Avaya 3900 Series Display-Based Accessory Module Installation Guide
Contents
1. Avaya 3900 Series Display Based Accessory Module Installation Guide This document describes how to install the Display Based Accessory Module DBA NTMN67xx for the 3900 Series Digital Telephones The DBA expands the number of lines and features available to the 3904 and 3905 telephones using soft labeled keys Note Only Phase III 3905 telephones support the DBA The DBA provides three layers of eight programmable line feature keys for a total of 24 keys Use the Page key to move among the three layers Use the Edit command under the Options menu and the dialpad keys to change the default 10 character programmable key labels Note The DBA and Key Based Accessory Module KBA are mutually exclusive A telephone with one or two KBAs configured or installed cannot have a DBA Figure 1 Display Based Accessory Module DBA Programmable line feature keys Plug into the 10 pin slot Page key 553 9554 N0023536 1 of 3 Standard 2 00 Avaya 3900 Series Display Based Accessory Module Installation Guide Installing the 1 While depressing the telephone tilt handle pull the telephone away from the footstand until it clears the final stop Gently pull the footstand off the clips Display Based 2 Place the telephone and the Display Based Accessory Module face down on Accessory Module a non abrasive surface and align them 3 Lower the Module into place and insert the 10 pin plug on the Module into the 10 pin2. isplay Based Accessory Module Installation Guide Configuring the Meridian SL 100 for the Display Based Accessory Module in Servord N0023536 Prompt Response Description ADO Line X X Line or DN x x Line or DN number OPTKEY 1 Option key OPTION DBA Display Based Accessory Module 3 of 3 Standard 2 00
3. slot on the telephone Push in gently until they snap into place A Insert the clips on the telephone into the hinges on the footstand then press on the front of the footstand until it snaps into place 5 While depressing the telephone tilt handle swing the footstand into the desired position then release the handle 6 Carefully turn the new assembly upright Configuring the Prompt Response Description Meridian 1 for the Display Based REG Ap oe new data ange existing data Accessory Module inLD 11 TYPE 3904 Only 3904 and 3905 support the Display Based 3905 Accessory Module KBA 0 Key Based Accessory Module Number of KBAs 0 default DBA 0 1 Display Based Accessory Module Number of DBAs 0 default 1 DBA Note The Key Based Accessory Module and the Display Based Accessory Module are mutually exclusive A telephone cannot have both installed or configured That is if a non zero value is input for KBA any non zero value entered at the DBA prompt results in an error message FDN XXX X Note 1 The Display Based Accessory Module prompt DBA appears when the telephone type is 3904 or 3905 Note 2 Each Display Based Accessory Module provides 24 additional programmable line feature keys These additional keys are configured in LD 11 Key numbers associated with the Display Based Accessory Module are 32 through 55 33 through 56 for the Meridian S10 Standard 2 00 2 of 3 N0023536 Avaya 3900 Series D
Download Pdf Manuals
Related Search