Avaya 16-MB User's Manual
Contents
1. 3 ur PY Petree iti rir itt ere HI CJ Sao O HA RRRRRRRRRRRRRRRRRR Ed Tr LA S e 0000000000 0000000000 0000000000 oo0o0o000000000 000000000000 000000000000 Oooo000000000 0000000000 D000000000 o000000000 D Figure 2 Locating the SIMM Sockets 2 To remove the SIMMs currently populating sockets U7 and U14 a Pull back on the retainers grasping the edges of the SIMM to release it b Gently lift up and pull out the SIMM Installing the ARE 16 MB Memory Upgrade Modules Installing the Memory Upgrade SIMMs This procedure assumes you have already removed the SIMMs from sockets U7 and U14 as described in the previous section Your upgrade kit contains two identical SIMMs To install them 1 Grasp one of the SIMMs by the edges and turn it so the notch at the center of the SIMM faces the center of socket U7 Figure 3 Figure 3 Inserting a SIMM into a Socket 2 Insert the SIMM into the socket at an angle of about 30 degrees from the vertical 3 Gently push down on the module so that the retainers grasp the SIMM locking it into place Figure 4 Installing the ARE 16 MB Memory Upgrade Kit When the SIMM is properly inserted the two tiny vertical black poles on the SIMM socket should line up with the two holes in the SIMM Retainer Black poles on sock2. Installing the ARE 16 MB Memory Upgrade Kit Part No 112830 Rev B April 1996 CES Bay Networks CES Bay Networks 4401 Great America Parkway 8 Federal Street Santa Clara CA 95054 Billerica MA 01821 Copyright 1988 1996 Bay Networks Inc All rights reserved Printed in the USA April 1996 The information in this document is subject to change without notice The statements configurations technical data and recommendations in this document are believed to be accurate and reliable but are presented without express or implied warranty Users must take full responsibility for their applications of any products specified in this document The information in this document is proprietary to Bay Networks Inc The software described in this document is furnished under a license agreement and may only be used in accordance with the terms of that license A summary of the Software License is included in this document Restricted Rights Legend Use duplication or disclosure by the United States Government is subject to restrictions as set forth in subparagraph c 1 Gi of the Rights in Technical Data and Computer Software clause at DFARS 252 227 7013 Notice for All Other Executive Agencies Notwithstanding any other license agreement that may pertain to or accompany the delivery of this computer software the rights of the United States Government regarding its use reproduction and disclosure are as set forth in the Commercia
3. University of California Berkeley The name of the University may not be used to endorse or promote products derived from such portions of the software without specific prior written permission SUCH PORTIONS OF THE SOFTWARE ARE PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE In addition the program and information contained herein are licensed only pursuant to a license agreement that contains restrictions on use and disclosure that may incorporate by reference certain limitations and notices imposed by third parties Electromagnetic Emissions Meets requirements of FCC Part 15 Class A EN 55 022 CISPR 22 1985 Class A and Class B VCCI Class 1 ITE Canada Requirements Only Canada CS 03 Rules and Regulations Note The Canadian Department of Communications label identifies certified equipment The certification means that the equipment meets certain telecommunications network protective operations and safety requirements The Department does not guarantee the equipment will operate to the user s satisfaction Before installing this equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the company s inside wiring associated with a singl
4. adian Department of Communications label identifies certified equipment This certification meets certain telecommunication network protective operational and safety requirements The department does not guarantee the equipment will operate to the users satisfaction Before installing the equipment users should ensure that it is permissible to be connected to the facilities of the local telecommunications company The equipment must also be installed using an acceptable method of connection In some cases the company s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly telephone extension cord The customer should be aware that compliance with the above condition may not prevent degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Caution Users should not attempt to make such connections themselves but should contact the appropri
