Avaya BCM M7208 User's Manual
Contents
1. RTEL NETWORKS Enterprise Edge M7208 User Card 1999 Nortel N etworks P0908512 Issue 01 Your Enterprise Edge M7208 telephone Display Indicators appear beside lines and features Feature button starts or ends a feature Release button cancels active calls Hold button Dial pad Volume control Memory and line buttons are buttons with indicators for one touch dialing feature operation or line access shows the time date call information and guides you 720 Using Key Inquiry Check what is programmed on your memory keys Release all calls or lines with dial tone Press Feature 0 Press the key s that you want to check Read the display Press Feature when finished O1 BR D Adjusting display contrast Selecting a ring type and volume level _ Press Feature Z 2 Press 1 to 9 on the key pad for the contrast level you want the higher the number the higher the contrast level Y k Press Feature 6 2 Press ft BJ or 4 to hear the different ring types 3 While the telephone is ringing press to adjust the volume level 4 Press Feature to store the ring Adjusting the handset or telephone speaker volume 1 Press 0 3 when using the handset or the speaker Page 1 Enterprise Edge M7208 User Card Making and answering calls Answering calls Answering calls us2. and the feature code Label your new key Erasing memory keys 1 Ifyou are on a call or a line with dial tone press Hold or Ris 2 Press Feature J 8 Press the memory key you want to erase 4 Press Hold to erase the key Page 3 Enterprise Edge M7208 User Card Setting up the telephone Connecting the cords Connect to jack from distribution block ATTENTION Before attempting to carry out any work on the telephone ensure that the line cord is unplugged from the wall socket To remove any of the cords squeeze the release latch on the plug and gently pull the plug from the socket Connect the handset cord to the jack labelled with the telephone icon and route the cord as shown If you are using a headset route the cord along the channel in the base and connect the cord to the telephone jack that is marked with the headset icon Route the line cord through the stand and connect the cord to the telephone jack that is marked with the jack icon Attach the stand using either pair of slots to raise the back of the telephone to its highest position use these slots Once the above work is complete plug the line cord back into its wall socket Notice These telephones now conform to the latest standards in relation to the positioning of Q and Z on the number keys The Q appears on key number 7 and the Z appears on key number 9 Page 4 Enterprise Edge M7208 User Card Set
3. e retrieved only at your telephone System Administrator can program Handsfree for your telephone Switching between Handsfree and handset 1 Press and replace the handset to switch to Handsfree 2 Pick up the handset to switch back Using Mute 1 Press to turn the microphone OFF 2 Press again to turn the microphone ON Page 2 Enterprise Edge M7208 User Card Programming memory keys About memory keys Memory keys are the keys with indicators other than line or Handsfree keys Memory keys store telephone numbers or feature codes to give you one touch dialling or feature activation You can change what a memory key does by just programming it with a new number or feature You cannot program a line or Handsfree key Remember Press 0 to check a memory or line key Programming External Autodial memory keys If you are on a call or a line with dial tone press Hold Jor Ris Press u Press a memory key Dial the external number Press to store the number Label your new key DRN Internal Autodial If you are on a call or a line with dial tone press Hold or Ris Press Feature 2 Press amemory key Dial the extension number Label your new key O1 2 amp D Features 1 If you are on a call or a line with dial tone press Hold or Ris 2 Press Feature X 8 J 3 Press a memory key 4 5 Press Feature
4. ing the handset When your telephone rings or flashes beside an Intercom or line key 1 Lift the handset OR Press the key beside the flashing before lifting the handset Answering calls using Handsfree When your telephone rings or flashes beside an Intercom or line key 1 Press CES Making calls Depending upon the dialling mode programmed on your telephone you may have to lift the handset before making a call Line External calls using numbered line keys 1 If you do not have an external Prime line press a line key 2 Dial your call Intercom External calls using Intercom keys 1 Lift the handset 2 If gt appears beside an Intercom key enter a line pool access code OR Press an Intercom key without B gt then enter a line pool access code 3 When you hear external dial tone dial your call Internal calls using Intercom keys 1 If you do not have an internal Prime line press Intercom 2 Dial your call Note Line pool access codes and extension numbers are supplied by your System Administrator Making calls using Handsfree 1 Press instead of lifting the handset Holding Calls 1 Press Hold The P flashes beside the line on hold 2 Press the line key with the flashing B to return to the call Automatic hold Calls are put on hold automatically when you switch from one line to another Exclusive hold Use Exclusive Hold Feature _ Hold to keep a call on hold so that it can b
5. ting up the telephone Mounting the telephone on the wall Page 5 Enterprise Edge M7208 User Card P0908512 Issue 01
Download Pdf Manuals
Related Search