORS BE LIABLE FOR ANY COST OF SUBSTITUTE PROCUREMENT SPECIAL INDIRECT INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES RESULTING FROM INACCURATE OR LOST DATA OR LOSS OF USE OR 300019 B Rev 00 iii PROFITS ARISING OUT OF OR IN CONNECTION WITH THE PERFORMANCE OF THE SOFTWARE EVEN IF BAY NETWORKS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES IN NO EVENT SHALL THE LIABILITY OF BAY NETWORKS RELATING TO THE SOFTWARE OR THIS AGREEMENT EXCEED THE PRICE PAID TO BAY NETWORKS FOR THE SOFTWARE LICENSE 5 Government Licensees This provision applies to all Software and documentation acquired directly or indirectly by or on behalf of the United States Government The Software and documentation are commercial products licensed on the open market at market prices and were developed entirely at private expense and without the use of any U S Government funds The license to the U S Government is granted only with restricted rights and use duplication or disclosure by the U S Government is subject to the restrictions set forth in subparagraph c 1 of the Commercial Computer Software Restricted Rights clause of FAR 52 227 19 and the limitations set out in this license for civilian agencies and subparagraph c 1 ii
52. uests e Responses Statistics gt Services gt HTTP This reveals the following subordinate links Configuration Counters Requests and Responses Statistics gt Services gt HTTP gt Configuration Statistics gt Services gt HTTP gt Counters Statistics gt Services gt HTTP gt Requests Statistics gt Services gt HTTP gt Responses You must have Manager level access privileges to view the statistics for SNMP communities If you logged in with user level privileges HTTP prompts you to enter the manager login name and password Go to Viewing Router Services Statistics 300019 B Rev 00 Viewing Router Services Statistics Using the HTTP Server to View HTTP Statistics You can display HTTP Server statistics either through the Web interface by clicking on Statistics gt Services gt HTTP in the navigational frame or by using the Site Manager Statistics Manager HTTP Configuration Statistics HTTP Counters HTTP Request Statistics HTTP Response Statistics Using the Statistics Manager to View HTTP Server Statistics HTTP Configuration Statistics HTTP configuration statistics provide the following information Authentication HTTP Statistic Meaning State Whether the server is enabled or disabled Status Whether the server is currently up down initializing or not present Port The port number on which this server listens to requests The level of acc
53. ystem Status Use the summary information to get an overall picture of the operational state of the router The summary provides hardware and software information including this router s configuration and its internal resource usage To see the types of summary information available click on the Summary folder icon in the navigational frame 3 2 300019 B Rev 00 Monitoring Routers Using the HTTP Server The following table lists the icons within the Summary folder and the information that each displays when you click on it Icon Info Shows information for System Displayed summary information Device name the mnemonic name that the system administrator assigns e Location the location as defined by the system administrator Contact person responsible for that device as defined by the system administrator Up time the time elapsed since the last device reset MIB version the version number of the management information base MIB for the router software Software version the version number and creation date and time of the router software image Hardware Specific device e Model name and serial number Type revision and serial number of the processor and link module in each slot PROMs PROM modules in the device For the Boot PROM and for the Diagnostic PROM in that slot e Revision number Date and time of installation Software Software image on

Avaya Managing Routers HTTP Server User's Manual

Contents

Download Pdf Manuals

Related Search

Related Contents