5. alling the ARE 16 MB Memory Upgrade Modules This document describes how to install the 16 MB memory upgrade modules on an ATM Routing Engine ARE processor module The memory upgrade is supported by Router Software Version 9 01 and later To install the memory upgrade modules you must e Install the Virtual Buffer Memory VBM module Remove the existing Single Inline Memory Modules SIMMs e Install the new SIMMs This document describes each of these tasks Required Tools You need the following tools to install the memory upgrade modules e Phillips screwdriver e Antistatic wrist strap which comes with the upgrade kit Installing the ARE 16 MB Memory Upgrade Kit Shipment Contents Table 1 lists the contents of the 16 MB memory upgrade kit Order No AG1311007 If any parts are damaged or missing contact the Bay Networks Technical Response Center in your area Table 1 Shipment Contents Item Quantity Virtual Buffer Memory VBM module 1 Single Inline Memory Modules SIMMs 2 Phillips screws 4 Antistatic wrist strap 1 How to Get Help For additional information or advice contact the Bay Networks Technical Response Center in your area United States 1 800 2LAN WAN Valbonne France 33 92 966 968 Sydney Australia 61 2 903 5800 Tokyo Japan 81 3 328 005 Installing the VBM Module Before you can install the VBM module you must first remove the ARE processor module from the route
6. ate electrical inspection authority or electrician as appropriate Notes explicatives du minist re des Communications limites visant les accessoires L tiquette du minist re des Communications du Canada indique que appareillage est certifi c est dire qu il respecte certaines exigences de s curit et de fonctionnement visant les r seaux de t l communications Le minist re ne garantit pas que l appareillage fonctionnera la satisfaction de l utilisateur Avant d installer l appareillage s assurer qu il peut tre branch aux installations du service de t l communications local L appareillage doit aussi tre raccord selon des m thodes accept es Dans certains cas le c blage interne du service de t l communications utilis pour une ligne individuelle peut tre allong au moyen d un connecteur certifi prolongateur t l phonique Le client doit toutefois prendre note qu une telle installation n assure pas un service parfait en tout temps Les r parations de l appareillage certifi devraient tre confi es un service d entretien canadien d sign par le fournisseur En cas de r paration ou de modification effectu es par l utilisateur ou de mauvais fonctionnement de l appareillage le service de t l communications peut demander le d branchment de appareillage Pour leur propre s curit les utilisateurs devraient s assurer que les mises la terre des lignes de distribution d lect
7. e line individual service may be extended by means of a certified connector assembly telephone extension cord The customer should be aware that compliance with the above conditions may not prevent the degradation of service in some situations Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier Any repairs or alterations made by the user to this equipment or equipment malfunctions may give the telecommunications company cause to request the user to disconnect the equipment Users should ensure for their own protection that the electrical ground connections of the power utility telephone lines and internal metallic water pipe system if present are connected together This precaution may be particularly important in rural areas Caution Users should not attempt to make such connections themselves but should contact the appropriate electric inspection authority or electrician as appropriate Canada CS 03 R gles et r glements Note L tiquette du minist re des Communications du Canada indique que l appareillage est certifi c est dire qu il respecte certaines exigences de s curit et de fonctionnement visant les r seaux de t l communications Le minist re ne garantit pas que l appareillage fonctionnera la satisfaction de l utilisateur Avant d installer l appareillage s assurer qu il peut tre branch aux installations du service de t l co
8. et must line up with holes in SIMM C TJ E A160007A Figure 4 Locking a SIMM in Place 4 Repeat Steps 1 through 3 to install the other SIMM in socket U14 5 Install the ARE processor module in the BN Again refer to Installing and Maintaining BN Routers and use the same instructions as for replacing a FRE FRE 2 module
9. icense will automatically terminate upon improper handling of Software such as by disclosure or Bay Networks may terminate this license by written notice to licensee if licensee fails to comply with any of the material provisions of this license and fails to cure such failure within thirty 30 days after the receipt of written notice from Bay Networks Upon termination of this license licensee shall discontinue all use of the Software and return the Software and Documentation including all copies to Bay Networks Licensee s obligations under this license shall survive expiration or termination of this license Bay Networks Inc 4401 Great America Parkway Santa Clara CA 95054 8 Federal Street Billerica MA 01821 Contents Installing the ARE 16 MB Memory Upgrade Modules a AA 1 Shipment Contents ER EEE 2 aa KO al mmmmmmmm m m mmmmmmmmmmmmmrmrmrmrmrmrmrrmmmmmmmmmmmmmrmmmmmmmmrmmmHH 2 Elias VBM TWINS conato tai AA od 2 Removing SIMMs from the ARE Processor Module sss 4 Installing he Memory Upgrade SIMMS anne 9 Figures Figure 1 Aligning the VBM Module aussen monnaies 3 Figure 2 Locating the SIMM Sockets Y 4 Figure 3 nserting a SIMM dato a SOCKBE sosa ttt nen n eter ter End 5 Figure 4 LEE SER IM PIES uc aran ici 6 xi Tables Table 1 Shipment Contents cacon cnc AB dc hehe 2 xiii Inst
10. l Computer Software Restricted Rights clause at FAR 52 227 19 Trademarks of Bay Networks Inc ACE AEN BCN BLN BN CN FRE LN Optivity SynOptics SynOptics Communications Wellfleet and the Wellfleet logo are registered trademarks and AN ANH ASN BaySIS BayStack BCNX BLNX BNX EZ Internetwork EZ LAN FN PathMan PhonePlus PPX Quick2Config RouterMan SPEX Bay Networks Bay Networks Press the Bay Networks logo and the SynOptics logo are trademarks of Bay Networks Inc Third Party Trademarks All other trademarks and registered trademarks are the property of their respective owners Statement of Conditions In the interest of improving internal design operational function and or reliability Bay Networks Inc reserves the right to make changes to the products described in this document without notice Bay Networks Inc does not assume any liability that may occur due to the use or application of the product s or circuit layout s described herein Portions of the code in this software product are Copyright O 1988 Regents of the University of California All rights reserved Redistribution and use in source and binary forms of such portions are permitted provided that the above copyright notice and this paragraph are duplicated in all such forms and that any documentation advertising materials and other materials related to such distribution and use acknowledge that such portions of the software were developed by the
11. mmunications local L appareillage doit aussi tre raccord selon des m thodes accept es Dans certains cas le c blage interne du service de t l communications utilis pour une ligne individuelle peut tre allong au moyen d un connecteur certifi prolongateur t l phonique Le client doit toutefois prendre note qu une telle installation n assure pas un service parfait en tout temps Les r parations de l appareillage certifi devraient tre confi es un service d entretien canadien d sign par le fournisseur En cas de r paration ou de modification effectu es par l utilisateur ou de mauvais fonctionnement de l appareillage le service de t l communications peut demander le d branchment de appareillage Pour leur propre s curit les utilisateurs devraient s assurer que les mises la terre des lignes de distribution d lectricit des lignes t l phoniques et de la tuyauterie m tallique interne sont raccord es ensemble Cette mesure de s curit est particuli rement importante en milieu rural Attention Les utilisateurs ne doivent pas proc der ces raccordements eux m mes mais doivent plut t faire appel aux pouvoirs de r glementation en cause ou un lectricien selon le cas Bay Networks Inc 4401 Great America Parkway Santa Clara CA 95054 8 Federal Street Billerica MA 01821 Canada Requirements Only continued D O C Explanatory Notes Equipment Attachment Limitations The Can
12. nt sur le brouillage radio lectrique du minist re des Communications du Canada Bay Networks Inc 4401 Great America Parkway Santa Clara CA 95054 8 Federal Street Billerica MA 01821 Bay Networks Software License Note This is Bay Networks basic license document In the absence of a software license agreement specifying varying terms this license or the license included with the particular product shall govern licensee s use of Bay Networks software This Software License shall govern the licensing of all software provided to licensee by Bay Networks Software Bay Networks will provide licensee with Software in machine readable form and related documentation Documentation The Software provided under this license is proprietary to Bay Networks and to third parties from whom Bay Networks has acquired license rights Bay Networks will not grant any Software license whatsoever either explicitly or implicitly except by acceptance of an order for either Software or for a Bay Networks product Equipment that is packaged with Software Each such license is subject to the following restrictions L Upon delivery of the Software Bay Networks grants to licensee a personal nontransferable nonexclusive license to use the Software with the Equipment with which or for which it was originally acquired including use at any of licensee s facilities to which the Equipment may be transferred for the useful life
13. of the Equipment unless earlier terminated by default or cancellation Use of the Software shall be limited to such Equipment and to such facility Software which is licensed for use on hardware not offered by Bay Networks is not subject to restricted use on any Equipment however unless otherwise specified on the Documentation each licensed copy of such Software may only be installed on one hardware item at any time Licensee may use the Software with backup Equipment only if the Equipment with which or for which it was acquired is inoperative Licensee may make a single copy of the Software but not firmware for safekeeping archives or backup purposes Licensee may modify Software but not firmware or combine it with other software subject to the provision that those portions of the resulting software which incorporate Software are subject to the restrictions of this license Licensee shall not make the resulting software available for use by any third party Neither title nor ownership to Software passes to licensee Licensee shall not provide or otherwise make available any Software in whole or in part in any form to any third party Third parties do not include consultants subcontractors or agents of licensee who have licensee s permission to use the Software at licensee s facility and who have agreed in writing to use the Software only in accordance with the restrictions of this license Third party owners from whom Bay Netwo
14. r Refer to Installing and Maintaining BN Routers and use the same instructions as for replacing a FRE FRE 2 module When you remove the ARE processor module from the router be sure to place it on a clean nonconductive surface antistatic wrist strap whenever you remove install or handle electronic components For additional information on how to use an antistatic wrist strap refer to Installing and Maintaining BN Routers Caution Electrostatic discharge can damage hardware You must wear an Installing the ARE 16 MB Memory Upgrade Modules To install the VBM module 1 Align the two connectors on the VBM module with the connectors on the ARE processor module Figure 1 Also align the mounting holes on the VBM module with the standoffs on the ARE module Then press the upgrade module into place Mounting holes Mounting holes Connectors A160001A Figure 1 Aligning the VBM Module 2 In each of the four mounting holes on the VBM module insert a Phillips screw Use a Phillips screwdriver to tighten each screw 3 Follow the steps in the next section to remove existing SIMMs so that you can install the memory upgrade SIMMs Installing the ARE 16 MB Memory Upgrade Kit Removing SIMMs from the ARE Processor Module 1 Using Figure 2 as a reference locate SIMM sockets U7 and U14 on your ARE processor module There will be a SIMM in each of these sockets 2 QO000000000 0000000000000 000000000 ppp
15. ricit des lignes t l phoniques et de la tuyauterie m tallique interne sont raccord es ensemble Cette mesure de s curit est particuli rement importante en milieu rural Attention Les utilisateurs ne doivent pas proc der ces raccordements eux m mes mais doivent plut t faire appel aux pouvoirs de r glementation en cause ou un lectricien selon le cas Bay Networks Inc 4401 Great America Parkway Santa Clara CA 95054 8 Federal Street Billerica MA 01821 Canada Requirements Only continued Canadian Department of Communications Radio Interference Regulations This digital apparatus Access Feeder Node Access Link Node Access Node Access Stack Node Backbone Concentrator Node Backbone Concentrator Node Switch Backbone Link Node Backbone Link Node Switch Concentrator Node Feeder Node Link Node does not exceed the Class A limits for radio noise emissions from digital apparatus as set out in the Radio Interference Regulations of the Canadian Department of Communications R glement sur le brouillage radio lectrique du minist re des Communications Cet appareil num rique Access Feeder Node Access Link Node Access Node Access Stack Node Backbone Concentrator Node Backbone Concentrator Node Switch Backbone Link Node Backbone Link Node Switch Concentrator Node Feeder Node Link Node respecte les limites de bruits radio lectriques visant les appareils num riques de classe A prescrites dans le R gleme
16. rks has acquired license rights to software that is incorporated into Bay Networks products shall have the right to enforce the provisions of this license against licensee Licensee shall not remove or obscure any copyright patent trademark trade secret or similar intellectual property or restricted rights notice within or affixed to any Software and shall reproduce and affix such notice on any backup copy of Software or copies of software resulting from modification or combination performed by licensee as permitted by this license Bay Networks Inc 4401 Great America Parkway Santa Clara CA 95054 8 Federal Street Billerica MA 01821 Bay Networks Software License continued 10 11 12 Licensee shall not reverse assemble reverse compile or in any way reverse engineer the Software Note For licensees in the European Community the Software Directive dated 14 May 1991 as may be amended from time to time shall apply for interoperability purposes Licensee must notify Bay Networks in writing of any such intended examination of the Software and Bay Networks may provide review and assistance Notwithstanding any foregoing terms to the contrary if licensee licenses the Bay Networks product Site Manager licensee may duplicate and install the Site Manager product as specified in the Documentation This right is granted solely as necessary for use of Site Manager on hardware installed with licensee s network This l
Download Pdf Manuals
Related Search